Home/Catalog/APRISAXE-EVENTS-4RF

APRISAXE-EVENTS-4RF

AI MIB Summary

The APRISAXE-EVENTS-4RF MIB module facilitates event notification and alarm reporting for AprisaXE 4RF wireless access points and base stations, specifically tracking radio frequency link status, interface state transitions, and hardware fault conditions within the AprisaXE network infrastructure.

Event MIB for the AprisaXE project
Main OID:
aprisaXE4RFEventModule.1.3.6.1.4.1.14817.2.7
82
Objects
Active
Status
8
Dependencies

Imported Objects

Objects

82 total
Object Name
aprisaXE4RFEventModuleEvent MIB for the AprisaXE project
MODULE-IDENTITY
.1.3.6.1.4.1.14817.2.7
aprisaXEEventValues
OBJECT IDENTIFIER
.1.3.6.1.4.1.14817.7.3.1.2.1000
aprisaXEEventAlarmStatusThe status of an alarm event.ro
FourRFAlarmPresent (COMMON-TC-4RF)
.1.3.6.1.4.1.14817.7.3.1.2.1000.1
aprisaXEEventAlarmSeverityThe severity of the alarm.ro
FourRFAlarmSeverity (COMMON-TC-4RF)
.1.3.6.1.4.1.14817.7.3.1.2.1000.2
aprisaXEEventAlarmValueIndicatesthe current value.ro
Integer32
.1.3.6.1.4.1.14817.7.3.1.2.1000.3
aprisaXEEventAlarmThresholdIndicates the level at which the alarm was set.ro
Integer32
.1.3.6.1.4.1.14817.7.3.1.2.1000.4
aprisaXEEventAlarmTypeThe alarm type.ro
AprisaXEAlarmType (APRISAXE-TC-4RF)
.1.3.6.1.4.1.14817.7.3.1.2.1000.5
aprisaXEEventCardExpectedThe type of MUX card expected in a slot.ro
AprisaXECardType (APRISAXE-TC-4RF)
.1.3.6.1.4.1.14817.7.3.1.2.1000.6
aprisaXEEventCardInstalledThe type of MUX card found in a slot.ro
AprisaXECardType (APRISAXE-TC-4RF)
.1.3.6.1.4.1.14817.7.3.1.2.1000.7
aprisaXEEventCardSlotThe slot containing the unexpected card.ro
AprisaXESlotNumber (APRISAXE-TC-4RF)
.1.3.6.1.4.1.14817.7.3.1.2.1000.8
aprisaXEEventCardStatusIndicates whether the alarm is present or has been cleared.ro
FourRFAlarmPresent (COMMON-TC-4RF)
.1.3.6.1.4.1.14817.7.3.1.2.1000.9
aprisaXEEventCardPortThe port reporting the event.ro
AprisaXEPortNumber (APRISAXE-TC-4RF)
.1.3.6.1.4.1.14817.7.3.1.2.1000.10
aprisaXEEventCharacterisationStatusIndicates whether the characterisation is valid or invalid.ro
AprisaXEDataStatus (APRISAXE-TC-4RF)
.1.3.6.1.4.1.14817.7.3.1.2.1000.15
aprisaXEEventMibStatusIndicates whether the MIB is valid or invalid.ro
AprisaXEDataStatus (APRISAXE-TC-4RF)
.1.3.6.1.4.1.14817.7.3.1.2.1000.16
aprisaXELinkAlarmsEventsThe events for the link alarms.
OBJECT IDENTIFIER
.1.3.6.1.4.1.14817.7.3.1.3.1
aprisaXELinkAlarmsEventsV2The SNMPv2 events for the link alarms.
OBJECT IDENTIFIER
.1.3.6.1.4.1.14817.7.3.1.3.1.0
aprisaXEThresholdAlarmEventEvent indicating a change in state of a threshold alarm. It will be sent whenever the status of the alarm changes from noAlarm to alarmPresent and vice versa.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.1
aprisaXERxSynthOutOfLockAlarmEventEvent indicating a change in state of the Rx synthesizer out of lock alarm. It will be sent whenever the status of the alarm changes from noAlarm to alarmPresent and vice versa.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.10
aprisaXEAlarmRxCDataEventEvent indicating a change in state of the receiver characterisation data alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.11
aprisaXEAlarmRx12VStatusEventEvent indicating a change in state of the Rx synthesizer out of lock alarm. It will be sent whenever the status of the alarm changes from noAlarm to alarmPresent and vice versa.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.12
aprisaXEAlarmRxOffEventEvent indicating a change in state of receiver, when it is turned on or off. It will be sent whenever the status of the alarm changes from noAlarm to alarmPresent and vice versa.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.13
aprisaXEAlarmRxBadMibEventEvent indicating a change in state of the receiver MIB data alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.14
aprisaXEAlarmTxCDataEventEvent indicating a change in state of the transmitter characterisation data alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.20
aprisaXEAlarmTxSynthOutOfLockEventEvent indicating a change in state of the transmitter synthesiser out of lock alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.21
aprisaXEAlarmTx28VStatusEventEvent indicating a change in state of the transmitter 28V supply status alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.22
aprisaXEAlarmTx11VStatusEventEvent indicating a change in state of the transmitter 11V supply status alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.23
aprisaXEAlarmTx5VStatusEventEvent indicating a change in state of the transmitter 5V digital supply status alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.24
aprisaXEAlarmTxAmplifierBalanceEventEvent indicating a change in state of the transmitter amplifier balance status alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.25
aprisaXEAlarmTxBadMibEventEvent indicating a change in state of the transmitter MIB data alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.26
aprisaXEAlarmTxNeg5VStatusEventEvent indicating a change in state of the transmitter Negative 5V digital supply status alarm.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.27
aprisaXEModemSyncEventEvent indicating a change in state of the modem lock.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.30
aprisaXEModemTDMAlignmentEventEvent indicating a change in state of the modem TDM alignment.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.31
aprisaXEModemDemodAlignmentEventEvent indicating a change in state of the modem demodulator alignment.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.32
aprisaXEModemRefAStatusEventEvent indicating a change in state of the Ref A clock.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.33
aprisaXEModemRefBStatusEventEvent indicating a change in state of the Ref B clock.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.34
aprisaXEModemUCEPresentEventEvent indicating the presence of uncorrectable errors.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.35
aprisaXEQuadE1LOSEventEvent indicating a change in LOS state for a port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.40
aprisaXEQuadE1AISEventEvent indicating a change in AIS state for a port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.41
aprisaXEQuadE1RAIEventEvent indicating a change in RAI state for a port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.42
aprisaXEQuadE1RMAIEventEvent indicating a change in RMAI state for a port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.43
aprisaXEQuadE1TS16AISEventEvent indicating a change in TS16AIS state for a port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.44
aprisaXEQuadE1TS16LOSEventEvent indicating a change in TS16LOS state for a port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.45
aprisaXEQuadE1LOFEventEvent indicating a change in loss of frame state for a port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.46
aprisaXEFXOCodecOvldEventEvent indicating a change in Codec Ovld state for a port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.50
aprisaXEFXOBillToneOvldEventEvent indicating a change in Billing Tone Ovld state for a port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.51
aprisaXEFXOCurrentOvldEventEvent indicating a change in Current Ovld state for a port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.52
aprisaXEFXOUnplugEventEvent indicating a change in Unplug state for a port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.53
aprisaXEFXSCalibrateErrorEventEvent indicating a common mode error during Pro-SLIC initialisation.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.60
aprisaXEFXSDCDCErrorEventEvent indicating a DC-DC converter error during Pro-SLIC initialisation
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.61
aprisaXEFXSCASLockEventEvent indicating the FPGA has not locked onto a CAS frame.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.62
aprisaXEHSSTDMLockEventEvent indicating an HSS TDM Lock error.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.70
aprisaXEHSS32MHzResetEventEvent indicating a 32MHz clock reset error.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.71
aprisaXEHSSTDMResetEventEvent indicating a TDM reset error.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.72
aprisaXEHSSPatternLossEventEvent indicating a Pattern Loss error.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.73
aprisaXEHSSRxFifoFullEventEvent indicating an Rx FIFO Full error.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.74
aprisaXEHSSRxFifoEmptyEventEvent indicating an Rx FIFO Empty error.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.75
aprisaXEHSSTxFifoFullEventEvent indicating a Tx FIFO Full error.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.76
aprisaXEHSSTxFifoEmptyEventEvent indicating a Tx FIFO Empty error.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.77
aprisaXEHSSRxClockValidEventEvent indicating an Rx Clock Valid error.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.78
aprisaXEHSSTxClockValidEventEvent indicating a Tx Clock Valid error.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.79
aprisaXEV24ControlLineLossEventEvent indicating V24 control line aren't in sync.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.80
aprisaXEUnexpectedCardEventEvent indicating an mismatch between the MIB and the installed MUX cards. The radio will not operate correctly if the MIB and MUX cards do not match.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.100
aprisaXECLKSyncEventEvent indicating a change in state of the clock sync state.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.110
aprisaXENetClkConfigEventEvent indicating a change in state of the network clock config.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.111
aprisaXECharacterisationEEFailEventEvent indicating a failed read of characterisation data from EEPROM.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.120
aprisaXEMibEEFailEventEvent indicating a failed read of mib data from EEPROM.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.121
aprisaXEMhsbSwitchToStandbyEventEvent indicating a Monitored Hot Standby switch to Standby Event.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.130
aprisaXEAlternateImageTableEventEvent indicating an Alternate Image Table Event.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.131
aprisaXEDefaultImageTableEventEvent indicating a Default Image Table Event.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.132
aprisaXEUploadFailEventEvent indicating the failure of the previous upload.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.133
aprisaXEPscDemuxAlignmentEventEvent indicating a change in state of the PSC Demux alignment .
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.140
aprisaXEPscTDMAlignmentEventEvent indicating a change in state of the PSC TDM alignment.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.141
aprisaXEPscMuxAlignmentErrorEventEvent indicating if the TDM mux loses alignment to the TDM bus.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.142
aprisaXEPscCompanionTxFailEventEvent indicating that the HRSD Companion transmitter has failed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.143
aprisaXEPscSoftwareOverrideEventEvent indicating a software override of the PSC Mode Switch.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.144
aprisaXEPscInvalidSwitchValueEventEvent indicating that the PSC Mode Switch value is invalid.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.145
aprisaXEDualE1LOSEventEvent indicating a change in LOS state for a port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.150
aprisaXEDualE1AISEventEvent indicating a change in AIS state for a port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.151
aprisaXESingleE1LOSEventEvent indicating a change in LOS state for a port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.160
aprisaXESingleE1AISEventEvent indicating a change in AIS state for a port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.161
aprisaXEHrsdCompareOidEventEvent indicating that an OID failed its comparison check.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.170
aprisaXEHrsdCompanionLostEventEvent indicating that the HRSD Companion Heartbeat is lost.
NOTIFICATION-TYPE
.1.3.6.1.4.1.14817.7.3.1.3.1.0.171
APRISAXE-EVENTS-4RF - SNMP MIB Reference | MIBs Explorer