APPLICATION-MIB
AI MIB Summary
The APPLICATION-MIB provides standardized SNMP objects to monitor generic application-level metrics, such as process states, resource utilization, and operational status, within managed network elements. It enables the tracking of application-specific instrumentation data that is not covered by device hardware or lower-layer protocol MIBs.
This MIB defines objects representing generic aspects of applications that are of interest to management but typically require instrumentation within managed application elements.
Main OID:
applicationMib.1.3.6.1.2.1.62
170
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
170 total| Object Name |
|---|
applicationMibThis MIB defines objects representing generic aspects of applications that are of interest to management but typically require instrumentation within managed application elements. MODULE-IDENTITY .1.3.6.1.2.1.62 |
applicationMibObjects OBJECT IDENTIFIER .1.3.6.1.2.1.62.1 |
applServiceGroup OBJECT IDENTIFIER .1.3.6.1.2.1.62.1.1 |
applSrvNameToSrvInstTableThe service name to service instance table uses service name as its primary key, and service instance identifier as its secondary key. It facilitates the identification and lookup of the instances of a given service in a system. SEQUENCE OF ApplSrvNameToSrvInstEntry .1.3.6.1.2.1.62.1.1.1 |
applSrvNameToSrvInstEntryAn applSrvNameToSrvInstEntry identifies an instance of a given service. The allocation and reservation of unique values for applSrvIndex is an administrative issue. An applSrvNameToSrvInstEntry exists for the lifetime of that instance of that service; the index values may not change during that lifetime. ApplSrvNameToSrvInstEntry .1.3.6.1.2.1.62.1.1.1.1 |
applSrvInstQualThe value of applSrcInstQual provides additional information about this particular instance of this service. Although not used for indexing purposes, the value of this attribute should be sufficiently unique to be helpful to an administrator in distinguishing among service instances.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.2.1.62.1.1.1.1.1 |
applSrvInstToSrvNameTableThe service instance to service name table uses service instance identifier as its primary key, and service name as its secondary key. Given a service instance identifier, it facilitates the lookup of the name of the service being provided. SEQUENCE OF ApplSrvInstToSrvNameEntry .1.3.6.1.2.1.62.1.1.2 |
applSrvInstToSrvNameEntryAn applSrvInstToSrvNameEntry maps a service instance identifier back to a service name. ApplSrvInstToSrvNameEntry .1.3.6.1.2.1.62.1.1.2.1 |
applSrvNameThe human-readable name of a service. Where appropriate, as in the case where a service can be identified in terms of a single protocol, the strings should be established names such as those assigned by IANA and found in STD 2 [13], or defined by some other authority. In some cases private conventions apply and the string should in these cases be consistent with these non-standard conventions. An applicability statement may specify the service name(s) to be used.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.2.1.62.1.1.2.1.1 |
applSrvInstToRunApplElmtTableThe service instance to running application element table uses the service instance identifier as its primary key, and the running application element index as its secondary key. This facilitates the identification of the set of running application elements providing a given instance of a service. SEQUENCE OF ApplSrvInstToRunApplElmtEntry .1.3.6.1.2.1.62.1.1.3 |
applSrvInstToRunApplElmtEntryAn applSrvInstToRunApplElmtEntry identifies a running application element providing an instance of a service. Note that there may be multiple running application elements involved in the provision of an instance of a service. ApplSrvInstToRunApplElmtEntry .1.3.6.1.2.1.62.1.1.3.1 |
applSrvIndexAn applSrvIndex is the system-unique identifier of an instance of a service. The value is unique not only across all instances of a given service, but also across all services in a system. Re-use of values for this index should be avoided. No two service instances in a given system shall concurrently have the same value for this index. The value zero is excluded from the set of permitted values for this index. This allows other tables to potentially represent things which cannot be associated with a specific service instance.ro Unsigned32 (1..'ffffffff'h) .1.3.6.1.2.1.62.1.1.3.1.1 |
applRunApplElmtToSrvInstTableThe running application element to service instance table uses the running application element index as its primary key and the service instance identifier as its secondary key. It identifies the set of services provided by a given running application element. SEQUENCE OF ApplRunApplElmtToSrvInstEntry .1.3.6.1.2.1.62.1.1.4 |
applRunApplElmtToSrvInstEntryAn applRunApplElmtToSrvInstEntry serves to identify an instance of a service being provided by a given running application element. Note that a particular running application element may provide multiple services. ApplRunApplElmtToSrvInstEntry .1.3.6.1.2.1.62.1.1.4.1 |
applSrvInstanceAn applSrvInstance is the system-unique identifier of an instance of a service. The value is unique not only across all instances of a given service, but also across all services. Re-use of values for this index should be avoided. No two service instances in a given system shall concurrently have the same value for this index. The value zero is excluded from the set of permitted values for this index. This allows other tables to potentially represent things which cannot be associated with a specific service instance. This attribute is semantically identical to applSrvIndex.ro Unsigned32 (1..'ffffffff'h) .1.3.6.1.2.1.62.1.1.4.1.1 |
applChannelGroup OBJECT IDENTIFIER .1.3.6.1.2.1.62.1.2 |
applOpenChannelTableThe applOpenChannelTable reports information on open channels for running application elements and for service instances. This table is indexed by applElmtOrSvc, applElmtOrSvcId, and applOpenChannelIndex. This effectively groups all entries for a given running application element or service instance together. ApplChannelIndex uniquely identifies an open channel (and, consequently, a file or connection) within the context of a particular running application element or service instance. Some of the information in this table is available through both sixty-four and thirty-two bit counters. The sixty-four bit counters are not accessible in protocols that do not support this data type. SEQUENCE OF ApplOpenChannelEntry .1.3.6.1.2.1.62.1.2.1 |
applOpenChannelEntryAn applOpenChannelEntry indicates that a channel has been opened by this running application element or service instance and is still open. Note that if a file has been opened multiple times, even by the same process, it will have multiple channel entries. ApplOpenChannelEntry .1.3.6.1.2.1.62.1.2.1.1 |
applElmtOrSvcThe applElmtOrSvc attribute serves as an index for tables that can hold information both for individual running application elements as well as for service instances. If the value is service(1), the row contains information gathered at the level of a service. If the value is element(2), the row contains information for an individual running application element. Enumeration .1.3.6.1.2.1.62.1.2.1.1.1 |
applElmtOrSvcIdThe applElmtOrSvcId attribute is used as an index in conjunction with the applElmtOrSvc attribute. When the value of applElmtOrSvc is service(1), this attribute's value corresponds to that of applSrvIndex, when the value of applElmtOrSvc is element(2), this attribute's value corresponds to sysApplElmtRunIndex. Unsigned32 (1..'ffffffff'h) .1.3.6.1.2.1.62.1.2.1.1.2 |
applOpenChannelIndexThis attribute serves to uniquely identify this open connection in the context of the running application element or service instance. Where suitable, the application's native descriptor number should be used. Unsigned32 .1.3.6.1.2.1.62.1.2.1.1.3 |
applOpenChannelOpenTimeThis attribute records the value of sysUpTime.0 when this channel was opened and this entry was added to this table. This attribute serves as a discontinuity indicator for the counter attributes in this entry and for any corresponding entries in the applOpenConnectionTable, applOpenFileTable, and the applTransactionStreamTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.2.1.62.1.2.1.1.4 |
applOpenChannelReadRequestsThis attribute reports the number of read requests for this channel. All read requests for this channel by this entity, regardless of completion status, are included in this count. Read requests are counted in terms of system calls, rather than API calls. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry.ro Counter64 UNITS "read requests" .1.3.6.1.2.1.62.1.2.1.1.5 |
applOpenChannelReadRequestsLowThis attribute reports the low thirty-two bits of applOpenChannelReadRequests. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry.ro Counter32 UNITS "read requests" .1.3.6.1.2.1.62.1.2.1.1.6 |
applOpenChannelReadFailuresThis attribute reports the number of failed read requests. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry.ro Counter32 UNITS "failed read requests" .1.3.6.1.2.1.62.1.2.1.1.7 |
applOpenChannelBytesReadThis attribute reports the number of bytes read from this channel. Only bytes successfully read are included in this count. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry.ro Counter64 UNITS "bytes" .1.3.6.1.2.1.62.1.2.1.1.8 |
applOpenChannelBytesReadLowThis attribute corresponds to the low thirty-two bits of applOpenChannelBytesRead. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry.ro Counter32 UNITS "bytes" .1.3.6.1.2.1.62.1.2.1.1.9 |
applOpenChannelLastReadTimeThis attribute reports the time of the most recent read request made by this entity, regardless of completion status, for this open channel. If no read requests have been made the value of this attribute shall be '0000000000000000'Hro DateAndTime (SNMPv2-TC) .1.3.6.1.2.1.62.1.2.1.1.10 |
applOpenChannelWriteRequestsThis attribute reports the number of write requests for this channel made by this entity. All write requests for this channel, regardless of completion status, are included in this count. Write requests are counted in terms of system calls, rather than API calls. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry.ro Counter64 UNITS "write requests" .1.3.6.1.2.1.62.1.2.1.1.11 |
applOpenChannelWriteRequestsLowThis attribute corresponds to the low thirty-two bits of applOpenChannelWriteRequests. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry.ro Counter32 UNITS "write requests" .1.3.6.1.2.1.62.1.2.1.1.12 |
applOpenChannelWriteFailuresThis attribute reports the number of failed write requests. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry.ro Counter32 UNITS "failed write requests" .1.3.6.1.2.1.62.1.2.1.1.13 |
applOpenChannelBytesWrittenThis attribute reports the number of bytes written to this channel. Only bytes successfully written (without errors reported by the system to the API in use by the application) are included in this count. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry.ro Counter64 UNITS "bytes" .1.3.6.1.2.1.62.1.2.1.1.14 |
applOpenChannelBytesWrittenLowThis attribute corresponds to the low thirty-two bits of applOpenChannelBytesWritten. Discontinuities in this counter can be detected by monitoring the applOpenChannelOpenTime value for this entry.ro Counter32 UNITS "bytes" .1.3.6.1.2.1.62.1.2.1.1.15 |
applOpenChannelLastWriteTimeThis attribute reports the time of the most recent write request made by this running application element or service instance, regardless of completion status, for this open channel. If no write requests have been made, the value of this attribute shall be '0000000000000000'Hro DateAndTime (SNMPv2-TC) .1.3.6.1.2.1.62.1.2.1.1.16 |
applOpenFileTableThe applOpenFileTable reports information on open files for service instances or application elements. This table is indexed by applElmtOrSvc and applElmtOrSvcId, effectively grouping all entries for a given running service instance or application element together, and by applOpenChannelIndex, uniquely identifying an open channel (and, consequently, a file) within the context of a particular service instance or application element. Elements in this table correspond to elements in the applOpenChannelTable that represent files. For rows in the applOpenChannelTable that do not represent files, corresponding rows in this table will not exist. SEQUENCE OF ApplOpenFileEntry .1.3.6.1.2.1.62.1.2.2 |
applOpenFileEntryAn applOpenFileEntry indicates that a file has been opened by this running application element and is still open. Note that if a file has been opened multiple times, even by the same process, it will have multiple entries. ApplOpenFileEntry .1.3.6.1.2.1.62.1.2.2.1 |
applOpenFileNameThis attribute reports the name of this open file. Wherever practical, a fully qualified path name should be reported. The values 'stdin', 'stdout', and 'stderr' are reserved in accordance with common usage when the fully qualified path name cannot be determined.ro LongUtf8String (SYSAPPL-MIB) .1.3.6.1.2.1.62.1.2.2.1.1 |
applOpenFileSizeHighThis file's current size in 2^32 byte blocks. For example, for a file with a total size of 4,294,967,296 bytes, this attribute would have a value of 1; for a file with a total size of 4,294,967,295 bytes this attribute's value would be 0.ro Unsigned32 UNITS "2^32 byte blocks" .1.3.6.1.2.1.62.1.2.2.1.2 |
applOpenFileSizeLowThis file's current size modulo 2^32 bytes. For example, for a file with a total size of 4,294,967,296 bytes this attribute would have a value of 0; for a file with a total size of 4,294,967,295 bytes this attribute's value would be 4,294,967,295.ro Unsigned32 UNITS "bytes" .1.3.6.1.2.1.62.1.2.2.1.3 |
applOpenFileModeThis attribute reports the current mode of this file from the perspective of this running application element. These values have the following meanings: read(1) - file opened for reading only write(2) - file opened for writing only readWrite(3) - file opened for read and write. These values correspond to the POSIX/ANSI C library function fopen() 'type' parameter, using the following mappings: r -> read(1) w -> write(2) a -> write(2) + -> readWrite(3)ro Enumeration .1.3.6.1.2.1.62.1.2.2.1.4 |
applOpenConnectionTableThe applOpenConnectionTable provides information about open and listening connections from the perspective of a running application element or service instance. Entries in this table are indexed by applElmtOrSvc, applElmtOrSvcID, and by applOpenChannelIndex, which serves to uniquely identify each connection in the context of a service instance or running application element. For each row in this table, a corresponding row will exist in the applOpenChannel table. For rows in the applOpenChannelTable which do not represent open or listening connections, no corresponding rows will exist in this table. SEQUENCE OF ApplOpenConnectionEntry .1.3.6.1.2.1.62.1.2.3 |
applOpenConnectionEntryAn applOpenConnectionEntry indicates that a running application element or service instance has an open connection. The entry has information describing that connection. In the case of a TCP transport, the element applOpenConnectionNearEndAddr and that row's applOpenConnectionFarEndAddr would correspond to a tcpConnEntry. For a UDP transport, a similar relationship exists with respect to a udpEntry. ApplOpenConnectionEntry .1.3.6.1.2.1.62.1.2.3.1 |
applOpenConnectionTransportThe applOpenConnectionTransport attribute identifies the transport protocol in use for this connection. If it is not practical to determine the underlying transport, this attribute's value shall have a value of {0 0}.ro TDomain (SNMPv2-TC) .1.3.6.1.2.1.62.1.2.3.1.1 |
applOpenConnectionNearEndAddrThe applOpenConnectionNearEndAddr attribute reports the transport address and port information for the near end of this connection. If the value is not known, the value has a length of zero.ro ApplTAddress .1.3.6.1.2.1.62.1.2.3.1.2 |
applOpenConnectionNearEndpointThe applOpenConnectionNearEndpoint attribute reports the fully-qualified domain name and port information for the near end of this connection. The format of this attribute for TCP and UDP-based protocols is the fully-qualified domain name immediately followed by a colon which is immediately followed by the decimal representation of the port number. If the value is not known, the value has a length of zero.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.2.1.62.1.2.3.1.3 |
applOpenConnectionFarEndAddrThe applOpenConnectionFarEndAddr attribute reports the transport address and port information for the far end of this connection. If not known, as in the case of a connectionless transport, the value of this attribute shall be a zero-length string.ro ApplTAddress .1.3.6.1.2.1.62.1.2.3.1.4 |
applOpenConnectionFarEndpointThe applOpenConnectionFarEndpoint attribute reports the fully-qualified domain name and port information for the far end of this connection. The format of this attribute for TCP and UDP-based protocols is the fully-qualified domain name immediately followed by a colon which is immediately followed by the decimal representation of the port number. If not known, as in the case of a connectionless transport, the value of this attribute shall be a zero-length string.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.2.1.62.1.2.3.1.5 |
applOpenConnectionApplicationThe applOpenConnectionApplication attribute identifies the application layer protocol in use. If not known, the value of this attribute shall be a zero-length string. When possible, protocol names should be those used in the 'ASSIGNED NUMBERS' [13]. For example, an SMTP mail server would use 'SMTP'.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.2.1.62.1.2.3.1.6 |
applTransactionStreamTableThe applTransactionStreamTable contains common information for transaction statistic accumulation. SEQUENCE OF ApplTransactionStreamEntry .1.3.6.1.2.1.62.1.2.4 |
applTransactionStreamEntryAn applTransactionStreamEntry contains information for a single transaction stream. A transaction stream can be a network connection, file, or other source of transactions. ApplTransactionStreamEntry .1.3.6.1.2.1.62.1.2.4.1 |
applTransactStreamDescrThe applTransactStreamDescr attribute provides a human-readable description of this transaction stream. If no descriptive information is available, this attribute's value shall be a zero-length string.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.2.1.62.1.2.4.1.1 |
applTransactStreamUnitOfWorkThe applTransactStreamUnitOfWork attribute provides a human-readable definition of what the unit of work is for this transaction stream. If no descriptive information is available, this attribute's value shall be a zero-length string.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.2.1.62.1.2.4.1.2 |
applTransactStreamInvokesCumulative count of requests / invocations issued. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime.ro Counter64 UNITS "transactions" .1.3.6.1.2.1.62.1.2.4.1.3 |
applTransactStreamInvokesLowThis counter corresponds to the low thirty-two bits of applTransactStreamInvokes. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime.ro Counter32 UNITS "transactions" .1.3.6.1.2.1.62.1.2.4.1.4 |
applTransactStreamInvCumTimesThe applTransactStreamInvCumTimes attribute reports the cumulative sum of the lengths of the intervals measured between the transmission of requests and the receipt of (the first of) the corresponding response(s). Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime.ro Counter32 UNITS "milliseconds" .1.3.6.1.2.1.62.1.2.4.1.5 |
applTransactStreamInvRspTimesThe applTransactStreamInvRspTimes attribute reports the cumulative sum of the lengths of the intervals measured between the receipt of the first and last of multiple responses to a request. For transaction streams which do not permit multiple responses to a single request, this attribute will be constant. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime.ro Counter32 UNITS "milliseconds" .1.3.6.1.2.1.62.1.2.4.1.6 |
applTransactStreamPerformsCumulative count of transactions performed. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime.ro Counter64 UNITS "transactions" .1.3.6.1.2.1.62.1.2.4.1.7 |
applTransactStreamPerformsLowThis counter reports the low thirty-two bits of applTransactStreamPerforms. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime.ro Counter32 UNITS "transactions" .1.3.6.1.2.1.62.1.2.4.1.8 |
applTransactStreamPrfCumTimesThe applTransactStreamPrfCumTimes attribute reports the cumulative sum of the interval lengths measured between receipt of requests and the transmission of the corresponding responses. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime.ro Counter32 UNITS "milliseconds" .1.3.6.1.2.1.62.1.2.4.1.9 |
applTransactStreamPrfRspTimesFor each transaction performed, the elapsed time between when the first response is enqueued and when the last response is enqueued is added to this cumulative sum. For single-response protocols, the value of applTransactStreamPrfRspTimes will be constant. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime.ro Counter32 UNITS "milliseconds" .1.3.6.1.2.1.62.1.2.4.1.10 |
applTransactFlowTableThe applTransactFlowTable contains entries, organized by application instance or running application element, direction of flow, and type (request/response) for each open transaction stream. The simple model of a transaction used here looks like this: invoker | Request | performer | - - - - - - > | | | | Response | | < - - - - - - | | | Since in some protocols it is possible for an entity to take on both the invoker and performer roles, information here is accumulated for transmitted and received requests, as well as for transmitted and received responses. Counts are maintained for both transactions and bytes transferred. SEQUENCE OF ApplTransactFlowEntry .1.3.6.1.2.1.62.1.2.5 |
applTransactFlowEntryAn applTransactFlowEntry reports transaction throughput information for requests or response in a particular direction (transmit / receive) for a transaction stream. Entries in this table correspond to those in the applTransactionStreamTable with identical values for the applElmtOrSvc, applElmtOrSvcId, and applOpenChannelIndex. For all counter objects in one of these entries, the corresponding (same value for applElmtOrSvc, applElmtOrSvcId, and applOpenChannelIndex) applOpenChannelOpenTime object serves as a discontinuity indicator. ApplTransactFlowEntry .1.3.6.1.2.1.62.1.2.5.1 |
applTransactFlowDirectionThe applTransactFlowDirection index serves to identify an entry as containing information pertaining to the transmit (1) or receive (2) flow of a transaction stream. Enumeration .1.3.6.1.2.1.62.1.2.5.1.1 |
applTransactFlowReqRspThe value of the applTransactFlowReqRsp index indicates whether this entry contains information on requests (1), or responses (2). Enumeration .1.3.6.1.2.1.62.1.2.5.1.2 |
applTransactFlowTransThe applTransactFlowTrans attribute reports the number of request/response transactions (as indicated by the applTransactFlowReqRsp index) received/generated (as indicated by the applTransactFlowDirection index) that this service instance or running application element has processed for this transaction stream. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime.ro Counter64 UNITS "transactions" .1.3.6.1.2.1.62.1.2.5.1.3 |
applTransactFlowTransLowThis attribute corresponds to the low thirty-two bits of applTransactFlowTrans. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime.ro Counter32 UNITS "transactions" .1.3.6.1.2.1.62.1.2.5.1.4 |
applTransactFlowBytesThe applTransactFlowBytes attribute reports the number of request/response (as indicated by the applTransactFlowReqRsp index) bytes received/generated (as indicated by the applTransactFlowDirection index) handled by this application element or service instance on this transaction stream. All application layer bytes are included in this count, including any application layer wrappers, headers, or other overhead. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime.ro Counter64 UNITS "bytes" .1.3.6.1.2.1.62.1.2.5.1.5 |
applTransactFlowBytesLowThis attribute corresponds to the low thirty-two bits of applTransactFlowBytes. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime.ro Counter32 UNITS "bytes" .1.3.6.1.2.1.62.1.2.5.1.6 |
applTransactFlowTimeThe applTransactFlowTime attribute records the time of the processing (receipt or transmission as indicated by the applTransactFlowDirection index) by this running application element or service instance of the most recent request/response (as indicated by the applTransactFlowReqRsp index) on this transaction stream. If no requests/responses been received/transmitted by this entity over this transaction stream, the value of this attribute shall be '0000000000000000'Hro DateAndTime (SNMPv2-TC) .1.3.6.1.2.1.62.1.2.5.1.7 |
applTransactKindTableThe applTransactKindTable provides transaction statistics broken down by kinds of transaction. The definition of the kinds of transactions is specific to the application protocol in use, and may be documented in the form of an applicability statement. SEQUENCE OF ApplTransactKindEntry .1.3.6.1.2.1.62.1.2.6 |
applTransactKindEntryAn applTransactKindEntry reports information for a specific service instance or running application element's use of a specific transaction stream in a particular direction in requests or responses (as indicated by the applTransactFlowReqRsp index) broken down by transaction kind, as indicated by the applTransactKind index. Discontinuities in any of the counters in an entry can be detected by monitoring the corresponding instance of applOpenChannelOpenTime. ApplTransactKindEntry .1.3.6.1.2.1.62.1.2.6.1 |
applTransactKindThe applTransactKind index is the human-readable identifier for a particular transaction kind within the context of an application protocol. The values to be used for a particular protocol may be identified in an applicability statement. SnmpAdminString .1.3.6.1.2.1.62.1.2.6.1.1 |
applTransactKindTransThe applTransactKindTrans attribute reports the number of request/response (as indicated by the applTransactFlowReqRsp index) transactions received/generated (as indicated by the applTransactFlowDirection index) handled by this application instance or application element on this transaction stream for this transaction kind. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime.ro Counter64 UNITS "transactions" .1.3.6.1.2.1.62.1.2.6.1.2 |
applTransactKindTransLowThe applTransactKindTransLow attribute reports the low thirty-two bits of applTransactKindTrans. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime.ro Counter32 UNITS "transactions" .1.3.6.1.2.1.62.1.2.6.1.3 |
applTransactKindBytesThe applTransactKindBytes attribute reports the number of request/response (as indicated by the applTransactFlowReqRsp index) bytes received/generated (as indicated by the applTransactFlowDirection index) handled by this application element on this transaction stream for this transaction kind. All application layer bytes are included in this count, including any application layer wrappers, headers, or other overhead. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime.ro Counter64 UNITS "bytes" .1.3.6.1.2.1.62.1.2.6.1.4 |
applTransactKindBytesLowThe applTransactKindBytesLow attribute corresponds to the low thirty-two bits of applTransactKindBytes. Discontinuities in this counter can be detected by monitoring the corresponding instance of applOpenChannelOpenTime.ro Counter32 UNITS "bytes" .1.3.6.1.2.1.62.1.2.6.1.5 |
applTransactKindTimeThe applTransactKindTime attribute records the time of the processing (receipt or transmission as indicated by the applTransactFlowDirection index) by this running application element or service instance of the most recent request/response (as indicated by the applTransactFlowReqRsp index) of this kind of transaction on this transaction stream. If no requests/responses of this kind been received/transmitted by this running application element or service instance over this transaction stream, the value of this attribute shall be '0000000000000000'Hro DateAndTime (SNMPv2-TC) .1.3.6.1.2.1.62.1.2.6.1.6 |
applPastChannelGroup OBJECT IDENTIFIER .1.3.6.1.2.1.62.1.3 |
applPastChannelControlTableThe applPastChannelControlTable controls the accumulation of history information about channels from the perspective of service instances and running application elements. Entries in this table are indexed by applElmtOrSvc and applElmtOrSvcId, giving control of channel history accumulation at the level of each service instance and running application element. SEQUENCE OF ApplPastChannelControlEntry .1.3.6.1.2.1.62.1.3.1 |
applPastChannelControlEntryAn applPastChannelControlEntry provides the ability to control the retention of channel history information by service instances and running application elements. ApplPastChannelControlEntry .1.3.6.1.2.1.62.1.3.1.1 |
applPastChannelControlCollectWhen the value of applPastChannelControlCollect is 'enabled', each time the corresponding running application element or service instance closes an open channel a new entry will be added to the applPastChannelTable. When the value of applPastChannelControlCollect is 'frozen', no new entries are added to the applPastChannelTable for this running application element or service instance, and old entries are not aged out. When the value of applPastChannelControlCollect is 'disabled', all entries are removed from applPastChannelTable for this running application or service instance, and no new entries are added.rw Enumeration .1.3.6.1.2.1.62.1.3.1.1.1 |
applPastChannelControlMaxRowsThe maximum number of entries allowed in the applPastChannelTable for this running application element or service instance. Once the number of rows for this running application element or service instance in the applPastChannelTable reaches this value, when new entries are to be added the management subsystem will make room for them by removing the oldest entries. Entries will be removed on the basis of oldest applPastChannelCloseTime value first.rw Unsigned32 UNITS "channel history entries" .1.3.6.1.2.1.62.1.3.1.1.2 |
applPastChannelControlTimeLimitThe maximum time in seconds which an entry for this running application element or service instance may exist in the applPastChannelTable before it is removed. Any entry that is older than this value will be removed (aged out) from the table, unless the applPastChannelControlCollect is set to 'frozen'. Note that an entry may be aged out prior to reaching this time limit if it is the oldest entry in the table and must be removed to make space for a new entry so as to not exceed applPastChannelControlMaxRows, or if the applPastChannelControlCollect is set to 'disabled'.rw Unsigned32 UNITS "seconds" .1.3.6.1.2.1.62.1.3.1.1.3 |
applPastChannelControlRemItemsThe applPastChannelControlRemItems attribute reports the number of applPastChannelControlTable entries for this running application element or service instance that were deleted in order to make room for new history entries. This count does NOT include entries deleted for the following reasons: - the corresponding applPastChannelControlCollect attribute has been set to 'disabled' - the entry has been in the table longer that the time limit indicated by the corresponding applPastChannelControlTimeLimit.ro Counter32 UNITS "channel history entries" .1.3.6.1.2.1.62.1.3.1.1.4 |
applPastChannelTableThe applPastChannelTable provides history information about channels from the perspective of running application elements and service instances. Entries in this table are indexed by applElmtOrSvc, applElmtOrSvcId, and by applPastChannelIndex, which serves to uniquely identify each former channel in the context of a running application element or service instance. Note that the value of applPastChannelIndex is independent of the value applOpenChannelIndex had when this channel was open. Entries for closed channels for a given running application element or service instance can be added to this table only if its entry in the applPastChannelControlTable has the value 'enabled' for the attribute applPastChannelControlCollect. Entries for closed channels are removed under the following circumstances: - the running application element or service instance no longer exists - the corresponding applPastChannelControlCollect attribute has been set to 'disabled' - the entry has been in the table longer that the time limit indicated by the corresponding applPastChannelControlTimeLimit and the value of applPastChannelControlCollect is not 'frozen' - this is the oldest entry for the running application element or service instance in question and the addition of a new element would otherwise cause applPastChannelControlMaxRows to be exceeded for this running application element or service instance. - a value of applPastChannelIndex has been re-used. Note that under normal circumstances, this is unlikely. Removal/replacement of an entry under the last two conditions causes the corresponding applPastChannelControlRemItems to be incremented. SEQUENCE OF ApplPastChannelEntry .1.3.6.1.2.1.62.1.3.2 |
applPastChannelEntryAn applPastChannelEntry indicates that a running application element or service instance once had an open channel, which is now closed. The entry has information describing that channel. ApplPastChannelEntry .1.3.6.1.2.1.62.1.3.2.1 |
applPastChannelIndexThis attribute serves to uniquely identify this closed channel in the context of the running application element or service instance. This attribute has no other semantics. Note that the value of applPastChannelIndex is independent of the value applOpenChannelIndex had when this channel was active. In issuing this index value, the implementation must avoid re-issuing an index value which has already been assigned to an entry which has not yet been deleted due to age or space considerations. The value zero is excluded from the set of permitted values for this index in order to permit other tables to possibly represent information that cannot be associated with a specific entry in this table. Unsigned32 (1..'ffffffff'h) .1.3.6.1.2.1.62.1.3.2.1.1 |
applPastChannelOpenTimeThis attribute records the time when this channel was originally opened. Note that this information is quite different from applOpenChannelOpenTime, which is used for the detection of counter discontinuities.ro DateAndTime (SNMPv2-TC) .1.3.6.1.2.1.62.1.3.2.1.2 |
applPastChannelCloseTimeThis attribute records the time when this channel was closed.ro DateAndTime (SNMPv2-TC) .1.3.6.1.2.1.62.1.3.2.1.3 |
applPastChannelReadRequestsThis attribute records the number of read requests for this channel made by this running application element or service instance. All read requests for this channel by this running application element or service instance, regardless of completion status, are included in this count. Read requests are counted in terms of system calls, rather than API calls.ro Unsigned64TC UNITS "read requests" .1.3.6.1.2.1.62.1.3.2.1.4 |
applPastChannelReadReqsLowThis attribute corresponds to the low thirty-two bits of applPastChannelReadRequests.ro Unsigned32 UNITS "read requests" .1.3.6.1.2.1.62.1.3.2.1.5 |
applPastChannelReadFailuresThis attribute reports the number of failed read requests.ro Unsigned32 UNITS "failed read requests" .1.3.6.1.2.1.62.1.3.2.1.6 |
applPastChannelBytesReadThis attribute reports the number of bytes read from this channel by this running application element or service instance. Only bytes successfully read are included in this count.ro Unsigned64TC UNITS "bytes" .1.3.6.1.2.1.62.1.3.2.1.7 |
applPastChannelBytesReadLowThis attribute corresponds to the low thirty-two bits of applPastChannelBytesRead.ro Unsigned32 UNITS "bytes" .1.3.6.1.2.1.62.1.3.2.1.8 |
applPastChannelLastReadTimeThis attribute reports the time of the most recent read request made by this running application element or service instance regardless of completion status, for this former channel. If no read requests have been made , the value of this attribute shall be '0000000000000000'Hro DateAndTime (SNMPv2-TC) .1.3.6.1.2.1.62.1.3.2.1.9 |
applPastChannelWriteRequestsThe applPastChannelWriteRequests attribute reports the number of write requests, regardless of completion status, made by this running application element or service instance for this former channel. Write requests are counted in terms of system calls, rather than API calls.ro Unsigned64TC UNITS "write requests" .1.3.6.1.2.1.62.1.3.2.1.10 |
applPastChannelWriteReqsLowThis attribute corresponds to the low thirty-two bits of applPastChannelWriteRequests.ro Unsigned32 UNITS "write requests" .1.3.6.1.2.1.62.1.3.2.1.11 |
applPastChannelWriteFailuresThis attribute reports the number of failed write requests.ro Unsigned32 UNITS "failed write requests" .1.3.6.1.2.1.62.1.3.2.1.12 |
applPastChannelBytesWrittenThis attribute reports the number of bytes written to this former channel by this running application element or service instance. Only bytes successfully written (no errors reported by the API in use by the application) are included in this count.ro Unsigned64TC UNITS "bytes" .1.3.6.1.2.1.62.1.3.2.1.13 |
applPastChannelBytesWritLowThis attribute corresponds to the low thirty-two bits of applPastChannelBytesWritten.ro Unsigned32 UNITS "bytes" .1.3.6.1.2.1.62.1.3.2.1.14 |
applPastChannelLastWriteTimeThe applPastChannelLastWriteTime attribute reports the time of the most recent write request made by this running application element or service instance, regardless of completion status, for this former channel. If no write requests have been made the value of this attribute shall be '0000000000000000'Hro DateAndTime (SNMPv2-TC) .1.3.6.1.2.1.62.1.3.2.1.15 |
applPastFileTableThe applPastFileTable supplements the applPastChannelTable for entries corresponding to channels which were files. The indexing structure is identical to applPastChannelTable. An entry exists in the applPastFileTable only if there is a corresponding (same index values) entry in the applPastChannelTable and if the channel was a file. Entries for closed files are removed when the corresponding entries are removed from the applPastChannelTable. SEQUENCE OF ApplPastFileEntry .1.3.6.1.2.1.62.1.3.3 |
applPastFileEntryAn applPastFileEntry provides additional, file-specific information to complement the corresponding applPastChannelEntry for a channel which was a file. ApplPastFileEntry .1.3.6.1.2.1.62.1.3.3.1 |
applPastFileNameThis attribute records the last known value of applOpenFileName before the channel was closed.ro LongUtf8String (SYSAPPL-MIB) .1.3.6.1.2.1.62.1.3.3.1.1 |
applPastFileSizeHighThis attribute records the value of applOpenFileSizeHigh at the time this channel was closed. For example, for a file with a total size of 4,294,967,296 bytes, this attribute would have a value of 1; for a file with a total size of 4,294,967,295 bytes this attribute's value would be 0.ro Unsigned32 UNITS "2^32 byte blocks" .1.3.6.1.2.1.62.1.3.3.1.2 |
applPastFileSizeLowThis attribute records the value of applOpenFileSizeLow at the time this channel was closed. For example, for a file with a total size of 4,294,967,296 bytes this attribute would have a value of 0; for a file with a total size of 4,294,967,295 bytes this attribute's value would be 4,294,967,295.ro Unsigned32 UNITS "bytes" .1.3.6.1.2.1.62.1.3.3.1.3 |
applPastFileModeThis attribute records the value of applOpenFileMode at the time this channel was closed.ro Enumeration .1.3.6.1.2.1.62.1.3.3.1.4 |
applPastConTableThe applPastConTable supplements the applPastChannelTable for entries corresponding to channels which were connections. The indexing structure is identical to applPastChannelTable. An entry exists in the applPastConTable only if there is a corresponding (same index values) entry in the applPastChannelTable and if the channel was a connection. Entries for closed connections are removed when the corresponding entries are removed from the applPastChannelTable. SEQUENCE OF ApplPastConEntry .1.3.6.1.2.1.62.1.3.4 |
applPastConEntryAn applPastConEntry provides additional, connection-specific information to complement the corresponding applPastChannelEntry for a channel which was a connection. ApplPastConEntry .1.3.6.1.2.1.62.1.3.4.1 |
applPastConTransportThe applPastConTransport attribute identifies the transport protocol that was in use for this former connection. If the transport protocol could not be determined, the value { 0 0 } shall be used.ro TDomain (SNMPv2-TC) .1.3.6.1.2.1.62.1.3.4.1.1 |
applPastConNearEndAddrThe applPastConNearEndAddr attribute reports the transport address and port information for the near end of this former connection. If the information could not be determined, the value shall be a zero-length string.ro ApplTAddress .1.3.6.1.2.1.62.1.3.4.1.2 |
applPastConNearEndpointThe applPastConNearEndpoint attribute reports the fully-qualified domain name and port information for the near end of this former connection. The format of this attribute for TCP and UDP-based protocols is the fully-qualified domain name immediately followed by a colon which is immediately followed by the decimal representation of the port number. If the information could not be determined, the value shall be a zero-length string.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.2.1.62.1.3.4.1.3 |
applPastConFarEndAddrThe applPastConFarEnd attribute reports the transport address and port information for the far end of this former connection. If not known, as in the case of a connectionless transport, the value of this attribute shall be a zero-length string.ro ApplTAddress .1.3.6.1.2.1.62.1.3.4.1.4 |
applPastConFarEndpointThe applPastConFarEndpoint attribute reports the transport address and port information for the far end of this former connection. The format of this attribute for TCP and UDP-based protocols is the fully-qualified domain name immediately followed by a colon which is immediately followed by the decimal representation of the port number. If not known, as in the case of a connectionless transport, the value of this attribute shall be a zero-length string.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.2.1.62.1.3.4.1.5 |
applPastConApplicationThe applPastConApplication attribute identifies the application layer protocol that was in use. Where possible, the values defined in [13] shall be used. If not known, the value of this attribute shall be a zero-length string.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.2.1.62.1.3.4.1.6 |
applPastTransStreamTableThe applPastTransStreamTable contains common information for historical transaction statistics. SEQUENCE OF ApplPastTransStreamEntry .1.3.6.1.2.1.62.1.3.5 |
applPastTransStreamEntryAn applPastTransStreamEntry contains information for a single former transaction stream. A transaction stream could have been a network connection, file, or other source of transactions. ApplPastTransStreamEntry .1.3.6.1.2.1.62.1.3.5.1 |
applPastTransStreamDescrThe applPastTransStreamDescr attribute provides a human-readable description of this transaction stream. If no descriptive information is available, this attribute's value shall be a zero-length string.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.2.1.62.1.3.5.1.1 |
applPastTransStreamUnitOfWorkThe applPastTransStreamUnitOfWork attribute provides a human-readable definition of what the unit of work is for this transaction stream. If no descriptive information is available, this attribute's value shall be a zero-length string.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.2.1.62.1.3.5.1.2 |
applPastTransStreamInvokesCumulative count of requests / invocations issued for this transaction stream when it was active.ro Unsigned64TC UNITS "transactions" .1.3.6.1.2.1.62.1.3.5.1.3 |
applPastTransStreamInvokesLowThis object corresponds to the low thirty-two bits of applPastTransStreamInvokes.ro Unsigned32 UNITS "transactions" .1.3.6.1.2.1.62.1.3.5.1.4 |
applPastTransStreamInvCumTimesThe applPastTransStreamInvCumTimes attribute reports the cumulative sum of the lengths of the intervals times measured between the transmission of requests and the receipt of (the first of) the corresponding response(s).ro Unsigned32 UNITS "milliseconds" .1.3.6.1.2.1.62.1.3.5.1.5 |
applPastTransStreamInvRspTimesThe applPastTransStreamInvRspTimes attribute reports the cumulative sum of the lengths of the intervals measured between the receipt of the first and last of multiple responses to a request. For transaction streams which do not permit multiple responses to a single request, this attribute will be zero.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.2.1.62.1.3.5.1.6 |
applPastTransStreamPerformsTotal number of transactions performed.ro Unsigned64TC UNITS "transactions" .1.3.6.1.2.1.62.1.3.5.1.7 |
applPastTransStreamPerformsLowThis objecy reports the low thirty-two bits of applPastTransStreamPerforms.ro Unsigned32 UNITS "transactions" .1.3.6.1.2.1.62.1.3.5.1.8 |
applPastTransStreamPrfCumTimesThe applPastTransStreamPrfCumTimes attribute reports the cumulative sum of the lengths of the intervals measured between receipt of requests and the transmission of the corresponding responses.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.2.1.62.1.3.5.1.9 |
applPastTransStreamPrfRspTimesFor each transaction performed, the elapsed time between when the first response is enqueued and when the last response is enqueued is added to this cumulative sum. For single-response protocols, the value of applPastTransStreamPrfRspTimes will be zero.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.2.1.62.1.3.5.1.10 |
applPastTransFlowTableThe applPastTransFlowTable contains entries, organized by application instance or running application element, direction of flow, and type (request/response) for each former transaction stream. The simple model of a transaction used here looks like this: invoker | Request | performer | - - - - - - > | | | | Response | | < - - - - - - | | | Since in some protocols it is possible for an entity to take on both the invoker and performer roles, information here is accumulated for transmitted and received requests, as well as for transmitted and received responses. Counts are maintained for both transactions and bytes transferred. SEQUENCE OF ApplPastTransFlowEntry .1.3.6.1.2.1.62.1.3.6 |
applPastTransFlowEntryAn applPastTransFlowEntry records transaction throughput information for requests or response in a particular direction (transmit / receive) for a transaction stream. Entries in this table correspond to those in the applPastTransStreamTable with identical values for the applElmtOrSvc, applElmtOrSvcId, and the applPastChannelIndex. ApplPastTransFlowEntry .1.3.6.1.2.1.62.1.3.6.1 |
applPastTransFlowDirectionThe applPastTransFlowDirection index serves to identify an entry as containing information pertaining to the transmit (1) or receive (2) flow of a past transaction stream. This index corresponds to applTransactFlowDirection. Enumeration .1.3.6.1.2.1.62.1.3.6.1.1 |
applPastTransFlowReqRspThe value of the applPastTransFlowReqRsp index indicates whether this entry contains information on requests (1), or responses (2). This index corresponds to applTransactFlowReqRsp. Enumeration .1.3.6.1.2.1.62.1.3.6.1.2 |
applPastTransFlowTransThe applPastTransFlowTrans attribute reports the number of request/response (as indicated by the applPastTransFlowReqRsp index) transactions received/generated (as indicated by the applPastTransFlowDirection index) handled on this transaction stream.ro Unsigned64TC UNITS "transactions" .1.3.6.1.2.1.62.1.3.6.1.3 |
applPastTransFlowTransLowThis attribute corresponds to the low thirty-two bits of applPastTransFlowTrans.ro Unsigned32 UNITS "transactions" .1.3.6.1.2.1.62.1.3.6.1.4 |
applPastTransFlowBytesThe applPastTransFlowBytes attribute reports the number of request/response (as indicated by the applPastTransFlowReqRsp index) bytes received/generated (as indicated by the applPastTransFlowDirection index) handled on this transaction stream. All application layer bytes are included in this count, including any application layer wrappers, headers, or other overhead.ro Unsigned64TC UNITS "bytes" .1.3.6.1.2.1.62.1.3.6.1.5 |
applPastTransFlowBytesLowThis attribute corresponds to the low thirty-two bits of applPastTransFlowBytes.ro Unsigned32 UNITS "bytes" .1.3.6.1.2.1.62.1.3.6.1.6 |
applPastTransFlowTimeThe applPastTransFlowTime attribute records the time of the processing (receipt or transmission as indicated by the applPastTransFlowDirection index) of the last request/response (as indicated by the applPastTransFlowReqRsp index) on this transaction stream. If no requests/responses been received/transmitted by this entity over this transaction stream, the value of this attribute shall be '0000000000000000'Hro DateAndTime (SNMPv2-TC) .1.3.6.1.2.1.62.1.3.6.1.7 |
applPastTransKindTableThe applPastTransKindTable provides transaction statistics broken down by kinds of transaction. The definition of the kinds of transactions is specific to the application protocol in use, and may be documented in the form of an applicability statement. SEQUENCE OF ApplPastTransKindEntry .1.3.6.1.2.1.62.1.3.7 |
applPastTransKindEntryAn applPastTransKindEntry reports historical data for a specific service instance or running application element's use of a specific transaction stream in a particular direction in requests or responses (as indicated by the applPastTransFlowReqRsp index) broken down by transaction kind, as indicated by the applPastTransKind index. ApplPastTransKindEntry .1.3.6.1.2.1.62.1.3.7.1 |
applPastTransKindThe applPastTransKind index is the human-readable identifier for a particular transaction kind within the context of an application protocol. The values to be used for a particular protocol may be identified in an applicability statement. This index corresponds to applTransactKind. SnmpAdminString .1.3.6.1.2.1.62.1.3.7.1.1 |
applPastTransKindTransFor this transaction stream, this attribute records the total number of transactions of the type identified by the indexes. The type is characterized according to the receive/transmit direction (applPastTransFlowDirecton), whether it was a request or a response (applPastTransFlowReqRsp), and the protocol-specific transaction kind (applPastTransKind). stream for this transaction kind.ro Unsigned64TC UNITS "transactions" .1.3.6.1.2.1.62.1.3.7.1.2 |
applPastTransKindTransLowThe applPastTransKindTransLow attribute reports the low thirty-two bits of applPastTransKindTrans.ro Unsigned32 UNITS "transactions" .1.3.6.1.2.1.62.1.3.7.1.3 |
applPastTransKindBytesFor this transaction stream and transaction kind, the applPastTransKindBytes attribute reports the number of bytes received or generated (as indicated by the applPastTransFlowDirection index) in requests or responses (as indicated by the applPastTransFlowReqRsp index). All application layer bytes are included in this count, including any application layer wrappers, headers, or other overhead.ro Unsigned64TC UNITS "bytes" .1.3.6.1.2.1.62.1.3.7.1.4 |
applPastTransKindBytesLowThe applPastTransKindBytesLow attribute corresponds to the low thirty-two bits of applPastTransKindBytes.ro Unsigned32 UNITS "bytes" .1.3.6.1.2.1.62.1.3.7.1.5 |
applPastTransKindTimeThe applPastTransKindTime attribute records the time of the processing (receipt or transmission as indicated by the applPastTransFlowDirection index) of the last request/response (as indicated by the applPastTransFlowReqRsp index) of this kind of transaction on this transaction stream. If no requests/responses of this kind were received/transmitted over this transaction stream, the value of this attribute shall be '0000000000000000'Hro DateAndTime (SNMPv2-TC) .1.3.6.1.2.1.62.1.3.7.1.6 |
applElmtRunControlGroup OBJECT IDENTIFIER .1.3.6.1.2.1.62.1.4 |
applElmtRunStatusTableThis table provides information on running application elements, complementing information available in the correspondingly indexed sysApplElmtRunTable [31]. SEQUENCE OF ApplElmtRunStatusEntry .1.3.6.1.2.1.62.1.4.1 |
applElmtRunStatusEntryAn applElmtRunStatusEntry contains information to support the control and monitoring of a single running application element. ApplElmtRunStatusEntry .1.3.6.1.2.1.62.1.4.1.1 |
applElmtRunStatusSuspendedThe applElmtRunStatusSuspended attribute reports whether processing by this running application element has been suspended, whether by management request or by other means.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.62.1.4.1.1.1 |
applElmtRunStatusHeapUsageThe applElmtRunStatusHeapUsage reports the current approximate heap usage by this running application element.ro Unsigned32 UNITS "bytes" .1.3.6.1.2.1.62.1.4.1.1.2 |
applElmtRunStatusOpenConnectionsThe applElmtRunStatusOpenConnections attribute reports the current number of open connections in use by this running application element.ro Unsigned32 UNITS "connections" .1.3.6.1.2.1.62.1.4.1.1.3 |
applElmtRunStatusOpenFilesThe applElmtRunStatusOpenFiles attribute reports the current number of open files in use by this running application element.ro Gauge32 UNITS "files" .1.3.6.1.2.1.62.1.4.1.1.4 |
applElmtRunStatusLastErrorMsgThe applElmtRunStatusLastErrorMessage attribute reports the most recent error message (typically written to stderr or a system error logging facility) from this running application element. If no such message has yet been generated, the value of this attribute shall be a zero-length string.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.2.1.62.1.4.1.1.5 |
applElmtRunStatusLastErrorTimeThe applElmtRunStatusLastErrorTime attribute reports the time of the most recent error message in applElmtRunStatusLastErrorMsg. If no such message has yet been generated, the value of this attribute shall be '0000000000000000'Hro DateAndTime (SNMPv2-TC) .1.3.6.1.2.1.62.1.4.1.1.6 |
applElmtRunControlTableThis table provides the ability to control application elements, complementing information available in the correspondingly indexed sysApplElmtRunTable [31]. SEQUENCE OF ApplElmtRunControlEntry .1.3.6.1.2.1.62.1.4.2 |
applElmtRunControlEntryAn applElmtRunControlEntry contains information to support the control of a single running application element. ApplElmtRunControlEntry .1.3.6.1.2.1.62.1.4.2.1 |
applElmtRunControlSuspendSetting this variable to 'true' requests the suspension of processing by this running application element. Setting this variable to 'false' requests that processing be resumed. The effect, if any, will be reported by the applElmtRunStatusSuspended attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.2.1.62.1.4.2.1.1 |
applElmtRunControlReconfigureChanging the value of this variable requests that the running application element re-load its configuration (like SIGHUP for many UNIX-based daemons). Note that completion of a SET on this object only implies that configuration reload was initiated, not necessarily that the reload has been completed.rw TestAndIncr (SNMPv2-TC) .1.3.6.1.2.1.62.1.4.2.1.2 |
applElmtRunControlTerminateSetting the value of applElmtRunControlTerminate to 'true' requests that the running application element terminate processing and exit in an orderly manner. This is a 'polite' shutdown request. When read, this object's value will be 'false' except when orderly termination is in progress. Note that completion of a SET on this object only implies that termination was initiated, not necessarily that the termination has been completed.rw TruthValue (SNMPv2-TC) .1.3.6.1.2.1.62.1.4.2.1.3 |
applicationMibConformance OBJECT IDENTIFIER .1.3.6.1.2.1.62.2 |
applicationMibGroups OBJECT IDENTIFIER .1.3.6.1.2.1.62.2.1 |
applicationMonitorGroupThis group represents the basic capabilities of this MIB. Unknown .1.3.6.1.2.1.62.2.1.1 |
applicationFastMonitorGroupThis group comprises 64-bit counters mandatory in high-throughput environments, where 32-bit counters could wrap in less than an hour. Unknown .1.3.6.1.2.1.62.2.1.2 |
applicationTransactGroupThis group comprises objects appropriate from monitoring transaction-structured flows. Unknown .1.3.6.1.2.1.62.2.1.3 |
applicationFastTransactGroupThis group comprises 64-bit transaction counters required in high-throughput environments, where 32-bit counters could wrap in less than an hour. Unknown .1.3.6.1.2.1.62.2.1.4 |
applicationHistoryGroupThis group models basic historical data. Unknown .1.3.6.1.2.1.62.2.1.5 |
applicationFastHistoryGroupThis group comprises additional 64-bit objects required for recording historical data in high-volume environments, where a 32-bit integer would be insufficient. Unknown .1.3.6.1.2.1.62.2.1.6 |
applicationTransHistoryGroupThis group represents historical data for transaction- structured information streams. Unknown .1.3.6.1.2.1.62.2.1.7 |
applicationFastTransHistoryGroupThis group contains 64-bit objects required for historical records on high-volume transaction-structured streams, where 32-bit integers would be insufficient. Unknown .1.3.6.1.2.1.62.2.1.8 |
applicationRunGroupThis group represents extensions to the system application MIB. Unknown .1.3.6.1.2.1.62.2.1.9 |
applicationMibComplianceThe compliance statement for the application MIB. Unknown .1.3.6.1.2.1.62.2.2 |