ALVARION-TOOLS-MIB
AI MIB Summary
The ALVARION-TOOLS-MIB module provides management interfaces for Alvarion wireless broadband access systems, specifically exposing operational tools and diagnostic parameters for base stations and subscriber units. It facilitates the monitoring of device status, configuration states, and performance counters essential for maintaining Alvarion BreezeAccess and BreezeMAX network infrastructure.
Alvarion Tools MIB module.
Main OID:
alvarionToolsMIB.1.3.6.1.4.1.12394.1.10.5.12
21
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
alvarionToolsMIBAlvarion Tools MIB module. MODULE-IDENTITY .1.3.6.1.4.1.12394.1.10.5.12 |
alvarionToolsMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.10.5.12.1 |
traceToolConfig OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.10.5.12.1.1 |
traceInterfaceSpecifies the interface to apply the trace to.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.12394.1.10.5.12.1.1.1 |
traceCaptureDestinationSpecifies if the traces shall be stored locally on the device or remotely on a distant system. 'local': Stores the traces locally on the device. 'remote': Stores the traces in a remote file specified by traceCaptureDestinationURL.rw Enumeration .1.3.6.1.4.1.12394.1.10.5.12.1.1.2 |
traceCaptureDestinationURLSpecifies the URL of the file that trace data will be sent to. If a valid URL is not defined, the trace data cannot be sent and will be discarded.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.10.5.12.1.1.3 |
traceTimeoutSpecifies the amount of time the trace will capture data. Once this limit is reached, the trace automatically stops.rw Unsigned32 .1.3.6.1.4.1.12394.1.10.5.12.1.1.4 |
traceNumberOfPacketsSpecifies the maximum number of packets (IP datagrams) the trace should capture. Once this limit is reached, the trace automatically stops.rw Unsigned32 .1.3.6.1.4.1.12394.1.10.5.12.1.1.5 |
tracePacketSizeSpecifies the maximum number of bytes to capture for each packet. The remaining data is discarded.rw Unsigned32 .1.3.6.1.4.1.12394.1.10.5.12.1.1.6 |
traceCaptureFilterSpecifies the packet filter to use to capture data. The filter expression has the same format and behavior as the expression parameter used by the well-known TCPDUMP command.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.10.5.12.1.1.7 |
traceCaptureStatusIP Trace tool action trigger. 'stop': Stops the trace tool from functioning. If any capture was previously started it will end up. if no capture was started, 'stop' has no effect. 'start': Starts to capture the packets following the critera specified in the management tool and in this MIB.rw Enumeration .1.3.6.1.4.1.12394.1.10.5.12.1.1.8 |
traceNotificationEnabledSpecifies if IP trace notifications are generated.rw AlvarionNotificationEnable (ALVARION-TC) .1.3.6.1.4.1.12394.1.10.5.12.1.1.9 |
alvarionToolsMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.10.5.12.2 |
alvarionToolsMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.10.5.12.2.0 |
traceStatusNotificationSent when the user triggers the IP Trace tool either by starting a new trace or stopping an existing session. NOTIFICATION-TYPE .1.3.6.1.4.1.12394.1.10.5.12.2.0.1 |
alvarionToolsMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.10.5.12.3 |
alvarionToolsMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.10.5.12.3.1 |
alvarionToolsMIBComplianceThe compliance statement for entities which implement the Alvarion Tools MIB. Unknown .1.3.6.1.4.1.12394.1.10.5.12.3.1.1 |
alvarionToolsMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.10.5.12.3.2 |
alvarionToolsMIBGroupA collection of objects providing the Tools MIB capability. Unknown .1.3.6.1.4.1.12394.1.10.5.12.3.2.1 |
alvarionToolsNotificationGroupA collection of supported notifications. Unknown .1.3.6.1.4.1.12394.1.10.5.12.3.2.2 |