ALVARION-DOT11-WLAN-MIB
AI MIB Summary
The ALVARION-DOT11-WLAN-MIB module provides SNMP-based monitoring and management for Alvarion BreezeAccess VL, BreezeACCESS 4900, BreezeNET-B, and BreezeACCESS-Security wireless access points and controllers. It exposes standard IEEE 802.11 WLAN metrics, including interface statistics, association states, signal quality indicators, and security session data, to facilitate real-time network performance analysis and fault isolation.
BreezeAccess VL, BreezeACCESS 4900, BreezeNET-B and BreezeACCESS-Security
Main OID:
breezeAccessVLMib.1.3.6.1.4.1.12394.1.1
866
Objects
Active
Status
1
Dependencies
Imported Objects
Objects
866 total| Object Name |
|---|
alvarion OBJECT IDENTIFIER .1.3.6.1.4.1.12394 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1 |
breezeAccessVLMibBreezeAccess VL, BreezeACCESS 4900, BreezeNET-B and BreezeACCESS-Security MODULE-IDENTITY .1.3.6.1.4.1.12394.1.1 |
brzaccVLSysInfo OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.1 |
brzaccVLUnitHwVersionApplicable to all units. Hardware platform version.ro DisplayString .1.3.6.1.4.1.12394.1.1.1.1 |
brzaccVLRunningSoftwareVersionApplicable to all units. Running software version.ro DisplayString .1.3.6.1.4.1.12394.1.1.1.2 |
brzaccVLRunningFromApplicable to all units. The memory (main or shadow) from which the current version is running from.ro Enumeration .1.3.6.1.4.1.12394.1.1.1.3 |
brzaccVLMainVersionNumberApplicable to all units. Main software version number.ro DisplayString .1.3.6.1.4.1.12394.1.1.1.4 |
brzaccVLMainVersionFileNameApplicable to all units. Main software version file name.ro DisplayString .1.3.6.1.4.1.12394.1.1.1.5 |
brzaccVLShadowVersionNumberApplicable to all units. Shadow software version number.ro DisplayString .1.3.6.1.4.1.12394.1.1.1.6 |
brzaccVLShadowVersionFileNameApplicable to all units. Shadow software version file name.ro DisplayString .1.3.6.1.4.1.12394.1.1.1.7 |
brzaccVLUnitMacAddressApplicable to all units. Unit hardware MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.1.8 |
brzaccVLUnitTypeApplicable to all units. auBS (1) : AU-BS (modular access unit). auSA (2) : AU-SA (stand-alone access unit). su-6-1D (3) : SU-6-1D (subscriber unit supporting 6 Mbps) Starting with 5.0 this is deprecated. When a SU-6-1D is upgraded to 5.0, its type will be changed to SU-6-BD. su-6-BD (4) : SU-6-BD (subscriber unit supporting 6 Mbps). su-24-BD (5) : SU-24-BD (subscriber unit supporting 24 Mbps). bu-B14 (6) : BU-B14 (BreezeNET Base Unit supporting 14 Mbps). bu-B28 (7) : BU-B28 (BreezeNET Base Unit supporting 28 Mbps). rb-B14 (8) : RB-B14 (BreezeNET Remote Bridge supporting 14 Mbps). rb-B28 (9) : RB-B28 (BreezeNET Remote Bridge supporting 28 Mbps). su-BD (10) : SU-BD (subscriber unit). su-54-BD(11) : SU-54-BD (subscriber unit supporting 54 Mbps). su-3-1D (12) : SU-3-1D (subscriber unit supporting 3 Mbps). Starting with 5.0 this is deprecated. When a SU-3-1D is upgraded to 5.0, its type will be changed to SU-3-BD. su-3-4D (13) : SU-3-4D (subscriber unit supporting 3 Mbps). Starting with 5.0 SW version this unit will work in BD mode ausBS (14) : AUS-BS (modular access unit supporting maxim 25 (via licensing) subscribers and allowing association only with SU-3 or SU-6). ausSA (15) : AUS-SA (stand-alone access unit supporting maxim 25 (via licensing) subscribers and allowing association only with SU-3 or SU-6 ). auBS4900(16) : AU-BS-4900 (BreezeAccess 4900 modular access unit) auSA4900(17) : AU-SA-4900 (BreezeAccess 4900 stand alone access unit) suBD4900(18) : SU-BD-4900 (BreezeAccess 4900 subscriber unit) bu-B100 (19) : BU-B100 (BreezeNET Base Unit unlimited throughput) rb-B100 (20) : BU-B100 (BreezeNET Remote Bridge unlimited throughput) su-I (21) : SU-I au-EZ (22) : AU-EZ su-EZ (23) : SU-EZ su-V (24) : SU-V (subscriber unit supporting 12 Mbps downlink and 8 Mbps uplink ). bu-B10(25) : BU-B10 (BreezeNET Base Unit supporting 5 Mbps). rb-B10 (26) : RB-B10 (BreezeNET Base Unit supporting 5 Mbps). su-8-BD (27) : SU-8-BD (subscriber unit supporting 8 Mbps). su-1-BD (28) : SU-1-BD (subscriber unit supporting 1 Mbps). su-3-L (29) : SU-3-L (subscriber unit supporting 3 Mbps). su-6-L (30) : SU-6-L (subscriber unit supporting 6 Mbps). su-12-L (31) : SU-12-L (subscriber unit supporting 12 Mbps). au (32) : AU (security access unit). su (33) : SU (security subscriber unit).ro Enumeration .1.3.6.1.4.1.12394.1.1.1.9 |
brzaccVLAssociatedAUApplicable to SU/RB only. Associated AU/BU MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.1.10 |
brzaccVLNumOfAssociationsSinceLastResetApplicable to all units. The number of associations since last reset, including duplicate associations (re-associations).ro INTEGER .1.3.6.1.4.1.12394.1.1.1.11 |
brzaccVLCurrentNumOfAssociationsApplicable to AU only. Not applicable to BreezeNET-B products. The number of SUs currently associated with the AU. BreezeNET-B products return 65535.ro INTEGER .1.3.6.1.4.1.12394.1.1.1.13 |
brzaccVLUnitBootVersionApplicable to all units. Boot version.ro DisplayString .1.3.6.1.4.1.12394.1.1.1.14 |
brzaccVLRadioBandApplicable to all units. The unit's radio band.ro Enumeration .1.3.6.1.4.1.12394.1.1.1.15 |
brzaccVLCurrentEthernetPortStateApplicable to all units. The current Ethernet port state.ro Enumeration .1.3.6.1.4.1.12394.1.1.1.16 |
brzaccVLTimeSinceLastResetApplicable to all units. The elapsed time since last reset.ro DisplayString .1.3.6.1.4.1.12394.1.1.1.17 |
brzaccVLCountryDependentParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.1.18 |
brzaccVLCountryCodeApplicable to all units. The country code and country name or country group name that is supported by the unit.ro DisplayString .1.3.6.1.4.1.12394.1.1.1.18.1 |
brzaccVLCountryDependentParamsTableApplicable to all units. A table of country dependent parameters. SEQUENCE OF BrzaccVLCountryDependentParameterEntry .1.3.6.1.4.1.12394.1.1.1.18.2 |
brzaccVLCountryDependentParameterEntryApplicable to all units. An entry in the Country Dependent Parameters table. BrzaccVLCountryDependentParameterEntry .1.3.6.1.4.1.12394.1.1.1.18.2.1 |
brzaccVLCountryDependentParameterTableIdxApplicable to all units. The sub-band ID of the entry in the Country Dependent Parameters table. Serves also as index for the table entry.ro INTEGER .1.3.6.1.4.1.12394.1.1.1.18.2.1.1 |
brzaccVLCountryDependentParameterFrequenciesApplicable to all units. The frequencies included in the applicable sub-band entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.1.18.2.1.2 |
brzaccVLAllowedBandwidthApplicable to all units. The bandwidth when using the applicable the sub-band.ro INTEGER .1.3.6.1.4.1.12394.1.1.1.18.2.1.3 |
brzaccVLRegulationMaxTxPowerAtAntennaPortApplicable to all units. The maximum allowed Tx power when using the applicable sub-band. A RegulationMaxTxPowerAtAntennaPort of 255, means no limitro INTEGER .1.3.6.1.4.1.12394.1.1.1.18.2.1.4 |
brzaccVLRegulationMaxEIRPApplicable to all units. The maximum Tx EIRP when using the applicable sub-band. A Regulation Max EIRP of 0, means no limit.ro INTEGER .1.3.6.1.4.1.12394.1.1.1.18.2.1.5 |
brzaccVLMinModulationLevelApplicable to all units. The minimum supported modulation level.ro Enumeration .1.3.6.1.4.1.12394.1.1.1.18.2.1.6 |
brzaccVLMaxModulationLevelApplicable to all units. The maximum supported modulation level.ro Enumeration .1.3.6.1.4.1.12394.1.1.1.18.2.1.7 |
brzaccVLBurstModeSupportApplicable to all units. The supported Burst Mode Option.ro Enumeration .1.3.6.1.4.1.12394.1.1.1.18.2.1.8 |
brzaccVLMaximumBurstDurationApplicable to all units. Applicable only if Burst Mode Option is supported. The maximum supported burst duration.ro INTEGER .1.3.6.1.4.1.12394.1.1.1.18.2.1.9 |
brzaccVLDfsSupportApplicable to AU/BU only. The supported Dfs Option.ro Enumeration .1.3.6.1.4.1.12394.1.1.1.18.2.1.10 |
brzaccVLMinimumHwRevisionApplicable to all units. The Minimum HW Revision needed to support the country code.ro Enumeration .1.3.6.1.4.1.12394.1.1.1.18.2.1.11 |
brzaccVLAuthenticationEncryptionSupportApplicable to all units. The supported Authentication Encryption Option.ro Enumeration .1.3.6.1.4.1.12394.1.1.1.18.3 |
brzaccVLDataEncryptionSupportApplicable to all units. The supported Data Encryption Option.ro Enumeration .1.3.6.1.4.1.12394.1.1.1.18.4 |
brzaccVLAESEncryptionSupportApplicable to all units. The supported AES Encryption Option.ro Enumeration .1.3.6.1.4.1.12394.1.1.1.18.5 |
brzaccVLAntennaGainChangeApplicable to all units. Indicates whether the Antenna Gain parameter is changeable or fixed.ro Enumeration .1.3.6.1.4.1.12394.1.1.1.19 |
brzaccVLAteTestResultsApplicable to all units. Results of ATE Testro Enumeration .1.3.6.1.4.1.12394.1.1.1.20 |
brzaccVLSerialNumberApplicable to all units. Serial Number of the unitro DisplayString .1.3.6.1.4.1.12394.1.1.1.21 |
brzaccVLAUSSupportSU54Applicable to AU only. If the AU is not AUS, it will return 255. If the AUS is in 900 MHz bandwidth, it will return 255 Indicates if the AUS has license for association of SU-54.ro Enumeration .1.3.6.1.4.1.12394.1.1.1.22 |
brzaccVLNumOfRejectionsSinceLastResetApplicable to AU/BU only. The number of subscribers that were rejected because of wrong ESSIDro INTEGER .1.3.6.1.4.1.12394.1.1.1.23 |
brzaccVLAUSSupportSU8Applicable to AU only. If the AU is not AUS, it will return 255. If the unit is AUS but not operating in 900 MHz, it will return 255. Indicates if the AUS has license for association of SU-8.ro Enumeration .1.3.6.1.4.1.12394.1.1.1.24 |
brzaccVLUnitControl OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.2 |
brzaccVLResetUnitApplicable to all units. Resets the unit and applies new parameter values.rw Enumeration .1.3.6.1.4.1.12394.1.1.2.1 |
brzaccVLSetDefaultsApplicable to all units. Sets unit configuration to Defaults values after the next reset. noDefaultSettingRequested : Read-Only Option, no Default setting was Issued. completeFactory : All parameters revert to Factory Defaults values. partialFactory : All parameters revert to Factory Defaults values, except the parameters required for maintaining wireless connectivity. completeOperator: All parameters revert to Operator Defaults values. partialOperator : All parameters revert to Operator Defaults values, except the parameters required for maintaining wireless connectivity. cancelCurrentPendingRequest : Default Setting request is cancelled.rw Enumeration .1.3.6.1.4.1.12394.1.1.2.2 |
brzaccVLUnitNameApplicable to all units. The unit name. A string of up to 32 printable ASCII characters.rw DisplayString .1.3.6.1.4.1.12394.1.1.2.3 |
brzaccVLFlashMemoryControlApplicable to all units. resetAndBootFromShadowVersion : Activates the backup version. useRunningVersionAfterReset : The currently active version will become the main version and will be activated after next reset.rw Enumeration .1.3.6.1.4.1.12394.1.1.2.4 |
brzaccVLTelnetLogoutTimerApplicable to all units. Time-out of management via Telnet program. Automatic exit if the program is inactive for the defined time. Range: 1 to 999 (minutes).rw INTEGER .1.3.6.1.4.1.12394.1.1.2.5 |
brzaccVLSaveCurrentConfigurationAsOperatorDefaultsApplicable to all units. Saves the current configuration as Operator Defaults. Cannot be executed after requesting set defaults and the unit was not reset.rw Enumeration .1.3.6.1.4.1.12394.1.1.2.6 |
brzaccVLExitTelnetApplicable to all units. Exit the management via Telnet program.rw Enumeration .1.3.6.1.4.1.12394.1.1.2.7 |
brzaccVLUnitPasswords OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.2.8 |
brzaccVLReadOnlyPasswordApplicable to all units. The User (read only) password. This is also the Read Community String. Up to 8 printable ASCII characters.rw DisplayString .1.3.6.1.4.1.12394.1.1.2.8.1 |
brzaccVLInstallerPasswordApplicable to all units. The Installer password. Up to 8 printable ASCII characters. Value read will allwais be *********rw DisplayString .1.3.6.1.4.1.12394.1.1.2.8.2 |
brzaccVLAdminPasswordApplicable to all units. The Administrator password. Value read will allwais be *********. Up to 8 printable ASCII characters.rw DisplayString .1.3.6.1.4.1.12394.1.1.2.8.3 |
brzaccVLEthernetNegotiationModeApplicable to all units. The speed/duplex mode of the Ethernet port.rw Enumeration .1.3.6.1.4.1.12394.1.1.2.9 |
brzaccVLFTPParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.2.10 |
brzaccVLFTPServerParams OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.2.10.1 |
brzaccVLFTPServerUserNameApplicable to all units. The user name to be used for access to the FTP server. Accessible only with SNMP Write Community String (administrator password).rw DisplayString .1.3.6.1.4.1.12394.1.1.2.10.1.1 |
brzaccVLFTPServerPasswordApplicable to all units. The password to be used for access to the FTP server. Accessible only with SNMP Write Community String (administrator password).rw DisplayString .1.3.6.1.4.1.12394.1.1.2.10.1.2 |
brzaccVLFTPClientIPAddressApplicable to all units. For SW version higher than 4.0 this is read-only. The IP address of the FTP stack in the unit.rw IpAddress .1.3.6.1.4.1.12394.1.1.2.10.1.3 |
brzaccVLFTPServerIpAddressApplicable to all units. The IP address of the FTP server.rw IpAddress .1.3.6.1.4.1.12394.1.1.2.10.1.4 |
brzaccVLFTPClientMaskApplicable to all units. Starting with 5.0 this parameter is not appplicable. The Mask of the FTP stack in the unit.rw IpAddress .1.3.6.1.4.1.12394.1.1.2.10.1.5 |
brzaccVLFTPGatewayIpAddressApplicable to all units. Starting with 5.0 this parameter is not appplicable. The FTP Gateway addressrw IpAddress .1.3.6.1.4.1.12394.1.1.2.10.1.6 |
brzaccVLFTPSwDownload OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.2.10.2 |
brzaccVLFTPSwFileNameApplicable to all units. The name of the SW file to be downloaded.rw DisplayString .1.3.6.1.4.1.12394.1.1.2.10.2.1 |
brzaccVLFTPSwSourceDirApplicable to all units. The source directory of the required file in the FTP server. Up to 80 printable ASCII characters. Use dot (.) To clear fieldrw DisplayString .1.3.6.1.4.1.12394.1.1.2.10.2.2 |
brzaccVLFTPDownloadSwFileApplicable to all units. Execution of the SW download operationrw Enumeration .1.3.6.1.4.1.12394.1.1.2.10.2.3 |
brzaccVLConfigurationFileLoading OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.2.10.3 |
brzaccVLConfigurationFileNameApplicable to all units. The name of the configuration file to be downloaded/uploaded.rw DisplayString .1.3.6.1.4.1.12394.1.1.2.10.3.1 |
brzaccVLOperatorDefaultsFileNameApplicable to all units. The name of the Operator Defaults file to be downloaded/uploadedrw DisplayString .1.3.6.1.4.1.12394.1.1.2.10.3.2 |
brzaccVLFTPConfigurationFileSourceDirApplicable to all units. The source directory of the required file in the FTP server. Up to 80 printable ASCII characters. Use dot (.) To clear fieldrw DisplayString .1.3.6.1.4.1.12394.1.1.2.10.3.3 |
brzaccVLExecuteFTPConfigurationFileLoadingApplicable to all units. Execution of the file download/upload operation.rw Enumeration .1.3.6.1.4.1.12394.1.1.2.10.3.4 |
brzaccVLEventLogFileUploading OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.2.10.4 |
brzaccVLEventLogFileNameApplicable to all units. The name of the Event Log file to be uploaded.rw DisplayString .1.3.6.1.4.1.12394.1.1.2.10.4.1 |
brzaccVLEventLogDestinationDirApplicable to all units. The destination directory of the event log file. Up to 80 printable ASCII characters. Use dot (.) To clear field.rw DisplayString .1.3.6.1.4.1.12394.1.1.2.10.4.2 |
brzaccVLUploadEventLogFileApplicable to all units. Execution of the event log upload operation.rw Enumeration .1.3.6.1.4.1.12394.1.1.2.10.4.3 |
brzaccVLLoadingStatusApplicable to all units. The status of the last loading operation.ro Enumeration .1.3.6.1.4.1.12394.1.1.2.11 |
brzaccVLEventLogFileParams OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.2.12 |
brzaccVLEventLogPolicyApplicable to all units. The lowest level event to be registered in the event log.rw Enumeration .1.3.6.1.4.1.12394.1.1.2.12.1 |
brzaccVLEraseEventLogApplicable to all units. Erase the event log.rw Enumeration .1.3.6.1.4.1.12394.1.1.2.12.2 |
brzaccVLSystemLocationApplicable to all units. The unit location.rw DisplayString .1.3.6.1.4.1.12394.1.1.2.13 |
brzaccVLFeatureUpgrade OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.2.14 |
brzaccVLFeatureUpgradeManuallyApplicable to all units. Upgrade unit to support new feature. Enter your license number (32 to 64 hex digits).rw DisplayString .1.3.6.1.4.1.12394.1.1.2.14.1 |
brzaccVLChangeUnitTypeApplicable RB/BU only. Change the unit type between BU and RB.rw Enumeration .1.3.6.1.4.1.12394.1.1.2.15 |
brzaccVLApWorkingModeApplicable to AU-EZ only. Starting with 5.5 it is read-only. Report unit running mode: 1 - EZ mode.ro Enumeration .1.3.6.1.4.1.12394.1.1.2.16 |
brzaccVLLEDsettings OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.2.17 |
brzaccVLLEDmodeApplicable to all units with SW version 6.0 and higher, except AU. Sets the operating mode of the unit LEDSrw Enumeration .1.3.6.1.4.1.12394.1.1.2.17.1 |
brzaccVLThresholdTableApplicable to all units with SW version 6.0 and higher, except AU. A table with the settings for Threshold mode SEQUENCE OF BrzaccVLThresholdTableSettings .1.3.6.1.4.1.12394.1.1.2.17.2 |
brzaccVLThresholdTableEntryApplicable to all units with SW version 6.0 and higher, except AU. An entry in the ThresholdTable. BrzaccVLThresholdTableSettings .1.3.6.1.4.1.12394.1.1.2.17.2.1 |
brzaccVLThresholdLEDnumApplicable to all units with SW version 6.0 and higher, except AU. The LED position and index.ro INTEGER ( 1..8 ) .1.3.6.1.4.1.12394.1.1.2.17.2.1.1 |
brzaccVLThresholdLEDtypeApplicable to all units with SW version 6.0 and higher, except AU. The type of measurement of the LEDrw Enumeration .1.3.6.1.4.1.12394.1.1.2.17.2.1.2 |
brzaccVLThresholdLEDmodeApplicable to all units with SW version 6.0 and higher, except AU. The condition to turn the LED on.rw Enumeration .1.3.6.1.4.1.12394.1.1.2.17.2.1.3 |
brzaccVLThresholdLEDtargetApplicable to all units with SW version 6.0 and higher, except AU. The target value, depending on LED type, from brzaccVLThresholdLEDtype above.rw INTEGER ( -108..100 ) .1.3.6.1.4.1.12394.1.1.2.17.2.1.4 |
brzaccVLNwMngParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.3 |
brzaccVLAccessToNwMngApplicable to all units. The port to be used for remote management.rw Enumeration .1.3.6.1.4.1.12394.1.1.3.1 |
brzaccVLNwMngFilterApplicable to all units. Disables or enable on one of the ports, or on both ports, IP address based filtering of management messages (e.g. SNMP , Telnet , TFTP , DHCP).rw Enumeration .1.3.6.1.4.1.12394.1.1.3.2 |
mngIpFilterTableStarting with version 5.0, this is deprecated. Use newMngIpFilterTable instead. Applicable to all units. A Management IP Filter Table of up to 3 IP addresses of devices that are authorized to access the unit for management purposes. SEQUENCE OF MngIpFilterEntry .1.3.6.1.4.1.12394.1.1.3.3 |
mngIpFilterEntryApplicable to all units. A Management IP Filter Table entry. MngIpFilterEntry .1.3.6.1.4.1.12394.1.1.3.3.1 |
brzaccVLNwMngIpAddressApplicable to all units. An IP address in the Management IP Filter Table.rw IpAddress .1.3.6.1.4.1.12394.1.1.3.3.1.1 |
brzaccVLNwMngIpTableIdxApplicable to all units. A table index for an entry in the Management IP Filter Table.ro INTEGER .1.3.6.1.4.1.12394.1.1.3.3.1.2 |
brzaccVLDeleteOneNwIpAddrApplicable to all units. 0 - cancel operation. 1..10 - Deletes a single selected entry from the Management IP Filter Table.rw INTEGER (0 | 1..10 | 255) .1.3.6.1.4.1.12394.1.1.3.4 |
brzaccVLDeleteAllNwIpAddrsApplicable to all units. Deletes all entries from the Management IP Filter Table.rw Enumeration .1.3.6.1.4.1.12394.1.1.3.5 |
brzaccVLAccessToNwTrapApplicable to all units. Enables or disables sending of traps.rw Enumeration .1.3.6.1.4.1.12394.1.1.3.6 |
mngTrapTableStarting with version 5.0, this is deprecated. Use newMngTrapTable instead. Applicable to all units. A Management Trap Table of up to 10 IP addresses of stations to send traps to. SEQUENCE OF MngTrapEntry .1.3.6.1.4.1.12394.1.1.3.7 |
mngTrapEntryApplicable to all units. A Management Trap Table entry. MngTrapEntry .1.3.6.1.4.1.12394.1.1.3.7.1 |
brzaccVLNwMngTrapCommunityApplicable to all units. The trap community associated with the applicable entry in the Management Trap Table. Up to 14 printable case sensitive ASCII characters.rw DisplayString .1.3.6.1.4.1.12394.1.1.3.7.1.1 |
brzaccVLNwMngTrapAddressApplicable to all units. An IP address in the Management Trap Table entry.rw IpAddress .1.3.6.1.4.1.12394.1.1.3.7.1.2 |
brzaccVLNwTrapTableIdxApplicable to all units. Tables Index for an entry in the Management Trap Table.ro INTEGER .1.3.6.1.4.1.12394.1.1.3.7.1.3 |
brzaccVLDeleteOneTrapAddrApplicable to all units. 0 - cancel operation. 1..10 - Deletes a single selected entry from the Management Trap Table.rw INTEGER (0 | 1..10 | 255) .1.3.6.1.4.1.12394.1.1.3.8 |
brzaccVLDeleteAllTrapAddrsApplicable to all units. Deletes all entries from the Management Trap Table.rw Enumeration .1.3.6.1.4.1.12394.1.1.3.9 |
brzaccVLMngIpRangesTableStarting with version 5.0, this is deprecated. Use brzaccVLNewMngIpRangesTable instead. Applicable to all units. Table of Management IP Address Ranges SEQUENCE OF BrzaccVLMngIpRangeEntry .1.3.6.1.4.1.12394.1.1.3.10 |
brzaccVLMngIpRangeEntryApplicable to all units. A Management IP Address Ranges Table entry BrzaccVLMngIpRangeEntry .1.3.6.1.4.1.12394.1.1.3.10.1 |
brzaccVLMngIpRangeIdxApplicable to all units. Index of an entry in the Management IP Address Ranges Tablero INTEGER .1.3.6.1.4.1.12394.1.1.3.10.1.1 |
brzaccVLMngIpRangeFlagApplicable to all units. Defines the method of defining the range: Using Start & End Address( rangeDefinedByStartEndAddr ), or using Start Address and Mask ( rangeDefinedByStartAddrSubNetMask ).rw Enumeration .1.3.6.1.4.1.12394.1.1.3.10.1.2 |
brzaccVLMngIpRangeStartApplicable to all units. Start Address of the rangerw IpAddress .1.3.6.1.4.1.12394.1.1.3.10.1.3 |
brzaccVLMngIpRangeEndApplicable to all units. End Address of the range. Used only if brzaccVLMngIpRangeFlag is rangeDefinedByStartEndAddrrw IpAddress .1.3.6.1.4.1.12394.1.1.3.10.1.4 |
brzaccVLMngIpRangeMaskApplicable to all units. End Address of the range. Used only if brzaccVLMngIpRangeFlag is rangeDefinedByStartAddrMaskrw IpAddress .1.3.6.1.4.1.12394.1.1.3.10.1.5 |
brzaccVLDeleteOneNwIpRangeApplicable to all units. 0 - cancel operation. 1..10 - Deletes a single selected entry from the Management IP Ranges Table.rw INTEGER (0 | 1..10 | 255) .1.3.6.1.4.1.12394.1.1.3.11 |
brzaccVLDeleteAllNwIpRangesApplicable to all units. Deletes all entries from the Management IP Ranges Table.rw Enumeration .1.3.6.1.4.1.12394.1.1.3.12 |
brzaccVLWi2IpAddressApplicable to SU/RB unit only. The IP Address of the WIFI WIMAX unitrw IpAddress .1.3.6.1.4.1.12394.1.1.3.13 |
brzaccVLNewNMngSystem OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.3.14 |
brzaccVLErrorHandling OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.3.14.1 |
brzaccVLErrHandlingSetNMSIdApplicable to all units. The ID of the Network Management System that use Error Handling mechanism. Get request will return 0.rw INTEGER .1.3.6.1.4.1.12394.1.1.3.14.1.1 |
brzaccVLErrHandlingTable SEQUENCE OF BrzaccVLErrHandlingEntry .1.3.6.1.4.1.12394.1.1.3.14.1.2 |
brzaccVLErrHandlingEntry BrzaccVLErrHandlingEntry .1.3.6.1.4.1.12394.1.1.3.14.1.2.1 |
brzaccVLErrHandlingNMSIdro Unsigned32 .1.3.6.1.4.1.12394.1.1.3.14.1.2.1.1 |
brzaccVLErrHandlingRequestIdro Unsigned32 .1.3.6.1.4.1.12394.1.1.3.14.1.2.1.2 |
brzaccVLErrHandlingErrorCodero INTEGER .1.3.6.1.4.1.12394.1.1.3.14.1.2.1.3 |
brzaccVLErrHandlingParameter1ro INTEGER .1.3.6.1.4.1.12394.1.1.3.14.1.2.1.4 |
brzaccVLErrHandlingParameter2ro INTEGER .1.3.6.1.4.1.12394.1.1.3.14.1.2.1.5 |
brzaccVLErrHandlingParameter3ro INTEGER .1.3.6.1.4.1.12394.1.1.3.14.1.2.1.6 |
brzaccVLErrHandlingParameter4ro INTEGER .1.3.6.1.4.1.12394.1.1.3.14.1.2.1.7 |
brzaccVLErrHandlingParameter5ro INTEGER .1.3.6.1.4.1.12394.1.1.3.14.1.2.1.8 |
brzaccVLTrapHistory OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.3.14.2 |
brzaccVLLastTrapSequenceNumberApplicable to AU/BU only. Sequence Number of Last generated Trapro INTEGER .1.3.6.1.4.1.12394.1.1.3.14.2.1 |
brzaccVLTrapHistoryTableApplicable to AU/BU only. This table contains the last 1024 traps generated by the unit. SEQUENCE OF BrzaccVLTrapHistoryEntry .1.3.6.1.4.1.12394.1.1.3.14.2.2 |
brzaccVLTrapHistoryEntryApplicable to AU/BU only. An entry in Trap History Table. BrzaccVLTrapHistoryEntry .1.3.6.1.4.1.12394.1.1.3.14.2.2.1 |
brzaccVLTrapHistorySequenceNumberApplicable to AU/BU only. Sequence number of the trap.ro INTEGER .1.3.6.1.4.1.12394.1.1.3.14.2.2.1.1 |
brzaccVLTrapTypeApplicable to AU/BU only. It contains the trap type.ro INTEGER .1.3.6.1.4.1.12394.1.1.3.14.2.2.1.2 |
brzaccVLTrapMacAddrParamApplicable to AU/BU only. It contains the MAC Address of the trap if the trap type requires this field, otherwise it contains the NULL MAC Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.3.14.2.2.1.3 |
brzaccVLTrapIntParam1Applicable to AU/BU only. It contains the first variable of integer type for the trap. If from the trap definition this variable is not applicable it will be 0.ro INTEGER .1.3.6.1.4.1.12394.1.1.3.14.2.2.1.4 |
brzaccVLTrapIntParam2Applicable to AU/BU only. It contains the second variable of integer type for the trap. If from the trap definition this variable is not applicable it will be 0.ro INTEGER .1.3.6.1.4.1.12394.1.1.3.14.2.2.1.5 |
brzaccVLTrapIntParam3Applicable to AU/BU only. It contains the third variable of integer type for the trap. If from the trap definition this variable is not applicable it will be 0.ro INTEGER .1.3.6.1.4.1.12394.1.1.3.14.2.2.1.6 |
brzaccVLTrapStrParamApplicable to AU/BU only. It contains the string variable of the trap if this variable exists for that trap, otherwise it will contain the empty string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.3.14.2.2.1.7 |
newMngIpFilterTableApplicable to all units. A Management IP Filter Table of up to 10 IP addresses of devices that are authorized to access the unit for management purposes. SEQUENCE OF NewMngIpFilterEntry .1.3.6.1.4.1.12394.1.1.3.15 |
newMngIpFilterEntryApplicable to all units. A Management IP Filter Table entry. NewMngIpFilterEntry .1.3.6.1.4.1.12394.1.1.3.15.1 |
brzaccVLNewNwMngIpAddressApplicable to all units. An IP address in the Management IP Filter Table.ro IpAddress .1.3.6.1.4.1.12394.1.1.3.15.1.1 |
brzaccVLNewNwMngIpAddressCommandApplicable to all units. Supports only active(1), createAndGo(4) and destroy(6). A command for an entry in the Management IP Filter Table.rw Enumeration .1.3.6.1.4.1.12394.1.1.3.15.1.2 |
newMngTrapTableApplicable to all units. A Management Trap Table of up to 10 IP addresses of stations to send traps to. SEQUENCE OF NewMngTrapEntry .1.3.6.1.4.1.12394.1.1.3.16 |
newMngTrapEntryApplicable to all units. A Management Trap Table entry. NewMngTrapEntry .1.3.6.1.4.1.12394.1.1.3.16.1 |
brzaccVLNewNwMngTrapCommunityApplicable to all units. The trap community associated with the applicable entry in the Management Trap Table. Up to 14 printable case sensitive ASCII characters.rw DisplayString .1.3.6.1.4.1.12394.1.1.3.16.1.1 |
brzaccVLNewNwMngTrapAddressApplicable to all units. An IP address in the Management Trap Table entry.ro IpAddress .1.3.6.1.4.1.12394.1.1.3.16.1.2 |
brzaccVLNewNwTrapCommandApplicable to all units. Supports only active(1), createAndGo(4) and destroy(6). A command for an entry in the Management Trap Table.rw Enumeration .1.3.6.1.4.1.12394.1.1.3.16.1.3 |
brzaccVLNewMngIpRangesTableApplicable to all units. Table of Management IP Address Ranges SEQUENCE OF BrzaccVLNewMngIpRangeEntry .1.3.6.1.4.1.12394.1.1.3.17 |
brzaccVLNewMngIpRangeEntryApplicable to all units. A Management IP Address Ranges Table entry BrzaccVLNewMngIpRangeEntry .1.3.6.1.4.1.12394.1.1.3.17.1 |
brzaccVLNewMngIpRangeStartApplicable to all units. Start Address of the rangero IpAddress .1.3.6.1.4.1.12394.1.1.3.17.1.1 |
brzaccVLNewMngIpRangeEndApplicable to all units. End Address of the range. Used only if brzaccVLMngIpRangeFlag is rangeDefinedByStartEndAddrrw IpAddress .1.3.6.1.4.1.12394.1.1.3.17.1.2 |
brzaccVLNewMngIpRangeMaskApplicable to all units. End Address of the range. Used only if brzaccVLMngIpRangeFlag is rangeDefinedByStartAddrMaskrw IpAddress .1.3.6.1.4.1.12394.1.1.3.17.1.3 |
brzaccVLNewMngIpRangeFlagApplicable to all units. Defines the method of defining the range: Using Start & End Address( rangeDefinedByStartEndAddr ), or using Start Address and Mask ( rangeDefinedByStartAddrSubNetMask ).rw Enumeration .1.3.6.1.4.1.12394.1.1.3.17.1.4 |
brzaccVLNewMngIpRangeCommandApplicable to all units. Row Status in the New Management IP Address Ranges Tablerw Enumeration .1.3.6.1.4.1.12394.1.1.3.17.1.5 |
brzaccVLIpParams OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.4 |
brzaccVLUnitIpAddressApplicable to all units. IP address of the unit.rw IpAddress .1.3.6.1.4.1.12394.1.1.4.1 |
brzaccVLSubNetMaskApplicable to all units. Subnet mask of the unit.rw IpAddress .1.3.6.1.4.1.12394.1.1.4.2 |
brzaccVLDefaultGWAddressApplicable to all units. Default gateway IP address of the unit.rw IpAddress .1.3.6.1.4.1.12394.1.1.4.3 |
brzaccVLUseDhcpApplicable to all units. DHCP client mode of operation. disabled : Use regular (manual) methods to configure IP parameters. dHCP Only: Use DHCP server to configure IP parameters. automatic: Use DHCP server to configure IP parameters. If a DHCP server is not available, use manually configured values.rw Enumeration .1.3.6.1.4.1.12394.1.1.4.4 |
brzaccVLAccessToDHCPApplicable to all units. The port to be used for communicating with a DHCP server.rw Enumeration .1.3.6.1.4.1.12394.1.1.4.5 |
brzaccVLRunTimeIPaddrApplicable to all units. The run-time IP address. If DHCP is used the Run Time IP Address is the address given to the unit by the server. Otherwise it is the manually configured address.ro IpAddress .1.3.6.1.4.1.12394.1.1.4.6 |
brzaccVLRunTimeSubNetMaskApplicable to all units. The run-time Subnet Mask. If DHCP is used the Run Time Subnet Mask is the mask given to the unit by the server. Otherwise it is the manually configured mask.ro IpAddress .1.3.6.1.4.1.12394.1.1.4.7 |
brzaccVLRunTimeDefaultIPGatewayApplicable to all units. The run-time Gateway IP address. If DHCP is used the Run Time Gateway IP Address is the address given to the unit by the server. Otherwise it is the manually configured address.ro IpAddress .1.3.6.1.4.1.12394.1.1.4.8 |
brzaccVLBridgeParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.5 |
brzaccVLVLANSupport OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.5.1 |
brzaccVLVlanIDApplicable to SU/RB only. VLAN ID for data frame tagging. Applicable to Access Link only. Range: 1 to 4094. 0 - not applicable.rw INTEGER .1.3.6.1.4.1.12394.1.1.5.1.1 |
brzaccVLEthernetLinkTypeApplicable to all units. VLAN support mode (Link Type). The Access Link, Extended Access Link and Extended Trunk Link options are not available for AU/BU. Service Provider Link is not available for BU/RB.rw Enumeration .1.3.6.1.4.1.12394.1.1.5.1.2 |
brzaccVLManagementVlanIDApplicable to all units. VLAN ID for management frame tagging. Range: 1 to 4094, 65535 for No VLAN tagging.rw INTEGER .1.3.6.1.4.1.12394.1.1.5.1.3 |
brzaccVLVLANForwarding OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.5.1.4 |
brzaccVLVlanForwardingSupportApplicable to all units. Enables or disables the VLAN forwarding feature. (applicable in Trunk and Service Provider links only).rw Enumeration .1.3.6.1.4.1.12394.1.1.5.1.4.1 |
brzaccVLVlanForwardingTableStarting with version 5.0, this is deprecated. Use brzaccVLNewVlanForwardingTable instead. Applicable to all units. A VLAN Forwarding Table of up to 20 VLAN IDs of devices to which data frames are forwarded when VLAN Forwarding is Enabled. (applicable in Trunk and Service Provider links only). SEQUENCE OF BrzaccVLVlanForwardingEntry .1.3.6.1.4.1.12394.1.1.5.1.4.2 |
brzaccVLVlanForwardingEntryApplicable to all units. A VLAN Forwarding Table entry. (applicable in Trunk and Service Provider links only). BrzaccVLVlanForwardingEntry .1.3.6.1.4.1.12394.1.1.5.1.4.2.1 |
brzaccVLVlanForwardingTableIdxApplicable to all units. A read only table index for a VLAN entry in the VLAN Forwarding Table.ro INTEGER .1.3.6.1.4.1.12394.1.1.5.1.4.2.1.1 |
brzaccVLVlanIdForwardingApplicable to all units. The list of VLAN ID's in the VLAN ID Forwarding Table. To Remove a VLAN ID - SET the corresponding entry to 0. To Add a new VLAN ID SET an entry which is currently 0. Range : 0 to 4094rw INTEGER .1.3.6.1.4.1.12394.1.1.5.1.4.2.1.2 |
brzaccVLNewVlanForwardingTableApplicable to all units. A VLAN Forwarding Table of up to 20 VLAN IDs of devices to which data frames are forwarded when VLAN Forwarding is Enabled. (applicable in Trunk and Service Provider links only). SEQUENCE OF BrzaccVLNewVlanForwardingEntry .1.3.6.1.4.1.12394.1.1.5.1.4.3 |
brzaccVLNewVlanForwardingEntryApplicable to all units. A VLAN Forwarding Table entry. (applicable in Trunk and Service Provider links only). BrzaccVLNewVlanForwardingEntry .1.3.6.1.4.1.12394.1.1.5.1.4.3.1 |
brzaccVLNewVlanIdForwardingApplicable to all units. The list of VLAN ID's in the VLAN ID Forwarding Table. Range : 1 to 4094ro INTEGER .1.3.6.1.4.1.12394.1.1.5.1.4.3.1.1 |
brzaccVLNewVlanForwardingCommandApplicable to all units. Row Status in the New VLAN Forwarding Table.rw Enumeration .1.3.6.1.4.1.12394.1.1.5.1.4.3.1.2 |
brzaccVLVlanRelaying OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.5.1.5 |
brzaccVLVlanRelayingSupportApplicable to AU only. Not applicable to BreezeNET-B products. Enables or disables VLAN Relaying (applicable in Trunk and Service Provider links only).rw Enumeration .1.3.6.1.4.1.12394.1.1.5.1.5.1 |
brzaccVLVlanRelayingTableStarting with version 5.0, this is deprecated. Use brzaccVLNewVlanRelayingTable instead. Applicable to AU only. Not applicable to BreezeNET-B products. A VLAN Relaying Table of up to 20 VLAN IDs of devices to which data frames are relayed when VLAN Relaying is Enabled. (applicable in Trunk and Service Provider links only). SEQUENCE OF BrzaccVLVlanRelayingEntry .1.3.6.1.4.1.12394.1.1.5.1.5.2 |
brzaccVLVlanRelayingEntryApplicable to AU only. Not applicable to BreezeNET-B products. A VLAN Relaying Table entry. (applicable in Trunk and Service Provider links only). BrzaccVLVlanRelayingEntry .1.3.6.1.4.1.12394.1.1.5.1.5.2.1 |
brzaccVLVlanRelayingTableIdxApplicable to AU only. Not applicable to BreezeNET-B products. A table index for a VLAN entry in the VLAN Relaying Table.ro INTEGER .1.3.6.1.4.1.12394.1.1.5.1.5.2.1.1 |
brzaccVLVlanIdRelayingApplicable to AU only. Not applicable to BreezeNET-B products. The list of VLAN ID's in the VLAN ID Relaying Table. To Remove a VLAN ID - SET the corresponding entry to 0. To Add a new VLAN ID SET an entry which is currently 0. Range: 0 to 4094 , 0 - remove entry.rw INTEGER .1.3.6.1.4.1.12394.1.1.5.1.5.2.1.2 |
brzaccVLNewVlanRelayingTableApplicable to AU only. Not applicable to BreezeNET-B products. A VLAN Relaying Table of up to 20 VLAN IDs of devices to which data frames are relayed when VLAN Relaying is Enabled. (applicable in Trunk and Service Provider links only). SEQUENCE OF BrzaccVLNewVlanRelayingEntry .1.3.6.1.4.1.12394.1.1.5.1.5.3 |
brzaccVLNewVlanRelayingEntryApplicable to AU only. Not applicable to BreezeNET-B products. A VLAN Relaying Table entry. (applicable in Trunk and Service Provider links only). BrzaccVLNewVlanRelayingEntry .1.3.6.1.4.1.12394.1.1.5.1.5.3.1 |
brzaccVLNewVlanIdRelayingApplicable to AU only. Not applicable to BreezeNET-B products. The list of VLAN ID's in the VLAN ID Relaying Table. Range: 1 to 4094.ro INTEGER .1.3.6.1.4.1.12394.1.1.5.1.5.3.1.1 |
brzaccVLNewVlanRelayingTableCommandApplicable to AU only. Not applicable to BreezeNET-B products. Supports only active(1), createAndGo(4) and destroy(6). A command to create or destroy a VLAN entry in the VLAN Relaying Table.rw Enumeration .1.3.6.1.4.1.12394.1.1.5.1.5.3.1.2 |
brzaccVLVLANTrafficPriority OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.5.1.6 |
brzaccVLVlanDataPriorityApplicable to SU/RB only. Priority tagging for data frames. Applicable to Access Link only. Range: 0 to 7.rw Enumeration .1.3.6.1.4.1.12394.1.1.5.1.6.1 |
brzaccVLVlanManagementPriorityApplicable to all units. Priority tagging for management frames. Range: 0 to 7.rw INTEGER ( 0..7 ) .1.3.6.1.4.1.12394.1.1.5.1.6.2 |
brzaccVLVlanPriorityThresholdApplicable to all units. Not applicable to units with SW version 3.1 or higher. Priority threshold for tagged frames received from Ethernet port. Applicable to Hybrid Link and Trunk Link only. Valid values: 0-7.rw Enumeration .1.3.6.1.4.1.12394.1.1.5.1.6.3 |
brzaccVLVLANQinQ OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.5.1.7 |
brzaccVLQinQEthertypeApplicable to AU and SU. Not applicable to BreezeNET-B units. The Ethernet type of the Service Provider Tag. The range is 0x8100(33024) - 0x9000(36864), 0x9100(37120), 0x9200(37376).rw INTEGER (33024 .. 36864|37120|37376) .1.3.6.1.4.1.12394.1.1.5.1.7.1 |
brzaccVLQinQProviderVlanIDApplicable to SU only. VLAN ID of the Service Provider Tag.rw INTEGER .1.3.6.1.4.1.12394.1.1.5.1.7.2 |
brzaccVLVlanExtendedAccessRulesTableStarting with version 6.0. Available for SU/RB units only. An 8-VLAN Rule Table for Extended Access Link. SEQUENCE OF BrzaccVLVlanExtendedAccessRulesEntry .1.3.6.1.4.1.12394.1.1.5.1.8 |
brzaccVLVlanExtendedAccessRulesEntryStarting with version 6.0. Available for SU/RB units only. An entry in VLAN Rule Table for Extended Access Link. BrzaccVLVlanExtendedAccessRulesEntry .1.3.6.1.4.1.12394.1.1.5.1.8.1 |
brzaccVLVlanExtendedAccessRulesTableIdxStarting with version 6.0. Available for SU/RB units only. A table index for a VLAN Rule entry/rule in the VLAN Rule Table for Extended Access Link.ro INTEGER .1.3.6.1.4.1.12394.1.1.5.1.8.1.1 |
brzaccVLVlanExtendedAccessRuleIdStarting with version 6.0. Available for SU/RB units only. Identifies the VLAN Rule type of an entry/rule, in VLAN Rule Table for Extended Access Link.rw Enumeration .1.3.6.1.4.1.12394.1.1.5.1.8.1.2 |
brzaccVLVlanExtendedAccessRuleVlanIdStarting with version 6.0. Available for SU/RB units only. Identifies the data VLAN ID of an entry/rule, in VLAN Rule Table for Extended Access Link. Range: 1-4094. Value zero is returned if no rule defined for this entry.rw INTEGER .1.3.6.1.4.1.12394.1.1.5.1.8.1.3 |
brzaccVLVlanExtendedAccessRulePriorityStarting with version 6.0. Applicable to SU/RB units only. Identifies the Priority tagging for data frames, for an entry/rule, in VLAN Rule Table for Extended Access Link. Range: 0-7. Value 255 is returned if no rule defined for this entry.rw INTEGER ( 0..7 | 255 ) .1.3.6.1.4.1.12394.1.1.5.1.8.1.4 |
brzaccVLVlanExtendedAccessRuleMulticastAllowedStarting with version 6.0. Available for SU/RB units only. Determine if Multicast frames are tagged and sent on wireless LAN. Option for an entry/rule, in VLAN Rule Table for Extended Access Link. Value 255 is returned if no rule defined for this entry.rw Enumeration .1.3.6.1.4.1.12394.1.1.5.1.8.1.5 |
brzaccVLVlanExtendedAccessRuleOpTypeStarting with version 6.0. Available for SU/RB units only. Identifies the VLAN Operand type of an entry/rule, in VLAN Rule Table for Extended Access Link. Range: 1-4. Value 255 is returned if no rule or default rule defined for this entry. Accepted combinations are: sourceMacAddress, destinationMacAddress - value, range, mask; sourceIpAddress, destinationIpAddress - value, range, mask; sourceUdpPort, destinationUdpPort - value, range, enumeration; sourceTcpPort, destinationTcpPort - value, range, enumeration; ipProtocol - value, enumerationrw Enumeration .1.3.6.1.4.1.12394.1.1.5.1.8.1.6 |
brzaccVLVlanExtendedAccessRuleOperandsStarting with version 6.0. Available for SU/RB units only. The VLAN Operand list of an entry/rule, in VLAN Rule Table for Extended Access Link. Operand list may be one of the following: v1-v2 : range (v1 - v2), v1 and v2 included (not applicable for IP protocols); v,m : value and mask (for MAC and IP only); v0 : single value; v1,v2,v3 : max 8-value enumeration (for Ports and IP protocols only). An operand may be: xxxxxxxxxxxx : 12-char hexadecimal representation of a MAC address; ddd.ddd.ddd.ddd : max 15-char decimal representation of an IP address; ddddd : max 5-char decimal representation of a Port; ddd : max 3-char decimal representation of an IP Protocol. Up to 63 printable ASCII characters.rw DisplayString .1.3.6.1.4.1.12394.1.1.5.1.8.1.7 |
brzaccVLVlanExtendedTrunkVlanIDStarting with version 6.0. Available for SU/RB units only. Native VLAN ID value, for Extended Trunk Link.rw INTEGER .1.3.6.1.4.1.12394.1.1.5.1.9 |
brzaccVLBridgeAgingTimeApplicable to all units. Bridge aging time for devices on both the Ethernet and wireless link sides. Range: 20 to 2000 seconds.rw INTEGER .1.3.6.1.4.1.12394.1.1.5.2 |
brzaccVLBroadcastRelayingApplicable to AU only. Not applicable to BreezeNET-B products. Enables/disables the relaying of broadcast messages to the wireless link.rw Enumeration .1.3.6.1.4.1.12394.1.1.5.4 |
brzaccVLUnicastRelayingApplicable to AU only. Not applicable to BreezeNET-B products. Enables/disables the relaying of unicast messages to the wireless link.rw Enumeration .1.3.6.1.4.1.12394.1.1.5.5 |
brzaccVLEthBroadcastFilteringApplicable to SU/RB only. Enables/disables the filtering of Ethernet (layer2) broadcasts. disable : No filtering. onEthernetOnly : Filters broadcasts received on the Ethernet port only. onWirelessOnly : Filters broadcasts received on the Wlan port only. onBothWirelessAndEth: Filters broadcasts received on both ports.rw Enumeration .1.3.6.1.4.1.12394.1.1.5.6 |
brzaccVLEthBroadcastingParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.5.7 |
brzaccVLDHCPBroadcastOverrideFilterApplicable to SU/RB only. Enables or disables the broadcasting of DHCP messages, overriding the general *brzaccVLEthBroadcastFiltering Ethernet broadcast filtering option.rw Enumeration .1.3.6.1.4.1.12394.1.1.5.7.1 |
brzaccVLPPPoEBroadcastOverrideFilterApplicable to SU/RB only. Enables or disables the broadcasting of PPPoE messages, overriding the general *brzaccVLEthBroadcastFiltering Ethernet broadcast filtering option.rw Enumeration .1.3.6.1.4.1.12394.1.1.5.7.2 |
brzaccVLARPBroadcastOverrideFilterApplicable to SU/RB only. Enables or disables the broadcasting of ARP messages, overriding the general *brzaccVLEthBroadcastFiltering Ethernet broadcast filtering option.rw Enumeration .1.3.6.1.4.1.12394.1.1.5.7.3 |
brzaccVLEthBroadcastMulticastLimiterOptionApplicable to all units. Enable/disable the limiter for multicast and broadcast packets.rw Enumeration .1.3.6.1.4.1.12394.1.1.5.7.4 |
brzaccVLEthBroadcastMulticastLimiterThresholdApplicable to all units. The limit on the number of multicast and broadcast packets when the Ethernet Broadcast/Multicast Limiter Option is enabled. Range: 0 to 204800rw INTEGER .1.3.6.1.4.1.12394.1.1.5.7.5 |
brzaccVLEthBroadcastMulticastLimiterSendTrapIntervalApplicable to all units. The minimum time between two successive traps that are sent indicating the number of packets that were dropped by the Ethernet Broadcast/Multicast Limiter since the last trap was sent. Range: 1 to 60 minutesrw INTEGER .1.3.6.1.4.1.12394.1.1.5.7.6 |
brzaccVLToSPriorityParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.5.8 |
brzaccVLToSPrecedenceThresholdApplicable to all units. Not applicable to units with SW version 3.1 or higher. Priority threshold (based on the ToS) for frames received from the Ethernet port. Range: 0 to 7.rw INTEGER .1.3.6.1.4.1.12394.1.1.5.8.1 |
brzaccVLRoamingOptionApplicable to SU/RB only. Disable/enable the roaming feature. When enabled, the SU/RB will start scanning for an AU/BU after about one second of not receiving beacons or data from current AU/BU. Once it found a new AU/BU, it will also send through the wireless network a roaming SNAP on behalf of its clients informing other devices in the network of their new location. When disabled, it will wait for about seven seconds before starting scanning, and it will not send a roaming SNAP.rw Enumeration .1.3.6.1.4.1.12394.1.1.5.9 |
brzaccVLMacAddressDenyList OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.5.10 |
brzaccVLMacAddressDenyListTableStarting with version 5.0, this is deprecated. Use brzaccVLNewMacAddressDenyListTable instead. Applicable to AU only. Not applicable to BreezeNET-B units. A list of up to 100 MAC Addresses of SUs. If brzaccVLMacAddressDenyListAction is set to denyList, these are SUs that are not allowed to transfer data to the AU. If brzaccVLMacAddressDenyListAction is set to allowList, only these SUs are allowed to transfer data to the AU. SEQUENCE OF BrzaccVLMacAddressDenyListEntry .1.3.6.1.4.1.12394.1.1.5.10.1 |
brzaccVLMacAddressDenyListEntryApplicable to AU only. Not applicable to BreezeNET-B units. An entry in the Mac Address Deny List Table. BrzaccVLMacAddressDenyListEntry .1.3.6.1.4.1.12394.1.1.5.10.1.1 |
brzaccVLMacAddressDenyListTableIdxApplicable to AU only. Not applicable to BreezeNET-B units. A read only table index for a MAC Address entry in the Mac Address Deny List Table. Range: 1 to 100.ro INTEGER .1.3.6.1.4.1.12394.1.1.5.10.1.1.1 |
brzaccVLMacAddressDenyListIdApplicable to AU only. Not applicable to BreezeNET-B units. The list of MAC Addresses in the Mac Address Deny List Table. To Remove a MAC Address - SET the corresponding entry to 0. To Add a new MAC Address - SET an entry which is currently 0.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.5.10.1.1.2 |
brzaccVLMacAddressDenyListAddApplicable to AU only. Not applicable to BreezeNET-B units. Add a MAC address to the MAC Address Deny List Tablerw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.5.10.2 |
brzaccVLMacAddressDenyListRemoveApplicable to AU only. Not applicable to BreezeNET-B units. Delete a MAC address from the MAC Address Deny List Tablerw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.5.10.3 |
brzaccVLNumberOfMacAddressesInDenyListApplicable to AU only. Not applicable to BreezeNET-B units. Number of MAC addresses in the MAC Address Deny List Table.ro Enumeration .1.3.6.1.4.1.12394.1.1.5.10.4 |
brzaccVLMacAddressDenyListActionApplicable to AU only. Define the action to be used by the Mac Address Deny List. allowedList(2) means that the list becomes Allow list.rw Enumeration .1.3.6.1.4.1.12394.1.1.5.10.5 |
brzaccVLNewMacAddressDenyListTableApplicable to AU only. Not applicable to BreezeNET-B units. A list of up to 100 MAC Addresses of SUs. If brzaccVLMacAddressDenyListAction is set to denyList, these are SUs that are not allowed to transfer data to the AU. If brzaccVLMacAddressDenyListAction is set to allowList, only these SUs are allowed to transfer data to the AU. SEQUENCE OF BrzaccVLNewMacAddressDenyListEntry .1.3.6.1.4.1.12394.1.1.5.10.6 |
brzaccVLNewMacAddressDenyListEntryApplicable to AU only. Not applicable to BreezeNET-B units. An entry in the Mac Address Deny List Table. BrzaccVLNewMacAddressDenyListEntry .1.3.6.1.4.1.12394.1.1.5.10.6.1 |
brzaccVLNewMacAddressDenyListIdApplicable to AU only. Not applicable to BreezeNET-B units. The list of MAC Addresses in the Mac Address Deny List Table.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.5.10.6.1.1 |
brzaccVLNewMacAddressDenyListCommandApplicable to AU only. Not applicable to BreezeNET-B units. Supports only active(1), createAndGo(4) and destroy(6). Used for add or destroy entry.rw Enumeration .1.3.6.1.4.1.12394.1.1.5.10.6.1.2 |
brzAccVLPortsControl OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.5.11 |
brzaccVLEthernetPortControlApplicable to SU/RB only. Enable/disable the Ethernet port. When disabled, only data frames are blocked. Management frames are accepted.rw Enumeration .1.3.6.1.4.1.12394.1.1.5.11.1 |
brzaccVLSendBroadcastsMulticastsAsUnicastsApplicable to BU only. When enabled the Multicast/Broadcast packets are sent by BU as Unicast packets to RB. When disabled the Multicast/Broadcast packets are sent by BU as Broadcast packets to RBrw Enumeration .1.3.6.1.4.1.12394.1.1.5.12 |
brzaccVLAirInterface OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.6 |
brzaccVLESSIDParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.6.1 |
brzaccVLESSIDApplicable to all units. The Extended Service Set ID (ESSID) used to prevent the merging of collocated systems. The ESSID is accessible only with the write community string (administrator password). Up to 31 printable case sensitive ASCII characters.rw DisplayString .1.3.6.1.4.1.12394.1.1.6.1.1 |
brzaccVLOperatorESSIDOptionApplicable to AU/BU only. Enabling/disabling the use of the Operator ESSID.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.1.2 |
brzaccVLOperatorESSIDApplicable to AU/BU only. A secondary ESSID to support easy installation of SUs as well as the use of the Best AU/BU feature. Accessible only with SNMP Write Community Up to 31 printable case sensitive ASCII characters.rw DisplayString .1.3.6.1.4.1.12394.1.1.6.1.3 |
brzaccVLRunTimeESSIDApplicable to SU/RB only. The ESSID of the associated AU/BU. Accessible only with SNMP Write Community. Up to 31 printable ASCII characters, case sensitive.ro DisplayString .1.3.6.1.4.1.12394.1.1.6.1.4 |
brzaccVLHiddenESSIDParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.6.1.5 |
brzaccVLAUHiddenESSIDOptionApplicable to AU/BU only. Enabling/disabling the use of the Hidden ESSID.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.1.5.1 |
brzaccVLSUHiddenESSIDSupportApplicable to SU/RB only. Enabling/Disabling the option for an SU/RB to associate with an AU/BU that is using Hidden ESSIDrw Enumeration .1.3.6.1.4.1.12394.1.1.6.1.5.2 |
brzaccVLSUHiddenESSIDTimeoutApplicable to SU/RB only. If an AU/BU rejects the subscribers because of worng ESSID the SU/RB will try again to associate with this AU/BU only after this period of time. The time is given in minutesrw INTEGER .1.3.6.1.4.1.12394.1.1.6.1.5.3 |
brzaccVLMaximumCellRadiusApplicable to all units. For AU/BU: read-write. In units with SW version 2.0 and up - applicable only when the Cell Distance Mode is set to Manual. The highest distance from the AU/BU of any SU/RB served by it. Affects the maximum time the units wait for a response message and the slot size by taking into account the round trip propagation delay. For SU/RB: read-only. The distance is learned from the AU/BU. Range: For units below version 2.0 the range is 0 - 50000 Meters. Otherwise - the range is 0 to 54 Kilometers. 0 means no compensation (minimum slot size, maximal delay timeout).rw INTEGER .1.3.6.1.4.1.12394.1.1.6.2 |
brzaccVLAIFSApplicable to AU and SU. Not applicable to BreezeNET-B products. Not applicable if Wireless Link Prioritization is enabled. Arbitration Inter-Frame Spacing (AIFS) value, in slots. This is the number of time slots that define the DIFS. (DIFS=SIFS+AIFS). A value of 1 should be used only in point-to-point applications to allow one unit to have advantage over the other unit.rw INTEGER ( 1..50 ) .1.3.6.1.4.1.12394.1.1.6.3 |
brzaccVLWirelessTrapThresholdApplicable to AU/BU only. A wireless link quality threshold, expressed in % of retransmissions, for sending the brzaccVLAUWirelessQualityTRAP. This trap indicate whether the quality has gone below or above the specified threshold. The Threshold Range: 1 to 100 (% retransmissions).rw INTEGER .1.3.6.1.4.1.12394.1.1.6.4 |
brzaccVLTransmitPowerTableApplicable to all units. A table of transmit power parameters. SEQUENCE OF BrzaccVLTransmitPowerEntry .1.3.6.1.4.1.12394.1.1.6.5 |
brzaccVLTransmitPowerEntryApplicable to all units. An entry in the Transmit Power Table. BrzaccVLTransmitPowerEntry .1.3.6.1.4.1.12394.1.1.6.5.1 |
brzaccVLTransmitPowerIdxApplicable to all units. An index of an entry in the Transmit Power Table.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.5.1.1 |
brzaccVLApplicableModulationLevelApplicable to all units. The applicable modulation level for an entry in the Transmit Power Table. Level 8 is not applicable to units with HW revision A.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.5.1.2 |
brzaccVLMaximumTxPowerRangeApplicable to all units. The allowed range for the brzaccVLTxPower parameter at the applicable modulation level . Range: -10 to the maximum allowed power level at the applicable modulation level , in dBm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.5.1.3 |
brzaccVLTxPowerApplicable to all units. Read-only for units with SW version 4.0 and higher. In AU/BU: The transmit power in dBm defined for the applicable rate. In SU/RB: If ATPC is disabled, this is the transmit power in dBm defined for the applicable rate. If ATPC is enabled, it serves as the initial transmit power in dBm for the ATPC algorithm. In SU/RB: The range is -10 dBm to the power value defined by brzaccVLMaximumTxPower for the applicable modulation level. In AU/BU: The range is -10 dBm to the power value defined by brzaccVLMaximumTxPowerRange for the applicable modulation level.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.5.1.4 |
brzaccVLCurrentTxPowerApplicable to SU/RB. The actual transmit power in dBm for the applicable rate. Range: -17 to the maximum value defined by brzaccVLMaximumTxPowerRange for the applicable modulation level.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.5.1.5 |
brzaccVLMaximumTransmitPowerTableApplicable to SU/RB only. A table of maximum transmit power parameters. SEQUENCE OF BrzaccVLMaximumTransmitPowerEntry .1.3.6.1.4.1.12394.1.1.6.6 |
brzaccVLMaximumTransmitPowerEntryApplicable to SU/RB only. An entry in the Maximum Transmit Power Table. BrzaccVLMaximumTransmitPowerEntry .1.3.6.1.4.1.12394.1.1.6.6.1 |
brzaccVLMaximumTransmitPowerIdxApplicable to SU/RB only. An index of an entry in the Maximum Transmit Power Table.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.6.1.1 |
brzaccVLMaxTxApplicableModulationLevelApplicable to SU/RB only. The applicable modulation level for an entry in the Maximum Transmit Power Table. Level 8 is not applicable to units with HW revision A.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.6.1.2 |
brzaccVLDefinedMaximumTxPowerRangeApplicable to SU/RB only. The allowed range for the brzaccVLMaxTxPower parameter at the applicable modulation level . Range: -10 to the maximum allowed power level at the applicable modulation level , in dBm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.6.1.3 |
brzaccVLMaxTxPowerApplicable to SU/RB only. Read-only for units with SW version 4.0 and higher. The maximum value that can be configured for the brzaccVLTxPower parameter. This is also the maximum power level that can be reached by the ATPC algorithm. The range is -10 dBm to the maximum value defined by brzaccVLDefinedMaximumTxPowerRange for the applicable modulation level.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.6.1.4 |
brzaccVLMaxNumOfAssociationsApplicable to AU only. Not applicable to BreezeNET-B products. Sets the upper limit for the number of SUs that can be associated with the AU. Range: For regular AUs (AU-BS, AU-SA, AU) the range is from 0 to 512 if encryption is disabled the range id form 0 to 124 if encryption is enabled For AUS-BS and AUS-SA with SW version 4.0 and higher the range is between 0 to 8 or 25 (via licensing). For AUS-BS and AUS-SA with SW version below 4.0 the range is between 0 to 5. BreezeNET-B products return 65535.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.10 |
brzaccVLBestAu OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.6.11 |
brzaccVLBestAuSupportApplicable to SU/RB only. Disable/enable the Best AU/BU selection mechanism.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.11.1 |
brzaccVLBestAuNoOfScanningAttemptsApplicable to SU/RB only. The number of scanning attempts to collect information for the Best AU/BU decision. Range: 1 to 255.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.11.2 |
brzaccVLPreferredAuMacAddressApplicable to SU/RB only. The MAC address of the preferred AU/BU (overriding the Best AU/BU selection process). 000000000000 means no preferred AU/BU.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.11.3 |
brzaccVLNeighborAuTableApplicable to SU/RB only. A table of data on neighboring AUs/BUs. SEQUENCE OF BrzaccVLNeighborAuEntry .1.3.6.1.4.1.12394.1.1.6.11.4 |
brzaccVLNeighborAuEntryApplicable to SU/RB only. An entry in the Neighbor AU/BU Table. BrzaccVLNeighborAuEntry .1.3.6.1.4.1.12394.1.1.6.11.4.1 |
brzaccVLNeighborAuIdxApplicable to SU/RB only. An index of an entry in the Neighbor AU/BU Table.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.11.4.1.1 |
brzaccVLNeighborAuMacAddApplicable to SU/RB only. A MAC address of an AU/BU in the Neighbor AU/BU Table.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.11.4.1.2 |
brzaccVLNeighborAuESSIDApplicable to SU/RB only. The ESSID of an AU/BU in the Neighbor AU/BU Table. Accessible only with SNMP Write Community.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.11.4.1.3 |
brzaccVLNeighborAuSNRApplicable to SU/RB only. The received signal quality (SNR) in dB of an AU/BU in the Neighbor AU/BU Table. If the returned value is 255 this means that the indication is not available.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.11.4.1.4 |
brzaccVLNeighborAuAssocLoadStatusApplicable to SU/RB only. Neighbor AU/BU association load status in the Neighbor AU/BU Table.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.11.4.1.5 |
brzaccVLNeighborAuMarkApplicable to SU/RB only. Neighbor AU/BU mark in the Neighbor AU/BU Table.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.11.4.1.6 |
brzaccVLNeighborAuHwRevisionApplicable to SU/RB only. Neighbor AU/BU HW revision in the Neighbor AU/BU Table.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.11.4.1.7 |
brzaccVLNeighborAuCountryCodeApplicable to SU/RB only. Neighbor AU/BU supported country code in the Neighbor AU/BU Table.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.11.4.1.8 |
brzaccVLNeighborAuSwVerApplicable to SU/RB only. Neighbor AU/BU SW version in the Neighbor AU/BU Table.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.11.4.1.9 |
brzaccVLNeighborAuAtpcOptionApplicable to SU/RB only. Neighbor AU/BU ATPC option configuration in the Neighbor AU/BU Table.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.11.4.1.10 |
brzaccVLNeighborAuAdapModOptionApplicable to SU/RB only. Neighbor AU/BU adaptive modulation option configuration in the Neighbor AU/BU Table.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.11.4.1.11 |
brzaccVLNeighborAuBurstModeOptionApplicable to SU/RB only. Neighbor AU/BU burst mode option configuration in the Neighbor AU/BU Table.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.11.4.1.12 |
brzaccVLNeighborAuDfsOptionApplicable to SU/RB only. Neighbor AU/BU DFS option configuration in the Neighbor AU/BU Table.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.11.4.1.14 |
brzaccVLNeighborAuConcatenationOptionApplicable to SU/RB only. Neighbor AU/BU concatenation option configuration in the Neighbor AU/BU Table.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.11.4.1.15 |
brzaccVLNeighborAuLearnCountryCodeBySUApplicable to SU only. Starting with 4.0 is not applicable for BA4900 and BreezeNET B products. Neighbor AU Learn Country Code by SU configuration in the Neighbor AU Table.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.11.4.1.17 |
brzaccVLNeighborAuSecurityModeApplicable to SU/RB only. Neighbor AU/BU security mode configuration in the Neighbor AU/BU Table.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.11.4.1.18 |
brzaccVLNeighborAuAuthOptionApplicable to SU/RB only. Neighbor AU/BU authentication option configuration in the Neighbor AU/BU Table.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.11.4.1.19 |
brzaccVLNeighborAuDataEncyptOptionApplicable to SU/RB only. Neighbor AU/BU data encryption option configuration in the Neighbor AU/BU Table.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.11.4.1.20 |
brzaccVLNeighborAuPerSuDistanceLearningApplicable to SU only. Neighbor AU per SU distance learning option configuration in the Neighbor AU Table.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.11.4.1.21 |
brzaccVLNeighborAuRSSIApplicable to SU/RB only. The Recieved Signal Strength Indication of an AU/BU in the Neighbor AU/BU Table. If the returned value is 255 this means that the indication is not available. This value is given in dBm units.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.11.4.1.22 |
brzaccVLFrequencyDefinition OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.6.12 |
brzaccVLSubBandLowerFrequencyApplicable to SU only. Not applicable to units with SW version 2.0 or higher. The lowest frequency in the subset to be used for scanning. For 5.8GHz products the range is 5740 to 5830 MHz using 10MHz resolution. For 4.9GHz products the range is 4920 to 5080 MHz using 10MHz resolution. For HW Revision C and above this leaf is not relevant - shall return 0.rwobsolete INTEGER .1.3.6.1.4.1.12394.1.1.6.12.1 |
brzaccVLSubBandUpperFrequencyApplicable to SU only. Not applicable to units with SW version 2.0 or higher. The highest frequency in the subset to be used for scanning. For 5.8GHz products the range is 5740 to 5830 MHz using 10MHz resolution. For 4.9GHz products the range is 4920 to 5080 MHz using 10MHz resolution. For HW Revision C and above this leaf is not relevant - shall return 0.rwobsolete INTEGER .1.3.6.1.4.1.12394.1.1.6.12.2 |
brzaccVLScanningStepApplicable to all units - For flexible Sub-Bands only. For units with version 2.0 and above this is a read-only parameter. The scanning step to be used for generating the frequency subset.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.12.3 |
brzaccVLFrequencySubsetTableApplicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. The Frequency Subset Table that includes all frequencies from the selected Sub-band. SEQUENCE OF BrzaccVLFrequencySubsetEntry .1.3.6.1.4.1.12394.1.1.6.12.4 |
brzaccVLFrequencySubsetEntryApplicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. An entry in the Frequency Subset Table. BrzaccVLFrequencySubsetEntry .1.3.6.1.4.1.12394.1.1.6.12.4.1 |
brzaccVLFrequencySubsetTableIdxApplicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. An index of an entry in the Frequency subset Table.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.12.4.1.1 |
brzaccVLFrequencySubsetFrequencyApplicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. Applicable to all units with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLFrequencySubsetFrequencyNew to support a resolution of 0.5 MHz). The frequency in MHz of an entry in the Frequency Subset table.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.12.4.1.2 |
brzaccVLFrequencySubsetActiveApplicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. The status of an entry in the Frequency subset Table. The frequency of an active entry will be included in the final list of frequencies to be used for scanning.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.12.4.1.3 |
brzaccVLFrequencySubsetFrequencyNewApplicable to all units. Not applicable to SU/RB with SW version 4.0 and higher. The frequency in MHz of an entry in the Frequency Subset table. (Replaces brzaccVLFrequencySubsetFrequency to support a resolution of 0.5 MHz for units with HW revision C and higher).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.12.4.1.4 |
brzaccVLSetSelectedFreqSubsetApplicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. Apply the selected subset. After the next reset the new subset will be used.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.12.5 |
brzaccVLCurrentFrequencySubsetTableApplicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. The Current Frequency Subset table. In SU/RB it includes all frequencies that are currently used for scanning. In AU/BU it includes all frequencies that can be used by the DFS mechanism (if applicable) SEQUENCE OF BrzaccVLCurrentFrequencySubsetEntry .1.3.6.1.4.1.12394.1.1.6.12.6 |
brzaccVLCurrentFrequencySubsetEntryApplicable to SU/RB and to AU/BU. An entry in the Current Frequency Subset Table. BrzaccVLCurrentFrequencySubsetEntry .1.3.6.1.4.1.12394.1.1.6.12.6.1 |
brzaccVLCurrentFrequencySubsetTableIdxApplicable to SU/RB and to AU/BU. An index of an entry in the Current Frequency subset Table. Not applicable to SU/RB with SW version 4.0 and higher.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.12.6.1.1 |
brzaccVLCurrentFrequencySubsetFrequencyApplicable to all units. Not applicable to SU/RB with SW version 4.0 and higher. Applicable to all units with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLCurrentFrequencySubsetFrequencyNew to support a resolution of 0.5 MHz). The frequency in MHz of an entry in the Current Frequency Subset table.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.12.6.1.2 |
brzaccVLCurrentFrequencySubsetFrequencyNewApplicable to all units. Not applicable to SU/RB with SW version 4.0 and higher. The frequency in MHz of an entry in the Current Frequency Subset table. (Replaces brzaccVLCurrentFrequencySubsetFrequency to support a resolution of 0.5 MHz for units with HW revision C and higher).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.12.6.1.3 |
brzaccVLCurrentAUOperatingFrequencyApplicable to AU/BU with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLCurrentUOperatingFrequencyNew to support a resolution of 0.5 MHz). The operating frequency in MHz. For 5.8GHz products with SW version below 2.0 the range is 5740 to 5830 MHz using 10MHz resolution. For units with SW version 2.0 and up the range is as defined in the selected Sub Band.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.12.7 |
brzaccVLAUDefinedFrequencyApplicable to AU/BU with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLAUDefinedFrequencyNew to support a resolution of 0.5 MHz). For 5.8GHz products with SW version below 2.0 this is the frequency in MHz of the AU/BU after the next reset. For units with SW version 2.0 and up this is the frequency in MHz to use when the DFS Option is disabled. For 5.8GHz products with SW version below 2.0 the range is 5740 to 5830 MHz using 10MHz resolution. For units with SW version 2.0 and up the range is as defined in the selected Sub Band.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.12.8 |
brzaccVLCurrentSUOperatingFrequencyApplicable to SU/RB only. The frequency used currently by the unit. For 5.8GHz products with SW version below 2.0 the range is 5740 to 5830 MHz using 10MHz resolution. For units with SW version 2.0 and up the range is as defined in the selected Sub Band.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.12.9 |
brzaccVLSubBandSelect OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.6.12.10 |
brzaccVLSelectSubBandIndexApplicable to all units with SW version below 4.0 For units with SW version 4.0 and up it is applicable only for AU/BU. For SU/RB it defines only the sub-band for the Spectrum Analyzer. The ID of the sub-band configured in the unit. Its range depends on unit's type and Country Code.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.12.10.1 |
brzaccVLDFSParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.6.12.11 |
brzaccVLDFSOptionApplicable to AU/BU. Applicable to SU/RB with SW version 5.5.20 and higher. Enabling/disabling the DFS Algorithm. Not applicable if DFS Option is not supported by the current Sub Band.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.12.11.1 |
brzaccVLDFSChannelCheckTimeApplicable to AU/BU. Applicable to SU/RB with SW version 5.5.20 and higher. Channel Availability Check time defines the time the unit checks the channel for presence of radar signals and does not transmit after power up or association or after moving to a new channel due to detecting radar in the used channel. Range: 1 to 3600 (seconds).rw INTEGER .1.3.6.1.4.1.12394.1.1.6.12.11.3 |
brzaccVLDFSChannelAvoidancePeriodApplicable to AU/BU. Applicable to SU/RB with SW version 5.5.20 and higher. Defines the time after detecting radar signals in a channel of avoiding using the channel or adjacent channels in accordance with the bandwidth. Range: 1 to 60 (minutes).rw INTEGER .1.3.6.1.4.1.12394.1.1.6.12.11.4 |
brzaccVLDFSSuWaitingOptionApplicable to AU/BU only. Defines whether the associated SUs should wait for this AU/BU after it stopped transmitting due to radar detection, before they starts scanning for other AUs/BUs.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.12.11.5 |
brzaccVLDFSClearRadarDetectedChannelsAfterResetApplicable to all units with SW version 5.5.20 and higher. Clear Radar Detected and Adjacent to Radar channels after unit reset. Returns the unit to operate in default frequency.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.12.11.6 |
brzaccVLDFSRadarDetectionChannelsTableApplicable to AU/BU only. Applicable only when DFS option is on. Displays the current channels defined in the sub-band and their radar detection status. SEQUENCE OF BrzaccVLDFSRadarDetectionChannelsEntry .1.3.6.1.4.1.12394.1.1.6.12.11.7 |
brzaccVLDFSRadarDetectionChannelsEntryApplicable to AU/BU only. An entry in the brzaccVLDFSRadarDetectionChannelsTable. BrzaccVLDFSRadarDetectionChannelsEntry .1.3.6.1.4.1.12394.1.1.6.12.11.7.1 |
brzaccVLDFSChannelIdxApplicable to AU/BU only. Read-only. The index of the entry in the brzaccVLDFSRadarDetectionChannelsTable.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.12.11.7.1.1 |
brzaccVLDFSChannelFrequencyApplicable to AU/BU with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLDFSChannelFrequency New to support a resolution of 0.5 MHz). The frequency in MHz of a channel in the DFS Radar Detection Channels Table.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.12.11.7.1.2 |
brzaccVLDFSChannelRadarStatusApplicable to AU/BU only. The radar detection status of a channel in brzaccVLDFSRadarDetectionChannelTable.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.12.11.7.1.3 |
brzaccVLDFSChannelFrequencyNewApplicable to AU/BU. The frequency of a channel in the DFS Radar Detection Channels Table. (Replaces brzaccVLDFSChannelFrequency to support a resolution of 0.5 MHz for units with HW revision C and higher).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.12.11.7.1.4 |
brzaccVLDFSMinimumPulsesToDetectApplicable to AU/BU. Applicable to SU/RB with SW version 5.5.20 and higher. Defines the minimum number of pulses to detect a radar. Range: 1 - 100.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.12.11.8 |
brzaccVLDFSChannelReuseParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.6.12.11.9 |
brzaccVLDFSChannelReuseOptionApplicable to AU/BU only. Enabling/disabling the DFS Channel Reuse Algorithm. Not applicable if DFS Option is not supported by the current Sub Band.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.12.11.9.1 |
brzaccVLDFSRadarActivityAssessmentPeriodApplicable to AU/BU only. Range: 1 to 12 (Houres).rw INTEGER .1.3.6.1.4.1.12394.1.1.6.12.11.9.2 |
brzaccVLDFSMaximumNumberOfDetectionsInAssessmentPeriodApplicable to AU/BU only. Range: 1 to 10 (Times).rw INTEGER .1.3.6.1.4.1.12394.1.1.6.12.11.9.3 |
brzaccVLDFSDetectionAlgorithmApplicable to AU/BU. Applicable to SU/RB with SW version 5.5.20 and higher. Defines the DFS Detection Algorithm.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.12.11.10 |
brzaccVLDFSRemoteRadarEventReportsApplicable to AU only with SW version 5.5.20 and higher. Defines the number of SU radar reports for the AU to leave channel . Range: 0 - 512.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.12.11.11 |
brzaccVLDFSRemoteRadarEventMonitoringPeriodApplicable to AU only with SW version 5.5.20 and higher. Defines the interval in minutes of accumulated SU Radar Reports for the AU to leave channel. Range: 1 - 30.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.12.11.12 |
brzaccVLEnhancedETSIRadarDetectionApplicable to AU/BU units with software version 5.5.27.1 and higher.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.12.11.13 |
brzaccVLCountryCodeLearningBySUApplicable to AU only. Starting with 4.0 it is not applicable for BA4900 and BreezeNET B. Defines whether the SUs learn the country code of the AU.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.12.12 |
brzaccVLCurrentAUOperatingFrequencyNewApplicable to AU/BU. The operating frequency in MHz. (Replaces brzaccVLCurrentAUOperatingFrequency to support a resolution of 0.5 MHz for units with HW revision C and higher). For 5.8GHz products with SW version below 2.0 the range is 5740 to 5830 MHz using 10MHz resolution. For units with SW version 2.0 and up the range is as defined in the selected Sub Band.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.12.13 |
brzaccVLAUDefinedFrequencyNewApplicable to AU/BU. For 5.8GHz products with SW version below 2.0 this is the frequency in MHz of the AU/BU after the next reset. For units with SW version 2.0 and up this is the frequency in MHz to use when the DFS Option is disabled. (Replaces brzaccVLAUDefinedFrequency to support a resolution of 0.5 MHz for units with HW revision C and higher). For 5.8GHz products with SW version below 2.0 the range is 5740 to 5830 MHz using 10MHz resolution. For units with SW version 2.0 and up the range is as defined in the selected Sub Band.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.12.14 |
brzaccVLAutoSubBandSelect OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.6.12.15 |
brzaccVLAutoSubBandSelectedFreqSubsetApplicable to SU/RB with SW version 4.0 and higher. Apply the selected subset. After the next reset the new subset will be used for scanning.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.12.15.1 |
brzaccVLAutoSubBandFrequencySubsetTableApplicable to SU/RB with SW version 4.0 and higher. The Frequency Subset Table that includes all available sub-bands and all the frequencies in these sub-bands. SEQUENCE OF BrzaccVLAutoSubBandFrequencySubsetEntry .1.3.6.1.4.1.12394.1.1.6.12.15.2 |
brzaccVLAutoSubBandFrequencySubsetEntryApplicable to SU/RB with SW version 4.0 and higher. An entry in the Frequency Subset Table. BrzaccVLAutoSubBandFrequencySubsetEntry .1.3.6.1.4.1.12394.1.1.6.12.15.2.1 |
brzaccVLAutoSubBandFrequencySubsetBandIdxApplicable to SU/RB with SW version 4.0 and higher. The index of the applicable Sub Band. This is the Sub Band ID of the relevant entry in the Country Dependent Parameters table. Serves also as an index of the entry in the Frequency subset Table.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.12.15.2.1.1 |
brzaccVLAutoSubBandFrequencySubsetFrequencyIdxApplicable to SU/RB with SW version 4.0 and higher. The index of the applicable frequency in the applicable Sub Band. Serves also as an index of the entry in the Frequency subset Table.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.12.15.2.1.2 |
brzaccVLAutoSubBandFrequencySubsetActiveApplicable to SU/RB with SW version 4.0 and higher. The status of an entry in the Auto Sub Band Frequency subset Table. The frequency of an active entry will be included in the final list of frequencies to be used for scanning.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.12.15.2.1.3 |
brzaccVLAutoSubBandFrequencySubsetFrequencyApplicable to SU/RB with SW version 4.0 and higher. The frequency in MHz of the entry in the Auto Sub Band Frequency Subset table.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.12.15.2.1.4 |
brzaccVLAutoSubBandFrequencySubsetBandwidthApplicable to SU/RB with SW version 4.0 and higher. The bandwidth in MHz of the entry in the Auto Sub Band Frequency Subset table.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.12.15.2.1.5 |
brzaccVLAutoSubBandFrequencySubsetDFSStatusApplicable to SU/RB with SW version 4.0 and higher. The channel status of the entry in the Auto Sub Band Frequency Subset table.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.12.15.2.1.6 |
brzaccVLATPC OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.6.13 |
brzaccVLAtpcOptionApplicable all units. Enabling/disabling the ATPC Algorithm.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.13.1 |
brzaccVLDeltaFromMinSNRLevelApplicable AU/BU only. The Minimum SNR Level plus the value of this parameter define the maximum desired level of the average SNR at the AU/BU. If the ATPC Option is enabled, than if the received SNR is above the maximum desired level, the AU/BU will transmit Power-Down messages to the applicable SU/RB. Range: 4 to 20 (dB).rw INTEGER .1.3.6.1.4.1.12394.1.1.6.13.2 |
brzaccVLMinimumSNRLevelApplicable AU/BU only. Defines the minimum desired level of the average SNR at the AU/BU. Below this level, if *AtpcOption is enabled, the AU/BU will transmit ATPC Power-Up messages to the applicable SU/RB. The *MinimumSNRLevel cannot be higher than *MaximumSNRLevel. Range: 4 to 60 (dB).rw INTEGER .1.3.6.1.4.1.12394.1.1.6.13.3 |
brzaccVLMinimumIntervalBetweenATPCMessagesApplicable AU/BU only. The minimum interval between two consecutive AU/BU to SU/RB messages. Range: 1 to 3600 (Sec).rw INTEGER .1.3.6.1.4.1.12394.1.1.6.13.4 |
brzaccVLPowerLevelStepsApplicable AU/BU only. The step in dB that the SU/RB will use when receiving an ATPC Power-Up/Power-Down message. Range: 1 to 20 (dB).rw INTEGER .1.3.6.1.4.1.12394.1.1.6.13.6 |
brzaccVLAtpcOptionEZApplicable AU only. Enabling/disabling the ATPC Algorithm for EZ.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.13.7 |
brzaccVLCellDistanceParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.6.15 |
brzaccVLCellDistanceModeApplicable AU/BU only. The selected mode of deciding on Cell Distance.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.15.1 |
brzaccVLFairnessFactorApplicable AU/BU only. Not applicable to BreezeNET-B products for SW version below 4.0. The percentage of the maximum distance that is taken into account in the time slot calculation. Range: 0 to 100 (Percent). A value of 0 means the minimal slot size (9 microseconds). BreezeNET-B products with SW version below 4.0 return na. The na value is 255.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.15.2 |
brzaccVLMeasuredCellDistanceApplicable AU/BU only. The Maximum Cell Distance as calculated by the AU/BU. Range: 0 to 54 (Kilometers).ro Enumeration .1.3.6.1.4.1.12394.1.1.6.15.3 |
brzaccVLUnitWithMaxDistanceApplicable AU only. Not applicable to BreezeNET-B units. The MAC address of the unit with the maximum distance from the AU.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.15.4 |
brzaccVLPerSuDistanceLearningAplicable to AU only. Applicable only if Cell Distance Mode is set to Automatic. When disabled, all SUs in the cell will use for the ACK Timeout the computed distance of the farthest SU. When enabled, each SU will use its own computed distancerw Enumeration .1.3.6.1.4.1.12394.1.1.6.15.5 |
brzaccVLScanningModeApplicable to SU/RB only. The scanning mode. In cells where the DFS Option is enabled Scanning Mode is forced to Passive.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.16 |
brzaccVLAntennaGainApplicable to all units. Read-write in units where brzaccVLAntennaGainChange is supported. Read-only in units where brzaccVLAntennaGainChange is not supported. The net gain (including cable attenuation for detached antennas) of the antenna. Range: 0 - to Maximum EIRP defined by country code + 10 (dBi). A value of -2 (this value is configurable only in factory) means don't care. A value of -1 (this value is configurable only in factory) means that the unit will not transmit until the actual value is configured.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.17 |
brzaccVLSpectrumAnalysisParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.6.18 |
brzaccVLSpectrumAnalysisChannelScanPeriodApplicable to all units. The period of staying on each channel for information gathering when performing Spectrum analysis. Range: 2-30 seconds.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.18.1 |
brzaccVLSpectrumAnalysisScanCyclesApplicable to all units. The number of scanning cycles when performing Spectrum Analysis. Range: 1-100.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.18.2 |
brzaccVLAutomaticChannelSelectionApplicable to AU/BU only. Defines weather the AU/BU shall choose the most noise free channel upon startup after spectrum analysis.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.18.3 |
brzaccVLSpectrumAnalysisActivationApplicable to all units. Activates spectrum analysis, the unit is automatically reset upon activation.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.18.4 |
brzaccVLSpectrumAnalysisStatusApplicable to all units. Defines whether the unit is currently performing a Spectrum Analysis process. Value currentlyBlocked means unit current status prohibits Spectrum Analysis activation.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.18.5 |
brzaccVLResetSpectrumCountersApplicable to all units. Resets the spectrum analysis counters.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.18.6 |
brzaccVLSpectrumAnalysisInformationTableApplicable to all units. The spectrum analysis information table. SEQUENCE OF BrzaccVLSpectrumAnalysisInformationEntry .1.3.6.1.4.1.12394.1.1.6.18.7 |
brzaccVLSpectrumAnalysisInformationEntryApplicable to all units. The spectrum analysis information table entry. BrzaccVLSpectrumAnalysisInformationEntry .1.3.6.1.4.1.12394.1.1.6.18.7.1 |
brzaccVLSpectrumAnalysisInformationTableIdxApplicable to all units. A read only table index for a Spectrum Analysis Information entry in the Spectrum Analysis Information Table.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.18.7.1.1 |
brzaccVLSpectrumAnalysisInformationChannelApplicable to all units. The channels in the Spectrum Analysis Information Table. If the unit is currently under spectrum analysis the channels would be those on which the analysis is currently performed. If the unit is in normal mode the channels would be the those on which the last analysis was performed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.18.7.1.2 |
brzaccVLSpectrumAnalysisInformationSignalCountApplicable to all units. The number of signals (excluding OFDM frames) detected in the channel. If the unit is currently under spectrum analysis the count would be of the analysis that is currently performed. If the unit is in normal mode the count would be of the last analysis performed.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.18.7.1.3 |
brzaccVLSpectrumAnalysisInformationSignalSNRApplicable to all units. The approximate SNR of the signals (excluding OFDM frames) detected in the channel. If the unit is currently under spectrum analysis the SNR would be of the analysis that is currently performed. If the unit is in normal mode the SNR would be of the last analysis performed.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.18.7.1.4 |
brzaccVLSpectrumAnalysisInformationSignalWidthApplicable to all units. The average width of the signals (excluding OFDM frames) detected in the channel. If the unit is currently under spectrum analysis the width would be of the analysis that is currently performed. If the unit is in normal mode the width would be of the last analysis performed.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.18.7.1.5 |
brzaccVLSpectrumAnalysisInformationOFDMFramesApplicable to all units. The number of OFDM frames detected in the channel. If the unit is currently under spectrum analysis the count would be of the analysis that is currently performed. If the unit is in normal mode the count would be of the last analysis performed.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.18.7.1.6 |
brzaccVLSpectrumAnalysisInformationOFDMAvgSnrApplicable to all units. The average SNR of the OFDM frames detected in the channel. If the unit is currently under spectrum analysis the average SNR would be of the analysis that is currently performed. If the unit is in normal mode the average SNR would be of the last analysis performed.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.18.7.1.7 |
brzaccVLSpectrumAnalysisInformationAvgNoiseFloorApplicable to all units. The average Noise Floor detected in the channel. If the unit is currently under spectrum analysis the average Noise Floor would be of the analysis that is currently performed. If the unit is in normal mode the average Noise Floor would be of the last analysis performed.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.18.7.1.8 |
brzaccVLSpectrumAnalysisInformationMaxNoiseFloorApplicable to all units. The maximum Noise Floor detected in the channel. If the unit is currently under spectrum analysis the maximum Noise Floor would be of the analysis that is currently performed. If the unit is in normal mode the maximum Noise Floor would be of the last analysis performed.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.18.7.1.9 |
brzaccVLSpectrumAnalysisInformationSignalMaxSNRApplicable to all units. The maximum SNR of the signals (excluding OFDM frames) detected in the channel. If the unit is currently under spectrum analysis the maximum SNR would be of the analysis that is currently performed. If the unit is in normal mode the maximum SNR would be of the last analysis performed.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.18.7.1.10 |
brzaccVLSpectrumAnalysisInformationOFDMMaxSNRApplicable to all units. The maximum SNR of the OFDM frames detected in the channel. If the unit is currently under spectrum analysis the maximum SNR would be of the analysis that is currently performed. If the unit is in normal mode the maximum SNR would be of the last analysis performed.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.18.7.1.11 |
brzaccVLMaxNumOfAssociationsLimitApplicable to AU only. Not applicable to BreezeNET-B products. Shows the limit for the number of SUs that can be associated with the AU. For AU-BS, AU-SA, AU if Data Encryption is enabled, the upper limit is 124, otherwise it is 512. For AUS-BS, AUS-SA with SW version 4.0 and higher the upper limit is 8 or 25 (via licensing). For AUS-BS, AUS-SA with SW version below 4.0 the upper limit is 5. BreezeNET-B products return 65535.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.19 |
brzaccVLDisassociate OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.6.20 |
brzaccVLDisassociateAllSUsApplicable to AU only. The AU shall disassociate all its associated units.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.20.1 |
brzaccVLDisassociateSuByMacAddressApplicable to AU only. The AU shall disassociate the SU with the configured MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.20.2 |
brzaccVLTxControlApplicable to AU/BU only. Tx Control of the AU/BU. Starting with version 4.0 it is run-time. For SW version below 4.0 the unit reset itself. If set to ethernetStatusControl, the unit will not transmit if the Ethernet link is down. This parameter can be configured only via the ethernet port.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.21 |
brzaccVLLostBeaconsWatchdogThresholdApplicable to AU/BU only. The number of unsuccessful consecutive transmissions beacons before Internal refresh is performed. 0 means that the lost beacons watchdog is not used and internal refresh is not performed.rw INTEGER ( 0 | 100..1000 ) .1.3.6.1.4.1.12394.1.1.6.22 |
brzaccVLTransmitPowerApplicable to all units with SW version 4.0 and higher. The uniform transmit power for all modulation levels. For a specific modulation level the effective transmit power (brzaccVLTxPower) is the minimum between the uniform transmit power and the maximum transmit power for that modulation level.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.23 |
brzaccVLMaximumTxPowerApplicable to only SU/RB with SW version 4.0 and higher. The Maximum Transmit Power for all modulation levels. The Maximum Transmit Power for a specific modulation level is the minimum between this parameter and the hardware limitation for that modulation levelrw INTEGER .1.3.6.1.4.1.12394.1.1.6.24 |
brzaccVLCountryCodeParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.6.25 |
brzaccVLCountryCodeReApplyApplicable to all units. Re-apply country code parameters.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.25.1 |
brzaccVLCountryCodeTableApplicable to all units. SEQUENCE OF BrzaccVLCountryCodeEntry .1.3.6.1.4.1.12394.1.1.6.25.2 |
brzaccVLCountryCodeEntryApplicable to all units. BrzaccVLCountryCodeEntry .1.3.6.1.4.1.12394.1.1.6.25.2.1 |
brzaccVLCCNumberApplicable to all units.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.25.2.1.1 |
brzaccVLCCNameApplicable to all units.ro DisplayString .1.3.6.1.4.1.12394.1.1.6.25.2.1.2 |
brzaccVLCCAuthenticationEncryptionSupportApplicable to all units.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.25.2.1.3 |
brzaccVLCCDataEncryptionSupportApplicable to all units.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.25.2.1.4 |
brzaccVLCCAESEncryptionSupportApplicable to all units.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.25.2.1.5 |
brzaccVLCCParamsTableApplicable to all units. A table of country dependent parameters. SEQUENCE OF BrzaccVLCCParamsEntry .1.3.6.1.4.1.12394.1.1.6.25.3 |
brzaccVLCCParamsEntryApplicable to all units. BrzaccVLCCParamsEntry .1.3.6.1.4.1.12394.1.1.6.25.3.1 |
brzaccVLCCNumberIdxApplicable to all units.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.25.3.1.1 |
brzaccVLCCParamsIndexApplicable to all units.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.25.3.1.2 |
brzaccVLCCParamsFrequenciesApplicable to all units. The frequencies included in the applicable sub-band entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.25.3.1.3 |
brzaccVLCCAllowedBandwidthApplicable to all units. The bandwidth when using the applicable the sub-band.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.25.3.1.4 |
brzaccVLCCRegulationMaxTxPowerAtAntennaPortApplicable to all units. The maximum allowed Tx power when using the applicable sub-band. A RegulationMaxTxPowerAtAntennaPort of 255, means no limitro INTEGER .1.3.6.1.4.1.12394.1.1.6.25.3.1.5 |
brzaccVLCCRegulationMaxEIRPApplicable to all units. The maximum Tx EIRP when using the applicable sub-band. A Regulation Max EIRP of 0, means no limit.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.25.3.1.6 |
brzaccVLCCMinModulationLevelApplicable to all units. The minimum supported modulation level.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.25.3.1.7 |
brzaccVLCCMaxModulationLevelApplicable to all units. The maximum supported modulation level.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.25.3.1.8 |
brzaccVLCCBurstModeSupportApplicable to all units. The supported Burst Mode Option.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.25.3.1.9 |
brzaccVLCCMaximumBurstDurationApplicable to all units. Applicable only if Burst Mode Option is supported. The maximum supported burst duration.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.25.3.1.10 |
brzaccVLCCDfsSupportApplicable to AU/BU only. The supported Dfs Option.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.25.3.1.11 |
brzaccVLCCMinimumHwRevisionApplicable to all units. The Minimum HW Revision needed to support the country code.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.25.3.1.12 |
brzaccVLCountryCodeSelectApplicable to all units. Configure the Country Code WARNING: It is the responsibility of the wireless system operator to verify that use of the selected Country Code does not result in violation of the relevant local radio regulations! For more details refer to the Selecting Country Code documentrw INTEGER .1.3.6.1.4.1.12394.1.1.6.25.4 |
brzaccVLNoiseImmunityParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.6.26 |
brzaccVLNoiseImmunityAlgorithmApplicable to all units except for units with HW revision B and lower. automatic(2) is not applicable for units with HW revision F or G. Noise Immunity Algorithmrw Enumeration .1.3.6.1.4.1.12394.1.1.6.26.1 |
brzaccVLNoiseImmunityLevelApplicable to all units except for units with HW revision B and lower. Noise Immunity Level. (255) : Not Availablerw INTEGER ( 0..4 | 255 ) .1.3.6.1.4.1.12394.1.1.6.26.2 |
brzaccVLSpuriousImmunityLevelApplicable to all units except for units with HW revision B and lower. (255) : Not Availablerw INTEGER ( 0..7 | 255 ) .1.3.6.1.4.1.12394.1.1.6.26.3 |
brzaccVLOFDMWeakSignalApplicable to all units except for units with HW revision B and lower.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.26.4 |
brzaccVLPulseDetectionSensitivityApplicable to all units.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.26.5 |
brzaccVLNewTransmitPowerTableApplicable to all units with SW version 5.1 and higher A table of transmit power parameters. SEQUENCE OF BrzaccVLNewTransmitPowerEntry .1.3.6.1.4.1.12394.1.1.6.27 |
brzaccVLNewTransmitPowerEntryApplicable to all units with SW version 5.1 and higher An entry in the Transmit Power Table. BrzaccVLNewTransmitPowerEntry .1.3.6.1.4.1.12394.1.1.6.27.1 |
brzaccVLNewModulationLevelIdxApplicable to all units with SW version 5.1 and higher. An index ( and modulation level ) of an entry in the NewTransmitPowerTable.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.27.1.1 |
brzaccVLNewMaximumTxPowerRangeApplicable to all units with SW version 5.1 and higher. The allowed range for the brzaccVLNewTxPower parameter at the applicable modulation level . Range: -10 to the maximum allowed power level at the applicable modulation level , in dBm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.27.1.2 |
brzaccVLNewTxPowerApplicable to all units with SW version 5.1 and higher. In AU/BU: The transmit power in dBm defined for the applicable rate. In SU/RB: If ATPC is disabled, this is the transmit power in dBm defined for the applicable rate. If ATPC is enabled, it serves as the initial transmit power in dBm for the ATPC algorithm. In SU/RB: The range is -10 dBm to the power value defined by brzaccVLNewMaximumTxPower for the applicable modulation level. In AU/BU: The range is -10 dBm to the power value defined by brzaccVLNewMaximumTxPowerRange for the applicable modulation level.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.27.1.3 |
brzaccVLNewCurrentTxPowerApplicable to SU/RB with SW version 5.1 and higher. The actual transmit power in dBm for the applicable rate. Range: -17 to the maximum value defined by brzaccVLNewMaximumTxPowerRange for the applicable modulation level.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.27.1.4 |
brzaccVLNewMaximumTransmitPowerTableApplicable to SU/RB only. A table of maximum transmit power parameters. SEQUENCE OF BrzaccVLNewMaximumTransmitPowerEntry .1.3.6.1.4.1.12394.1.1.6.28 |
brzaccVLNewMaximumTransmitPowerEntryApplicable to SU/RB only. An entry in the Maximum Transmit Power Table. BrzaccVLNewMaximumTransmitPowerEntry .1.3.6.1.4.1.12394.1.1.6.28.1 |
brzaccVLNewMaxModulationLevelIdxApplicable to SU/RB only. The applicable modulation level for an entry in the NEW Maximum Transmit Power Table. This OID also represent an index of an entry in the NEW Maximum Transmit Power Table.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.28.1.1 |
brzaccVLNewDefinedMaximumTxPowerRangeApplicable to SU/RB only. The allowed range for the brzaccVLNewMaxTxPower parameter at the applicable modulation level . Range: -10 to the maximum allowed power level at the applicable modulation level , in dBm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.28.1.2 |
brzaccVLNewMaxTxPowerApplicable to SU/RB only. Read-only for units with SW version 4.0 and higher. The maximum value that can be configured for the brzaccVLNewTxPower parameter. This is also the maximum power level that can be reached by the ATPC algorithm. The range is -10 dBm to the maximum value defined by brzaccVLNewDefinedMaximumTxPowerRange for the applicable modulation level.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.6.28.1.3 |
brzaccVLNoiseFloorCalculationParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.6.29 |
brzaccVLNoiseFloorCalculationModeApplicable to all units.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.29.1 |
brzaccVLNoiseFloorForcedValueApplicable to all units. Range: -107 to -55rw INTEGER .1.3.6.1.4.1.12394.1.1.6.29.2 |
brzaccVLNoiseFloorCalibrationParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.6.30 |
brzaccVLNoiseFloorRunCalibrationNot applicable to 900 MHz units. Start calibration process for Noise Floor Indication. The unit will rest itself, will perform calibration and after that will reset again. The status of last calibration run can be read from brzaccVLNoiseFloorIndicationLastCalibrationResult. Get operation will return cancel(2); on 900 MHz units it will return na(255).rw Enumeration .1.3.6.1.4.1.12394.1.1.6.30.1 |
brzaccVLNoiseFloorFieldCalibrationStatusApplicable to all units. Defines weather the unit is currently under performing a noise floor indication calibration.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.30.2 |
brzaccVLNoiseFloorLastFieldCalibrationResultApplicable to all units. Return the status of last calibration of Noise Floor Indication that was performed.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.30.3 |
brzaccVLNoiseFloorBandwidthUsedForLastFieldCalibrationApplicable to all units. Return the bandwidth used for last successful calibration of Noise Floor Indication.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.30.4 |
brzaccVLNoiseFloorAvailableCalibrationOptionsApplicable to all units. Indicates what types of Noise Floor Indication calibration are available: notCalibrated: means that the unit is not calibrated factoryOnly: means that the unit was calibrated in factory fieldOnly: means that the unit was calibrated in field using brzaccVLNoiseFloorIndicationRunCalibration command factoryAndField: means that unit was calibrated in factory and also in fieldro Enumeration .1.3.6.1.4.1.12394.1.1.6.30.5 |
brzaccVLNoiseFloorUseCalibrationNot applicable to 900 MHz units. Select if the Noise Floor reported by the unit is using the calibration of Noise Floor Indication. The value that can be choose are according with brzaccVLNoiseFloorIndicationCalibrationAvailability.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.30.6 |
brzaccVLInterferenceMitigationParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.6.31 |
brzaccVLInterferenceMitigationChannelScanPeriodApplicable to 900 MHz units, 2.4 GHz units and BNB10. The period of time, in seconds, to stay on each channel to gather information, when performing Interference Mitigation or Spectrum Analysis. Range: 2-30 seconds.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.31.1 |
brzaccVLInterferenceMitigationAutomaticScanPeriodApplicable to 900 MHz units, 2.4 GHz units and BNB10. The period of time, in minutes, to execute automatic channel scanning, when performing Interference Mitigation. Range: 0 or 10-10080 minutes. A value of 0 means periodicity disabled, Interference Mitigation being performed only one time.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.31.2 |
brzaccVLInterferenceMitigationScanTypeApplicable to 900 MHz units, 2.4 GHz units and BNB10. The selected method for scanning, when performing Interference Mitigation.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.31.3 |
brzaccVLInterferenceMitigationScanModeApplicable to 900 MHz units, 2.4 GHz units and BNB10. The selected Optimization Criteria to choose the best result, when performing Interference Mitigation: 1 = best throughput, 2 = best distance.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.31.4 |
brzaccVLInterferenceMitigationDistanceApplicable to 900 MHz units, 2.4 GHz units and BNB10. The desired value of Maximum Distance, utilized if Optimization Criteria is set to best distance, when performing Interference Mitigation. Range: 100 - 54000 meters.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.31.5 |
brzaccVLInterferenceMitigationThroughputApplicable to 900 MHz units, 2.4 GHz units and BNB10. The desired value of Throughput, utilized if Optimization Criteria is set to best throughput, when performing Interference Mitigation. Range: 500-10000 Kbps.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.31.6 |
brzaccVLInterferenceMitigationActivationApplicable to 900 MHz units, 2.4 GHz units and BNB10. Activates Interference Mitigation, the unit is automatically reset upon activation.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.31.8 |
brzaccVLInterferenceMitigationStatusApplicable to 900 MHz units, 2.4 GHz units and BNB10. Defines whether the unit is currently performing an Interference Mitigation process. Value currentlyBlocked means unit current status prohibits Interference Mitigation activation.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.31.9 |
brzaccVLInterferenceMitigationDeleteStatisticsFileApplicable to 900 MHz units, 2.4 GHz units and BNB10. Deletes the Interference Mitigation statistics file.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.31.10 |
brzaccVLInterferenceMitigationModelApplicable to 900 MHz units, 2.4 GHz units and BNB10. Specifies the Installation Model used by the cell.rw Enumeration .1.3.6.1.4.1.12394.1.1.6.31.11 |
brzaccVLInterferenceMitigationScanTimeApplicable to 900 MHz units, 2.4 GHz units and BNB10. Displays the estimated value of the scan time.ro INTEGER .1.3.6.1.4.1.12394.1.1.6.31.12 |
brzaccVLInterferenceMitigationAUheightApplicable to 900 MHz units, 2.4 GHz units and BNB10. The Base Station height used in determining the best noise floor in the Interference Mitigation algorithm. Range: 0 - 300 meters.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.31.13 |
brzaccVLInterferenceMitigationAntennaGainApplicable to 900 MHz units, 2.4 GHz units and BNB10. The Antenna Gain of the pair unit (AU/SU), expressed in dBi. Range: 10 - 17 dBi.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.31.14 |
brzaccVLInterferenceMitigationMaxModulationApplicable to 900 MHz units, 2.4 GHz units and BNB10. The maximum modulation of the pair untit. Range: 1 - 8.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.31.15 |
brzaccVLInterferenceMitigationKeepLinkApplicable to 900 MHz AU units, 2.4 GHz AU units and BNB10. Activates the KeepLink procedure in order to not lose SUs near the border of the cellrw Enumeration .1.3.6.1.4.1.12394.1.1.6.31.16 |
brzaccVLInterferenceMitigationOutputTableApplicable to 900 MHz units, 2.4 GHz units and BNB10. A table of Clear Channel Selection or Automatic Noise Floor Selection results. SEQUENCE OF BrzaccVLInterferenceMitigationOutput .1.3.6.1.4.1.12394.1.1.6.31.17 |
brzaccVLInterferenceMitigationOutputEntryApplicable to 900 MHz units, 2.4 GHz units and BNB10. An entry in the InterferenceMitigationOutputTable. BrzaccVLInterferenceMitigationOutput .1.3.6.1.4.1.12394.1.1.6.31.17.1 |
brzaccVLInterferenceMitigationOutputFrequencyApplicable to 900 MHz units, 2.4 GHz units and BNB10. The channel frequencyro INTEGER ( 905..925 ) .1.3.6.1.4.1.12394.1.1.6.31.17.1.1 |
brzaccVLInterferenceMitigationOutputScanningTypeApplicable to 900 MHz units, 2.4 GHz units and BNB10. Type of scan that was runro Enumeration .1.3.6.1.4.1.12394.1.1.6.31.17.1.2 |
brzaccVLInterferenceMitigationOutputInstallationModelApplicable to 900 MHz units, 2.4 GHz units and BNB10. Specifies the Installation Model used by the cell.ro Enumeration .1.3.6.1.4.1.12394.1.1.6.31.17.1.3 |
brzaccVLInterferenceMitigationOutputNoiseFloorApplicable to 900 MHz units, 2.4 GHz units and BNB10. Noise floor calculated for current frequencyro INTEGER ( -102..-55 ) .1.3.6.1.4.1.12394.1.1.6.31.17.1.4 |
brzaccVLInterferenceMitigationOutputDistanceApplicable to 900 MHz units, 2.4 GHz units and BNB10. Estimated cell radiusro INTEGER .1.3.6.1.4.1.12394.1.1.6.31.17.1.5 |
brzaccVLInterferenceMitigationOutputPerformanceApplicable to 900 MHz units, 2.4 GHz units and BNB10. Estimated cell performancero INTEGER .1.3.6.1.4.1.12394.1.1.6.31.17.1.6 |
brzaccVLBeaconPeriodApplicable only to AU VL. Range: 16-160 miliseconds.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.32 |
brzaccVLMaxBeaconsLostApplicable only to AU VL. Range: 3-64.rw INTEGER .1.3.6.1.4.1.12394.1.1.6.33 |
brzaccVLServiceParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.7 |
brzaccVLMirDownlinkApplicable to SU/RB only. The Maximum Information Rate (MIR) from AU/BU to SU/RB. MIR must be above brzaccVLCirDownlink value. Range for set: 128 to 2,048 (Kbps) for SU-3 with SW version below 4.0, 128 to 3,072 (Kbps) for SU-3 with SW version 4.0 and higher, 128 to 3,968 (Kbps) for SU-6 with SW version less than 4.0, 128 to 6,016 (Kbps) for SU-6 with SW version greater than 4.0, 128 to 14,976 (Kbps) for SU-24, 128 to 53,888 (Kbps) for SU-BD and SU-54, 128 to 13,440 (Kbps) for SU-8, 128 to 6,912 (Kbps) for RB-14, 128 to 22,016 (Kbps) for RB-28, 128 to 107,904 (Kbps) for RB-100, 128 to 6,016 (Kbps) for SU-I, 128 to 12,032 (Kbps) for SU-V, 128 to 4,992 (Kbps) for RB-10, 128 to 1,024 (Kbps) for SU-1-BD The actual value (Get) will be the entered value rounded to the nearest multiple of 128 (N*128).rw INTEGER .1.3.6.1.4.1.12394.1.1.7.2 |
brzaccVLMirUplinkApplicable to SU/RB only. The Maximum Information Rate (MIR) from SU/RB to AU/BU. MIR must be above brzaccVLCirUplink value. Range for set: 128 to 2,048 (Kbps) for SU-3, 128 to 3,968 (Kbps) for SU-6 with SW version less than 4.0, 128 to 4,096 (Kbps) for SU-6 with SW version greater than 4.0, 128 to 14,976 (Kbps) for SU-24, 128 to 53,888 (Kbps) for SU-BD and SU-54, 128 to 13,440 (Kbps) for SU-8, 128 to 6,912 (Kbps) for RB-14, 128 to 22,016 (Kbps) for RB-28, 128 to 107,904 (Kbps) for RB-100, 128 to 4,096 (Kbps) for SU-I, 128 to 8,064 (Kbps) for SU-V, 128 to 4,992 (Kbps) for RB-10, 128 to 896 (Kbps) for SU-1-BD The actual value (Get) will be the entered value rounded to the nearest multiple of 128 (N*128).rw INTEGER .1.3.6.1.4.1.12394.1.1.7.3 |
brzaccVLCirDownlinkApplicable to SU only. Not applicable to BreezeNET-B products. The Committed Information Rate (CIR) from AU to SU. CIR must be below brzaccVLMirDownlink value. Range for Set: 0 to 2,048 (Kbps) for SU-3 with SW version below 4.0, 0 to 3,072 (Kbps) for SU-3 with SW version 4.0 and higher, 0 to 3,968 (Kbps) for SU-6 with SW version less than 4.0, 0 to 6,016 (Kbps) for SU-6 with SW version greater than 4.0, 0 to 14,976 (Kbps) for SU-24, 0 to 45,056 (Kbps) for SU-BD and SU-54, 0 to 11,264 (Kbps) for SU-8, 0 to 6,016 (Kbps) for SU-I, 0 to 12,032 (Kbps) for SU-V, 0 to 4,992 (Kbps) for RB-10, 0 to 1,024 (Kbps) for SU-1-BD The actual value (Get) will be the entered value rounded to the nearest multiple of 128 (N*128). BreezeNET-B products will return 65535.rw INTEGER .1.3.6.1.4.1.12394.1.1.7.4 |
brzaccVLCirUplinkApplicable to SU only. Not applicable to BreezeNET-B products. The Committed Information Rate (CIR) from SU to AU. CIR must be below brzaccVLMirUplink value. Range for Set: 0 to 2,048 (Kbps) for SU-3, 0 to 3,968 (Kbps) for SU-6 with SW version less than 4.0, 0 to 4,096 (Kbps) for SU-6 with SW version greater than 4.0, 0 to 14,976 (Kbps) for SU-24, 0 to 45,056 (Kbps) for SU-BD and SU-54, 0 to 11,264 (Kbps) for SU-8, 0 to 2,048 (Kbps) for SU-I, 0 to 8,064 (Kbps) for SU-V, 0 to 4,992 (Kbps) for RB-10, 0 to 896 (Kbps) for SU-1-BD The actual value (Get) will be the entered value rounded to the nearest multiple of 128 (N*128). BreezeNET-B products will return 65535.rw INTEGER .1.3.6.1.4.1.12394.1.1.7.5 |
brzaccVLMaxDelayApplicable to SU only. Not applicable to BreezeNET-B products. The maximal time packets may be delayed by the CIR\MIR mechanism. Above the configured maximal period the packets are discarded. Range: 300 to 10000 milliseconds. BreezeNET-B products return 65535.rw INTEGER .1.3.6.1.4.1.12394.1.1.7.6 |
brzaccVLMaxBurstDurationApplicable to all units. The maximum time during which inactivity bonus time can be accumulated for future burst transmissions. Range: 0 to 2000 milliseconds.rw INTEGER .1.3.6.1.4.1.12394.1.1.7.7 |
brzaccVLGracefulDegradationLimitApplicable to AU only. Not applicable to BreezeNET-B products. The maximum limit for activating the graceful degradation algorithm. Range: 0 to 70% rate of the CIR. BreezeNET-B products return 255.rw INTEGER .1.3.6.1.4.1.12394.1.1.7.8 |
brzaccVLMirOnlyOptionApplicable to AU only. Not applicable to BreezeNET-B products. When brzaccMirOnly is enabled, it overrides the CIR/MIR algorithm for determining actual information rate and forces the algorithm to operate with MIR parameter settings only. When enabled, the Graceful Degradation algorithm is disabled.rw Enumeration .1.3.6.1.4.1.12394.1.1.7.9 |
brzaccVLTrafficPrioritization OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.7.10 |
brzaccVLTrafficPriVLAN OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.7.10.1 |
brzaccVLVLANPriorityThresholdApplicable to all units. If the VLAN Priority's value of the frame is less than or equal to this threshold the frame will get LOW priority, otherwise the frame will get HIGH priority. Untagged frames will get LOW priorityrw INTEGER .1.3.6.1.4.1.12394.1.1.7.10.1.1 |
brzaccVLTrafficPriIPToS OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.7.10.2 |
brzaccVLToSPrioritizationOptionApplicable to all units. Disable/Enable IP ToS prioritization and choose the interpretation of the IP ToS field from IP header. ipPrecedence(2): The IP ToS field is defined by RFC791. In this case the prioritization will be done using the Precedence sub-field of IP ToS. This sub-field has 3 bits, so it can be between 0 and 7. dSCP(3): The IP ToS field is defined by RFC2474. In this case the prioritization will be done using the DSCP sub-field. The size of the sub-field is 6 bits, so the range is 0 to 63.rw Enumeration .1.3.6.1.4.1.12394.1.1.7.10.2.1 |
brzaccVLIPPrecedenceThresholdApplicable to all units. The threshold of Precedence sub-field of IP ToS field from IP Header (RFC791) to be used when the ToS Prioritization Option is set to IP Precedence. If the Precedence sub-field of a frame is less than or equal to this threshold the frame will have LOW priority, otherwise it will get HIGH priority.rw INTEGER .1.3.6.1.4.1.12394.1.1.7.10.2.2 |
brzaccVLIPDSCPThresholdApplicable to all units. The threshold of DSCP sub-field of IP ToS field from IP Header (RFC2474) to be used when ToS Prioritization Option is set to DSCP. If the DSCP sub-field of a frame is less than or equal to this threshold the frame will have LOW priority, otherwise it will get HIGH priority.rw INTEGER .1.3.6.1.4.1.12394.1.1.7.10.2.3 |
brzaccVLTrafficPriUdpTcpPortRange OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.7.10.3 |
brzaccVLUdpTcpPortRangePrioritizationOptionApplicable to all units. Disable/Enable Prioritization using UDP and/or TCP Port Ranges. udpOnly(2) : prioritization will be done only for UDP packets tcpOnly(3) : prioritization will be done only for TCP packets udpANDtcp(4): prioritization will be done for UDP and TCP packetsrw Enumeration .1.3.6.1.4.1.12394.1.1.7.10.3.1 |
brzaccVLUdpPortRangeConfig OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.7.10.3.2 |
brzaccVLUdpPortPriRTPRTCPApplicale to all units. RTP/RTCP ports prioritization option for UDP packets. rtpANDrtcp(1): RTP and RTCP packets with destination port in the defined port ranges will get HIGH priority rtpOnly(2): only RTP packets (packets with even destination port) with destination port in the defined port ranges will get HIGH priority.rw Enumeration .1.3.6.1.4.1.12394.1.1.7.10.3.2.1 |
brzaccVLUdpPortRangeNumApplicable to all units. The number of entries in the UDP Port Range Tablero INTEGER .1.3.6.1.4.1.12394.1.1.7.10.3.2.2 |
brzaccVLUdpPortRangeTableApplicable to all units. A table of UDP port ranges use for prioritization. The user can define up to 64 ranges. An entry is empty if start is 65535 and end is 0 SEQUENCE OF BrzaccVLUdpPortRangeEntry .1.3.6.1.4.1.12394.1.1.7.10.3.2.3 |
brzaccVLUdpPortRangeEntryApplicable to all units. A UDP Port Ranges Table entry. BrzaccVLUdpPortRangeEntry .1.3.6.1.4.1.12394.1.1.7.10.3.2.3.1 |
brzaccVLUdpPortRangeStartApplicable to all units. Start port of an UDP Port Rangero INTEGER .1.3.6.1.4.1.12394.1.1.7.10.3.2.3.1.1 |
brzaccVLUdpPortRangeEndApplicable to all units. End port of an UDP Port Rangero INTEGER .1.3.6.1.4.1.12394.1.1.7.10.3.2.3.1.2 |
brzaccVLUdpPortRangeIdxApplicable to all units. UDP Port Range Entry's indexro INTEGER .1.3.6.1.4.1.12394.1.1.7.10.3.2.3.1.3 |
brzaccVLUdpPortRangeAddApplicable to all units. Add port range(s) to UDP Port Ranges Table. Get operation will return the empty string. A range is defined <start>-<end> or <start> where <start> is the Start Port of the range and <end> is the End Port. If only <start> is specified the range is <start>-<start>. The value of <start> and <end> are between 0..65535. The user can add several ranges using a comma to separate between ranges. Example: 10-256,99,987-900rw DisplayString .1.3.6.1.4.1.12394.1.1.7.10.3.2.4 |
brzaccVLUdpPortRangeDeleteApplicable to all units. Delete port range(s) from UDP Port Ranges Table. Get operation will return the empty string. A range is defined <start>-<end> or <start> where <start> is the Start Port of the range and <end> is the End Port. If only <start> is specified the range is <start>-<start>. The value of <start> and <end> are between 0..65535. The user can delete several ranges using a comma to separate between ranges. Example: 10-256,99,987-900rw DisplayString .1.3.6.1.4.1.12394.1.1.7.10.3.2.5 |
brzaccVLUdpPortRangeDeleteAllApplicable to all units. Delete all entries form UDP Port Ranges Table. Get operation will return 1rw Enumeration .1.3.6.1.4.1.12394.1.1.7.10.3.2.6 |
brzaccVLTcpPortRangeConfig OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.7.10.3.3 |
brzaccVLTcpPortPriRTPRTCPApplicable to all units. RTP/RTCP ports prioritization option for TCP packets. rtpANDrtcp(1): RTP and RTCP packets with destination port in the defined port ranges will get HIGH priority rtpOnly(2): only RTP packets (packets with even destination port) with destination port in the defined port ranges will get HIGH priority.rw Enumeration .1.3.6.1.4.1.12394.1.1.7.10.3.3.1 |
brzaccVLTcpPortRangeNumApplicable to all units. The number of entries in the TCP Port Range Tablero INTEGER .1.3.6.1.4.1.12394.1.1.7.10.3.3.2 |
brzaccVLTcpPortRangeTableTable of TCP Port Ranges use for prioritization. The user can define up to 64 ranges. An entry is empty if start is 65535 and end is 0 SEQUENCE OF BrzaccVLTcpPortRangeEntry .1.3.6.1.4.1.12394.1.1.7.10.3.3.3 |
brzaccVLTcpPortRangeEntryApplicable to all units. A TCP Port Ranges Table entry. BrzaccVLTcpPortRangeEntry .1.3.6.1.4.1.12394.1.1.7.10.3.3.3.1 |
brzaccVLTcpPortRangeStartApplicable to all units. Start port of a TCP Port Rangero INTEGER .1.3.6.1.4.1.12394.1.1.7.10.3.3.3.1.1 |
brzaccVLTcpPortRangeEndApplicable to all units. End port of a TCP Port Rangero INTEGER .1.3.6.1.4.1.12394.1.1.7.10.3.3.3.1.2 |
brzaccVLTcpPortRangeIdxApplicable to all units. TCP Port Range Entry's indexro INTEGER .1.3.6.1.4.1.12394.1.1.7.10.3.3.3.1.3 |
brzaccVLTcpPortRangeAddApplicable to all units. Add port range(s) to TCP Port Ranges Table. Get operation will return the empty string. A range is defined <start>-<end> or <start> where <start> is the Start Port of the range and <end> is the End Port. If only <start> is specified the range is <start>-<start>. The value of <start> and <end> are between 0..65535. The user can add several ranges using comma to separate between ranges. Example: 10-256,99,987-900rw DisplayString .1.3.6.1.4.1.12394.1.1.7.10.3.3.4 |
brzaccVLTcpPortRangeDeleteApplicable to all units. Delete port range(s) from TCP Port Ranges Table. Get operation will return the empty string. A range is defined <start>-<end> or <start> where <start> is the Start Port of the range and <end> is the End Port. If only <start> is specified the range is <start>-<start>. The value of <start> and <end> are between 0..65535. The user can delete several ranges using comma to separate between ranges. Example: 10-256,99,987-900rw DisplayString .1.3.6.1.4.1.12394.1.1.7.10.3.3.5 |
brzaccVLTcpPortRangeDeleteAllApplicable to all units. Delete all entries form TCP Port Ranges Table Get operation will return 1rw Enumeration .1.3.6.1.4.1.12394.1.1.7.10.3.3.6 |
brzaccVLWirelessLinkPrioritization OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.7.10.4 |
brzaccVLWirelessLinkPrioritizationOptionApplicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Enable/disable the traffic prioritization over the Wireless Linkrw Enumeration .1.3.6.1.4.1.12394.1.1.7.10.4.1 |
brzaccVLlowPriorityAIFSApplicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is enabled. Define the AIFS (Arbitration Inter-frame Space) that will be used for transmitting Low Priority Trafficrw INTEGER .1.3.6.1.4.1.12394.1.1.7.10.4.2 |
brzaccVLHWRetriesHighPriorityApplicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is enabled. Defines the Maximum number of HW Retries for a unicast data packet that has High Priorityrw INTEGER .1.3.6.1.4.1.12394.1.1.7.10.4.3 |
brzaccVLHWRetriesLowPriorityApplicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is enabled. Defines the Maximum number of HW Retries for a unicast data packet that has Low Priorityrw INTEGER .1.3.6.1.4.1.12394.1.1.7.10.4.4 |
brzaccVLAUBurstDurationHighPriorityApplicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is enabled. Defines the Maximum duration of burst that can be done by AU with High Priority packets. The time is given in 250 microseconds unitsrw INTEGER .1.3.6.1.4.1.12394.1.1.7.10.4.5 |
brzaccVLAUBurstDurationLowPriorityApplicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is enabled. Defines the Maximum duration of burst that can be done by AU with Low Priority packets. The time is given in 250 microseconds unitsrw INTEGER .1.3.6.1.4.1.12394.1.1.7.10.4.6 |
brzaccVLSUBurstDurationHighPriorityApplicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is enabled. Defines the Maximum duration of burst that can be done by SU/RB with High Priority packets. The parameter is configurable in AU and the SUs/RB will learn it form AU/BU. The time is given in 250 microseconds unitsrw INTEGER .1.3.6.1.4.1.12394.1.1.7.10.4.7 |
brzaccVLSUBurstDurationLowPriorityApplicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is enabled. Defines the Maximum duration of burst that can be done by SU/RB with High Priority packets. The parameter is configurable in AU/BU and the SUs/RB will learn it from AU/BU. The time is given in 250 microseconds unitsrw INTEGER .1.3.6.1.4.1.12394.1.1.7.10.4.8 |
brzaccVLTrafficPriIpRange OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.7.10.5 |
brzaccVLTrafficPriIpRangeOptionApplicable to all units. disable(1): Disable IP Range Prioritization. ipSource(2): Prioritization of the IP protocol packets with IP source address in range defined by following two OIDs. ipDestination(3): Prioritization of the IP protocol packets with IP destination address in range defined by following two OIDs. ipSourceOrDestination(4): Prioritization of the IP protocol packets with IP source address or IP destination address in range defined by following two OIDs.rw Enumeration .1.3.6.1.4.1.12394.1.1.7.10.5.1 |
brzaccVLTrafficPriIpRangeIpAddressApplicable to all units. Defines the IP Address for the IP Range Prioritization. IP protocol packets with IP source address in range defined by Address and Mask will get High Priority.rw IpAddress .1.3.6.1.4.1.12394.1.1.7.10.5.2 |
brzaccVLTrafficPriIpRangeIpMaskApplicable to all units. Defines the IP Mask for the IP Range Prioritization. IP protocol packets with IP source address in range defined by Address and Mask will get High Priority.rw IpAddress .1.3.6.1.4.1.12394.1.1.7.10.5.3 |
brzaccVLDrap OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.7.11 |
brzaccVLDrapSupportApplicable to AU. Not applicable to BreezeNET B products Disable/Enable the DRAP featurerw Enumeration .1.3.6.1.4.1.12394.1.1.7.11.1 |
brzaccVLDrapUdpPortApplicable to AU when DRAP support is enabled. Not applicable to BreezeNET B products. The UDP port used for the DRAP serverrw INTEGER .1.3.6.1.4.1.12394.1.1.7.11.2 |
brzaccVLDrapMaxNumberOfVoiceCallsApplicable to AU when DRAP support is enabled. Not applicable to BreezeNET B products. The maximum number of voice calls that can be supported by the AUrw INTEGER .1.3.6.1.4.1.12394.1.1.7.11.3 |
brzaccVLDrapTTLApplicable to AU when DRAP support is enabled. Not applicable to BreezeNET B products. The maximum time between two allocation requestsrw INTEGER .1.3.6.1.4.1.12394.1.1.7.11.4 |
brzaccVLDrapNoOfActiveVoiceCallsApplicable to AU when DRAP support is enabled. Not applicable to BreezeNET B products. The current total number of active voice calls.ro INTEGER .1.3.6.1.4.1.12394.1.1.7.11.5 |
brzaccVLLowPriorityTrafficMinimumPercentThe minimum percent of the traffic rate that is allocated to the low priority trafficrw INTEGER .1.3.6.1.4.1.12394.1.1.7.12 |
brzaccVLSUEZMirDownlinkApplicable to AU only. The Maximum Information Rate (MIR) from AU to SU-EZ. Range for set: 128 to 12,032 (Kbps). The actual value (Get) will be the entered value rounded to the nearest multiple of 128 (N*128). This parameter is not runtime. The SU-EZ must be re-associated in order to re-apply this parameter.rw INTEGER .1.3.6.1.4.1.12394.1.1.7.13 |
brzaccVLMIRThresholdPercentApplicable to AU only. MIR Threshold Percentrw INTEGER .1.3.6.1.4.1.12394.1.1.7.14 |
brzaccVLProportionalIRParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.7.15 |
brzaccVLProportionalIRFactorApplicable to SU only. Proportional IR Factor (percentage). The weight used for computing the used MIR/CIR values.rw INTEGER .1.3.6.1.4.1.12394.1.1.7.15.1 |
brzaccVLProportionalIRUpdatePeriodApplicable to SU only. The period of time (in minutes) for periodical computation of used MIR/CIR values.rw INTEGER .1.3.6.1.4.1.12394.1.1.7.15.2 |
brzaccVLProportionalIRThresholdPercentageApplicable to SU only. When the difference between two consecutive calculations of used MIR/CIR value is bigger than this percentage from value, the new computed MIR/CIR values will be considered.rw INTEGER .1.3.6.1.4.1.12394.1.1.7.15.3 |
brzaccVLProportionalIRThresholdRateApplicable to SU only. The new computed MIR/CIR values will be considered only when the rate, on uplink or downlink respectively, is lower than the rate corresponding to this threshold rate.rw INTEGER .1.3.6.1.4.1.12394.1.1.7.15.4 |
brzaccVLUserFilterParams OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.8 |
brzaccVLUserFilterOptionApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. Defines user-filtering options. disable: No filtering. iPOnly: Only IP protocol frames pass. userDefinedAddrOnly: Only ip frames to/from user defined IP addresses pass. pPPoE Only: Only PPPoE frames pass. This option is not applicable for AUrw Enumeration .1.3.6.1.4.1.12394.1.1.8.1 |
brzaccVLIpFilterTableStarting with version 5.0, this is deprecated. Use brzaccVLNewIpFilterTable instead. Applicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP Filter Table of up to 8 user defined addresses, or address groups, to be used if the selected User Filtering option is userDefinedAddrOnly. SEQUENCE OF BrzaccVLIpFilterEntry .1.3.6.1.4.1.12394.1.1.8.2 |
brzaccVLIpFilterEntryApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP Filter Table entry. BrzaccVLIpFilterEntry .1.3.6.1.4.1.12394.1.1.8.2.1 |
brzaccVLIpIDApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP address of an IP Filter Table entry.rw IpAddress .1.3.6.1.4.1.12394.1.1.8.2.1.1 |
brzaccVLMaskIDApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP Mask of an IP Filter Table entry. Either a mask or a range, but not both can be used to define an address group. If the range is other than 0, than the mask is ignored and only the range value is used to define the address group.rw IpAddress .1.3.6.1.4.1.12394.1.1.8.2.1.2 |
brzaccVLIpFilterRangeApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. An addresses range for the IP Filter Table entry. The first address in the range is the IP address. 0 means that the range is not used. Either a mask or a range, but not both can be used to define an address group. If the range is other than 0, than the mask is ignored and only the range value is used to define the address group. Range: 0 to 255.rw INTEGER .1.3.6.1.4.1.12394.1.1.8.2.1.3 |
brzaccVLIpFilterIdxApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. A table index for the IP Filter Table entry.ro INTEGER .1.3.6.1.4.1.12394.1.1.8.2.1.4 |
brzaccVLDeleteOneUserFilterApplicable to SU/RB and AU-EZ only. Deletes a single selected entry from the IP Filter Table.rw Enumeration .1.3.6.1.4.1.12394.1.1.8.3 |
brzaccVLDeleteAllUserFiltersApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. Deletes all entries from the IP Filter Table.rw Enumeration .1.3.6.1.4.1.12394.1.1.8.4 |
brzaccVLDHCPUnicastOverrideFilterApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. Enables or disables the unicast DHCP messages, overriding the IP Filtering option.rw Enumeration .1.3.6.1.4.1.12394.1.1.8.5 |
brzaccVLNewIpFilterTableApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP Filter Table of up to 8 user defined addresses, or address groups, to be used if the selected User Filtering option is userDefinedAddrOnly. SEQUENCE OF BrzaccVLNewIpFilterEntry .1.3.6.1.4.1.12394.1.1.8.6 |
brzaccVLNewIpFilterEntryApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP Filter Table entry. BrzaccVLNewIpFilterEntry .1.3.6.1.4.1.12394.1.1.8.6.1 |
brzaccVLNewIpIDApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP address of an IP Filter Table entry.ro IpAddress .1.3.6.1.4.1.12394.1.1.8.6.1.1 |
brzaccVLNewMaskIDApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP Mask of an IP Filter Table entry. Either a mask or a range, but not both can be used to define an address group. If the range is other than 0, than the mask is ignored and only the range value is used to define the address group.rw IpAddress .1.3.6.1.4.1.12394.1.1.8.6.1.2 |
brzaccVLNewIpFilterRangeApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. An addresses range for the IP Filter Table entry. The first address in the range is the IP address. 0 means that the range is not used. Either a mask or a range, but not both can be used to define an address group. If the range is other than 0, than the mask is ignored and only the range value is used to define the address group. Range: 0 to 255.rw INTEGER .1.3.6.1.4.1.12394.1.1.8.6.1.3 |
brzaccVLNewIpFilterCommandApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. Supports only active(1), createAndGo(4) and destroy(6). A command for the IP Filter Table entry.rw Enumeration .1.3.6.1.4.1.12394.1.1.8.6.1.4 |
brzaccVLDHCPPPPoEOverrideFilterApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. Enables or disables the PPPoE messages, overriding the IP Filtering option.rw Enumeration .1.3.6.1.4.1.12394.1.1.8.7 |
brzaccVLSecurityParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.9 |
brzaccVLAuthenticationAlgorithmApplicable to all units. Enables/disables the authentication encryption option. openSystem: Authentication messages are not encrypted. sharedKey : Authentication messages are encryptedrw Enumeration .1.3.6.1.4.1.12394.1.1.9.1 |
brzaccVLSUDefaultKeyIDApplicable to SU/RB only. The key to be used for encryption of authentication messages and/or data. Range: 1 to 4.rw INTEGER .1.3.6.1.4.1.12394.1.1.9.2 |
brzaccVLDataEncryptionOptionApplicable to all units. Enables/disables the data encryption option.rw Enumeration .1.3.6.1.4.1.12394.1.1.9.3 |
brzaccVLAUDefaultMulticastKeyIDApplicable to AU/BU only. The key to be used for encryption of multicasts and broadcasts.rw INTEGER .1.3.6.1.4.1.12394.1.1.9.4 |
brzaccVLSecurityModeApplicable to all units. The fips197 option is applicable only to units with a license to use FIPS 197 algorithm. The encryption algorithm to be used for authentication messages and/or data encryption. The aesOCB option is not applicable for AU-EZ.rw Enumeration .1.3.6.1.4.1.12394.1.1.9.5 |
brzaccVLAuthenticationPromiscuousModeApplicable to AU/BU only. Enables/disable the promiscuous mode allowing authentication of and communication with all SUs/RB regardless of their security parameters.rw Enumeration .1.3.6.1.4.1.12394.1.1.9.6 |
brzaccVLKey1Applicable to all units. Key number 1. Accessible only with SNMP Write Community String (administrator password). Valid values: 32 hexadecimal digits.rw DisplayString .1.3.6.1.4.1.12394.1.1.9.7 |
brzaccVLKey2Applicable to all units. Key number 2. Accessible only with SNMP Write Community String (administrator password). Valid values: 32 hexadecimal digits.rw DisplayString .1.3.6.1.4.1.12394.1.1.9.8 |
brzaccVLKey3Applicable to all units. Key number 3. Accessible only with SNMP Write Community String (administrator password). Valid values: 32 hexadecimal digits.rw DisplayString .1.3.6.1.4.1.12394.1.1.9.9 |
brzaccVLKey4Applicable to all units. Key number 4. Accessible only with SNMP Write Community String (administrator password). Valid values: 32 hexadecimal digits.rw DisplayString .1.3.6.1.4.1.12394.1.1.9.10 |
brzaccVLSecurityModeSupportApplicable to all units. Returns types of encryption that are supported. 0 - no encryption 1 - WEP 2 - AES OCB 3 - WEP and AES OCB 4 - FIPS-197 5 - FIPS-197 and WEP 6 - FIPS-197 and AES OCB 7 - FIPS-197, AES OCB and WEPro INTEGER .1.3.6.1.4.1.12394.1.1.9.12 |
brzaccVLPerformanceParams OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.10 |
brzaccVLRTSThresholdApplicable to SU and AU. Not applicable to BreezeNET-B products. The minimum frame size that requires an RTS/CTS handshake. Range: For units bearing SW version 3.0 and above: 20 to 3400 bytes, for previous SW versions 20 to 1600 bytes. BreezeNET-B products return 65535.rw INTEGER .1.3.6.1.4.1.12394.1.1.10.1 |
brzaccVLMinContentionWindowApplicable to SU and AU. For units bearing SW version 4.0 and above applicable to BreezeNET-B products, for previous SW versions not applicable to BreezeNET-B products. The initial value to be used by the contention window calculation algorithm. Value must be 0 or power of 2 minus 1 (7,15,31...). Range: 0 to 1023, excluding 1 and 3. BreezeNET-B products with SW version below 4.0 return 65535.rw INTEGER .1.3.6.1.4.1.12394.1.1.10.3 |
brzaccVLMaxContentionWindowApplicable to SU and AU. For units bearing SW version 4.0 and above applicable to BreezeNET-B products, for previous SW versions not applicable to BreezeNET-B products. The maximum value to be used by the contention window calculation algorithm. Value must be power of 2 minus 1 (7,15,31...) Range: 7 to 1023.rw INTEGER .1.3.6.1.4.1.12394.1.1.10.4 |
brzaccVLMaximumModulationLevelApplicable to all units. If the Adaptive Modulation algorithm is enabled, it sets the Maximum Modulation Level to be used. If The Modulation algorithm is disabled, it sets the Fixed Modulation Level to be used. The range is 1 to 8. 8 is not applicable for units with HW revision A.rw Enumeration .1.3.6.1.4.1.12394.1.1.10.5 |
brzaccVLMulticastModulationLevelApplicable to AU/BU only. The modulation level for multicast and broadcast data frames. The range is 1 to 8. 8 is not applicable for units with HW revision A.rw Enumeration .1.3.6.1.4.1.12394.1.1.10.6 |
brzaccVLAvgSNRMemoryFactorApplicable to all units. The weight of history in average SNR calculation. The higher is the value, the higher is the weight of history. Range: -1 (Disregard History) to 32.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.10.7 |
brzaccVLHardwareRetriesApplicable to all units. Not applicable if Wireless Link Prioritization is enabled. The maximum number of trials to transmit an unacknowledged frame in each Hardware Retrial phase. Range : 1 to 14.rw INTEGER .1.3.6.1.4.1.12394.1.1.10.8 |
brzaccVLAdaptiveModulationParams OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.10.9 |
brzaccVLAdaptiveModulationAlgorithmOptionApplicable to all units. Enables/disables the adaptive modulation level decision mechanism.rw Enumeration .1.3.6.1.4.1.12394.1.1.10.9.1 |
brzaccVLSoftwareRetrySupportApplicable to all units. Read-only for units with version 2.0. Not applicable for units with SW version 3.0 and higher. The status of the Software Retry mechanism. Enabled when the Adaptive Modulation algorithm is enabled and the Burst Mode Option is disabled. Otherwise it is disabled.rw Enumeration .1.3.6.1.4.1.12394.1.1.10.9.2 |
brzaccVLNumOfSoftwareRetriesApplicable to all units. Read-only for units with version 2.0. Not applicable for units with SW version 3.0 and higher. The maximum number of times to use the Software Retry mechanism when it is enabled.rw Enumeration .1.3.6.1.4.1.12394.1.1.10.9.3 |
brzaccVLMinIntervalBetweenAdaptiveModulationAlgorithmMessagesApplicable all units. The minimum interval between two consecutive AU/BU to SU/RB messages. Range: 1 to 3600 (Sec).rw INTEGER .1.3.6.1.4.1.12394.1.1.10.9.4 |
brzaccVLAdaptiveModulationDecisionThresholdsApplicable to all units. Defines the setting of thresholds for the rate decision algorithm. high (2) should typically be used when the SNR is lower than 13dB.rw Enumeration .1.3.6.1.4.1.12394.1.1.10.9.5 |
brzaccVLAdaptiveModulationHistorySizeApplicable to all units with HW version C or higher. This value is used to compute the transmission time. Not used in version 6.0 and higher.rw INTEGER .1.3.6.1.4.1.12394.1.1.10.9.7 |
brzaccVLAdaptiveModulationPacketThresholdToTestUpRateApplicable to all units with HW version C or higher. When the number of transmitted frames exceeds this number the upper modulations will be tested.rw INTEGER .1.3.6.1.4.1.12394.1.1.10.9.8 |
brzaccVLAdaptiveModulationPacketNoOnUpperRateApplicable to all units with HW version C or higher. The number of frames used on upper modulations.rw INTEGER .1.3.6.1.4.1.12394.1.1.10.9.9 |
brzaccVLAdaptiveModulationAlgorithmApplicable to all units with HW version C or higher. Defines the adaptive modulation algorithm used by the unit.rw Enumeration .1.3.6.1.4.1.12394.1.1.10.9.10 |
brzaccVLAdaptiveModulationRetriesOnLowerModulationsApplicable to all units with HW version C or higher. It allows retransmissions at lower modulation levels.rw Enumeration .1.3.6.1.4.1.12394.1.1.10.9.11 |
brzaccVLAdaptiveModulationRTSDurationModeApplicable to all units with HW version C or higher. It defines the mode to calculate the value for RTS duration field.rw Enumeration .1.3.6.1.4.1.12394.1.1.10.9.12 |
brzaccVLBurstMode OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.10.10 |
brzaccVLBurstModeOptionApplicable to all units. Applicable only if Burst Mode Option is supported by country specific parameters of the Sub Band. Not applicable if Wireless Link Prioritization is enabled. Enables/disable burst mode operation. In SU/RB with HW Revision B or lower blocked(3) value is returned when Security Mode is Wep , Data Encryption Option is Enabled and Burst option is Enabled. In AU/BU with HW Revision B or lower blocked(3) value is returned when Dfs Option is Enabled and Burst mode is enabled.rw Enumeration .1.3.6.1.4.1.12394.1.1.10.10.1 |
brzaccVLBurstIntervalApplicable to all units. Not applicable if Wireless Link Prioritization is enabled. Burst mode interval in milliseconds. Range: 1 to the maximum value as defined in the country specific parameters of the Sub Band (milliseconds).rw INTEGER .1.3.6.1.4.1.12394.1.1.10.10.2 |
brzaccVLConcatenationParameters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.10.11 |
brzaccVLConcatenationOptionApplicable to all units. Defines the Concatenation option.rw Enumeration .1.3.6.1.4.1.12394.1.1.10.11.1 |
brzaccVLConcatenationMaximumNumberOfFramesApplicable to all units with SW version 3.X . Not applicable for version 4.0 and higher. Defines the maximum numbers of frames that can be concatenated. Range:2 to 8 (frames).rw INTEGER .1.3.6.1.4.1.12394.1.1.10.11.2 |
brzaccVLConcatenationMaxFrameSizeApplicable to all units. Defines the maximum size of a concatenated frame. Range: 256 to 2200 (bytes) for BreezeNET-B products BU/RB14 BU/RB28, or for AU/SU with HW revision A or B. 256 to 4032 (bytes) for AU/SU with HW Revision C or higher, BreezeNET-B products BU/RB100 and BreezeNET-B products BU/RB10.rw INTEGER .1.3.6.1.4.1.12394.1.1.10.11.3 |
brzaccVLControlModulationLevelApplicable to all units wits software version 6.0 and higher. The modulation level for control frames. basicRates(1) means the all control frames will be sent at basic rate and modulationLevel1(2) means the all control frames will be sent at modulation level 1rw Enumeration .1.3.6.1.4.1.12394.1.1.10.13 |
brzaccVLEthernetFrameSizeApplicable only for BNB-10 products. The maximum frame size used on Ethernet port.rw Enumeration .1.3.6.1.4.1.12394.1.1.10.14 |
brzaccVLRunningEthernetFrameSizeApplicable only for BNB-10 products. The frame size used on Ethernet port.ro INTEGER .1.3.6.1.4.1.12394.1.1.10.15 |
brzaccVLSiteSurvey OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.11 |
brzaccVLAverageReceiveSNRApplicable to SU/RB only. The average Signal to Noise Ratio of received frames.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.1 |
brzaccVLTrafficStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.11.2 |
brzaccVLResetTrafficCountersApplicable to all units. Resets the traffic counters.rw Enumeration .1.3.6.1.4.1.12394.1.1.11.2.1 |
brzaccVLEthCounters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.11.2.2 |
brzaccVLTotalRxFramesViaEthernetApplicable to all units. Total number of frames received via the Ethernet port.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.2.1 |
brzaccVLTxWirelessToEthernetApplicable to all units. Total number of frames transmitted to the Ethernet port.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.2.2 |
brzaccVLWirelessLinkCounters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.11.2.3 |
brzaccVLTxFramesToWireless OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.11.2.3.1 |
brzaccVLAUBeaconsToWirelessApplicable to AU/BU only. The number of beacons transmitted to the wireless media.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.1.1 |
brzaccVLDataAndOtherMngFramesToWirelessApplicable to AU/BU only. The number of data and management frames transmitted to the wireless media. The count includes one count for each data frame transmitted successfully (excluding retransmissions).ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.1.3 |
brzaccVLTotalTxFramesToWirelessApplicable to all units. The number of frames transmitted to the wireless media. The count includes one count for each data frame that was transmitted successfully (excluding retransmissions), and also the number of transmitted control and management frames, including beacons.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.1.4 |
brzaccVLTotalTransmittedUnicastsApplicable to AU/BU only. The total number of unicast frames successfully transmitted to the wireless media, excluding retransmissions.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.1.5 |
brzaccVLTotalTransmittedConcatenatedFramesDoubleApplicable to all products. The total number of double concatenated frames successfully transmitted to the wireless media, excluding retransmissions.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.1.6 |
brzaccVLTotalTransmittedConcatenatedFramesSingleApplicable to all products. The total number of double concatenated frames successfully transmitted to the wireless media, excluding retransmissions.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.1.7 |
brzaccVLTotalTransmittedConcatenatedFramesMoreApplicable to all products. The total number of concatenated frames with more then two frames successfully transmitted to the wireless media, excluding retransmissions.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.1.8 |
brzaccVLTotalRxFramesFromWirelessApplicable to all units. The total number of frames that were received from the wireless media. The count includes data and control and management frames, including beacons received from the AU/BU. The count does not include frames that were discarded internally, bad frames and duplicate frames.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.2 |
brzaccVLTotalRetransmittedFramesApplicable to all units. The total number of retransmissions of data frames (counts all unsuccessful transmissions/retransmissions).ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.3 |
brzaccVLFramesDroppedApplicable to all units. The number of dropped frames. The frames that were retransmitted to the extent of the maximum allowed number of retransmissions without being acknowledged..ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.4 |
brzaccVLDataFramesSubmittedToBridge OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.11.2.3.5 |
brzaccVLFramesSubmittedViaHighQueueApplicable to all units. Frames submitted to the internal bridge via the High priority queue. for transmission to the wireless media.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.5.1 |
brzaccVLFramesSubmittedViaMidQueueApplicable to all units. Frames submitted to the internal bridge via the Mid priority queue for transmission to the wireless media.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.5.2 |
brzaccVLFramesSubmittedViaLowQueueApplicable to all units. Frames submitted to the internal bridge via the Low priority queue for transmission to the wireless media.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.5.3 |
brzaccVLTotalNoOfDataFramesSubmittedApplicable to all units. The total number of data frames submitted to the internal bridge for transmission to the wireless media.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.5.4 |
brzaccVLTotalRecievedDataFramesApplicable to all units. The total number of data frames received from the wireless media, including duplicate frames.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.6 |
brzaccVLRecievedBadFramesApplicable to all units. The number of frames received from the wireless media with errors (CRC errors).ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.7 |
brzaccVLNoOfDuplicateFramesDiscardedApplicable to all units. The number of frames discarded due to receiving multiple copies.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.8 |
brzaccVLNoOfInternallyDiscardedMirCirApplicable to all units. The number of data frames received from the Ethernet port that were discarded by the MIR/CIR mechanism either to avoid exceeding the maximum allowed information rate, or when the wireless link conditions do not enable reaching the allowed rate.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.9 |
brzaccVLTotalRxConcatenatedFramesDoubleApplicable to all units. The total number of double concatenated frames received from the wireless media, including duplicate frames.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.10 |
brzaccVLTotalRxConcatenatedFramesSingleApplicable to all units. The total number of data fast frames single concatenated frames received from the wireless media, including duplicate frames.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.11 |
brzaccVLTotalRxConcatenatedFramesMoreApplicable to all units. The total number of data fast frames concatenated with more then two frames received from the wireless media, including duplicate frames.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.12 |
brzaccVLTXRetransmissionPercentageApplicable to all units. Indicates the percentage of frames that have been retransmitted.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.13 |
brzaccVLRXCRCPercentageApplicable to all units. Indicates the percentage of received frames with CRC error.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.3.14 |
brzaccVLWirelessLinkEvents OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.11.2.4 |
brzaccVLTxEvents OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.11.2.4.1 |
brzaccVLDroppedFrameEventsApplicable to all units. The number of frames that were dropped because they were retransmitted to the maximum allowed number of retransmissions without being acknowledged.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.4.1.1 |
brzaccVLFramesDelayedDueToSwRetryApplicable to all units. Not applicable for units with SW Version 3.0 and higher. The number of frames that were delayed because the SW retry algorithm was activated on a previous frame designated for the same recipient.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.4.1.2 |
brzaccVLUnderrunEventsApplicable to all units. The number of frames whose transmission was aborted because the rate of submitting frames for transmission exceeded the available transmission capability.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.4.1.3 |
brzaccVLOthersTxEventsApplicable to all units. The number of Tx events due to problems other than those of the other Tx Events counters.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.4.1.4 |
brzaccVLTotalTxEventsApplicable to all units. The total number of Tx special events.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.4.1.5 |
brzaccVLRxEvents OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.11.2.4.2 |
brzaccVLPhyErrorsApplicable to all units, only when DFS is enabled. The number of unidentified signals.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.4.2.1 |
brzaccVLCRCErrorsApplicable to all units. The number of frames received from the wireless media containing CRC errors.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.4.2.2 |
brzaccVLOverrunEventsApplicable to all units. The number of frames that were discarded because the receive rate exceeded the processing capability or the capacity of the Ethernet port.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.4.2.3 |
brzaccVLRxDecryptEventsApplicable to all units. The number of frames that were not received properly due to a problem in the data decryption mechanism.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.4.2.4 |
brzaccVLTotalRxEventsApplicable to all units. The total number of Rx special events.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.4.2.5 |
brzaccVLPerModulationLevelCounters OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.11.2.5 |
brzaccVLResetPerModulationLevelCountersApplicable to all units. Resets the per-Modulation Level counters .rw Enumeration .1.3.6.1.4.1.12394.1.1.11.2.5.1 |
brzaccVLSUPerModulationLevelCountersTableApplicable to SU/RB. Per Rate Counters table. SEQUENCE OF BrzaccVLSUPerModulationLevelCountersEntry .1.3.6.1.4.1.12394.1.1.11.2.5.2 |
brzaccVLSUPerModulationLevelCountersEntryApplicable to SU/RB. An entry in the Per modulation Counters table. BrzaccVLSUPerModulationLevelCountersEntry .1.3.6.1.4.1.12394.1.1.11.2.5.2.1 |
brzaccVLSUPerModulationLevelCountersTableIdxApplicable to SU/RB. An index of an entry in the Per modulation level Counters table.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.2.5.2.1.1 |
brzaccVLSUPerModulationLevelCountersApplicableModLevelApplicable to SU/RB. The applicable modulation level of the entry in the Per modulation level Counters table. Modulation Level 8 is not applicable for units with HW revision A.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.2.5.2.1.2 |
brzaccVLSUPerModulationLevelCountersTxSuccessApplicable to SU/RB. The total number of successfully transmitted unicasts at the applicable modulation level.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.5.2.1.3 |
brzaccVLSUPerModulationLevelCountersTxFailedApplicable to SU/RB. The total number of dropped frames at the applicable Modulation Level.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.2.5.2.1.4 |
brzaccVLAverageModulationLevelApplicable to SU/RB. The average modulation level for successful transmission (rounded to nearest integer) since last reset of the Per Modulation Level counters. Range: 1 to 8.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.2.5.3 |
brzaccVLMacAddressDatabase OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.11.5 |
brzaccVLAUMacAddressDatabase OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.11.5.1 |
brzaccVLAUAdbResetAllModulationLevelCountersApplicable to AU/BU only. To reset all the counters for all SUs/RB in the MAC Address Database.rw Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.1 |
brzaccVLAUAdbTableApplicable to AU/BU only. AU/BU MAC Address Database table. SEQUENCE OF BrzaccVLAUAdbEntry .1.3.6.1.4.1.12394.1.1.11.5.1.2 |
brzaccVLAUAdbEntryApplicable to AU/BU only. An entry in the AU/BU MAC Address Database table. BrzaccVLAUAdbEntry .1.3.6.1.4.1.12394.1.1.11.5.1.2.1 |
brzaccVLAdbIndexApplicable to AU/BU only. The index of an entry in the AU/BU MAC Address Database table.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.1 |
brzaccVLAdbMacAddressApplicable to AU/BU only. The MAC Address of an SU/RB entry in the MAC Address Database table.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.2 |
brzaccVLAdbStatusApplicable to AU/BU only. The status of the relevant SU/RB.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.3 |
brzaccVLAdbSwVersionApplicable to AU/BU only. The SW version of the relevant SU/RB. Not available for SU-EZ.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.4 |
brzaccVLAdbSNRApplicable to AU/BU only. The average Signal to Noise Ratio in dB of frames received by the AU/BU from the relevant SU/RB.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.5 |
brzaccVLAdbMaxModulationLevelApplicable to AU/BU only. The value configured in the relevant SU/RB for the Maximum Modulation Level parameter. Modulation Level 8 is not applicable for units with HW revision A. It is not applicable for SU-EZ and it returns na.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.6 |
brzaccVLAdbTxFramesTotalApplicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.7 |
brzaccVLAdbDroppedFramesTotalApplicable to AU/BU only. Counts the total number of frames intended to the SU/RB that were dropped because they were retransmitted to the extent of the maximum allowed number of retransmissions without being acknowledged.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.8 |
brzaccVLAdbTxSuccessModLevel1Applicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 1.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.9 |
brzaccVLAdbTxSuccessModLevel2Applicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 2.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.10 |
brzaccVLAdbTxSuccessModLevel3Applicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/BU over the wireless link using modulation level 3.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.11 |
brzaccVLAdbTxSuccessModLevel4Applicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 4.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.12 |
brzaccVLAdbTxSuccessModLevel5Applicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 5.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.13 |
brzaccVLAdbTxSuccessModLevel6Applicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/BU over the wireless link using modulation level 6.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.14 |
brzaccVLAdbTxSuccessModLevel7Applicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 7.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.15 |
brzaccVLAdbTxSuccessModLevel8Applicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 8. Not applicable for units with HW revision A.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.16 |
brzaccVLAdbTxFailedModLevel1Applicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 1.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.17 |
brzaccVLAdbTxFailedModLevel2Applicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 2.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.18 |
brzaccVLAdbTxFailedModLevel3Applicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 3.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.19 |
brzaccVLAdbTxFailedModLevel4Applicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 4.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.20 |
brzaccVLAdbTxFailedModLevel5Applicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 5.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.21 |
brzaccVLAdbTxFailedModLevel6Applicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 6.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.22 |
brzaccVLAdbTxFailedModLevel7Applicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 7.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.23 |
brzaccVLAdbTxFailedModLevel8Applicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 8. Not applicable for units with HW revision A.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.24 |
brzaccVLAdbCirTxApplicable to AU Only. Not applicable to BreezeNET-B products. This parameter is not relevant for SU-EZ with SW 1.00.15 and it is 0. The value configured in the relevant SU for the CIR: SU to AU parameter.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.25 |
brzaccVLAdbMirTxApplicable to AU/BU only. The value configured in the relevant SU/RB for the MIR: SU/RB to AU/BU parameter. For SU-EZ SW version 1.00.15, it represents the value set in AU-EZ.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.26 |
brzaccVLAdbCirRxApplicable to AU Only. Not applicable to BreezeNET-B products. This parameter is not relevant for SU-EZ with SW version 1.00.15 and it is 0. The value configured in the relevant SU for the CIR: AU to SU parameter.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.27 |
brzaccVLAdbMirRxApplicable to AU/BU only. This parameter is not relevant for SU-EZ with SW version 1.00.15 and it is 0. The value configured in the relevant SU/RB for the MIR: AU/BU to SU/RB parameter.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.28 |
brzaccVLAdbCirMaxDelayApplicable to AU Only. Not applicable to BreezeNET-B products. The value configured in the relevant SU for the CIR Maximum Delay parameter. It returns maximum value on 32 bits for SU-EZ with SW version 1.00.15 and this means NA (Not Available).ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.29 |
brzaccVLAdbDistanceApplicable to AU/BU Only. The distance between the SU/RB and the AU/BU (In Kilometers). It is not applicable for SU-EZ and it returns 0.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.30 |
brzaccVLAdbHwRevisionApplicable to AU/BU Only. The SU/RB HW Revision. Not available for SU-EZ.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.31 |
brzaccVLAdbCpldVerApplicable to AU/BU Only. The SU/RB CPLD Version. Not available for SU-EZ.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.32 |
brzaccVLAdbCountryCodeApplicable to AU/BU Only. The SU/RB country code. 9999 means unavailable country code.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.33 |
brzaccVLAdbBootVerApplicable to AU/BU Only. The SU/RB Boot Version. Not available for SU-EZ.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.34 |
brzaccVLAdbAtpcOptionApplicable to AU/BU Only. The SU/RB ATPC option configuration.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.35 |
brzaccVLAdbAdapModOptionApplicable to AU/BU Only. The SU/RB adaptive modulation option configuration. It is not applicable for SU-EZ.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.36 |
brzaccVLAdbBurstModeOptionApplicable to AU/BU Only. The SU/RB burst mode option configuration. It is not applicable for SU-EZ.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.37 |
brzaccVLAdbConcatenationOptionApplicable to AU/BU Only. The SU/RB concatenation option configuration. It is not applicable for SU-EZ.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.39 |
brzaccVLAdbSecurityModeApplicable to AU/BU Only. The SU/RB security mode configuration. Not available for SU-EZ.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.41 |
brzaccVLAdbAuthOptionApplicable to AU/BU Only. The SU/RB authentication algorithm configuration. Not available for SU-EZ.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.42 |
brzaccVLAdbDataEncyptOptionApplicable to AU/BU Only. The SU/RB data encryption option configuration. Not available for SU-EZ.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.43 |
brzaccVLAdbAgeApplicable to AU/BU only. The time since any packet was received from the relevant SU/RB.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.44 |
brzaccVLAdbUnitNameApplicable to AU/BU only. The unit name of the relevant SU/RB. Not available for SU-EZ.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.45 |
brzaccVLAdbRSSIApplicable to AU/BU only with SW version 5.1 and higher. The average Received Signal Strength Indication of frames received by the AU/BU from the relevant SU/RB. This value is given in dBm units.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.46 |
brzaccVLAdbIpAddressApplicable to AU/BU only with SW version 5.2.11 and higher. The Running IP address of the relevant SU/RB. Not available for SU-EZ with SW version lower than 1.1.1ro IpAddress .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.47 |
brzaccVLAUNewAdbTableApplicable to AU/BU only with SW version 5.0 and higher. AU/BU MAC Address New Database table idexed by MAC Address SEQUENCE OF BrzaccVLAUNewAdbEntry .1.3.6.1.4.1.12394.1.1.11.5.1.3 |
brzaccVLAUNewAdbEntryApplicable to AU/BU only with SW version 5.0 and higher. An entry in the AU/BU MAC Address New Database table. BrzaccVLAUNewAdbEntry .1.3.6.1.4.1.12394.1.1.11.5.1.3.1 |
brzaccVLNewAdbMacAddressApplicable to AU/BU only with SW version 5.0 and higher. The MAC Address of an SU/RB entry in the MAC Address Database table.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.1 |
brzaccVLNewAdbIPaddressApplicable to AU/BU only with SW version 5.0 and higher. The Running IP address of the relevant SU/RB. Not available for SU-EZ with SW version lower than 1.1.1ro IpAddress .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.2 |
brzaccVLNewAdbUnitNameApplicable to AU/BU only with SW version 5.0 and higher. The unit name of the relevant SU/RB. Not available for SU-EZ.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.3 |
brzaccVLNewAdbUnitTypeApplicable to AU/BU only with SW version 5.0 and higher. The type of the relevant SU/RB. su-6-1D (3) : SU-6-1D (subscriber unit supporting 6 Mbps) Starting with 5.0 this is deprecated. When a SU-6-1D is upgraded to 5.0, its type will be changed to SU-6-BD. su-6-BD (4) : SU-6-BD (subscriber unit supporting 6 Mbps). su-24-BD (5) : SU-24-BD (subscriber unit supporting 24 Mbps). rb-B14 (8) : RB-B14 (BreezeNET Remote Bridge supporting 14 Mbps). rb-B28 (9) : RB-B28 (BreezeNET Remote Bridge supporting 28 Mbps). su-BD (10) : SU-BD (subscriber unit). su-54-BD(11) : SU-54-BD (subscriber unit supporting 54 Mbps). su-3-1D (12) : SU-3-1D (subscriber unit supporting 3 Mbps). Starting with 5.0 this is deprecated. When a SU-3-1D is upgraded to 5.0, its type will be changed to SU-3-BD. su-3-4D (13) : SU-3-4D (subscriber unit supporting 3 Mbps). Starting with 5.0 SW version this unit will work in BD mode suBD4900(18) : SU-BD-4900 (BreezeAccess 4900 subscriber unit) rb-B100 (20) : BU-B100 (BreezeNET Remote Bridge unlimited throughput) su-I (21) : SU-I su-EZ (23) : SU-EZ su-8-BD (27) : SU-8-BD (subscriber unit supporting 8 Mbps). su-1-BD (28) : SU-1-BD (subscriber unit supporting 1 Mbps). su-3-L (29) : SU-3-L (subscriber unit supporting 3 Mbps). su-6-L (30) : SU-6-L (subscriber unit supporting 6 Mbps). su-12-L (31) : SU-12-L (subscriber unit supporting 12 Mbps). su (33) : SU (security subscriber unit) na (255) : Not Availablero Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.4 |
brzaccVLNewAdbSwVersionApplicable to AU/BU only with SW version 5.0 and higher. The SW version of the relevant SU/RB. Not available for SU-EZ.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.5 |
brzaccVLNewAdbHwRevisionApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB HW Revision. Not available for SU-EZ.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.6 |
brzaccVLNewAdbCpldVerApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB CPLD Version. Not available for SU-EZ.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.7 |
brzaccVLNewAdbBootVerApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB Boot Version. Not available for SU-EZ.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.8 |
brzaccVLNewAdbCountryCodeApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB country code. 9999 means unavailable country codero INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.9 |
brzaccVLNewAdbCirTxApplicable to AU/BU only with SW version 5.0 and higher. For BreezeNET-B products it is 0. For SU_EZ with SW version 1.00.15 is not relevant and it is 0. The value configured in the relevant SU for the CIR: SU to AU parameter.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.10 |
brzaccVLNewAdbMirTxApplicable to AU/BU only with SW version 5.0 and higher. The value configured in the relevant SU/RB for the MIR: SU/RB to AU/BU parameter. For SU-EZ SW version 1.00.15, it represents the value set in AU-EZ.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.11 |
brzaccVLNewAdbCirRxApplicable to AU/BU only with SW version 5.0 and higher. For BreezeNET-B products it is 0. This parameter is not relevant for SU-EZ with version 1.00.15 and it is 0. The value configured in the relevant SU for the CIR: AU to SU parameter.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.12 |
brzaccVLNewAdbMirRxApplicable to AU/BU only with SW version 5.0 and higher. This parameter is not relevant for SU-EZ with version 1.00.15 and it is 0. The value configured in the relevant SU/RB for the MIR: AU/BU to SU/RB parameter.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.13 |
brzaccVLNewAdbCirMaxDelayApplicable to AU/BU only with SW version 5.0 and higher. For BreezeNET-B products and SU-EZ with SW version 1.00.15 it is not relevant. The value configured in the relevant SU/RB for the CIR Maximum Delay parameter. It returns maximum value on 32 bits for SU-EZ with 1.00.15 and this means NA (Not Available).ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.14 |
brzaccVLNewAdbAtpcOptionApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB ATPC option configuration.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.15 |
brzaccVLNewAdbAdapModOptionApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB adaptive modulation option configuration. It is not applicable for SU-EZ.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.16 |
brzaccVLNewAdbBurstModeOptionApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB burst mode option configuration. It is not applicable for SU-EZ.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.17 |
brzaccVLNewAdbConcatenationOptionApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB concatenation option configuration. It is not applicable for SU-EZ.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.18 |
brzaccVLNewAdbSecurityModeApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB security mode configuration. Not available for SU-EZ.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.19 |
brzaccVLNewAdbAuthOptionApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB authentication algorithm configuration. Not available for SU-EZ.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.20 |
brzaccVLNewAdbDataEncyptOptionApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB data encryption option configuration. Not available for SU-EZ.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.21 |
brzaccVLAdbWi2IPaddressApplicable to AU/BU only with SW version 5.0 and higher. The IP address of the Wi2 Access Point. Not available for SU-EZ.ro IpAddress .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.22 |
brzaccVLNewAdbStatusApplicable to AU/BU only with SW version 5.0 and higher. The status of the relevant SU/RB.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.23 |
brzaccVLNewAdbAgeApplicable to AU/BU only with SW version 5.0 and higher. The time since any packet was received from the relevant SU/RB.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.24 |
brzaccVLNewAdbDistanceApplicable to AU/BU only with SW version 5.0 and higher. The distance between the SU/RB and the AU/BU (In Kilometers). It is not applicable for SU-EZ and it returns 0.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.25 |
brzaccVLNewAdbSNRApplicable to AU/BU only with SW version 5.0 and higher. The average Signal to Noise Ratio in dB of frames received by the AU/BU from the relevant SU/RB.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.26 |
brzaccVLNewAdbMaxModulationLevelApplicable to AU/BU only with SW version 5.0 and higher. The value configured in the relevant SU/RB for the Maximum Modulation Level parameter. Modulation Level 8 is not applicable for units with HW revision A. It is not applicable for SU-EZ and it returns na.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.27 |
brzaccVLNewAdbTxFramesTotalApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.28 |
brzaccVLNewAdbDroppedFramesTotalApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of frames intended to the SU/RB that were dropped because they were retransmitted to the extent of the maximum allowed number of retransmissions without being acknowledged.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.29 |
brzaccVLNewAdbTxSuccessModLevel1Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 1.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.30 |
brzaccVLNewAdbTxSuccessModLevel2Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 2.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.31 |
brzaccVLNewAdbTxSuccessModLevel3Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/BU over the wireless link using modulation level 3.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.32 |
brzaccVLNewAdbTxSuccessModLevel4Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 4.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.33 |
brzaccVLNewAdbTxSuccessModLevel5Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 5.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.34 |
brzaccVLNewAdbTxSuccessModLevel6Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/BU over the wireless link using modulation level 6.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.35 |
brzaccVLNewAdbTxSuccessModLevel7Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 7.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.36 |
brzaccVLNewAdbTxSuccessModLevel8Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wireless link using modulation level 8. Not applicable for units with HW revision A.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.37 |
brzaccVLNewAdbTxFailedModLevel1Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 1.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.38 |
brzaccVLNewAdbTxFailedModLevel2Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 2.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.39 |
brzaccVLNewAdbTxFailedModLevel3Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 3.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.40 |
brzaccVLNewAdbTxFailedModLevel4Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 4.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.41 |
brzaccVLNewAdbTxFailedModLevel5Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 5.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.42 |
brzaccVLNewAdbTxFailedModLevel6Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 6.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.43 |
brzaccVLNewAdbTxFailedModLevel7Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 7.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.44 |
brzaccVLNewAdbTxFailedModLevel8Applicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 8. Not applicable for units with HW revision A.ro Counter32 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.45 |
brzaccVLNewAdbMainSwVersionApplicable to AU/BU only with SW version 5.0 and higher. Main Software Version of SU. Not available for SU-EZ.ro DisplayString .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.46 |
brzaccVLNewAdbShadowSwVersionApplicable to AU/BU only with SW version 5.0 and higher. Shadow Software Version of SU. Not available for SU-EZ.ro DisplayString .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.47 |
brzaccVLNewAdbReadOnlyCommunityApplicable to AU/BU only with SW version 5.0 and higher . SU/RB Read Only Community. Not available for SU-EZ.ro DisplayString .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.48 |
brzaccVLNewAdbWriteCommunityApplicable to AU/BU only with SW version 5.0 and higher. SU/RB Write Community The Community is accessible only with the Read-Write community string (administrator password). If the Read-Only community of the AU/BU is used this field will contain the SU/RB read-only community. Not available for SU-EZ with SW version lower than 1.1.1ro DisplayString .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.49 |
brzaccVLNewAdbAIFSApplicable to AU/BU only with SW version 5.0 and higher. The Arbitration Inter-Frame Spacing (AIFS) of relevant SU/RB. Not available for SU-EZ and it returns 0.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.50 |
brzaccVLNewAdbMinimumCWApplicable to AU/BU only with SW version 5.0 and higher. The Minimum Contention Window of relevant SU/RB. Not available for SU-EZ and it returns 0.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.51 |
brzaccVLNewAdbMaximumCWApplicable to AU/BU only with SW version 5.0 and higher. The Maximum Contention Window of relevant SU/RB. Not available for SU-EZ and it returns 0.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.52 |
brzaccVLNewAdbESSIDApplicable to AU/BU only with SW version 5.0 and higher. The ESSID of relevant SU/RB. The ESSID is accessible only with the write community string (administrator password).ro DisplayString .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.53 |
brzaccVLNewAdbRSSIApplicable to AU/BU only with SW version 5.1 and higher. The average Received Signal Strength Indication of frames received by the AU/BU from the relevant SU/RB. This value is given in dBm units.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.54 |
brzaccVLNewAdbDfsOptionApplicable to AU/BU only with SW version 5.5.21 and higher. The DFS option configuration received by the AU/BU from the relevant SU/RB.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.55 |
brzaccVLAggregateMIRCIR OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.11.5.1.4 |
brzaccVLAggregateMIRUplinkApplicable to AU only with SW version 6.0 and higher. Aggregate MIR uplink.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.4.1 |
brzaccVLAggregateMIRDownlinkApplicable to AU only with SW version 6.0 and higher. Aggregate MIR downlink.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.4.2 |
brzaccVLAggregateCIRUplinkApplicable to AU only with SW version 6.0 and higher. Aggregate CIR uplink.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.4.3 |
brzaccVLAggregateCIRDownlinkApplicable to AU only with SW version 6.0 and higher. Aggregate CIR downlink.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.5.1.4.4 |
brzaccVLUpLinkQualityIndicator OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.11.6 |
brzaccVLMeasureUpLinkQualityIndicatorApplicable to SU/RB. Starts calculation of LQI. The calculation will be for a period of 10 seconds.rw Enumeration .1.3.6.1.4.1.12394.1.1.11.6.1 |
brzaccVLReadUpLinkQualityIndicatorApplicable to SU/RB. The results of the last LQI calculation. Range: 1 to 8.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.6.2 |
brzaccVLUpLinkQualityIndicatorStatusApplicable to SU/RB Only. Indicates the test conditions. fullTest means that there are no limitations on the range of available modulation levels, and that all modulation levels from 1 to 8 can be used. limitedTest indicates that the results may not indicate the true quality since the available range is limited - by HW (HW Revision A), or by the applicable parameters in the country code, or by the configurable Maximum Modulation Level parameter.ro Enumeration .1.3.6.1.4.1.12394.1.1.11.6.3 |
brzaccVLMacPinpoint OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.11.7 |
brzaccVLMacPinpointTableApplicable to AU/BU only. A table that contains information about wireless device used by a certain Ethernet station in order to connect to the wireless network SEQUENCE OF BrzaccVLMacPinpointEntry .1.3.6.1.4.1.12394.1.1.11.7.1 |
brzaccVLMacPinpointEntryApplicable to AU/BU only. An entry in the MAC Pinpoint Table. Each entry contains an Ethernet station MAC address and the MAC address of the wireless device used to connect it to the wireless network BrzaccVLMacPinpointEntry .1.3.6.1.4.1.12394.1.1.11.7.1.1 |
mptEthernetStationMACAddressApplicable to AU/BU only. The MAC address of the Ethernet station. It is used as an index in the MAC Pinpoint Table.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.11.7.1.1.1 |
mptUnitMACAddressApplicable to AU/BU only. The MAC address of the wireless device used by the station with the MAC Address from the index in order to access the wireless network.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.11.7.1.1.2 |
brzaccVLDrapGatewaysTableThis table provides information about Gateways supporting DRAP that are registered at the AU SEQUENCE OF BrzaccVLDrapGatewayEntry .1.3.6.1.4.1.12394.1.1.11.8 |
brzaccVLDrapGatewayEntryA Drap Gateway Entry. BrzaccVLDrapGatewayEntry .1.3.6.1.4.1.12394.1.1.11.8.1 |
brzaccVLDrapGatewayIndexGateway Entry's Indexro INTEGER .1.3.6.1.4.1.12394.1.1.11.8.1.1 |
brzaccVLDrapGatewayIPThe IP address of the Gatewayro IpAddress .1.3.6.1.4.1.12394.1.1.11.8.1.2 |
brzaccVLDrapGatewayTypeThe Gateway typero Enumeration .1.3.6.1.4.1.12394.1.1.11.8.1.3 |
brzaccVLDrapGatewayNoOfActiveVoiceCallsThe current number of active voice calls handled by the Gatewayro INTEGER .1.3.6.1.4.1.12394.1.1.11.8.1.4 |
brzaccVLHiddenESSIDTableApplicable to SU/RB only with SW version 5.0 and higher. The AU/BU units that rejected the subcribers because of worng ESSID SEQUENCE OF BrzaccVLHiddenESSIDEntry .1.3.6.1.4.1.12394.1.1.11.9 |
brzaccVLHiddenESSIDEntryApplicable to SU/RB only with SW version 5.0 and higher. An entry in the Hidden ESSID table. BrzaccVLHiddenESSIDEntry .1.3.6.1.4.1.12394.1.1.11.9.1 |
brzaccVLHiddenESSIDMacAddressThe MAC Address of the staion that rejected the subscriber beacuse of wrong ESSIDro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.11.9.1.1 |
brzaccVLHiddenESSIDAgeThe time (in second) passed since the corresponding AU/BU rejected the subscriber because of wrong ESSIDro INTEGER .1.3.6.1.4.1.12394.1.1.11.9.1.2 |
brzaccVLAverageReceiveRSSIApplicable to SU/RB only. The average Received Signal Strength Indication of frames. This value is given in dBm units.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.10 |
brzaccVLCurrentNoiseFloorApplicable to all units. The current Noise Floor of the unit.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.11 |
brzaccVLAverageSignalInterferenceRatioApplicable to all units. The current Average Signal Interference Ratio of the unit.ro INTEGER .1.3.6.1.4.1.12394.1.1.11.12 |
brzaccVLTraps OBJECT IDENTIFIER .1.3.6.1.4.1.12394.1.1.14 |
brzaccVLTrapSUMacAddrApplicable to AU/BU only. SU/RB MAC Address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.14.1 |
brzaccVLTrapTextTextual string for future use.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.14.3 |
brzaccVLTrapToggleApplicable to AU/BU only. An On/Off toggle status.ro Enumeration .1.3.6.1.4.1.12394.1.1.14.4 |
brzaccVLTrapParameterChangedNot applicable starting with version 5.0. Applicable to all units. A modification to one of the parameters related to CIR/MIR, IP Filtering or VLAN.ro Enumeration .1.3.6.1.4.1.12394.1.1.14.5 |
brzaccVLTrapAccessRightsApplicable to all units. The access rights used for login.ro Enumeration .1.3.6.1.4.1.12394.1.1.14.6 |
brzaccVLTrapLogApplicable to all units. Login or logout to the Monitor program via Telnet.ro Enumeration .1.3.6.1.4.1.12394.1.1.14.7 |
brzaccVLTrapTelnetUserIpAddressApplicable to all units. The IP address of a Telnet user.ro IpAddress .1.3.6.1.4.1.12394.1.1.14.8 |
brzaccVLTrapRTxApplicable to AU/BU only. Retransmissions as a percentage of total transmissions.ro INTEGER .1.3.6.1.4.1.12394.1.1.14.9 |
brzaccVLTrapFtpOrTftpStatusApplicable to all units. The status of the last FTP/TFTP loading procedure.ro Enumeration .1.3.6.1.4.1.12394.1.1.14.10 |
brzaccVLDFSMoveFreqApplicable to AU/BU with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLTrapDFSMoveFreq New to support a resolution of 0.5 MHz). The new frequency in MHz after detecting radar on a previous channel.ro INTEGER .1.3.6.1.4.1.12394.1.1.14.11 |
brzaccVLDFSMoveFreqNewApplicable to AU/BU. The new frequency in MHz after detecting radar on a previous channel. (Replaces brzaccVLDFSMoveFreq to support a resolution of 0.5 MHz for units with HW revision C and higher. If HW revision is B it will contain the same value as brzaccVLDFSMoveFreq, but represented as string.).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.14.12 |
brzaccVLEthBroadcastThresholdExceededApplicable to all units. The number of packets that are dropped by the ethernet broadcast/multicast limiter.ro INTEGER .1.3.6.1.4.1.12394.1.1.14.13 |
brzaccVLTrapSubscriberTypeApplicable to AUS only. The type of subscriber that was rejected by AUSro Enumeration .1.3.6.1.4.1.12394.1.1.14.14 |
brzaccVLTrapMACAddressApplicable to BU/RB only. The MAC address of the BNET B unit whose type has been changedro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.14.15 |
brzaccVLNewUnitTypeTrapApplicable to BU/RB only. The new type of the BNET B unit.ro Enumeration .1.3.6.1.4.1.12394.1.1.14.16 |
brzaccVLTrapSWVersionThe SW version of the SU that tries to associate with a station that has Wireless Link Prioritization Enabledro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.14.17 |
brzaccVLTrapSequenceNumberApllicable to AU/BU only. Trap Variable indicating the sequence number of the last trap generated.ro INTEGER .1.3.6.1.4.1.12394.1.1.14.18 |
brzaccVLTrapUnitMacAddrApplicable to all units. The MAC Address of the unit that is initiating the trap.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.12394.1.1.14.19 |
brzaccVLTrapParameterGroupCodeApplicable to AU/BU only. The code of group parameter that was changed.ro INTEGER .1.3.6.1.4.1.12394.1.1.14.20 |
brzaccVLTrapNewIPApplicable to AU/BU only. The code of group parameter that was changed.ro IpAddress .1.3.6.1.4.1.12394.1.1.14.21 |
alvarionOID OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4 |
brzAccessVLOID OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1 |
brzAccessVLAU OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.1 |
brzAccessVLSU OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.2 |
brzAccessVLProducts OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.3 |
brzaccVLSUassociatedAUTRAPAn AU/BU trap indicating a new association with an SU/RB. NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.2 |
brzaccVLAUdisassociatedTRAPAn AU/BU trap indicating that an SU/RB has been disassociated from the AU/BU. NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.3 |
brzaccVLAUagingTRAPAn AU/BU trap indicating that the unit association was aged out and removed from the Association database following its failure to acknowledge a specified number of consecutive frames. NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.4 |
brzaccVLSUassociatedTRAPStarting with 5.0 this trap is not generated. An SU/RB trap indicating association with an AU/BU. In addition to the MAC address information of the AU/BU, the trap also includes information on the average SNR of frames received from the AU/BU. NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.6 |
brzaccVLAUwirelessQualityTRAPAn AU/BU trap, indicating that the quality of the wireless link (retransmissions rate) has changed and dropped below (Off) or increased above (On) a threshold , defined by the *brzaccVLWirelessTrapThreshold. The threshold for AU/BU is a percentage of retransmissions. NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.20 |
brzaccVLPowerUpFromResetAn AU/BU trap indicating power up after Reset. NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.101 |
brzaccVLTelnetStatusTRAPApplicable to all units. A trap indicating that a log-in or log-out has been performed via Telnet. Includes the log-in access right and the IP address of the PC performing Telnet. NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.102 |
brzaccVLParameterChangedTRAPStarting with version 5.0, this trap is not generated. It is replaced by brzaccVLParameterChangeTRAP. Applicable to all units. A trap indicating a change in a CIR/MIR, IP Filter or VLAN parameter. NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.103 |
brzaccVLLoadingStatusTRAPApplicable to all units. A trap indicating that last FTP/TFTP firmware loading process has been finished successfully or failed. NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.104 |
brzaccVLPromiscuousModeTRAPAn AU/BU trap, indicating that the AU/BU In (On) Promiscuous Mode or out (Off) Promiscuous Mode. NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.105 |
brzaccVLDFSRadarDetectedTRAPDFS: Applicable to AU/BU only. A trap indicating that a radar was detected. NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.106 |
brzaccVLDFSFrequencyTRAPApplicable to AU/BU only. A trap indicating that the unit moved to a new frequency. NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.107 |
brzaccVLDFSNoFreeChannelsExistsTRAPApplicable to AU/BU only. A trap indicating that a radar was detected and there is no free channel. NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.108 |
brzaccVLEthBroadcastMulticastLimiterTRAPApplicable to all units. The trap is sent if the ethernet broadcast filter threshold is exceeded and it contains the number of dropped packets. NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.109 |
brzaccVLAUSUnsupportedSubscriberTypeTRAPApplicable to AUS only. This trap is generated when a subscriber with unsupported type tries to associate to AUS. The AUS supports only SU-3, SU-6, SU-V. If licensed, SU-54 is supported too. For 900 MHz band, AUS supports only SU-3. If licensed, SU-8 is supported too. The first variable of the trap is the subscriber MAC Address. The second variable is the type of subscriber NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.110 |
brzaccVLUnitTypeChangedTRAPApplicable to BU/RB only. This trap is generated when the user changes the type of the BreezeNET B unit. The RB can be converted in BU or vice versa. The first variable of the trap is the unit MAC Address. The second variable is the new type of the unit NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.111 |
brzaccVLWLPrioritizationNotSupportedBySUTRAPApplicable to AU/BU only. This trap is generated when an SU/RB with a SW version below 4.0 that does not support Wireless Link Prioritization is associated with an AU/BU with thw Wireless Link Prioritization Option enabled. The first variable of the trap is the SU/RB MAC Address. The second variable is the SW version of the SU/RB NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.112 |
brzaccVLParameterChangeTRAPApplicable to AU/BU only with SW version 5.0 or higher. This trap is generated by AU/BU when a parameter from a group was changed. Also, if an SU/RB parameter is changed and if the parameter is in ADB the Au/BU will generate the trap for that SU/RB. brzaccVLTrapSequenceNumber - trap sequence number brzaccVLTrapUnitMacAddr - MAC Address of the AU/BU if the parametr was changed in AU/BU - MAC Address of the SU/RB if the parameter was changed in SU/RB brzaccVLTrapParameterGroupCode- Code of Parameter Group NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.113 |
brzaccVLRunTimeIPChangeTRAPApplicable to AU/BU only with SW version 5.0 or higher. This trap is generated by AU/BU when the running IP of the unit was changed. Also, if the running IP of an associated SU/RB is changed this trap will be genarated by AU/BU. brzaccVLTrapSequenceNumber - trap sequence number brzaccVLTrapUnitMacAddr - MAC Address of the AU/BU if the running IP was changed in AU/BU - MAC Address of the SU/RB if the running IP was changed in SU/RB brzaccVLTrapNewIP - New IP of the unit. NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.114 |
brzaccVLDisassociateAllStationsTRAPApplicable to AU/BU only. A trap indicating that all stations were disassociated. NOTIFICATION-TYPE .1.3.6.1.4.1.12394.4.1.3.115 |
brzAccessVLAU_BS OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.4 |
brzAccessVLAU_SA OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.5 |
brzAccessVLAUS_BS OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.6 |
brzAccessVLAUS_SA OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.7 |
brzAccessAU_EZ OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.8 |
brzAccessVLSU_6_1D OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.11 |
brzAccessVLSU_6_BD OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.12 |
brzAccessVLSU_24_BD OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.13 |
brzAccessVLSU_BD OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.14 |
brzAccessVLSU_54_BD OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.15 |
brzAccessVLSU_3_1D OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.16 |
brzAccessVLSU_3_4D OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.17 |
brzAccessVLSU_I OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.18 |
brzAccessVLSU_EZ OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.19 |
brzAccessVLSU_V OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.20 |
brzNetB_BU_B14 OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.21 |
brzNetB_BU_B28 OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.22 |
brzNetB_BU_B100 OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.23 |
brzNetB_BU_B10 OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.24 |
brzNetB_RB_B14 OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.31 |
brzNetB_RB_B28 OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.32 |
brzNetB_RB_B100 OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.33 |
brzNetB_RB_B10 OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.34 |
brzAccess4900_AU_BS OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.41 |
brzAccess4900_AU_SA OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.42 |
brzAccess4900_SU_BD OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.51 |
brzAccessVLSU_8_BD OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.61 |
brzAccessVLSU_1_BD OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.62 |
brzAccessVLSU_3_L OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.63 |
brzAccessVLSU_6_L OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.64 |
brzAccessVLSU_12_L OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.65 |
brzAccessVL_AU OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.70 |
brzAccessVL_SU OBJECT IDENTIFIER .1.3.6.1.4.1.12394.4.1.75 |