ALCATEL-IND1-VRRP3-MIB
AI MIB Summary
The ALCATEL-IND1-VRRP3-MIB enables SNMP monitoring of Virtual Router Redundancy Protocol (VRRP) instances on Alcatel-Lucent hardware, specifically tracking state transitions, priority levels, and preemption settings for both IPv4 and IPv6 address groups. This module provides granular visibility into active/standby failover status and virtual router advertisements to ensure high availability of gateway services.
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB):
Proprietary VRRP MIB definitions for simultaneous support of IPv4 and IPv6 protocols.
The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1VRRP3MIB.1.3.6.1.4.1.6486.801.1.2.1.28.2
51
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
51 total| Object Name |
|---|
alcatelIND1VRRP3MIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
Proprietary VRRP MIB definitions for simultaneous
support of IPv4 and IPv6 protocols.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special,
or consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.28.2 |
alaVrrp3Notifications OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.28.2.0 |
alaVrrp3TrapNewMasterThe newMaster trap indicates that the sending agent
has transitioned to 'Master' state. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.28.2.0.1 |
alaVrrp3TrapProtoErrorThe error trap indicates that the sending agent has
encountered the protocol error indicated by
ErrorReason. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.28.2.0.2 |
alaVrrp3Operations OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.28.2.1 |
alaVrrp3NotificationCntlIndicates whether the VRRP-enabled router will generate
SNMP traps for events defined in this MIB. 'Enabled'
results in SNMP traps; 'disabled', no traps are sent.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.1 |
alaVrrp3OperTableUnified Operations table for a VRRP router which
consists of a sequence (i.e., one or more conceptual
rows) of 'alaVrrp3OperEntry' items. SEQUENCE OF AlaVrrp3OperEntry .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.2 |
alaVrrp3OperEntryAn entry in the alaVrrp3OperTable containing the
operational characteristics of a virtual router. On a
VRRP router, a given virtual router is identified by a
combination of the IP version, VRID, and ifIndex.
Note that rows in this table can be distinguished on a
Multi-stacked device running both VRRP over IPv4 and
IPv6 interfaces.
Rows in the table cannot be modified unless the value
of 'alaVrrp3OperAdminState' is 'disabled' and the
'alaVrrp3OperState' has transitioned to
'initialize' AlaVrrp3OperEntry .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.2.1 |
alaVrrp3OperIpVersionThis object contains the IP version on which this VRRP
instance is running. Enumeration .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.2.1.1 |
alaVrrp3OperVrIdThis object contains the Virtual Router Identifier
(VRID). VrId (VRRP-MIB) .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.2.1.2 |
alaVrrp3OperVirtualMacAddrThe virtual MAC address of the virtual router.
Although this object can be derived from the
'alaVrrp3OperVrId' object, it is defined so that it
is easily obtainable by a management application and
can be included in VRRP-related SNMP traps.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.2.1.3 |
alaVrrp3OperStateThe current state of the virtual router. This object
has three defined values:
- `initialize', which indicates that the
virtual router is waiting for a startup event.
- `backup', which indicates the virtual router is
monitoring the availability of the master router.
- `master', which indicates that the virtual router
is forwarding packets for IP addresses that are
associated with this router.
Setting the `alaVrrp3OperAdminState' object (below)
Initiates transitions in the value of this object.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.2.1.4 |
alaVrrp3OperAdminStateThis object will enable/disable the virtual router
function. Setting the value to `up', will transition
the state of the virtual router from `initialize' to
`backup' or `master', depending on the value of
`alaVrrp3OperPriority'.
Setting the value to `down', will transition the
router from `master' or `backup' to `initialize'. State
transitions may not be immediate; they sometimes depend
on other factors, such as the interface (IF) state.
The `alaVrrp3OperAdminState' object must be set to
`down' prior to modifying the other read-create objects
in the conceptual row. The value of the
alaVrrp3OperRowStatus' object (below) must be
`active', signifying that the conceptual row is valid
(i.e., the objects are correctly set), in order for
this object to be set to `up'.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.2.1.5 |
alaVrrp3OperPriorityThis object specifies the priority to be used for the
virtual router master election process. Higher values
imply higher priority.
A priority of '0', although not settable, is sent by
the master router to indicate that this router has
ceased to participate in VRRP and a backup virtual
router should transition to become a new master.
A priority of 255 is used for the router that owns the
associated IP address(es).rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.2.1.6 |
alaVrrp3OperVersionThis object contains the VRRP version this VRRP
instance is running.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.2.1.7 |
alaVrrp3OperIpAddrCountThe number of IP addresses associated with this
virtual router. This number is equal to the number
of rows in the alaVrrp3AssoIpAddrTable that
correspond to a given combination of IP version,
VRID, and ifIndex.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.2.1.8 |
alaVrrp3OperMasterIpAddrTypeThis specifies the type of
alaVrrp3OperMasterIpAddr in this row.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.2.1.9 |
alaVrrp3OperMasterIpAddrThe master router's real (primary for vrrp over IPv4)
IP address. This is the IP address listed as the
source in the advertisement last received by this
virtual router. For IPv6, a link local address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.2.1.10 |
alaVrrp3OperPrimaryIpAddrTypeThis specifies the the type of
alaVrrp3OperPrimaryIpAddr in this row.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.2.1.11 |
alaVrrp3OperPrimaryIpAddrFor VRRP over IPv6 this is the link local address
for a given ifIndex. For VRRP over IPv4, in the
case where there is more than one IP address for
a given `ifIndex', this object is used to
specify the IP address that will become the
alaVrrp3OperMasterIpAddr', should the virtual router
transition from backup to master.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.2.1.12 |
alaVrrp3OperAdvIntervalThe time interval, in centiseconds, between sending
advertisement messages. Only the master router sends
VRRP advertisements.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.2.1.13 |
alaVrrp3OperPreemptModeControls whether a higher priority virtual router will
preempt a lower priority master.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.2.1.14 |
alaVrrp3OperAcceptModeControls whether a virtual router in the master state
will accept packets addressed to the address owner's
IPv6 address as its own it it is not the IP address
owner.
This is required only for rows indicating VRRP over IPv6.
This object can be sparse and should not be implemented
for rows indicating VRRP for Ipv4.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.2.1.15 |
alaVrrp3OperUpTimeThis is the value of the `sysUpTime' object when this
virtual router (i.e., the `alaVrrp3OperState') transitioned
out of `initialized'.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.2.1.16 |
alaVrrp3OperRowStatusThe row status variable, used in accordance to
installation and removal conventions for conceptual
rows. The rowstatus of a currently active row in the
alaVrrp3OperTable is constrained by the operational
state of the corresponding virtual router.
When `alaVrrp3OperRowStatus' is set to active(1), no
other objects in the conceptual row, with the exception
of `alaVrrp3OperAdminState', can be modified. Prior
to setting the `alaVrrp3OperRowStatus' object from
`active' to a different value, the
`alaVrrp3OperAdminState' object must be set to
`down' and the `alaVrrp3OperState' object be transitioned
to `initialize'.
To create a row in this table, a manager sets this
object to either createAndGo(4) or createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the `alaVrrp3OperRowStatus'
column will be read as notReady(3).
In particular, a newly created row cannot be made
active(1) until (minimally) the corresponding instance
of `alaVrrp3OperVrId' has been set and there is at
least one active row in the `alaVrrp3AssoIpAddrTable'
defining an associated IP address for the virtual
router.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.2.1.17 |
alaVrrp3AssoIpAddrTableThe table of addresses associated with this
virtual router. SEQUENCE OF AlaVrrp3AssoIpAddrEntry .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.3 |
alaVrrp3AssoIpAddrEntryAn entry in the table contains an IP address that is
associated with a virtual router. The number of rows
for a given IP version, VrId, and ifIndex will equal
the number of IP addresses associated (e.g., backed
up) by the virtual router (equivalent to
'alaVrrp3OperIpAddrCount').
Rows in the table cannot be modified unless the value
of `alaVrrp3OperAdminState' is `disabled' and the
`alaVrrp3OperState' has transitioned to`initialize'. AlaVrrp3AssoIpAddrEntry .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.3.1 |
alaVrrp3AssoIpAddrTypeThe IP addresses type of alaVrrp3AssoIpAddr in this
row. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.3.1.1 |
alaVrrp3AssoIpAddrThe assigned IP addresses that a virtual router is
responsible for backing up. InetAddress .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.3.1.2 |
alaVrrp3AssoIpAddrRowStatusThe row status variable, used according to
installation and removal conventions for conceptual
rows. Setting this object to active(1) or
createAndGo(4) results in the addition of an associated
address for a virtual router.
Destroying the entry or setting it to notInService(2)
removes the associated address from the virtual router.
The use of other values is implementation-dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.3.1.3 |
alaVrrp3TrapNewMasterReasonThis indicates the reason for NewMaster trap.
Used by alaVrrp3TrapNewMaster trap.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.4 |
alaVrrp3TrapProtoErrReasonThis indicates the reason for protocol error trap.
Used by alaVrrp3TrapProtoError trap.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.28.2.1.5 |
alaVrrp3Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.28.2.2 |
alaVrrp3RouterChecksumErrorsThe total number of VRRP packets received with an
invalid VRRP checksum value.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.28.2.2.1 |
alaVrrp3RouterVersionErrorsThe total number of VRRP packets received with an
unknown or unsupported version number.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.28.2.2.2 |
alaVrrp3RouterVrIdErrorsThe total number of VRRP packets received with an
invalid VRID for this virtual router.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.28.2.2.3 |
alaVrrp3RouterStatsTableTable of virtual router statistics. SEQUENCE OF AlaVRRP3RouterStatsEntry .1.3.6.1.4.1.6486.801.1.2.1.28.2.2.4 |
alaVrrp3RouterStatsEntryAn entry in the table, containing statistics
information about a given virtual router. AlaVRRP3RouterStatsEntry .1.3.6.1.4.1.6486.801.1.2.1.28.2.2.4.1 |
alaVrrp3StatsBecomeMasterThe total number of times that this virtual router's
state has transitioned to MASTER.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.28.2.2.4.1.1 |
alaVrrp3StatsAdvertiseRcvdThe total number of VRRP advertisements received by
this virtual router.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.28.2.2.4.1.2 |
alaVrrp3StatsAdvIntervalErrorsThe total number of VRRP advertisement packets
received for which the advertisement interval is
different than the one configured for the local virtual
router.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.28.2.2.4.1.3 |
alaVrrp3StatsIpTtlErrorsThe total number of VRRP packets received by the
virtual router with IP TTL (Time-To-Live) not equal to
255. It also indicates the number of VRRPv3 packets
received by the virtual router with IPv6 hop limit not
equal to 255.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.28.2.2.4.1.4 |
alaVrrp3StatsPriZeroPktsRcvdThe total number of VRRP packets received by the
virtual router with a priority of '0'.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.28.2.2.4.1.5 |
alaVrrp3StatsPriZeroPktsSentThe total number of VRRP packets sent by the virtual
router with a priority of '0'.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.28.2.2.4.1.6 |
alaVrrp3StatsInvldTypePktsRcvdThe number of VRRP packets received by the virtual
router with an invalid value in the 'type' field.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.28.2.2.4.1.7 |
alaVrrp3StatsAddressListErrorsThe total number of packets received for which the
address list does not match the locally configured list
for the virtual router.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.28.2.2.4.1.8 |
alaVrrp3StatsInvldAuthTypeThe total number of packets received with 'Auth Type'
not equal to Authentication Type 0, No Authentication.
This is required only for rows indicating VRRP over IPv4.
This object can be sparse and should not be implemented
for rows indicating VRRP for Ipv6.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.28.2.2.4.1.9 |
alaVrrp3StatsPacketLengthErrorsThe total number of packets received with a packet
length less than the length of the VRRP header.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.28.2.2.4.1.10 |
alaVrrp3Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.28.2.3 |
alaVrrp3MIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.28.2.3.1 |
alaVrrp3MIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.28.2.3.2 |