ALCATEL-IND1-VLAN-STACKING-MIB
The ALCATEL-IND1-VLAN-STACKING-MIB manages Alcatel-Lucent switching hardware to configure VLAN stacking (Q-in-Q) parameters, specifically monitoring and controlling the association between physical ports and service VLANs (SVLANs) for provider edge traffic segregation.
Imported Objects
Objects
25 total| Object Name |
|---|
alcatelIND1VLANStackingMIBThe parameters for configuration of the VLAN Stacking feature,
including the association between ports and svlans.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2006 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.37.1 |
alcatelIND1VLANStackingMIBObjectsBranch For VLAN Stacking Managed Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.37.1.1 |
alaVlanStackingPort OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.1 |
alaVstkPortTableA table that contains port-specific information for the VLAN Stacking feature.
An entry in this table is created when a port is configured with VLAN stacking
capability, OR when a port is configured with a specific vendor ethertype, a particular
bridge protocol action. SEQUENCE OF AlaVstkPortEntry .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.1.1 |
alaVstkPortEntryA VLAN Stacking port entry. AlaVstkPortEntry .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.1.1.1 |
alaVstkPortNumberThe port ifindex of the port for which this entry contains
VLAN Stacking management information.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.1.1.1.1 |
alaVstkPortTypeThe type of this VLAN Stacking port. User-customer (1) is a VLAN Stacking
user port connected to customer network. User-provider (2) is a VLAN Stacking
user port used to run provider management traffic. Network (2) indicates a network
facing port.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.1.1.1.2 |
alaVstkPortVendorTpidThe TPID for this port. It is used for the incoming data
traffic parsing and it is substituted to the 802.1Q standard Tpid for
the outgoing data traffic. This is used for compatibility with other vendor
equipment. The default value is the standard value 0x88a8.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.1.1.1.3 |
alaVstkPortBpduTreatmentThe customer bpdu treatment for this port. It defines the type of
processing applied to the user's bridge protocol data unit.
The bridge protocol treatment (flooded) floods any user's bridge protocol data unit
to all user ports and network ports on the same SVLAN.
The bridge protocol (dropped) drops any user's bridge protocol data unit.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.1.1.1.4 |
alaVstkPortAcceptFrameTypeThe acceptable frame types on this port.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.1.1.1.5 |
alaVstkPortLookupMissTreatment of tagged packets upon vlan lookup miss. Drop (1) means that on lookup
miss the packets will be dropped. Default (2) means that on lookup miss the
default SVLAN for that port will be used to tunnel the packets.
This is significant only for user port.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.1.1.1.6 |
alaVstkPortDefaultSvlanThe default svlan of this port.rw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.1.1.1.7 |
alaVstkPortRowStatusThe status of this table entry. The supported value supported for set are
createAndGo (4) and destroy(6), to create or remove a vlan-stacking port.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.1.1.1.8 |
alaVstkPortLegacyStpBpduThe legacy STP BPDU treatment for this port. It defines the type of processing
applied to STP legacy BPDUs on network ports. Legacy BPDU refer to conventional/customer
BPDUs with MAC address 01:80:c2:00:00:00 and its processing on network ports can be
enabled/disabled by this object.By default the value is disabled i.e
provider MAC BPDU with MAC address 01:80:c2:00:00:08 would be processed at network ports.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.1.1.1.9 |
alaVlanStackingSvlanPort OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.2 |
alaVstkSvlanPortTableA table that contains svlan/ipmvlan-port association for the VLAN Stacking feature. SEQUENCE OF AlaVstkSvlanPortEntry .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.2.1 |
alaVstkSvlanPortEntryThe svlan/ipmvlan-port association. AlaVstkSvlanPortEntry .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.2.1.1 |
alaVstkSvlanPortSvlanNumberNumber identifying the svlan/ipmvlan.ro INTEGER .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.2.1.1.1 |
alaVstkSvlanPortPortNumberThe port ifindex of the port associated to the svlan/ipmvlan.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.2.1.1.2 |
alaVstkSvlanPortCvlanNumberThe customer vlan id associated to the svlan/ipmvlan.ro INTEGER .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.2.1.1.3 |
alaVstkSvlanPortModeThe vlan stacking mode: double tagging (1) or vlan translation/mapping (2).
Only translation mode is valid in case of IPM Vlansrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.2.1.1.4 |
alaVstkSvlanPortRowStatusThe status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove an
svlan-port association.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.37.1.1.2.1.1.5 |
alcatelIND1VLANStackingMIBConformanceBranch For VLAN Stacking Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.37.1.2 |
alcatelIND1VLANStackingMIBGroupsBranch For VLAN Stacking Units Of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.37.1.2.1 |
alcatelIND1VLANStackingMIBCompliancesBranch For VLAN Stacking Compliance Statements. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.37.1.2.2 |
More MIBs from AL-Enterprise
Browse all AL-EnterpriseMIBs →The ALCATEL-IND1-QOS-MIB enables monitoring and configuration of Quality of Service (QoS) policies, traffic shaping parameters, and access control list (ACL) filtering rules on Alcatel-Lucent network infrastructure. It provides visibility into queue depths, packet discard rates, and bandwidth allocation statistics to enforce service level agreements and traffic prioritization.
The ALCATEL-IND1-SERVICE-MGR-MIB provides configuration parameters for the Alcatel-Lucent service manager feature, enabling the management of service provisioning, activation, and lifecycle states on carrier-grade network elements. This module facilitates the monitoring of service instance attributes and operational status to ensure correct delivery of managed services across the infrastructure.
The ALCATEL-IND1-FIPS-MIB module enables SNMP-based monitoring of MAC address learning tables and forwarding database states on Alcatel-Lucent Birds of Prey series network switches. It provides enterprise-specific access to layer 2 switching metrics, including learned MAC addresses and their associated port bindings, for traffic analysis and security auditing.
The ALCATEL-IND1-BGP-MIB enables SNMP-based monitoring and configuration of Border Gateway Protocol (BGP) parameters on Alcatel-Lucent network devices, specifically tracking BGP session states, neighbor relationships, and protocol-specific counters. This module provides visibility into the operational status and performance metrics of BGP routing processes to facilitate network troubleshooting and policy enforcement.
The ALCATEL-IND1-DEVICES MIB defines SNMP Object Identifiers for monitoring the physical inventory, chassis status, and module states of Alcatel-Lucent OmniSwitch 4000, 7000, 8000, and 9000 series networking hardware. It enables network management systems to retrieve device topology data, component presence, and hardware health indicators specific to these enterprise switching platforms.
The ALCATEL-IND1-AAA-MIB provides SNMP access to monitor and manage Authentication, Authorization, and Accounting (AAA) subsystem metrics on Alcatel-Lucent "Birds of Prey" network hardware, specifically tracking user session states, authentication failures, and accounting records.