ALCATEL-IND1-VLAN-MGR-MIB
AI MIB Summary
The ALCATEL-IND1-VLAN-MGR-MIB enables SNMP-based configuration and monitoring of VLAN parameters and port-to-VLAN associations on Alcatel-Lucent "Birds of Prey" series network devices. This module specifically facilitates the retrieval and management of VLAN membership data, allowing administrators to verify which physical ports are assigned to specific VLANs within the distribution layer infrastructure.
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line Vlan Manager for the distribution of vlan configuration information, including the association between vlans and ports.
The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1VLANMgrMIB.1.3.6.1.4.1.6486.801.1.2.1.3.1
58
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
58 total| Object Name |
|---|
alcatelIND1VLANMgrMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Vlan Manager for the distribution of vlan configuration information,
including the association between vlans and ports.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.3.1 |
alcatelIND1VLANMgrMIBObjectsBranch For VLAN Manager
Subsystem Managed Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.3.1.1 |
vlanMgrVlan OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1 |
vlanTableA list of Virtual LAN instances in this device. SEQUENCE OF VlanEntry .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1 |
vlanEntryA VLAN entry. VlanEntry .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1 |
vlanNumberThe VLAN number identifying this instance. Valid
range from 1 to 4094.rw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.1 |
vlanDescriptionTextual description of the VLAN instance.rw DisplayString .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.2 |
vlanAdmStatusThe administrative status which can be set by
configuration. Disable(1) will disable ALL vports
that are connected to this VLAN, enable(2) will enable
ALL ports on this VLAN, delete(3) will detach and
delete the ports/routers AND remove the VLAN.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.3 |
vlanOperStatusProvide operating status of a particular VLAN environment.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.4 |
vlanStatusRow status to control creation/deletion of vlans.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.5 |
vlanStpStatusIndicates status of spanning tree for the current VLAN.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.6 |
vlanAuthentStatusIndicates status of authentication for the current VLAN.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.7 |
vlanVoiceStatusIndicates status of voice usage for the current VLAN.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.8 |
vlanIpAddressIP address of the VLAN's virtual router port.
Note: a vlan does not necessarily have an ip address.
Setting one requires that the ip address be set, and optionally the
following since they have defaults: ip mask, ip encap, ip forward.
Then setting vlanIpStatus to add will create the ip router port
for the given vlan (the index).rw IpAddress .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.9 |
vlanIpMaskSubnetwork mask for VLAN IP Address.
Default is class level mask for the ip address.rw IpAddress .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.10 |
vlanIpEncapVLAN's IP router port encapsulation.
Not applicable when there is no ip router port.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.11 |
vlanIpForwardVLAN's IP router port ip frame forwarding (disabled = ip host only).
Not applicable when there is no ip router port.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.12 |
vlanIpStatusProvides ability to add and remove the VLAN ip address.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.13 |
vlanIpxNetIPX network address.
Note: a vlan does not necessarily have an ipx net number.
Setting one requires that the ipx net be set, and optionally the
ipx encap, ipx rip-sap mode, and delay ticks (all have defaults).
Then the vlanIpxStatus should be set to add to create the
ipx router port.rw IpxNetworkAddress .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.14 |
vlanIpxEncapIPX of frame enapsulation of IPX VLAN router port.
Not applicable when there is no ipx router port.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.15 |
vlanIpxRipSapModeIPX advertisement mode.
Not applicable when there is no ipx router port.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.16 |
vlanIpxDelayTicksTick metric to use for supporting IPX routing decisions.rw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.17 |
vlanIpxStatusProvides ability to add and remove the VLAN ipx network node.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.18 |
vlanTagMobilePortStatusWhen enabled for a VLAN, a mobile port will be moved to the
VLAN based on the tag.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.19 |
vlanPortMacStatusWhen enabled for a VLAN, it will be considered a special VLAN not
affected by the ordinary vlan commands except the command to
delete a VLANro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.20 |
vlanLocalProxyArpWhen enabled for a VLAN, local proxy ARP processing happens on this=
VLAN.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.21 |
vlanMtuMaximum transmission unit i.e. the maximum size of packet that this
vlan can handle. It ranges from 1280 to 9198.rw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.22 |
vlan1x1StpStatusIndicates status of 1x1 spanning tree for the current VLAN.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.23 |
vlanflatStpStatusIndicates status of flat spanning tree for the current VLAN.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.24 |
vlanHABandwidthBandwidth of flood queue allocated by Q-driver for High Availability
vlans. The value ranges from 1 to 50 Mega bits per second.rw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.25 |
vlanSvlanTrafficTypeThe created SVLAN is desired for carrying customer or
provider traffic, default is customer. When creating
standard Vlans the value should be notApplicablerw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.26 |
vlanSvlanPriorityAll traffic getting mapped to this Svlan should be either
priority mapped or mapped to a specific priority 0-7, default
is priority 0. For standard Vlans the value should be -1rw INTEGER (-1..7) .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.27 |
vlanMacLearningControlStatusStatus of Mac Learning on a vlanrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.28 |
vlanMgrVpa OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2 |
vpaTableA list of Virtual LAN instances in this device. SEQUENCE OF VpaEntry .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1 |
vpaEntryA VLAN-Port Association (VPA) entry. VpaEntry .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1 |
vpaVlanNumberThe VLAN number component of this instance. Valid
range from 1 to 4094.rw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1.1 |
vpaIfIndexThe ifIndex component of this instance.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1.2 |
vpaTypeThe type of this vpa. Two are statically configured:
configured default VPA and qTagged VPA. The mirrored
is an internal type set for mirrored ports and the
rest are dynamic vlan's
1. cfgDefault - Default vlan VPA Type
2. qTagged - The qTagged vlan VPA Type
3. mobile - The vpa is dynamically created according
to rules/policies.
4. mirrored - Set internally when the vpa created is on
a mirrored port.
6. slvan - Service vlan vpa's which are created.
7. dynamic - Created by dynamic GVRP or MVRP Protocol.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1.3 |
vpaStateThe state of this vpa:
1. inactive - link down
2. blocking - link up, forwarding down
3. forwarding - link up, forwarding up, sources learned normally
4. filtering - link up, forwarding up, sources filtered.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1.4 |
vpaStatusThis is used to create or delete staticPrimary VPAs (default vlans
on a port ). Creation replaces the existing staticPrimary VPA
while deletion replaces the existing VPA so that the vlan number
is 1 for the given port. Of course the corresponding vlan and
port must exist.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1.5 |
vpaPortMacTypeValue of this field will decide whether the port represented by vpaIfIndex is a ingress port or egress port. This fiels is applicable only for portMac vlansrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1.6 |
vlanMgrVlanSet OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.3 |
vlanSetVlanCountCount of existing VLANs on switch.ro INTEGER .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.3.1 |
vlanSetVlanRouterCountCount of VLANs on switch with at least one router port configured.ro INTEGER .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.3.2 |
vlanSetIpRouterCountCount of VLANs on switch with IP router port configured.ro INTEGER .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.3.3 |
vlanSetIpxRouterCountCount of VLANs on switch with IPX router port configured.ro INTEGER .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.3.4 |
vlanSetMultiRtrMacStatusControls whether unique mac assigned to each vlan
with router port (limit 64).rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.3.5 |
vlanMgrHAPort OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.4 |
vlanHAPortTableA list of Port To HA vlan binding. SEQUENCE OF VlanHAPortEntry .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.4.1 |
vlanHAPortEntryPort To HA vlan binding entry. VlanHAPortEntry .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.4.1.1 |
vlanHAPortVlanIdThe vlan Id in which this port is a HA portrw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.4.1.1.1 |
vlanHAPortIfIndexThis port is associated with a HA vlan.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.4.1.1.2 |
vlanHAPortTypeValue of this field will decide whether the port represented by vlanHAPortIfIndex is a ingress port or egress port.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.4.1.1.3 |
vlanHAPortRowStatusThis indicate whether to add or delete the ifIndexrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.4.1.1.4 |
alcatelIND1VLANMgrMIBConformanceBranch For VLAN Manager
Subsystem Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.3.1.2 |
alcatelIND1VLANMgrMIBGroupsBranch For VLAN Manager
Subsystem Units Of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.3.1.2.1 |
alcatelIND1VLANMgrMIBCompliancesBranch For VLAN Manager
Subsystem Compliance Statements. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.3.1.2.2 |
More MIBs from AL-Enterprise
Browse all AL-EnterpriseMIBs →ALCATEL-IND1-QOS-MIB
The ALCATEL-IND1-QOS-MIB enables monitoring and configuration of Quality of Service (QoS) policies, traffic shaping parameters, and access control list (ACL) filtering rules on Alcatel-Lucent network infrastructure. It provides visibility into queue depths, packet discard rates, and bandwidth allocation statistics to enforce service level agreements and traffic prioritization.
760 objects→
ALCATEL-IND1-SERVICE-MGR-MIB
The ALCATEL-IND1-SERVICE-MGR-MIB provides configuration parameters for the Alcatel-Lucent service manager feature, enabling the management of service provisioning, activation, and lifecycle states on carrier-grade network elements. This module facilitates the monitoring of service instance attributes and operational status to ensure correct delivery of managed services across the infrastructure.
453 objects→
ALCATEL-IND1-FIPS-MIB
The ALCATEL-IND1-FIPS-MIB module enables SNMP-based monitoring of MAC address learning tables and forwarding database states on Alcatel-Lucent Birds of Prey series network switches. It provides enterprise-specific access to layer 2 switching metrics, including learned MAC addresses and their associated port bindings, for traffic analysis and security auditing.
432 objects→
ALCATEL-IND1-BGP-MIB
The ALCATEL-IND1-BGP-MIB enables SNMP-based monitoring and configuration of Border Gateway Protocol (BGP) parameters on Alcatel-Lucent network devices, specifically tracking BGP session states, neighbor relationships, and protocol-specific counters. This module provides visibility into the operational status and performance metrics of BGP routing processes to facilitate network troubleshooting and policy enforcement.
396 objects→
ALCATEL-IND1-DEVICES
The ALCATEL-IND1-DEVICES MIB defines SNMP Object Identifiers for monitoring the physical inventory, chassis status, and module states of Alcatel-Lucent OmniSwitch 4000, 7000, 8000, and 9000 series networking hardware. It enables network management systems to retrieve device topology data, component presence, and hardware health indicators specific to these enterprise switching platforms.
267 objects→
ALCATEL-IND1-AAA-MIB
The ALCATEL-IND1-AAA-MIB provides SNMP access to monitor and manage Authentication, Authorization, and Accounting (AAA) subsystem metrics on Alcatel-Lucent "Birds of Prey" network hardware, specifically tracking user session states, authentication failures, and accounting records.
252 objects→