ALCATEL-IND1-VIRTUALROUTER-MIB
The ALCATEL-IND1-VIRTUALROUTER-MIB provides SNMP access to configure and monitor Alcatel-Lucent enterprise-specific Virtual Router instances, exposing management objects for virtual routing table states, interface bindings, and instance operational parameters.
Imported Objects
Objects
41 total| Object Name |
|---|
alcatelIND1VirtualRouterMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This proprietary MIB contains management information for
the configuration of Virtual Router instances.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2006 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.10.15.1 |
alcatelIND1VirtualRouterMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1 |
alaVirtualRouterConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1 |
alaVirtualRouterNameTableTable containing Virtual Router Name to Virtual Router Index bindings.
There is always an entry for the default Virtual Router which has the
name default SEQUENCE OF AlaVirtualRouterNameEntry .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1 |
alaVirtualRouterNameEntryEach entry binds a Virtual Router Name to a Virtual Router index. AlaVirtualRouterNameEntry .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1 |
alaVirtualRouterNameThe name of a Virtual Router. SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.1 |
alaVirtualRouterNameIndexThe index associated with the Virtual Router name.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.2 |
alaVirtualRouterNameRowStatusControls creation and deletion of Row Status entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.3 |
alaVirtualRouterProfileThe profile name of the VRF. Profiles place constraints on what the
VRF can contain.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.4 |
alaVirtualRouterMaxRouteMapsThe maximum number of route-maps allowed in this VRF.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.5 |
alaVirtualRouterMaxSequencesThe maximum number of route-map sequences allowed in this VRF.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.6 |
alaVirtualRouterMaxTlvsThe maximum number of route-map TLV blocks allowed in this VRF.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.7 |
alaVirtualRouterMaxAccessListsThe maximum number of access-lists allowed in this VRF.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.8 |
alaVirtualRouterMaxAddressBlocksThe maximum number of access-list address blocks allowed in this VRF.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.9 |
alaVirtualRouterMaxMatchInterfacesThe maximum number of route-map match interfaces allowed in this VRF.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.10 |
alaVirtualRouterNoAutoLoadVrrpIf true, do not automatically load VRRP in max profile VRF.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.1.1.11 |
alaVrConfigTableTable containing Virtual Router protocol configuration. SEQUENCE OF AlaVrConfigEntry .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2 |
alaVrConfigEntryEach entry exists for each VRF in the alaVrtualRouterNameTable.
The entry represents the status of routing protocols on a VRF instance. AlaVrConfigEntry .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1 |
alaVrConfigIndexThe index associated with the Virtual Router name. Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.1 |
alaVrConfigRipStatusControls the load status of RIP on this router.
Loaded(1) is the only valid Set value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.2 |
alaVrConfigOspfStatusControls the load status of OSPF on this router.
Loaded(1) is the only valid Set value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.3 |
alaVrConfigIsisStatusControls the load status of ISIS on this router.
Loaded(1) is the only valid Set value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.4 |
alaVrConfigBgpStatusControls the load status of BGP on this router.
Loaded(1) is the only valid Set value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.5 |
alaVrConfigPimStatusControls the load status of PIM on this router.
Loaded(1) is the only valid Set value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.6 |
alaVrConfigDvmrpStatusControls the load status of DVMRP on this router.
Loaded(1) is the only valid Set value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.7 |
alaVrConfigRipngStatusControls the load status of Ripng on this router.
Loaded(1) is the only valid Set value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.8 |
alaVrConfigOspf3StatusControls the load status of OSPFv3 on this router.
Loaded(1) is the only valid Set value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.9 |
alaVrConfigMplsLdpStatusControls the load status of MPLS LDP on this router.
Loaded(1) is the only valid Set value.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.10 |
alaVrConfigVrrpStatusControls the load status of VRRP on this router.
Loaded(1) is the only valid Set value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.2.1.11 |
alaVirtualRouterProfileTableTable contains capabilities of a VRF profile. SEQUENCE OF AlaVirtualRouterProfileEntry .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3 |
alaVirtualRouterProfileEntryEach entry defines a VRF profile. AlaVirtualRouterProfileEntry .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1 |
alaVirtualRouterProfileNameThe name of the profile. SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.1 |
alaVirtualRouterProfileMaxRouteMapsThe maximum number of route-maps supported in this VRF profile.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.2 |
alaVirtualRouterProfileMaxSequencesThe maximum number of route-map sequences supported in this VRF
profile.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.3 |
alaVirtualRouterProfileMaxTlvsThe maximum number of route-map TLVs supported in this VRF profile.
TLVs are used to store match and set clauses.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.4 |
alaVirtualRouterProfileMaxAccessListsThe maximum number of route-map access-lists supported in this
VRF profile. Access-lists contain IPv4 or IPv6 addresses.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.5 |
alaVirtualRouterProfileMaxAddressBlocksThe maximum number of route-map address blocks supported in this
VRF profile. Address blocks are used to hold the access-lists
routes.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.6 |
alaVirtualRouterProfileMaxMatchInterfacesThe maximum number of route-map interfaces that can be configured
match clauses supported in this VRF profile.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.1.1.3.1.7 |
alcatelIND1VirtualRouterMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.2 |
alcatelIND1VirtualRouterMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.2.1 |
alcatelIND1VirtualRouterMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.15.1.2.2 |
More MIBs from AL-Enterprise
Browse all AL-EnterpriseMIBs →The ALCATEL-IND1-QOS-MIB enables monitoring and configuration of Quality of Service (QoS) policies, traffic shaping parameters, and access control list (ACL) filtering rules on Alcatel-Lucent network infrastructure. It provides visibility into queue depths, packet discard rates, and bandwidth allocation statistics to enforce service level agreements and traffic prioritization.
The ALCATEL-IND1-SERVICE-MGR-MIB provides configuration parameters for the Alcatel-Lucent service manager feature, enabling the management of service provisioning, activation, and lifecycle states on carrier-grade network elements. This module facilitates the monitoring of service instance attributes and operational status to ensure correct delivery of managed services across the infrastructure.
The ALCATEL-IND1-FIPS-MIB module enables SNMP-based monitoring of MAC address learning tables and forwarding database states on Alcatel-Lucent Birds of Prey series network switches. It provides enterprise-specific access to layer 2 switching metrics, including learned MAC addresses and their associated port bindings, for traffic analysis and security auditing.
The ALCATEL-IND1-BGP-MIB enables SNMP-based monitoring and configuration of Border Gateway Protocol (BGP) parameters on Alcatel-Lucent network devices, specifically tracking BGP session states, neighbor relationships, and protocol-specific counters. This module provides visibility into the operational status and performance metrics of BGP routing processes to facilitate network troubleshooting and policy enforcement.
The ALCATEL-IND1-DEVICES MIB defines SNMP Object Identifiers for monitoring the physical inventory, chassis status, and module states of Alcatel-Lucent OmniSwitch 4000, 7000, 8000, and 9000 series networking hardware. It enables network management systems to retrieve device topology data, component presence, and hardware health indicators specific to these enterprise switching platforms.
The ALCATEL-IND1-AAA-MIB provides SNMP access to monitor and manage Authentication, Authorization, and Accounting (AAA) subsystem metrics on Alcatel-Lucent "Birds of Prey" network hardware, specifically tracking user session states, authentication failures, and accounting records.