ALCATEL-IND1-UDLD-MIB
The ALCATEL-IND1-UDLD-MIB enables SNMP monitoring of Unidirectional Link Detection (UDLD) session states and link status on Alcatel-Lucent "Birds of Prey" line cards to detect and administratively disable unidirectional physical layer failures.
Imported Objects
Objects
42 total| Object Name |
|---|
alcatelIND1UDLDMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
UDLD for detection and disabling unidirectional links.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.44.1 |
alcatelIND1UDLDMIBObjectsBranch For UDLD
Subsystem Managed Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.44.1.1 |
alaUdldGlobalStatusThis variable is used to enable or diable UDLD on the switch.
The value enable (1) indicates that UDLD should be enabled on
the switch. The value disable (2) is used to disable UDLD on
the switch. By default, UDLD is disabled on the switch.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.1 |
alaUdldGlobalClearStatsDefines the global clear statistics control for UDLD.
The value reset (1) indicates that UDLD should clear all
statistic counters related to all ports in the system.
By default, this object contains a zero value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.2 |
alaUdldGlobalConfigUdldModeDefines the mode of operation of the UDLD protocol on the interface.
normal - The UDLD state machines participates normally in UDLD protocol
exchanges. The protocol determination at the end of detection
process is always based upon information received in UDLD messages.
aggressive - UDLD will shut down all port even in case it loses bidirectional
connectivity with the neighbor for a defined period of time.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.3 |
alaUdldGlobalConfigUdldProbeIntervalTimerMaximum period of time after which the Probe message is expected
from the neighbor. The range supported is 7-90 seconds.rw Unsigned32 ( 7 .. 90 ) UNITS "seconds" .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.4 |
alaUdldGlobalConfigUdldDetectionPeriodTimerMaximum period of time before which detection of neighbor is expected.
If Reply to the Sent Echo message/(s) is not received before, the
timer for detection period expires, the link is detected as faulty and the
associated port state is marked Undetermined/Shutdown (depending upon the
UDLD operation-mode is Normal/Aggressive).rw Unsigned32 (4 .. 15) UNITS "seconds" .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.5 |
udldPortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.6 |
alaUdldPortConfigTableA table containing UDLD port configuration information. SEQUENCE OF AlaUdldPortConfigEntry .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.6.1 |
alaUdldPortConfigEntryA UDLD port configuration entry. AlaUdldPortConfigEntry .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.6.1.1 |
alaUdldPortConfigIfIndexThe ifindex of the port on which UDLD is running InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.6.1.1.1 |
alaUdldPortConfigUdldStatusThis variable is used to enable or diable UDLD on the interface.
The value enable (1) indicates that UDLD should be enabled on
the interface. The value disable (2) is used to disable UDLD on
the interface. By default, UDLD is disabled on the interface.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.6.1.1.2 |
alaUdldPortConfigUdldModeDefines the mode of operation of the UDLD protocol on the interface.
normal - The UDLD state machines participates normally in UDLD protocol
exchanges. The protocol determination at the end of detection
process is always based upon information received in UDLD messages.
aggressive - UDLD will shut down a port even in case it loses bidirectional
connectivity with the neighbor for a defined period of time.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.6.1.1.3 |
alaUdldPortConfigUdldProbeIntervalTimerMaximum period of time after which the Probe message is expected
from the neighbor. The range supported is 7-90 seconds.rw Unsigned32 ( 7 .. 90 ) UNITS "seconds" .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.6.1.1.4 |
alaUdldPortConfigUdldDetectionPeriodTimerMaximum period of time before which detection of neighbor is expected.
If Reply to the Sent Echo message/(s) is not received before, the
timer for detection period expires, the link is detected as faulty and the
associated port state is marked Undetermined/Shutdown (depending upon the
UDLD operation-mode is Normal/Aggressive).rw Unsigned32 (4 .. 15) UNITS "seconds" .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.6.1.1.5 |
alaUdldPortConfigUdldOperationalStatusThe state of the interface as determined by UDLD operation.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.6.1.1.6 |
udldPortStats OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7 |
alaUdldPortStatsTableA table containing UDLD statistics information. SEQUENCE OF AlaUdldPortStatsEntry .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7.1 |
alaUdldPortStatsEntryA UDLD Statistics entry (per port). AlaUdldPortStatsEntry .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7.1.1 |
alaUdldPortStatsIfIndexThe ifindex of the port on which UDLD is running InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7.1.1.1 |
alaUdldNumUDLDNeighborsThis object gives the number of neighbors for the interface.ro Unsigned32 ( 0 .. 128 ) .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7.1.1.2 |
alaUdldPortStatsClearReset all statistics parameters corresponding to this port.
By default, this objects contains a zero value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7.1.1.3 |
alaUdldPortNumProbeSentNumber of Probe message sent by a port.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7.1.1.4 |
alaUdldPortNumEchoSentNumber of Echo message sent by a port.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7.1.1.5 |
alaUdldPortNumInvalidRcvdNumber of Invalid message received by a port.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7.1.1.6 |
alaUdldPortNumFlushRcvdNumber of UDLD-Flush message received by a port.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7.1.1.7 |
udldPortNeighborStats OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.8 |
alaUdldPortNeighborStatsTableUDLD port's PDU related statistics for a neighbor. SEQUENCE OF AlaUdldPortNeighborStatsEntry .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.8.1 |
alaUdldPortNeighborStatsEntryA UDLD Statistics entry (per port, per neighbor). AlaUdldPortNeighborStatsEntry .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.8.1.1 |
alaUdldPortNeighborStatsIfIndexThe ifindex of the port on which UDLD is running InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.8.1.1.1 |
alaUdldNeighborIfIndexThe index of the neighbor to which the Statistics belong Unsigned32 ( 1 .. 128 ) .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.8.1.1.2 |
alaUdldNeighborNameThe name of the neighborro SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.8.1.1.3 |
alaUdldNumHelloRcvdThis object gives the number of hello messages recieved from the neighbor for this interface.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.8.1.1.4 |
alaUdldNumEchoRcvdThis object gives the number of echo messages received from the neighbor for this interface.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.8.1.1.5 |
alaUdldPrevStateThe previous UDLD state of the Port.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.9 |
alaUdldCurrentStateThe current UDLD state of the Port.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.10 |
alaUdldPortIfIndexThe ifindex of the port on which UDLD trap is raisedro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.44.1.1.11 |
alcatelIND1UDLDMIBConformanceBranch for UDLD Module MIB Subsystem Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.44.1.2 |
alcatelIND1UDLDMIBGroupsBranch for UDLD Module MIB Subsystem Units of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.44.1.2.1 |
alcatelIND1UDLDMIBCompliancesBranch for UDLD Module MIB Subsystem Compliance Statements. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.44.1.2.2 |
alaUdldEvents OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.44.1.3 |
udldStateChangeThe UDLD-state of port has changed. Notify the user by
raising the Trap. Notify the Management Entity the previous
UDLD-state and UDLD-Current. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.44.1.3.0.1 |
More MIBs from AL-Enterprise
Browse all AL-EnterpriseMIBs →The ALCATEL-IND1-QOS-MIB enables monitoring and configuration of Quality of Service (QoS) policies, traffic shaping parameters, and access control list (ACL) filtering rules on Alcatel-Lucent network infrastructure. It provides visibility into queue depths, packet discard rates, and bandwidth allocation statistics to enforce service level agreements and traffic prioritization.
The ALCATEL-IND1-SERVICE-MGR-MIB provides configuration parameters for the Alcatel-Lucent service manager feature, enabling the management of service provisioning, activation, and lifecycle states on carrier-grade network elements. This module facilitates the monitoring of service instance attributes and operational status to ensure correct delivery of managed services across the infrastructure.
The ALCATEL-IND1-FIPS-MIB module enables SNMP-based monitoring of MAC address learning tables and forwarding database states on Alcatel-Lucent Birds of Prey series network switches. It provides enterprise-specific access to layer 2 switching metrics, including learned MAC addresses and their associated port bindings, for traffic analysis and security auditing.
The ALCATEL-IND1-BGP-MIB enables SNMP-based monitoring and configuration of Border Gateway Protocol (BGP) parameters on Alcatel-Lucent network devices, specifically tracking BGP session states, neighbor relationships, and protocol-specific counters. This module provides visibility into the operational status and performance metrics of BGP routing processes to facilitate network troubleshooting and policy enforcement.
The ALCATEL-IND1-DEVICES MIB defines SNMP Object Identifiers for monitoring the physical inventory, chassis status, and module states of Alcatel-Lucent OmniSwitch 4000, 7000, 8000, and 9000 series networking hardware. It enables network management systems to retrieve device topology data, component presence, and hardware health indicators specific to these enterprise switching platforms.
The ALCATEL-IND1-AAA-MIB provides SNMP access to monitor and manage Authentication, Authorization, and Accounting (AAA) subsystem metrics on Alcatel-Lucent "Birds of Prey" network hardware, specifically tracking user session states, authentication failures, and accounting records.