ALCATEL-IND1-TRAP-MGR-MIB
The ALCATEL-IND1-TRAP-MGR-MIB defines the enterprise-specific SNMP trap definitions for the Trap Manager Subsystem within the Alcatel-Lucent "Birds Of Prey" product line, enabling the transmission of asynchronous event notifications such as link state changes, hardware failures, and system alarms. This module serves as the standardized interface for network management stations to receive and process critical fault and status alerts generated by Alcatel-Lucent routing and switching infrastructure.
Imported Objects
Objects
47 total| Object Name |
|---|
alcatelIND1TrapMgrMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Trap Manager Subsystem.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.2.1 |
IMPORTSThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Trap Manager Subsystem.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE Unknown .1.3.6.1.4.1.6486.801.1.2.1.2.1 |
alcatelIND1TrapMgrMIBNotificationsBranch For TrapMgr MIB Subsystem Notifications. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.2.1.0 |
trapAbsorptionTrapThe absorption Trap is sent when a trap has been
absorbed at least once. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.2.1.0.1 |
alcatelIND1TrapMgrMIBObjectsBranch For Trap Manager Subsystem Managed Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.2.1.1 |
trapMgt OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1 |
trapConfigTableThe trap configuration table. SEQUENCE OF TrapConfigEntry .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.1 |
trapConfigEntryA trap configuration entry. TrapConfigEntry .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.1.1 |
trapIndexTrap identifier.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.1.1.1 |
trapNameTrap name.ro SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.1.1.2 |
trapFamilyTrap family name.ro SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.1.1.3 |
trapAbsorbPeriodat maximum, one instance of this trap
is sent out within the period.
value 0 : the trap is not absorbed.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.1.1.4 |
trapStationTableA list of management stations. SEQUENCE OF TrapStationEntry .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.2 |
trapStationEntryA management station entry. TrapStationEntry .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.2.1 |
trapStationIPThe IP address of this management entity.ro IpAddress .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.2.1.1 |
trapStationPortThe UDP port used by this management entity.
This defaults to the SNMP-TRAP port 162.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.2.1.2 |
trapStationRowStatusReading or writting values :
- active (1) : traps enabled to the station
- notInService (2) : traps disabled to the station
Only reading values :
- notReady (3) : missing parameters for the station
Only writting values :
- createAndGo (4) : to create an active station
- createAndWait (5) : to create a notInService station
- destroy (6) : to remove a station.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.2.1.3 |
trapStationProtocolThe type of protocol used to send the traps
to the station.
The different values are :
v1 : the traps are sent using SNMPv1.
v2 : the traps are sent using SNMPv2.
v3 : the traps are sent using SNMPv3.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.2.1.4 |
trapStationUserUser name used to send the trap to the station.
This name must correspond to an existing user
account name.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.2.1.5 |
trapStationReplayThe replay value. The switch is required
to send the last known traps for this station
from the replay value.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.2.1.6 |
trapStationNextSeqThe sequence number of the next trap generated
for this station.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.2.1.7 |
trapFilterTableThe trap filtering table for each individual trap. SEQUENCE OF TrapFilterEntry .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.3 |
trapFilterEntryA trap filter entry. TrapFilterEntry .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.3.1 |
trapFilterStatusFor the individual filtering :
on : the filter is activated, the traps identified
by trapFilterId can not be sent to the SNMP
manager identified by trapStationIP.
off : no filter is activated.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.3.1.1 |
trapAbsorptionenable : the trap absorption service is enabled
disable : the trap absorption service is disabled.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.4 |
trapToWebViewenable : the traps are forwarded to WebView
disable : the traps are not forwarded to WebView.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.5 |
alaTrapInetStationTableA list of management stations. SEQUENCE OF AlaTrapInetStationEntry .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6 |
alaTrapInetStationEntryA management station entry. AlaTrapInetStationEntry .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6.1 |
alaTrapInetStationIPTypeThe value of alaTrapInetStationIPType indicates the IP
address type for alaTrapInetStationIP. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6.1.1 |
alaTrapInetStationIPThe IP address of this management entity. The address type of
alaTrapInetStationIP is indicated by alaTrapInetStationIPType. InetAddress .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6.1.2 |
alaTrapInetStationPortThe UDP port used by this management entity.
This defaults to the SNMP-TRAP port 162.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6.1.3 |
alaTrapInetStationRowStatusReading or writting values :
- active (1) : traps enabled to the station
- notInService (2) : traps disabled to the station
Only reading values :
- notReady (3) : missing parameters for the station
Only writting values :
- createAndGo (4) : to create an active station
- createAndWait (5) : to create a notInService station
- destroy (6) : to remove a station.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6.1.4 |
alaTrapInetStationProtocolThe type of protocol used to send the traps
to the station.
The different values are :
v1 : the traps are sent using SNMPv1.
v2 : the traps are sent using SNMPv2.
v3 : the traps are sent using SNMPv3.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6.1.5 |
alaTrapInetStationUserUser name used to send the trap to the station.
This name must correspond to an existing user
account name.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6.1.6 |
alaTrapInetStationReplayThe replay value. The switch is required
to send the last known traps for this station
from the replay value.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6.1.7 |
alaTrapInetStationNextSeqThe sequence number of the next trap generated
for this station.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6.1.8 |
alaTrapInetFilterTableThe trap filtering table for each individual trap. SEQUENCE OF AlaTrapInetFilterEntry .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.7 |
alaTrapInetFilterEntryA trap filter entry. AlaTrapInetFilterEntry .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.7.1 |
alaTrapInetFilterStatusFor the individual filtering :
on : the filter is activated, the traps identified
by trapFilterId can not be sent to the SNMP
manager identified by alaTrapInetStationIP.
off : no filter is activated.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.7.1.1 |
trapNotif OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.3 |
trapAbsorStampThe time stamp of the absorbed trap.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.3.1 |
trapAbsorTrapIdThe trap identifier of the absorbed trap.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.3.2 |
trapAbsorCounterThe number of the iterations of the absorbed trap.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.3.3 |
trapAbsorTimeThe time stamp of the last iteration.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.2.1.1.3.4 |
alcatelIND1TrapMgrMIBConformanceBranch For Trap Manager Subsystem Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.2.1.2 |
alcatelIND1TrapMgrMIBGroupsBranch For Trap Manager Subsystem Units Of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.2.1.2.1 |
alcatelIND1TrapMgrMIBCompliancesBranch For SNMP Agent Subsystem Compliance Statements. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.2.1.2.2 |
More MIBs from AL-Enterprise
Browse all AL-EnterpriseMIBs →The ALCATEL-IND1-QOS-MIB enables monitoring and configuration of Quality of Service (QoS) policies, traffic shaping parameters, and access control list (ACL) filtering rules on Alcatel-Lucent network infrastructure. It provides visibility into queue depths, packet discard rates, and bandwidth allocation statistics to enforce service level agreements and traffic prioritization.
The ALCATEL-IND1-SERVICE-MGR-MIB provides configuration parameters for the Alcatel-Lucent service manager feature, enabling the management of service provisioning, activation, and lifecycle states on carrier-grade network elements. This module facilitates the monitoring of service instance attributes and operational status to ensure correct delivery of managed services across the infrastructure.
The ALCATEL-IND1-FIPS-MIB module enables SNMP-based monitoring of MAC address learning tables and forwarding database states on Alcatel-Lucent Birds of Prey series network switches. It provides enterprise-specific access to layer 2 switching metrics, including learned MAC addresses and their associated port bindings, for traffic analysis and security auditing.
The ALCATEL-IND1-BGP-MIB enables SNMP-based monitoring and configuration of Border Gateway Protocol (BGP) parameters on Alcatel-Lucent network devices, specifically tracking BGP session states, neighbor relationships, and protocol-specific counters. This module provides visibility into the operational status and performance metrics of BGP routing processes to facilitate network troubleshooting and policy enforcement.
The ALCATEL-IND1-DEVICES MIB defines SNMP Object Identifiers for monitoring the physical inventory, chassis status, and module states of Alcatel-Lucent OmniSwitch 4000, 7000, 8000, and 9000 series networking hardware. It enables network management systems to retrieve device topology data, component presence, and hardware health indicators specific to these enterprise switching platforms.
The ALCATEL-IND1-AAA-MIB provides SNMP access to monitor and manage Authentication, Authorization, and Accounting (AAA) subsystem metrics on Alcatel-Lucent "Birds of Prey" network hardware, specifically tracking user session states, authentication failures, and accounting records.