Home/Catalog/ALCATEL-IND1-TIMETRA-SAP-MIB

ALCATEL-IND1-TIMETRA-SAP-MIB

AI MIB Summary

The ALCATEL-IND1-TIMETRA-SAP-MIB enables SNMP-based provisioning and monitoring of Service Access Point (SAP) configurations, session states, and traffic statistics on Alcatel-Lucent 7x50 Service Router systems. It facilitates the management of Ethernet service instances, including port binding, VLAN tagging, and QoS parameters, to ensure correct service delivery across the carrier-grade network infrastructure.

This document is the SNMP MIB module to manage and provision the various services of the Alcatel 7x50 SR system. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
timetraSvcSapMIBModule.1.3.6.1.4.1.6527.1.1.3.55
727
Objects
Active
Status
11
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-CONF
SNMPv2-TC
IF-MIB
INET-ADDRESS-MIB
ATM-TC-MIB
ALCATEL-IND1-TIMETRA-TC-MIB
ALCATEL-IND1-TIMETRA-SERV-MIB
ALCATEL-IND1-TIMETRA-GLOBAL-MIB
ALCATEL-IND1-TIMETRA-QOS-MIB
ALCATEL-IND1-TIMETRA-FILTER-MIB

Objects

727 total
Object Name
timetraSvcSapMIBModuleThis document is the SNMP MIB module to manage and provision the various services of the Alcatel 7x50 SR system. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY
.1.3.6.1.4.1.6527.1.1.3.55
tmnxSapConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.3.1.1.4.3
tmnxSapCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.3.1.1.4.3.1
tmnxSap7450V6v0ComplianceThe compliance statement for management of services SAPs on Alcatel 7450 ESS series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.1.100
tmnxSap7750V6v0ComplianceThe compliance statement for management of services SAPs on Alcatel 7750 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.1.101
tmnxSap7710V6v0ComplianceThe compliance statement for management of services SAPs on Alcatel 7710 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.1.102
tmnxSapGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.3.1.1.4.3.2
tmnxSapV6v0GroupThe group of objects supporting management of Sap general capabilities on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.100
tmnxSapTlsV6v0GroupThe group of objects supporting management of Sap TLS capabilities on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.101
tmnxSapAtmV6v0GroupThe group of objects supporting management of Sap ATM capabilities on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.102
tmnxSapBaseV6v0GroupThe group of objects supporting management of Sap Base capabilities on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.103
tmnxSapQosV6v0GroupThe group of objects supporting management of Sap Ingress/Egress QoS capabilities on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.104
tmnxSapStaticHostV6v0GroupThe group of objects supporting management of Sap static host capabilities on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.105
tmnxSapDhcpV6v0GroupThe group of objects supporting management of Sap TLS DHCP capabilities on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.106
tmnxSapPortIdV6v0GroupThe group of objects supporting management of Sap Port ID capabilities on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.107
tmnxSapSubMgmtV6v0GroupThe group of objects supporting management of Sap Sub-management capabilities on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.108
tmnxSapMstiV6v0GroupThe group of objects supporting management of Sap TLS MSTI capabilities on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.109
tmnxSapIppipeV6v0GroupThe group of objects supporting management of Sap I-Pipe capabilities on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.110
tmnxSapPolicyV6v0GroupThe group of objects supporting management of Sap ingress/egress capabilities on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.111
tmnxSapCemV6v0GroupThe group of objects supporting management of Sap Cem capabilities on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.112
tmnxSapL2ptV6v0GroupThe group of objects supporting management of Sap TLS L2pt capabilities on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.113
tmnxSapMsapV6v0GroupThe group of objects supporting management of managed SAP capabilities on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.114
tmnxSapMrpV6v0GroupThe group of objects supporting management of Sap MRP capabilities on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.115
tmnxTlsMsapPppoeV6v0GroupThe group of objects supporting PPPOE on Managed SAPs feature on the Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.117
tmnxSapIpV6FilterV6v0GroupThe group of objects supporting management of Sap Ingress Policy capabilities on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.118
tmnxSapBsxV6v0GroupThe group of objects supporting management of BSX (Application Assurance) capabilities on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.119
tmnxSapNotificationObjV6v0GroupThe group of objects supporting management of notifications on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.200
tmnxSapObsoletedV6v0GroupThe group of obsolete objects for the services feature on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.300
tmnxSapNotifyGroupThe group of obsolete notifications for the Sap feature on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.400
tmnxSapCemNotificationV6v0GroupThe group of notifications supporting the CEM Sap feature on Alcatel 7710 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.401
tmnxSapObsoletedNotifyGroupThe group of obsolete notifications for the Sap feature on Alcatel 7x50 SR series systems.
Unknown
.1.3.6.1.4.1.6527.3.1.1.4.3.2.402
tmnxSapObjs
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.3.1.2.4.3
sapNumEntriesThe current number of SAPs configured in this device.ro
Integer32
.1.3.6.1.4.1.6527.3.1.2.4.3.1
sapBaseInfoTableA table that contains basic SAP information.
SEQUENCE OF SapBaseInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.2
sapBaseInfoEntryInformation about a specific SAP.
SapBaseInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1
sapPortIdThe ID of the access port where this SAP is defined.ro
TmnxPortID (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.1
sapEncapValueThe value of the label used to identify this SAP on the access port specified by sapPortId.ro
TmnxEncapVal (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.2
sapRowStatusThis object indicates the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.3
sapTypeThis object indicates the type of service where this SAP is defined.ro
ServType (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.4
sapDescriptionGeneric information about this SAP.rw
ServObjDesc (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.5
sapAdminStatusThe desired state of this SAP.rw
ServiceAdminStatus (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.6
sapOperStatusThe value of the object sapOperStatus indicates the operating state of this SAP.ro
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.7
sapIngressQosPolicyIdThe value of the object sapIngressQosPolicyId specifies the row index in the tSapIngressTable corresponding to this ingress QoS policy, or one if no policy is specified. The value 0 is needed for mirror SAPs that cannot have a qos policy assigned.rw
TSapIngressPolicyID (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.8
sapIngressMacFilterIdThe value of the object sapIngressMacFilterId specifies the row index in the tMacFilterTable corresponding to this ingress filter, or zero if no filter is specified.rw
TFilterID (ALCATEL-IND1-TIMETRA-FILTER-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.9
sapIngressIpFilterIdThe value of the object sapIngressIpFilterId specifies the row index in the tIPFilterTable corresponding to this ingress filter, or zero if no filter is specified.rw
TFilterID (ALCATEL-IND1-TIMETRA-FILTER-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.10
sapEgressQosPolicyIdThe row index in the tSapEgressTable corresponding to this egress QoS policy, or one if no policy is specified.rw
TSapEgressPolicyID (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.11
sapEgressMacFilterIdThe row index in the tMacFilterTable corresponding to this egress filter, or zero if no filter is specified.rw
TFilterID (ALCATEL-IND1-TIMETRA-FILTER-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.12
sapEgressIpFilterIdThe row index in the tIPFilterTable corresponding to this egress filter, or zero if no filter is specified.rw
TFilterID (ALCATEL-IND1-TIMETRA-FILTER-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.13
sapMirrorStatusThis object specifies whether traffic mirroring has been enabled on this SAP.ro
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.14
sapIesIfIndexWhen the value of sapType is 'ies' this object specifies the index of the IES interface where this SAP is defined. The value of this object can be set only when the row is created and cannot be changed while the row status is 'active'. This object is otherwise not significant and should have the value zero.rw
InterfaceIndexOrZero (IF-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.15
sapLastMgmtChangeThe value of sysUpTime at the time of the most recent management-initiated change to this SAP.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.16
sapCollectAcctStatsWhen the value of this object is 'true' the agent collects accounting statistics on this SAP.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.17
sapAccountingPolicyIdThis object specifies the policy to use to collect accounting statistics on this SAP. The value zero indicates that the agent should use the default accounting policy, if one exists.rw
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.18
sapVpnIdThe VPN ID of the associated service.ro
VpnId (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.19
sapCustIdThe Customer ID of the associated service.ro
TmnxCustId (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.20
sapCustMultSvcSiteThe value of this object, when not null, indicates the Multi-Service Site this SAP is a member of. This information is used to configure the ingress and egress QoS schedulers for this SAP.rw
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.21
sapIngressQosSchedulerPolicyThis object can be set only when sapCustMultSvcSite is null. It indicates the ingress QoS scheduler for this SAP.rw
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.22
sapEgressQosSchedulerPolicyThis object can be set only when sapCustMultSvcSite is null. It indicates the egress QoS scheduler for this SAP.rw
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.23
sapSplitHorizonGrpThis object specifies the name of the split-horizon group where the SAP belongs to. This object can be set only at the time the row is created. Per default a SAP does not belong to any split-horizon group. The name specified must correspond to an existing split- horizon group in the TLS service where this SAP is defined.rw
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.24
sapIngressSharedQueuePolicyThis object indicates the ingress shared queue policy used by this SAP. When the value of this object is null it means that the SAP will use individual ingress QoS queues, instead of the shared ones.rw
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.25
sapIngressMatchQinQDot1PBitsThis object applies only to SAP's defined on a port configured for qinq service encapsulation. It indicates which 802.1P bits will be used to match a QoS or a MAC filter policy when a double-tagged frame is received on this SAP.rw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.26
sapOperFlagsThis object specifies all the conditions that affect the operating status of this SAP.ro
Bits
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.27
sapLastStatusChangeThe value of sysUpTime at the time of the most recent operating status change to this SAP.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.28
sapAntiSpoofingThe value of the object sapAntiSpoofing specifies the type of anti-spoof filtering applicable on this SAP. 'nextHopIpAndMacAddr (4)' is not supported on SR-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'.rw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.29
sapIngressIpv6FilterIdThe value of the object sapIngressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this ingress ipv6 filter, or zero if no ipv6 filter is specified.rw
TFilterID (ALCATEL-IND1-TIMETRA-FILTER-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.30
sapEgressIpv6FilterIdThe value of the object sapEgressIpv6FilterId specifies the row index in the tIPv6FilterTable corresponding to this egress ipv6 filter, or zero if no ipv6 filter is specified.rw
TFilterID (ALCATEL-IND1-TIMETRA-FILTER-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.31
sapTodSuiteThe value of the object sapTodSuite specifies the Time of Day (ToD) suite to be applied on this SAP. An empty string indicates that no ToD suite is applied on this SAP. A set request will only be allowed, if the indicated suite is defined in TIMETRA-SCHEDULER-MIB::tmnxTodSuiteTable.rw
TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.32
sapIngUseMultipointSharedWhen the value of sapIngressSharedQueuePolicy is not null, the value of the object sapIngUseMultipointShared specifies whether this SAP uses the multipoint-shared queues of the shared policy.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.33
sapEgressQinQMarkTopOnlyWhen the encapsulation type of the access port where this SAP is defined is qinq, the value of the object sapEgressQinQMarkTopOnly specifies which P-bits to mark during packet egress. When the value is false both set of P-bits are marked. When the value is true, only the P-bits in the top Q-tag are marked.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.34
sapEgressAggRateLimitThe value of the object sapEgressAggRateLimit specifies the maximum total rate of all egress queues for this SAP. The value '-1' means that there is no limit.rw
TPortSchedulerPIR UNITS "kbps"
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.35
sapEndPointThe value of the object sapEndPoint specifies the service endpoint to which this SAP is attached. The svcId of the SAP MUST match the svcId of the service endpoint.rw
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.36
sapIngressVlanTranslationThe value of sapIngressVlanTranslation specifies the desired Ingress Vlan Translation. A value of 'vlanId' specifies that the value of sapIngressVlanTranslationId is to be used to overwrite the preserved VLAN id in the packet. A value of 'copyOuter' specifies that the outer VLAN id should be used to overwrite the preserved VLAN id in the packet. An 'inconsistentValue' error is returned when an attempt is made to set the value of sapIngressVlanTranslation to 'vlanId' and sapIngressVlanTranslationId is set to '-1'.rw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.37
sapIngressVlanTranslationIdThe value of sapIngressVlanTranslationId specifies the VLAN id to be used to overwrite the preserved VLAN id in the packet. An 'inconsistentValue' error is returned when an attempt is made to set the value of sapIngressVlanTranslationId to other than '-1' and sapIngressVlanTranslation is not set to 'vlanId'.rw
Integer32 (-1|0..4094)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.38
sapSubTypeThe value of the object sapSubType indicates the sub-type for this SAP. A value of 'regular' indicates a standard SAP. A value of 'capture' specifies a capturing SAP in which triggering packets will be sent to the CPM. Non-triggering packets captured by the 'capture' SAP will be dropped. A value of 'managed' indicates a managed SAP which was created dynamically after receiving triggering packets on a SAP with a sapSubType value of 'capture'. Entries with a value of 'managed' are not user editable and are not maintained in the configuration file. Whereas any of the three values may be returned in in response to an SNMP GET request, only two values may be specified in an SNMP SET request: 'regular' and 'capture'. An attempt to specify a value of 'managed' in an SNMP SET request will fail with an error of 'wrongValue'. The value of this object cannot be changed after creation.rw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.39
sapCpmProtPolicyIdThe value of sapCpmProtPolicyId associates a CPM Protection policy with a SAP. A value of zero (0) specifies that no CPM Protection policy is associated with this SAP. A value of one (1) specifies that the default CPM Protection policy is associated with this SAP. If no value for sapCpmProtPolicyId is specified when the sapBaseInfoEntry is created, the system assigns a default value as follows: if the system creates a corresponding entry in the sapSubMgmtInfoTable, the default value is 'one'; otherwise, the default value is 'zero'. This means that all SAP's that support Enhanced Subscriber Management get a default value of 'one'. If a SAP would get a default value of 'one', it is not allowed to set the value of sapCpmProtPolicyId to 'zero'. If a SAP would get a default value of 'zero', it is not allowed to modify the value of sapCpmProtPolicyId. This object is not supported on SR-1 and ESS-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.rw
TCpmProtPolicyID (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.40
sapCpmProtMonitorMacThe value of sapCpmProtMonitorMac specifies whether the tmnxCpmProtPolPerSrcRateLimit of the CPM Protection policy must be applied. If the value of sapCpmProtMonitorMac is 'true', the per-source rate limit must be applied. If the value of sapCpmProtPolicyId is equal to zero (0), the value of sapCpmProtMonitorMac is irrelevant and will be ignored. This object is not supported on SR-1 and ESS-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.41
sapEgressFrameBasedAccountingThe value of sapEgressFrameBasedAccounting specifies whether to use frame-based accounting when evaluating sapEgressAggRateLimit for all egress queues for this SAP. If the value is 'false', the default packet-based accounting method will be used.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.2.1.42
sapTlsInfoTableA table that contains TLS SAP information.
SEQUENCE OF SapTlsInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.3
sapTlsInfoEntryTLS specific information about a SAP.
SapTlsInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1
sapTlsStpAdminStatusThe value of the object sapTlsStpAdminStatus specifies whether this SAP participates in the TLS's Spanning Tree Protocol.rw
TmnxEnabledDisabled (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.1
sapTlsStpPriorityThe value of the object sapTlsStpPriority specifies the value of the port priority field which is contained in the most significant 4 bits of the 16-bit Port ID associated with this SAP. As only the most significant 4 bits of the value are used, the actual value of this object is limited to multiples of 16: e.g. the agent rounds down the value to one of: 0, 16, 32, .. , 224, 240.rw
INTEGER
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.2
sapTlsStpPortNumThe value of the object sapTlsStpPortNum specifies the value of the port number field which is contained in the least significant 12 bits of the 16-bit Port ID associated with this SAP. Values in the range 2048..4094 are automatically assigned by the agent when the SAP is created or when the value of this object is set to zero via management. Values in the range 1..2047 can be set via management, to allow this object to have a deterministic value across system reboots.rw
INTEGER
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.3
sapTlsStpPathCostThe value of the object sapTlsStpPathCost specifies the contribution of this port to the path cost of paths towards the spanning tree root which include this port.rw
INTEGER
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.4
sapTlsStpRapidStartThe value of the object sapTlsStpRapidStart specifies whether Rapid Start is enabled on this SAP. When the value is 'enabled' the Spanning Tree Protocol state transitions on this SAP are driven by the value of the 'HelloTime' instead of the value of 'ForwardDelay', thus allowing a faster transition into the forwarding state. This parameter is also referred to as 'adminEdge'.rw
TmnxEnabledDisabled (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.5
sapTlsStpBpduEncapThe value of the object sapTlsStpBpduEncap specifies the type of encapsulation used on BPDUs sent out and received on this SAP.rw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.6
sapTlsStpPortStateThe value of the object sapTlsStpPortState indicates the port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the 'broken' state.ro
TStpPortState (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.7
sapTlsStpDesignatedBridgeThe value of the object sapTlsStpDesignatedBridge indicates the Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.ro
BridgeId (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.8
sapTlsStpDesignatedPortThe value of the object sapTlsStpDesignatedPort indicates the Port Identifier of the port on the Designated Bridge for this port's segment.ro
Integer32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.9
sapTlsStpForwardTransitionsThe value of the object sapTlsStpForwardTransitions indicates the number of times this port has transitioned from the Learning state to the Forwarding state.ro
Gauge32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.10
sapTlsStpInConfigBpdusThe value of the object sapTlsStpInConfigBpdus indicates the number of Configuration BPDUs received on this SAP.ro
Gauge32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.11
sapTlsStpInTcnBpdusThe value of the object sapTlsStpInTcnBpdus indicates the number of Topology Change Notification BPDUs received on this SAP.ro
Gauge32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.12
sapTlsStpInBadBpdusThis object specifies the number of bad BPDUs received on this SAP.ro
Gauge32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.13
sapTlsStpOutConfigBpdusThe value of the object sapTlsStpOutConfigBpdus indicates the number of Configuration BPDUs sent out this SAP.ro
Gauge32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.14
sapTlsStpOutTcnBpdusThis object specifies the number of Topology Change Notification BPDUs sent out this SAP.ro
Gauge32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.15
sapTlsStpOperBpduEncapThe value of the object sapTlsStpOperBpduEncap indicates the operating encapsulation type used on BPDUs sent out and received on this SAP.ro
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.16
sapTlsVpnIdThe value of the object sapTlsVpnId indicates the VPN ID of the associated service.ro
VpnId (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.17
sapTlsCustIdThe Customer ID of the associated service.ro
TmnxCustId (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.18
sapTlsMacAddressLimitThe value of the object sapTlsMacAddressLimit specifies the maximum number of learned and static entries allowed in the FDB of this SAP. The value 0 means: no limit for this SAP. When the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is not 'c', the maximum value of sapTlsMacAddressLimit is '131071'.rw
Integer32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.19
sapTlsNumMacAddressesThe value of the object sapTlsNumMacAddresses indicates the number of MAC addresses currently present in the FDB that belong to this SAP (Both learned and static MAC addresses are counted).ro
Integer32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.20
sapTlsNumStaticMacAddressesThe value of the object sapTlsNumStaticMacAddresses indicates the number of static MAC addresses currently present in the FDB that belong to this SAP.ro
Integer32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.21
sapTlsMacLearningThe value of the object sapTlsMacLearning specifies whether the MAC learning process is enabled for this SAP. The value is ignored if MAC learning is disabled on service level.rw
TmnxEnabledDisabled (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.22
sapTlsMacAgeingThe value of the object sapTlsMacAgeing specifies whether the MAC aging process is enabled for this SAP. the value is ignored if MAC aging is disabled on service level.rw
TmnxEnabledDisabled (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.23
sapTlsStpOperEdgeThe value of the object sapTlsStpOperEdge indicates the operational value of the Edge Port parameter. The object is initialized to the value of sapTlsStpRapidStart and is set FALSE on reception of a BPDU.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.24
sapTlsStpAdminPointToPointThe value of the object sapTlsStpAdminPointToPoint specifies the administrative point-to-point status of the LAN segment attached to this sap. The value 'forceTrue' means that this port should always be treated as if it is connected to a point-to-point link. The value of 'forceFalse' means that this port should be treated as having a shared media connection.rw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.25
sapTlsStpPortRolesapTlsStpPortRole indicates the current role of the sap as defined by the Rapid Spanning Tree Protocol.ro
StpPortRole (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.26
sapTlsStpAutoEdgesapTlsStpAutoEdge specifies whether this SAP is enabled for auto-edge detection as defined by Rapid Spanning Tree Protocol.rw
TmnxEnabledDisabled (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.27
sapTlsStpOperProtocolsapTlsStpOperProtocol indicates whether stp, rstp or mstp is running on this SAP. If the protocol is not enabled on this SAP, the value notApplicable is returned.ro
StpProtocol (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.28
sapTlsStpInRstBpdusThe value of the object sapTlsStpInRstBpdus indicates the number of Rapid Spanning Tree (RST) BPDUs received on this SAP.ro
Gauge32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.29
sapTlsStpOutRstBpdusThe value of the object sapTlsStpOutRstBpdus indicates the number of Rapid Spanning Tree (RST) BPDUs sent out on this SAP.ro
Gauge32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.30
sapTlsLimitMacMoveWhen sapTlsLimitMacMove value is set to 'blockable' the agent will monitor the MAC relearn rate on this SAP, and it will block it when the re-learn rate specified by svcTlsMacMoveMaxRate is exceeded. When the value is 'nonBlockable' this SAP will not be blocked, and another blockable SAP will be blocked instead.rw
TlsLimitMacMove (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.31
sapTlsDhcpSnoopingThe value of the object sapTlsDhcpSnooping specifies whether or not DHCP packets received on this SAP will be snooped. This object was made obsolete in the 3.0 release.rwobsolete
TmnxEnabledDisabled (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.32
sapTlsMacPinningThe value of the object sapTlsMacPinning specifies whether or not MAC address pinning is active on this SAP. The value will be set by default to disabled. However for a SAP that belongs to a residential SHG, the value is set to enabled by the system, and cannot be altered by the operator. Setting the value to enable disables re-learning of MAC addresses on other SAPs or spoke-SDPs within the same VPLS; the MAC address will hence remain attached to the SAP for the duration of its age-timer. This object has effect only for MAC addresses learned via the normal MAC learning process, and not for entries learned via DHCP.rw
TmnxEnabledDisabled (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.33
sapTlsDiscardUnknownSourcewith the object sapTlsMacAddressLimit a limit can be configured for the max number of MAC addresses that will be learned on this SAP. When this limit is reached, packets with unknown source MAC address are forwarded by default. By setting sapTlsDiscardUnknownSource to enabled, packets with unknown source MAC will be dropped in stead.rw
TmnxEnabledDisabled (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.34
sapTlsMvplsPruneStateThe value of sapTlsMvplsPruneState indicates the mVPLS prune state of the SAP. The object will be set to notApplicable if the SAP is not managed by a mVPLS. If the SAP is managed the state reflects whether or not the SAP is pruned by the STP instance running in the mVPLS instance.ro
MvplsPruneState (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.35
sapTlsMvplsMgmtServiceThe value of sapTlsMvplsMgmtService indicates the service Id of the service where the STP instance is running that is managing this SAP. This object is only valid if sapTlsMvplsPruneState is different from notApplicable.ro
TmnxServId (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.36
sapTlsMvplsMgmtPortIdThe value of sapTlsMvplsMgmtPortId indicates the SAP port Id of the SAP in the mVPLS instance specified in sapTlsMvplsMgmtService that is controlling this SAP. This object is only valid if sapTlsMvplsPruneState is different from notApplicable.ro
TmnxPortID (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.37
sapTlsMvplsMgmtEncapValueThe value of sapTlsMvplsMgmtEncapValue indicates the SAP Encap value of the SAP in the mVPLS instance specified in sapTlsMvplsMgmtService that is controlling this SAP. This object is only valid if sapTlsMvplsPruneState is different from notApplicable.ro
TmnxEncapVal (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.38
sapTlsArpReplyAgentThe value of the object sapTlsArpReplyAgent specifies the status of the special ARP response mechanism in the system for ARP requests destined to static or dynamic hosts associated with this SAP. disabled: the ARP reply function is not operational enabled: the ARP reply function is enabled without subscriber identification. enabledWithSubscrIdent: the ARP reply function is enabled with subscriber identification.rw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.39
sapTlsStpExceptionThe value of the object sapTlsStpException indicates whether an STP exception condition is present on this Sap. - none : no exception condition found. - oneWayCommuniation : The neighbor RSTP peer on this link is not able to detect our presence. - downstreamLoopDetected :A loop is detected on this link.ro
StpExceptionCondition (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.40
sapTlsAuthenticationPolicyThe value of the object sapTlsAuthenticationPolicy specifies which subscriber authentication policy must be applied when a DHCP msg is received on the interface. The authentication policies must be defined in tmnxSubAuthPlcyTable. The policy will only be applied when sapTlsDhcpSnoop is enabled.rw
TPolicyStatementNameOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.41
sapTlsL2ptTerminationThe value of the object sapTlsL2ptTermination specifies whether received L2 Protocol Tunnel pdu's are terminated on this port or saprw
TmnxEnabledDisabled (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.42
sapTlsBpduTranslationThe value of the object sapTlsBpduTranslation specifies whether received L2 Protocol Tunnel pdu's are translated before being sent out on this port or saprw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.43
sapTlsStpRootGuardThe value of the object sapTlsStpRootGuard specifies whether this port is allowed to become STP root port. It corresponds to the parameter 'restrictedRole' in 802.1Q. If set, it can cause lack of spanning tree connectivity.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.44
sapTlsStpInsideRegionThe value of the object sapTlsStpInsideRegion indicates whether the network connected to the SAP is in the same MST region. It corresponds to the parameter 'infoInternal' in 802.1Q.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.45
sapTlsEgressMcastGroupThe value of the object sapTlsEgressMcastGroup specifies the Egress Multicast Group this SAP belongs to.rw
TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.46
sapTlsStpInMstBpdusThe value of the object sapTlsStpInMstBpdus indicates the number of Multiple Spanning Tree (MST) BPDUs received on this SAP.ro
Gauge32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.47
sapTlsStpOutMstBpdusThe value of the object sapTlsStpOutMstBpdus indicates the number of Multiple Spanning Tree (MST) BPDUs sent out on this SAP.ro
Gauge32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.48
sapTlsRestProtSrcMacThe value of the object sapTlsRestProtSrcMac specifies how the agent will handle relearn requests for protected MAC addresses. When the value of this object is 'true' requests to relearn a protected MAC address will be ignored. In addition, if the value of sapTlsRestProtSrcMacAction is 'disable', then the SAP where the protected source MAC was seen will be brought operationally down.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.49
sapTlsRestUnprotDstMacThe value of the object sapTlsRestUnprotDstMac specifies how the system will forward packets destined to an unprotected MAC address. When the value of this object is 'true' packets destined to an unprotected MAC address will be dropped.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.50
sapTlsStpRxdDesigBridgeThe value of the object sapTlsStpRxdDesigBridge indicates the designated Bridge Identifier in the last BPDU which was received on this SAP. It identifies which bridge is connected to the SAP.ro
BridgeId (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.51
sapTlsStpRootGuardViolationThe value of the object sapTlsStpRootGuardViolation indicates whether there is a root-guard violation at the present time. This can only happen when sapTlsStpRootGuard is set to true.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.52
sapTlsShcvActionThe value of the object sapTlsShcvAction indicates whether any action should be triggered when the connectivity check fails.rw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.53
sapTlsShcvSrcIpThe value of the object sapTlsShcvSrcIp specifies the source IP address used when doing the connectivity check. The value 0.0.0.0 indicates that no host IP address is specified.rw
IpAddress
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.54
sapTlsShcvSrcMacThe value of the object sapTlsShcvSrcMac specifies the MAC address used when doing the connectivity check. The value 0:0:0:0:0:0 indicates that no host MAC address is specified.rw
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.55
sapTlsShcvIntervalThe value of the object sapTlsShcvInterval specifies the interval in minutes between connectivity checks. Zero means no connectivity checking.rw
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.56
sapTlsMvplsMgmtMstiThe value of the object sapTlsMvplsMgmtMsti indicates the MST-instance in the mVPLS instance specified in sapTlsMvplsMgmtService that is controlling this SAP. A value of 0 indicates the CIST. This object is only valid if sapTlsMvplsPruneState is different from notApplicable.ro
MstiInstanceIdOrZero (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.57
sapTlsMacMoveNextUpTimeThe value of the object sapTlsMacMoveNextUpTime counts down the time in seconds until a SAP that has been brought down due to exceeding the TLS svcTlsMacMoveMaxRate, sapOperFlags 'relearnLimitExceeded', is automatically brought up again. When this value is 0xffff, the SAP will never be automatically brought up. The value is zero when sapOperStatus is 'up'.ro
Unsigned32 UNITS "seconds"
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.58
sapTlsMacMoveRateExcdLeftThe value of the object sapTlsMacMoveRateExcdLeft counts down the number of times this SAP can exceed the TLS svcTlsMacMoveMaxRate and still be automatically brought up.ro
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.59
sapTlsRestProtSrcMacActionThe value of the object sapTlsRestProtSrcMacAction indicates the action to take whenever a relearn request for a protected MAC is received on a restricted SAP. When the value of this object is 'disable' the SAP will be placed in the operational down state, with the operating flag 'recProtSrcMac' set. When the value of this object is 'alarm-only', the SAP will be left up and only a notification, sapReceivedProtSrcMac, will be generated.rw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.60
sapTlsL2ptForceBoundaryThe value of sapTlsL2ptForceBoundary specifies if sapTlsL2ptTermination is enforced for its managed SAP's. Setting the value of the object sapTlsL2ptForceBoundary of a SAP in a Management VPLS to `true' forces all its managed SAP's to have sapTlsL2ptTermination enabled. This value can only be `true' if the SAP belongs to a management VPLS. If this SAP has managed SAP's already with sapTlsL2ptTermination disabled, it is not allowed to set sapTlsL2ptForceBoundary to `true'.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.61
sapTlsLimitMacMoveLevelThe value of the object sapTlsLimitMacMoveLevel specifies the hierarchy in which SAPs are blocked when a MAC-move limit is exceeded. When a MAC is moving among multiple SAPs or spoke-SDPs, the SAP bind or spoke-SDP bind with the lower level is blocked first. (tertiary is the lowest)rw
TlsLimitMacMoveLevel (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.62
sapTlsBpduTransOperThe value of the object sapTlsBpduTransOper indicates the operational bpdu encapsulation used for BPDU translated frames.ro
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.63
sapTlsDefMsapPolicyThe value of sapTlsDefMsapPolicy specifies the default Managed SAP policy to use to create Managed SAPs when the response from the Radius server does not specify a Managed SAP policy. The value of sapTlsDefMsapPolicy is only valid for a SAP with a sapSubType value of 'capture'. If the value is set to a non-empty string for a SAP with a sapSubType value other than 'capture', an 'inconsistentValue' error will be returned. The Managed SAP policy must be defined in msapPlcyTable, otherwise an 'inconsistentValue' error will be returned.rw
TPolicyStatementNameOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.64
sapTlsL2ptProtocolsThe value of the object sapTlsL2ptTermination specifies which L2 Protocol Tunnel pdu's are terminated on this port or saprw
L2ptProtocols (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.65
sapTlsL2ptForceProtocolsThe value of the object sapTlsL2ptForceProtocols specifies which L2 Protocol Tunnel pdu's must be terminated by SAP's managed by this SAP. This object is only relevant if the value of the object sapTlsL2ptForceBoundary is 'true'. For every SAP managed by this SAP, each L2 protocol specified by sapTlsL2ptForceProtocols must be terminated, while other L2 protocols may or may not be terminated, depending on the value of sapTlsL2ptProtocols of that managed SAP.rw
L2ptProtocols (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.66
sapTlsPppoeMsapTriggerThe value of sapTlsPppoeMsapTrigger specifies whether the receipt of PPPoE trigger packets on a VPLS SAP with a sapSubType value of 'capture' will result in a Radius authentication that will provide a service context and the creation of a SAP with a sapSubType value of 'managed'. An attempt to set the value sapTlsPppoeMsapTrigger to 'true' on a SAP with sapSubType other than 'capture' will return an 'inconsistentValue' error.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.67
sapTlsDhcpMsapTriggerThe value of sapTlsDhcpMsapTrigger specifies whether the receipt of DHCP trigger packets on this VPLS SAP with a sapSubType value of 'capture' will result in a Radius authentication that will provide a service context and the creation of a SAP with a sapSubType value of 'managed'. An attempt to set the value sapTlsDhcpMsapTrigger to 'true' on a SAP with sapSubType other than 'capture' will return an 'inconsistentValue' error.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.68
sapTlsMrpJoinTimeThe value of sapTlsMrpJoinTime specifies a timer value in 10ths of seconds which determines the maximum rate at which attribute join messages can be sent on the SAP.rw
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.69
sapTlsMrpLeaveTimeThe value of sapTlsMrpLeaveTime specifies a timer value in 10ths of seconds which determines the amount of time a registered attribute is held in leave state before the registration is removed.rw
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.70
sapTlsMrpLeaveAllTimeThe value of sapTlsMrpLeaveAllTime specifies the a timer value in 10ths of seconds which determines the frequency where all attribute declarations on the SAP are all refreshed.rw
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.71
sapTlsMrpPeriodicTimeThe value of sapTlsMrpPeriodicTime specifies a timer value in 10ths of seconds which determines the frequency of re-transmission of attribute declarations.rw
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.72
sapTlsMrpPeriodicEnabledThe value of sapTlsMrpPeriodicEnabled specifies whether re-transmission of attribute declarations is enabled.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.3.1.73
sapAtmInfoTableA table that contains ATM SAP information.
SEQUENCE OF SapAtmInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.4
sapAtmInfoEntryInformation about a specific ATM SAP.
SapAtmInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.4.1
sapAtmEncapsulationThis object specifies the data encapsulation used over the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification.rw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.4.1.1
sapAtmIngressTrafficDescIndexThis object specifies the index of the ATM traffic descriptor in the ATM traffic data encapsulation used in for the ingress direction over the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification.rw
AtmTrafficDescrParamIndex
.1.3.6.1.4.1.6527.3.1.2.4.3.4.1.2
sapAtmEgressTrafficDescIndexThis object specifies the index of the ATM traffic descriptor in the ATM traffic data encapsulation used in for the egress direction over the AAL5 SSCS layer. The definition references RFC 2684 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification.rw
AtmTrafficDescrParamIndex
.1.3.6.1.4.1.6527.3.1.2.4.3.4.1.3
sapAtmOamAlarmCellHandlingA value of up specifies that the OAM status of a pvc affects the sap operational status and OAM AIS/RDI cell generation upon a sap operational status of down. A value of down specifies that the OAM status of a pvc will not affect the operational status of the associated sap and no OAM AIS/RDI cells are generated.rw
ServiceAdminStatus (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.4.1.4
sapAtmOamTerminateThe sapAtmOamTerminate object specifies whether this SAP will act as an OAM termination point. If enabled, OAM cells will be sunk by the SAP and can affect the SAP's operational status (if sapAtmOamAlarmCellHandling is also enabled). Otherwise the OAM cells will be passed into the APIPE service. This object is only configurable for ATM SAPs that are part of an APIPE service SDU or VCC mode. If the sapPortId belongs to an Multi-Chassis APS port, the default value is up.rw
ServiceAdminStatus (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.4.1.5
sapAtmOamPeriodicLoopbackThe sapAtmOamPeriodicLoopback object specifies whether this SAP will run periodic OAM loopbacks or not. If enabled, an ATM OAM loopback cell will be transmitted every period as configured in tAtmSysOamLoopbackPeriod. If a response is not received and tAtmSysOamRetryDown consecutive retries also result in failure, the endpoint will transition to the eteAisLoc state. Once in the eteAisLoc state, an ATM OAM loopback cell will be transmitted every period as configured in tAtmSysOamLoopbackPeriod. If a response is received for the periodic loopback and tAtmSysOamRetryUp consecutive retries also each receive a response, the endpoint will transition back to the up state. This object is only configurable on IES or VPRN service endpoints.rw
ServiceAdminStatus (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.4.1.6
sapBaseStatsTableA table that contains basic SAP statistics. In the descriptions below 'Pchip' refers to the Alcatel 7x50 SR series Packet Processing chip, while 'Qchip' refers to the Alcatel 7x50 SR series QoS Queueing Engine chip.
SEQUENCE OF SapBaseStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.6
sapBaseStatsEntryBasic statistics about a specific SAP.
SapBaseStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1
sapBaseStatsIngressPchipDroppedPacketsThe number of packets dropped by the ingress Pchip due to: SAP state, ingress MAC, IP or IPv6 filter, same segment discard, bad checksum, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.1
sapBaseStatsIngressPchipDroppedOctetsThe number of octets dropped by the ingress Pchip due to: SAP state, ingress MAC, IP or IPv6 filter, same segment discard, bad checksum, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.2
sapBaseStatsIngressPchipOfferedHiPrioPacketsThe number of high priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.3
sapBaseStatsIngressPchipOfferedHiPrioOctetsThe number of high priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.4
sapBaseStatsIngressPchipOfferedLoPrioPacketsThe number of low priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.5
sapBaseStatsIngressPchipOfferedLoPrioOctetsThe number of low priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.6
sapBaseStatsIngressQchipDroppedHiPrioPacketsThe number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.7
sapBaseStatsIngressQchipDroppedHiPrioOctetsThe number of high priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.8
sapBaseStatsIngressQchipDroppedLoPrioPacketsThe number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.9
sapBaseStatsIngressQchipDroppedLoPrioOctetsThe number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.10
sapBaseStatsIngressQchipForwardedInProfPacketsThe number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.11
sapBaseStatsIngressQchipForwardedInProfOctetsThe number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.12
sapBaseStatsIngressQchipForwardedOutProfPacketsThe number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.13
sapBaseStatsIngressQchipForwardedOutProfOctetsThe number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.14
sapBaseStatsEgressQchipDroppedInProfPacketsThe number of in-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.15
sapBaseStatsEgressQchipDroppedInProfOctetsThe number of in-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.16
sapBaseStatsEgressQchipDroppedOutProfPacketsThe number of out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.17
sapBaseStatsEgressQchipDroppedOutProfOctetsThe number of out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.18
sapBaseStatsEgressQchipForwardedInProfPacketsThe number of in-profile packets (rate below CIR) forwarded by the egress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.19
sapBaseStatsEgressQchipForwardedInProfOctetsThe number of in-profile octets (rate below CIR) forwarded by the egress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.20
sapBaseStatsEgressQchipForwardedOutProfPacketsThe number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.21
sapBaseStatsEgressQchipForwardedOutProfOctetsThe number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.22
sapBaseStatsCustIdThe Customer ID for the associated service.ro
TmnxCustId (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.23
sapBaseStatsIngressPchipOfferedUncoloredPacketsThe number of uncolored packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.24
sapBaseStatsIngressPchipOfferedUncoloredOctetsThe number of uncolored octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.25
sapBaseStatsAuthenticationPktsDiscardedThe number of DHCP packets discarded as result of authentication.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.26
sapBaseStatsAuthenticationPktsSuccessThe number of DHCP packets successfully authenticated.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.27
sapBaseStatsLastClearedTimeThe value of sapBaseStatsLastClearedTime indicates the sysUpTime when the counters in this table were last cleared.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.6.1.28
sapIngQosQueueStatsTableA table that contains ingress QoS queue SAP statistics.
SEQUENCE OF SapIngQosQueueStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.7
sapIngQosQueueStatsEntryIngress statistics about a specific SAP's QoS queue.
SapIngQosQueueStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.7.1
sapIngQosQueueIdThe index of the ingress QoS queue of this SAP.ro
TSapIngQueueId (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.7.1.1
sapIngQosQueueStatsOfferedHiPrioPacketsThe number of high priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.7.1.2
sapIngQosQueueStatsDroppedHiPrioPacketsThe number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.7.1.3
sapIngQosQueueStatsOfferedLoPrioPacketsThe number of low priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.7.1.4
sapIngQosQueueStatsDroppedLoPrioPacketsThe number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.7.1.5
sapIngQosQueueStatsOfferedHiPrioOctetsThe number of high priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.7.1.6
sapIngQosQueueStatsDroppedHiPrioOctetsThe number of high priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.7.1.7
sapIngQosQueueStatsOfferedLoPrioOctetsThe number of low priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.7.1.8
sapIngQosQueueStatsDroppedLoPrioOctetsThe number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.7.1.9
sapIngQosQueueStatsForwardedInProfPacketsThe number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.7.1.10
sapIngQosQueueStatsForwardedOutProfPacketsThe number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.7.1.11
sapIngQosQueueStatsForwardedInProfOctetsThe number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.7.1.12
sapIngQosQueueStatsForwardedOutProfOctetsThe number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.7.1.13
sapIngQosCustIdThe Customer ID for the associated service.ro
TmnxCustId (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.7.1.14
sapIngQosQueueStatsUncoloredPacketsOfferedThe number of uncolored packets offered to the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.7.1.15
sapIngQosQueueStatsUncoloredOctetsOfferedThe number of uncolored octets offered to the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.7.1.16
sapEgrQosQueueStatsTableA table that contains egress QoS queue SAP statistics.
SEQUENCE OF SapEgrQosQueueStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.8
sapEgrQosQueueStatsEntryEgress statistics about a specific SAP's QoS queue.
SapEgrQosQueueStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.8.1
sapEgrQosQueueIdThe index of the egress QoS queue of this SAP.ro
TSapEgrQueueId (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.8.1.1
sapEgrQosQueueStatsForwardedInProfPacketsThe number of in-profile packets (rate below CIR) forwarded by the egress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.8.1.2
sapEgrQosQueueStatsDroppedInProfPacketsThe number of in-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.8.1.3
sapEgrQosQueueStatsForwardedOutProfPacketsThe number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.8.1.4
sapEgrQosQueueStatsDroppedOutProfPacketsThe number of out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.8.1.5
sapEgrQosQueueStatsForwardedInProfOctetsThe number of in-profile octets (rate below CIR) forwarded by the egress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.8.1.6
sapEgrQosQueueStatsDroppedInProfOctetsThe number of in-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.8.1.7
sapEgrQosQueueStatsForwardedOutProfOctetsThe number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.8.1.8
sapEgrQosQueueStatsDroppedOutProfOctetsThe number of out-of-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.8.1.9
sapEgrQosCustIdThe Customer ID for the associated service.ro
TmnxCustId (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.8.1.10
sapIngQosSchedStatsTableA table that contains ingress QoS queue SAP statistics.
SEQUENCE OF SapIngQosSchedStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.9
sapIngQosSchedStatsEntryIngress statistics about a specific SAP's QoS queue.
SapIngQosSchedStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.9.1
sapIngQosSchedNameThe index of the ingress QoS scheduler of this SAP.
TNamedItem (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.9.1.1
sapIngQosSchedStatsForwardedPacketsThe number of forwarded packets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.9.1.2
sapIngQosSchedStatsForwardedOctetsThe number of forwarded octets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.9.1.3
sapIngQosSchedCustIdThe Customer ID for the associated service.ro
TmnxCustId (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.9.1.4
sapEgrQosSchedStatsTableA table that contains ingress QoS queue SAP statistics.
SEQUENCE OF SapEgrQosSchedStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.10
sapEgrQosSchedStatsEntryEgress statistics about a specific SAP's QoS queue.
SapEgrQosSchedStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.10.1
sapEgrQosSchedNameThe index of the egress QoS scheduler of this SAP.
TNamedItem (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.10.1.1
sapEgrQosSchedStatsForwardedPacketsThe number of forwarded packets by the egress Qchip, as determined by the SAP egress scheduler policy.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.10.1.2
sapEgrQosSchedStatsForwardedOctetsThe number of forwarded octets by the egress Qchip, as determined by the SAP egress scheduler policy.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.10.1.3
sapEgrQosSchedCustIdThe Customer ID for the associated service.ro
TmnxCustId (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.10.1.4
sapTlsManagedVlanListTableThis table is used only for SAPs that are part of a management VPLS. It indicates for each SAP the ranges of associated VLANs that will be affected when the SAP changes state.
SEQUENCE OF SapTlsManagedVlanListEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.11
sapTlsManagedVlanListEntryEach row specifies a range of VLANS associated with a SAP of a MVPLS. Ranges may contains overlapping sections only for Mvpls SAPs that belong to the same service.
SapTlsManagedVlanListEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.11.1
sapTlsMvplsMinVlanTagThe value of sapTlsMvplsMinVlanTag specifies the left bound (i.e. min. value) of a range of VLANs that are associated with the Mvpls SAP. sapTlsMvplsMinVlanTag must be smaller than (or equal to) sapTlsMvplsMaxVlanTag. Special values are: 0: this value is reserved for the null tag. 4095: this value denotes the default SAP.
Unsigned32(0 .. 4095)
.1.3.6.1.4.1.6527.3.1.2.4.3.11.1.1
sapTlsMvplsMaxVlanTagThe value of sapTlsMvplsMaxVlanTag specifies the right bound (i.e. max. value) of a range of VLANs that are associated with the Mvpls SAP. Special values are: 0: this value is reserved for the null tag. 4095: this value denotes the default SAP.
Unsigned32(0 .. 4095)
.1.3.6.1.4.1.6527.3.1.2.4.3.11.1.2
sapTlsMvplsRowStatusThe value of sapTlsMvplsRowStatus specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. A row (i.e. a range of VLAN tags) can be destroyed only if there are no SAPs defined in regular VPLSses in this range.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.11.1.3
sapAntiSpoofTableThe sapAntiSpoofTable contains information about anti-spoofing filters on a SAP.
SEQUENCE OF SapAntiSpoofEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.12
sapAntiSpoofEntryAn entry in the sapAntiSpoofTable.
SapAntiSpoofEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.12.1
sapAntiSpoofIpAddressThe value of sapAntiSpoofIpAddress indicates the IP address for which this table entry contains information.ro
IpAddress
.1.3.6.1.4.1.6527.3.1.2.4.3.12.1.1
sapAntiSpoofMacAddressThe value of sapAntiSpoofMacAddress indicates the MAC address for which this table entry contains information.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.12.1.2
sapStaticHostTableThe sapStaticHostTable is used to configure static hosts on a SAP.
SEQUENCE OF SapStaticHostEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.13
sapStaticHostEntryEach row entry represents information on a statically configured host. Entries can be created and deleted via SNMP SET operations.
SapStaticHostEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.13.1
sapStaticHostRowStatusThe value of the object sapStaticHostRowStatus controls the creation and deletion of rows in this table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.13.1.1
sapStaticHostIpAddressThe value of the object sapStaticHostIpAddress specifies the IP address associated with this static host. The value 0.0.0.0 indicates that no host IP address is specified.
IpAddress
.1.3.6.1.4.1.6527.3.1.2.4.3.13.1.2
sapStaticHostMacAddressThe value of the object sapStaticHostMacAddress specifies the MAC address associated with this static host. The value 0:0:0:0:0:0 indicates that no host MAC address is specified.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.13.1.3
sapStaticHostSubscrIdentThe value of the object sapStaticHostSubscrIdent specifies the subscriber identification for this static host.rw
DisplayString
.1.3.6.1.4.1.6527.3.1.2.4.3.13.1.4
sapStaticHostSubProfileThe value of the object sapStaticHostSubProfile specifies the subscriber profile for this static host. The specified subscriber profile needs to exists in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable.rw
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.13.1.5
sapStaticHostSlaProfileThe value of the object sapStaticHostSlaProfile specifies the SLA profile for this static host. The specified SLA profile needs to exists in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfileTable.rw
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.13.1.6
sapStaticHostShcvOperStateThe value of the object sapStaticHostShcvOperState gives the state of the subscriber host connectivity check for this static host.ro
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.13.1.7
sapStaticHostShcvChecksThe value of the object sapStaticHostShcvChecks specifies the number of connectivity checks for this static host.ro
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.13.1.8
sapStaticHostShcvRepliesThe value of the object sapStaticHostShcvReplies specifies the number of host replies for this static host.ro
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.13.1.9
sapStaticHostShcvReplyTimeThe value of the object sapStaticHostShcvReplyTime gives the timestamp of the last successful connectivity check for this static host.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.13.1.10
sapStaticHostDynMacAddressThe value of the object sapStaticHostDynMacAddress gives the MAC address learned via ARP in case this is an IP-only static host (sapStaticHostMacAddress is set to 0:0:0:0:0:0). The value 0:0:0:0:0:0 indicates that no MAC address is learned yet.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.13.1.11
sapStaticHostRetailerSvcIdThe value of the object sapStaticHostRetailerSvcId indicates the service ID of the retailer VPRN service to which this static host belongs. When this object is non zero, the static host belongs to a retailer VPRN.ro
TmnxServId (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.13.1.12
sapStaticHostRetailerIfThe value of the object sapStaticHostRetailerIf indicates the interface index of the retailer VPRN interface to which this static host belongs. When this object is non zero, the static host belongs to a retailer VPRN.ro
InterfaceIndexOrZero (IF-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.13.1.13
sapStaticHostFwdingStateThe value of sapStaticHostFwdingState indicates the forwarding state of this static host. When the value is 'outOfService', host traffic is not forwarded. When it is 'inService', host traffic is forwarded.ro
TmnxOperState (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.13.1.14
sapStaticHostAncpStringThe value of sapStaticHostAncpString specifies the ancp-string associated to this SAP host.rw
DisplayString
.1.3.6.1.4.1.6527.3.1.2.4.3.13.1.15
sapStaticHostSubIdIsSapIdThe value of the object sapStaticHostSubIdIsSapId specifies whether the SAP-id is taken as subscriber identification for this static host.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.13.1.16
sapStaticHostAppProfileThe value of sapStaticHostAppProfile specifies the application profile for this static host. The specified application profile needs to exist in the TIMETRA-BSX-MIB::tmnxBsxAppProfTable.rw
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.13.1.17
sapStaticHostIntermediateDestIdThe value of sapStaticHostIntermediateDestId specifies to which intermediate destination (for example a DSLAM) this host belongs.rw
DisplayString
.1.3.6.1.4.1.6527.3.1.2.4.3.13.1.18
sapTlsDhcpInfoTablesapTlsDhcpInfoTable contains DHCP information related to a TLS SAP. This table complements sapTlsInfoTable, and contains an entry for each Tls SAP. Rows in this table are created and deleted automatically by the system.
SEQUENCE OF SapTlsDhcpInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.14
sapTlsDhcpInfoEntryDHCP specific information for a TLS SAP.
SapTlsDhcpInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.14.1
sapTlsDhcpAdminStateThe value of the object sapTlsDhcpAdminState specifies the overall enable/disable state of all DHCP related actions on this Sap. The value 'disabled' allows the user to configure individual DHCP commands but administratively disable them.rw
TmnxEnabledDisabled (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.14.1.1
sapTlsDhcpDescriptionThe value of the object sapTlsDhcpDescription specifies a user provided description for DHCP on this Sap. It consists of any printable, seven-bit ASCII characters up to 80 characters in length.rw
ServObjDesc (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.14.1.2
sapTlsDhcpSnoopThe value of the object sapTlsDhcpSnoop specifies the enable/disable state for DHCP snooping on this Sap. Note that in order for snooping to be enabled the object sapTlsDhcpAdminState must also have the value enabled.rw
TmnxEnabledDisabled (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.14.1.3
sapTlsDhcpLeasePopulateThe value of the object sapTlsDhcpLeasePopulate specifies the maximum number of DHCP lease states allowed on this SAP.rw
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.14.1.4
sapTlsDhcpOperLeasePopulateThe value of the object sapTlsDhcpOperLeasePopulate indicates the number of DHCP lease states currently allocated on this SAP.ro
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.14.1.5
sapTlsDhcpInfoActionThe value of the object sapTlsDhcpInfoAction specifies the DHCP option reforwarding policy: 'replace' - replace existing information with configured information 'drop' - discard messages with existing relay information if the option-82 information is also present. 'keep' - retain the existing relay information.rw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.14.1.6
sapTlsDhcpCircuitIdThe value of the object sapTlsDhcpCircuitId specifies whether or not the circuit-id suboption is present, and if it is present what information goes in it: - 'none' the circuit-id suboption will not be part of the information option (Option 82). - 'asciiTuple' the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name is used. - 'vlanAsciiTuple' the format will include VLAN-id and dot1p bits in addition to what is included in ascii-tuple already. The format is supported on dot1q and qinq encapsulated ports only. Thus, when the option 82 bits are stripped, dot1p bits will be copied to the Ethernet header of an outgoing packet.rw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.14.1.7
sapTlsDhcpRemoteIdThe value of the object sapTlsDhcpRemoteId specifies what information goes into the remote-id suboption in the DHCP Relay packet. If the value of this object is set to 'none', the remote-id suboption will not be part of the information option (Option 82). If the value of this object is set to 'mac', the MAC address of the remote end is encoded in the suboption. If the value of this object is set to 'remote-id', sapTlsDhcpRemoteIdString will represent the remote-id. By default, the remote-id value is none.rw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.14.1.8
sapTlsDhcpRemoteIdStringThe value of the object sapTlsDhcpRemoteIdString specifies the remote-id. This object exists only if sapTlsDhcpRemoteId has a value of 'remote-id'.rw
DisplayString
.1.3.6.1.4.1.6527.3.1.2.4.3.14.1.9
sapTlsDhcpProxyAdminStateThe value of sapTlsDhcpProxyAdminState specifies the desired administrative state of the proxy server on this interface. Note that in order for the proxy server to be enabled, the value of sapTlsDhcpAdminState must also be 'enabled'.rw
TmnxEnabledDisabled (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.14.1.10
sapTlsDhcpProxyServerAddrThe value of sapTlsDhcpProxyServerAddr specifies the IP address which will be used as the source address of the emulated DHCP server in the context of this VPLS SAP. This address is mandatory for the proxy server capability and it should be in the context of the subnet represented by this VPLS.rw
IpAddress
.1.3.6.1.4.1.6527.3.1.2.4.3.14.1.11
sapTlsDhcpProxyLeaseTimeThe value of sapTlsDhcpProxyLeaseTime specifies in seconds how long a DHCP client is allowed to use the offered IP address. Value 0 means the lease time provided by a RADIUS or an upstream DHCP server will not be overridden. A lease time of 7 days is used when RADIUS does not provide a lease time.rw
Unsigned32 (0|300..315446399) UNITS "seconds"
.1.3.6.1.4.1.6527.3.1.2.4.3.14.1.12
sapTlsDhcpProxyLTRadiusOverrideThe value of sapTlsDhcpProxyLTRadiusOverride specifies whether or not the lease time provided by the RADIUS server is presented to the DHCP client. By default the proxy-server will always make use of sapTlsDhcpProxyLeaseTime, regardless of what lease time information is provided from the RADIUS server. When sapTlsDhcpProxyLTRadiusOverride is set to 'true', the proxy-server will use the lease time information provided by the RADIUS server, regardless of the configured one.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.14.1.13
sapTlsDhcpVendorIncludeOptionsThe value of sapTlsDhcpVendorIncludeOptions specifies what is encoded in the Alcatel vendor specific sub-option of option 82. The value of this object is only used when sapTlsDhcpInfoAction is 'replace'.rw
Bits
.1.3.6.1.4.1.6527.3.1.2.4.3.14.1.14
sapTlsDhcpVendorOptionStringThe value of sapTlsDhcpVendorOptionString specifies the string that goes into the Alcatel vendor specific sub-option of option 82. This string is only used when sapTlsDhcpInfoAction is set to 'replace'.rw
DisplayString
.1.3.6.1.4.1.6527.3.1.2.4.3.14.1.15
sapTlsDhcpStatsTablesapTlsDhcpStatsTable contains DHCP statistics related to a TLS SAP. This table complements sapTlsInfoTable, and contains an entry for each Tls SAP. Rows in this table are created and deleted automatically by the system.
SEQUENCE OF SapTlsDhcpStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.15
sapTlsDhcpStatsEntryDHCP statistics for a TLS SAP.
SapTlsDhcpStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.15.1
sapTlsDhcpStatsClntSnoopdPcktsThe value of the object sapTlsDhcpStatsClntSnoopdPckts indicates the number of DHCP client packets that have been snooped on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.15.1.1
sapTlsDhcpStatsSrvrSnoopdPcktsThe value of the object sapTlsDhcpStatsSrvrSnoopdPckts indicates the number of DHCP server packets that have been snooped on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.15.1.2
sapTlsDhcpStatsClntForwdPcktsThe value of the object sapTlsDhcpStatsClntForwdPckts indicates the number of DHCP client packets that have been forwarded on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.15.1.3
sapTlsDhcpStatsSrvrForwdPcktsThe value of the object sapTlsDhcpStatsSrvrForwdPckts indicates the number of DHCP server packets that have been forwarded on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.15.1.4
sapTlsDhcpStatsClntDropdPcktsThe value of the object sapTlsDhcpStatsClntDropdPckts indicates the number of DHCP client packets that have been dropped on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.15.1.5
sapTlsDhcpStatsSrvrDropdPcktsThe value of the object sapTlsDhcpStatsSrvrDropdPckts indicates the number of DHCP server packets that have been dropped on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.15.1.6
sapTlsDhcpStatsClntProxRadPcktsThe value of the object sapTlsDhcpStatsClntProxRadPckts indicates the number of DHCP client packets that have been proxied on this SAP based on data received from a RADIUS server.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.15.1.7
sapTlsDhcpStatsClntProxLSPcktsThe value of the object sapTlsDhcpStatsClntProxLSPckts indicates the number of DHCP client packets that have been proxied on this SAP based on a lease state. The lease itself can have been obtained from a DHCP or RADIUS server. This is the so called lease split functionality.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.15.1.8
sapTlsDhcpStatsGenReleasePcktsThe value of the object sapTlsDhcpStatsGenReleasePckts indicates the number of DHCP RELEASE messages spoofed on this SAP to the DHCP server.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.15.1.9
sapTlsDhcpStatsGenForceRenPcktsThe value of the object sapTlsDhcpStatsGenForceRenPckts indicates the number of DHCP FORCERENEW messages spoofed on this SAP to the DHCP clients.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.15.1.10
sapTlsDhcpLeaseStateTablesapTlsDhcpLeaseStateTable contains DHCP lease state info for a TLS SAP. This table complements sapTlsInfoTable, and contains an entry for each Tls SAP. Rows in this table are created and deleted automatically by the system. The content of this table is moved to the svcDhcpLeaseStateTable.obsolete
SEQUENCE OF SapTlsDhcpLeaseStateEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.16
sapTlsDhcpLeaseStateEntryDHCP Lease State information on a TLS SAP.obsolete
SapTlsDhcpLeaseStateEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.16.1
sapTlsDhcpLseStateCiAddrThe value of the object sapTlsDhcpLseStateCiAddr indicates the IP address of the DHCP lease state.obsolete
IpAddress
.1.3.6.1.4.1.6527.3.1.2.4.3.16.1.1
sapTlsDhcpLseStateChAddrThe value of the object sapTlsDhcpLseStateChAddr indicates the MAC address of the DHCP lease state.obsolete
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.16.1.2
sapTlsDhcpLseStateRemainLseTimeThe value of the object sapTlsDhcpLseStateRemainLseTime indicates the remaining lease time of the Ip address of the DHCP lease state. This object was made obsolete in the 4.0 release.roobsolete
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.16.1.3
sapTlsDhcpLseStateOption82The value of the object sapTlsDhcpLseStateOption82 indicates the content of the Option82 for this DHCP lease state. This object was made obsolete in the 4.0 release.roobsolete
OCTET STRING
.1.3.6.1.4.1.6527.3.1.2.4.3.16.1.4
sapTlsDhcpLseStatePersistKeyThe value of the object sapTlsDhcpLseStatePersistKey indicates a key value that can be used to track this lease state in the persistence file. This object was made obsolete in the 4.0 release.roobsolete
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.16.1.5
sapPortIdIngQosSchedStatsTableThe sapPortIdIngQosSchedStatsTable contains ingress QoS queue SAP statistics. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS.
SEQUENCE OF SapPortIdIngQosSchedStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.17
sapPortIdIngQosSchedStatsEntryEach entry represents the ingress statistics about a specific SAP's QoS queue. Entries are created when a scheduler policy is applied to a SAP.
SapPortIdIngQosSchedStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.17.1
sapPortIdIngQosSchedNameThe value of sapPortIdIngQosSchedName is used as an index of the ingress QoS scheduler of this SAP.
TNamedItem (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.17.1.1
sapPortIdIngPortIdThe value of sapPortIdIngPortId is used as an index of the ingress QoS scheduler of this SAP. When the SAP is an aps/ccag/lag in 'link' mode, this object is the TmnxPortID of the member-port on which the scheduler is applied.
TmnxPortID (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.17.1.2
sapPortIdIngQosSchedFwdPktsThe value of sapPortIdIngQosSchedFwdPkts indicates the number of forwarded packets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.17.1.3
sapPortIdIngQosSchedFwdOctetsThe value of sapPortIdIngQosSchedFwdOctets indicates the number of forwarded octets,as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.17.1.4
sapPortIdIngQosSchedCustIdThe value of sapPortIdIngQosSchedCustId indicates the Customer ID for the associated service.ro
TmnxCustId (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.17.1.5
sapPortIdEgrQosSchedStatsTableThe sapPortIdEgrQosSchedStatsTable contains egress QoS queue SAP statistics. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS.
SEQUENCE OF SapPortIdEgrQosSchedStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.18
sapPortIdEgrQosSchedStatsEntryEach entry represents the egress statistics about a specific SAP's QoS queue. Entries are created when a scheduler policy is applied to a SAP.
SapPortIdEgrQosSchedStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.18.1
sapPortIdEgrQosSchedNameThe value of sapPortIdEgrQosSchedName is used as an index of the egress QoS scheduler of this SAP.
TNamedItem (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.18.1.1
sapPortIdEgrPortIdThe value of sapPortIdEgrPortId is used as an index of the egress QoS scheduler of this SAP. When the SAP is an aps/ccag/lag in 'link' mode, this object is the TmnxPortID of the member-port on which the scheduler is applied.
TmnxPortID (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.18.1.2
sapPortIdEgrQosSchedFwdPktsThe value of sapPortIdEgrQosSchedFwdPkts indicates the number of forwarded packets, as determined by the SAP egress scheduler policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.18.1.3
sapPortIdEgrQosSchedFwdOctetsThe value of sapPortIdEgrQosSchedFwdOctets indicates the number of forwarded octets,as determined by the SAP egress scheduler policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.18.1.4
sapPortIdEgrQosSchedCustIdThe value of sapPortIdEgrQosSchedCustId indicates the Customer ID for the associated service.ro
TmnxCustId (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.18.1.5
sapIngQosQueueInfoTableThis table is used to override the base parameters of a queue, as defined in the associated SAP ingress QoS policy.
SEQUENCE OF SapIngQosQueueInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.19
sapIngQosQueueInfoEntryOverride values for the specified SAP ingress QoS queue. These values override the corresponding ones specified in the associated SAP ingress QoS policy.
SapIngQosQueueInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.19.1
sapIngQosQIdThe value of sapIngQosQId indicates the ID of the queue whose parameters are to be overridden.
TIngressQueueId (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.19.1.1
sapIngQosQRowStatusThe value of sapIngQosQRowStatus controls the creation and deletion of rows in this table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.19.1.2
sapIngQosQLastMgmtChangeThe value of sapIngQosQLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.19.1.3
sapIngQosQOverrideFlagsThe value of sapIngQosQOverrideFlags specifies the set of attributes whose values have been overridden via management on this queue. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's ingress QoS policy.rw
TQosQueueAttribute (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.19.1.4
sapIngQosQCBSThe value of sapIngQosQCBS specifies the amount of reserved buffer space (in kilo bytes) for this queue.rw
TBurstSize UNITS "kilo bytes"
.1.3.6.1.4.1.6527.3.1.2.4.3.19.1.5
sapIngQosQMBSThe value of sapIngQosQMBS specifies the maximum amount of buffer space (in kilo bytes) allowed for this queue.rw
TBurstSize UNITS "kilo bytes"
.1.3.6.1.4.1.6527.3.1.2.4.3.19.1.6
sapIngQosQHiPrioOnlyThe value of sapIngQosQHiPrioOnly specifies the percentage of buffer space for this queue, used exclusively by high priority packets.rw
TBurstPercentOrDefault UNITS "percent"
.1.3.6.1.4.1.6527.3.1.2.4.3.19.1.7
sapIngQosQCIRAdaptationThe value of sapIngQosQCIRAdaptation specifies the criteria to use to compute the operational CIR value for this queue, while maintaining a minimum offset.rw
TAdaptationRule (ALCATEL-IND1-TIMETRA-QOS-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.19.1.8
sapIngQosQPIRAdaptationThe value of sapIngQosQPIRAdaptation specifies the criteria to use to compute the operational PIR value for this queue, while maintaining a minimum offset.rw
TAdaptationRule (ALCATEL-IND1-TIMETRA-QOS-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.19.1.9
sapIngQosQAdminPIRThe value of sapIngQosQAdminPIR specifies the desired PIR value for this queue.rw
TPIRRate UNITS "kilo bits per second"
.1.3.6.1.4.1.6527.3.1.2.4.3.19.1.10
sapIngQosQAdminCIRThe value of sapIngQosQAdminCIR specifies the desired CIR value for this queue.rw
TCIRRate UNITS "kilo bits per second"
.1.3.6.1.4.1.6527.3.1.2.4.3.19.1.11
sapEgrQosQueueInfoTableThis table is used to override the base parameters of a queue, as defined in the associated SAP egress QoS policy.
SEQUENCE OF SapEgrQosQueueInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.20
sapEgrQosQueueInfoEntryOverride values for the specified SAP egress QoS queue. These values override the corresponding ones specified in the associated SAP egress QoS policy.
SapEgrQosQueueInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.20.1
sapEgrQosQIdThe value of sapEgrQosQId indicates the ID of the queue whose parameters are to be overridden.
TEgressQueueId (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.20.1.1
sapEgrQosQRowStatusThe value of sapEgrQosQRowStatus controls the creation and deletion of rows in this table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.20.1.2
sapEgrQosQLastMgmtChangeThe value of sapEgrQosQLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.20.1.3
sapEgrQosQOverrideFlagsThe value of sapEgrQosQOverrideFlags specifies the set of attributes whose values have been overridden via management on this queue. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's ingress QoS policy.rw
TQosQueueAttribute (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.20.1.4
sapEgrQosQCBSThe value of sapEgrQosQCBS specifies the amount of reserved buffer space (in kilo bytes) for this queue.rw
TBurstSize UNITS "kilo bytes"
.1.3.6.1.4.1.6527.3.1.2.4.3.20.1.5
sapEgrQosQMBSThe value of sapEgrQosQMBS specifies the maximum amount of buffer space (in kilo bytes) allowed for this queue.rw
TBurstSize UNITS "kilo bytes"
.1.3.6.1.4.1.6527.3.1.2.4.3.20.1.6
sapEgrQosQHiPrioOnlyThe value of sapEgrQosQHiPrioOnly specifies the percentage of buffer space for this queue, used exclusively by high priority packets.rw
TBurstPercentOrDefault UNITS "percent"
.1.3.6.1.4.1.6527.3.1.2.4.3.20.1.7
sapEgrQosQCIRAdaptationThe value of sapEgrQosQCIRAdaptation specifies the criteria to use to compute the operational CIR value for this queue, while maintaining a minimum offset.rw
TAdaptationRule (ALCATEL-IND1-TIMETRA-QOS-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.20.1.8
sapEgrQosQPIRAdaptationThe value of sapEgrQosQPIRAdaptation specifies the criteria to use to compute the operational PIR value for this queue, while maintaining a minimum offset.rw
TAdaptationRule (ALCATEL-IND1-TIMETRA-QOS-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.20.1.9
sapEgrQosQAdminPIRThe value of sapEgrQosQAdminPIR specifies the desired PIR value for this queue.rw
TPIRRate UNITS "kilo bits per second"
.1.3.6.1.4.1.6527.3.1.2.4.3.20.1.10
sapEgrQosQAdminCIRThe value of sapEgrQosQAdminCIR specifies the desired CIR value for this queue.rw
TCIRRate UNITS "kilo bits per second"
.1.3.6.1.4.1.6527.3.1.2.4.3.20.1.11
sapEgrQosQAvgOverheadThe value of sapEgrQosQAvgOverhead specifies the encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa.rw
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.20.1.12
sapIngQosSchedInfoTableThis table is used to override the base parameters of a virtual scheduler, as defined in the associated SAP ingress scheduler policy.
SEQUENCE OF SapIngQosSchedInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.21
sapIngQosSchedInfoEntryOverride values for the specified SAP ingress virtual scheduler. These values override the corresponding ones specified in the associated SAP ingress scheduler policy.
SapIngQosSchedInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.21.1
sapIngQosSNameThe value of sapIngQosSName indicates the name of the virtual scheduler whose parameters are to be overridden.
TNamedItem (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.21.1.1
sapIngQosSRowStatusThe value of sapIngQosSRowStatus controls the creation and deletion of rows in this table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.21.1.2
sapIngQosSLastMgmtChangeThe value of sapIngQosSLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.21.1.3
sapIngQosSOverrideFlagsThe value of sapIngQosSOverrideFlags specifies the set of attributes whose values have been overridden via management on this virtual scheduler. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's ingress scheduler policy.rw
TVirtSchedAttribute (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.21.1.4
sapIngQosSPIRThe value of sapIngQosSPIR specifies the desired PIR value for this virtual scheduler.rw
TPIRRate UNITS "kilo bits per second"
.1.3.6.1.4.1.6527.3.1.2.4.3.21.1.5
sapIngQosSCIRThe value of sapIngQosSCIR specifies the desired CIR value for this virtual scheduler.rw
TCIRRate UNITS "kilo bits per second"
.1.3.6.1.4.1.6527.3.1.2.4.3.21.1.6
sapIngQosSSummedCIRThe value of sapIngQosSSummedCIR specifies if the CIR should be used as the summed CIR values of the children schedulers or queues. If set to 'true', the applicable scheduler CIR (sapIngQosSCIR) loses its meaning.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.21.1.7
sapEgrQosSchedInfoTableThis table is used to override the base parameters of a virtual scheduler, as defined in the associated SAP egress scheduler policy.
SEQUENCE OF SapEgrQosSchedInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.22
sapEgrQosSchedInfoEntryOverride values for the specified SAP egress virtual scheduler. These values override the corresponding ones specified in the associated SAP egress scheduler policy.
SapEgrQosSchedInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.22.1
sapEgrQosSNameThe value of sapEgrQosSName indicates the name of the virtual scheduler whose parameters are to be overridden.
TNamedItem (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.22.1.1
sapEgrQosSRowStatusThe value of sapEgrQosSRowStatus controls the creation and deletion of rows in this table.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.22.1.2
sapEgrQosSLastMgmtChangeThe value of sapEgrQosSLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.22.1.3
sapEgrQosSOverrideFlagsThe value of sapEgrQosSOverrideFlags specifies the set of attributes whose values have been overridden via management on this virtual scheduler. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's egress scheduler policy.rw
TVirtSchedAttribute (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.22.1.4
sapEgrQosSPIRThe value of sapEgrQosSPIR specifies the desired PIR value for this virtual scheduler.rw
TPIRRate UNITS "kilo bits per second"
.1.3.6.1.4.1.6527.3.1.2.4.3.22.1.5
sapEgrQosSCIRThe value of sapEgrQosSCIR specifies the desired CIR value for this virtual scheduler.rw
TCIRRate UNITS "kilo bits per second"
.1.3.6.1.4.1.6527.3.1.2.4.3.22.1.6
sapEgrQosSSummedCIRThe value of sapEgrQosSSummedCIR specifies if the CIR should be used as the summed CIR values of the children schedulers or queues. If set to 'true', the applicable scheduler CIR (sapEgrQosSCIR) loses its meaning.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.22.1.7
sapSubMgmtInfoTableA table that contains SAP subscriber management information.
SEQUENCE OF SapSubMgmtInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.23
sapSubMgmtInfoEntrySubscriber management specific information about a SAP.
SapSubMgmtInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.23.1
sapSubMgmtAdminStatusThe value of sapSubMgmtAdminStatus specifies whether enhanced subscriber management is enabled on this SAP.rw
TmnxEnabledDisabled (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.23.1.1
sapSubMgmtDefSubProfileThe value of sapSubMgmtDefSubProfile specifies the default subscriber profile applicable on this SAP. The corresponding profile is defined in TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable. A value of 'default' is not allowed for this object.rw
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.23.1.2
sapSubMgmtDefSlaProfileThe value of sapSubMgmtDefSlaProfile specifies the default SLA profile applicable on this SAP. The corresponding profile is defined in TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfileTable.rw
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.23.1.3
sapSubMgmtSubIdentPolicyThe value of sapSubMgmtSubIdentPolicy specifies the subscriber identification policy applicable on this SAP. The corresponding policy is defined in TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubIdentPolicyTable.rw
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.23.1.4
sapSubMgmtSubscriberLimitThe value of sapSubMgmtSubscriberLimit specifies the maximum number of subscribers allowed for this SAP. If the value is 0, there is no limit. Only if the value is 1, the 'single-sub-parameters' defined with objects sapSubMgmtProfiledTrafficOnly, sapSubMgmtNonSubTrafficSubProf and sapSubMgmtNonSubTrafficSlaProf are meaningful.rw
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.23.1.5
sapSubMgmtProfiledTrafficOnlyThe value of sapSubMgmtProfiledTrafficOnly specifies whether only profiled traffic is applicable for this SAP. If set to 'true', all SAP queues will be deleted. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.23.1.6
sapSubMgmtNonSubTrafficSubIdentThe value of sapSubMgmtNonSubTrafficSubIdent specifies the subscriber identification applicable on this SAP for all non-subscriber traffic. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1.rw
DisplayString
.1.3.6.1.4.1.6527.3.1.2.4.3.23.1.7
sapSubMgmtNonSubTrafficSubProfThe value of sapSubMgmtNonSubTrafficSubProf specifies the subscriber profile applicable on this SAP for all non-subscriber traffic. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1.rw
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.23.1.8
sapSubMgmtNonSubTrafficSlaProfThe value of sapSubMgmtNonSubTrafficSlaProf specifies the SLA profile applicable on this SAP for all non-subscriber traffic. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1.rw
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.23.1.9
sapSubMgmtMacDaHashingThe value of sapSubMgmtMacDaHashing specifies whether subscriber traffic egressing a LAG SAP has its egress LAG link selected by a function of the MAC destination address instead of subscriber id. The value of this object is only meaningful if sapSubMgmtAdminStatus is set to 'enabled' and can only be configured for TLS services.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.23.1.10
sapSubMgmtDefSubIdentThe value of sapSubMgmtDefSubIdent specifies what is used as the default subscriber identification applicable on this SAP. This value is used in case no other source (like Radius) provides a subscriber identification string. If the value of this objects is set to 'useSapId', the SAP-id is used as the default subscriber identification string. In this case, sapSubMgmtDefSubIdentString must contain the empty string. If the value of this object is set to 'useString', the value of sapSubMgmtDefSubIdentString is used as the default subscriber identification string. In this case, an empty sapSubMgmtDefSubIdentString means that there is no default subscriber identification configured.rw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.23.1.11
sapSubMgmtDefSubIdentStringThe value of sapSubMgmtDefSubIdentString specifies the default subscriber identification string applicable on this SAP.rw
DisplayString
.1.3.6.1.4.1.6527.3.1.2.4.3.23.1.12
sapSubMgmtDefAppProfileThe value of sapSubMgmtDefAppProfile specifies the default application profile applicable on this SAP. The corresponding profile is defined in TIMETRA-BSX-MIB::tmnxBsxAppProfTable.rw
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.23.1.13
sapSubMgmtNonSubTrafficAppProfThe value of sapSubMgmtNonSubTrafficAppProf specifies the application profile applicable on this SAP for all non-subscriber traffic. The value of this object is only meaningful if sapSubMgmtSubscriberLimit is set to 1.rw
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.23.1.14
sapTlsMstiTableThis table contains Multiple Spanning Tree Instance information for the SAP. Each management VPLS running MSTP can have upto 15 MSTI. An entry in this table is automatically created when a tlsMstiEntry is created.
SEQUENCE OF SapTlsMstiEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.24
sapTlsMstiEntryInformation about a specific MSTI for a SAP.
SapTlsMstiEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.24.1
sapTlsMstiPriorityThe value of the object sapTlsMstiPriority specifies the value of the port priority field which is contained in the most significant 4 bits of the 16-bit Port ID associated with this SAP and MSTI. As only the most significant 4 bits of the value are used, the actual value of this object is limited to multiples of 16: e.g. the agent rounds down the value to one of: 0, 16, 32, .. , 224, 240.rw
Integer32
.1.3.6.1.4.1.6527.3.1.2.4.3.24.1.1
sapTlsMstiPathCostThe value of the object sapTlsMstiPathCost specifies the contribution of this port to the MSTI path cost of paths towards the spanning tree regional root which include this port.rw
INTEGER
.1.3.6.1.4.1.6527.3.1.2.4.3.24.1.2
sapTlsMstiLastMgmtChangeThe value of the object sapTlsMstiLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this SAP MSTI information.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.24.1.3
sapTlsMstiPortRolesapTlsMstiPortRole indicates the current role of the sap in the MSTI as defined by the Spanning Tree Protocol.ro
StpPortRole (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.24.1.4
sapTlsMstiPortStateThe value of the object sapTlsMstiPortState indicates the port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the 'broken' state.ro
TStpPortState (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.24.1.5
sapTlsMstiDesignatedBridgeThe value of the object sapTlsMstiDesignatedBridge indicates the Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment for this MSTI.ro
BridgeId (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.24.1.6
sapTlsMstiDesignatedPortThe value of the object sapTlsMstiDesignatedPort indicates the Port Identifier of the port on the Designated Bridge for this port's segment for this MSTI.ro
Integer32
.1.3.6.1.4.1.6527.3.1.2.4.3.24.1.7
sapIpipeInfoTableA table that contains IPIPE specific SAP information.
SEQUENCE OF SapIpipeInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.25
sapIpipeInfoEntryIPIPE specific information about a SAP.
SapIpipeInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.25.1
sapIpipeCeInetAddressTypeThe value of the object sapIpipeCeInetAddressType specifies the addresstype of the local end host IP of an IPIPE.rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.25.1.1
sapIpipeCeInetAddressThe type of this address is determined by the value of the sapIpipeCeInetAddressType object. This object specifies the IPv4 address of the local end host of an IPIPE.rw
InetAddress
.1.3.6.1.4.1.6527.3.1.2.4.3.25.1.2
sapIpipeMacRefreshIntervalThe value of sapIpipeMacRefreshInterval specifies the interval between successive attempts to refresh the MAC address of the CE device associated with an Ethernet ipipe SAP. If no other event (such as reception of an ARP request from the CE) occurs that would refresh the MAC address before the end of the interval, an ARP request will be originated from the IPIPE SAP.rw
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.25.1.3
sapIpipeMacAddressThe value of the object sapIpipeMacAddress specifies the MAC address of an IPIPE Ethernet SAP.rw
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.25.1.4
sapIpipeArpedMacAddressThe value of the object sapIpipeArpedMacAddress indicates the MAC address of the local end host.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.25.1.5
sapIpipeArpedMacAddressTimeoutThe value of the object sapIpipeArpedMacAddressTimeout indicates the number of seconds to wait for the sapIpipeArpedMacAddress to be re-refreshed.ro
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.25.1.6
sapTodMonitorTableThis table contains information on configurable objects on SAP level, that can be modified by a scheduled policy.
SEQUENCE OF SapTodMonitorEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.26
sapTodMonitorEntryInformation about ToD policy modifiable config data for a SAP.
SapTodMonitorEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1
sapCurrentIngressIpFilterIdThe value of the object sapCurrentIngressIpFilterId indicates the index in the tIPFilterTable corresponding to the ingress filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapIngressIpFilterId in case it is overruled by a ToD Suite policy.ro
TFilterID (ALCATEL-IND1-TIMETRA-FILTER-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.1
sapCurrentIngressIpv6FilterIdThe value of the object sapCurrentIngressIpv6FilterId indicates the index in the tIPv6FilterTable corresponding to the ingress Ipv6 filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapIngressIpv6FilterId in case it is overruled by a ToD Suite policy.ro
TFilterID (ALCATEL-IND1-TIMETRA-FILTER-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.2
sapCurrentIngressMacFilterIdThe value of the object sapCurrentIngressMacFilterId indicates the index in the tMacFilterTable corresponding to the ingress Mac filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapIngressMacFilterId in case it is overruled by a ToD Suite policy.ro
TFilterID (ALCATEL-IND1-TIMETRA-FILTER-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.3
sapCurrentIngressQosPolicyIdThe value of the object sapCurrentIngressQosPolicyId indicates the index in the tSapIngressTable corresponding to the ingress Qos Policy applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapIngressQosPolicyId in case it is overruled by a ToD Suite policy.ro
TSapIngressPolicyID (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.4
sapCurrentIngressQosSchedPlcyThe value of the object sapCurrentIngressQosSchedPlcy indicates the ingress QoS scheduler on this SAP, or zero if none is currently active. The active policy may deviate from sapIngressQosSchedulerPolicy in case it is overruled by a ToD Suite policy defined on this SAP, or on the multi-service this SAP belongs to.ro
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.5
sapCurrentEgressIpFilterIdThe value of the object sapCurrentEgressIpFilterId indicates the index in the tIPFilterTable corresponding to the Egress filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapEgressIpFilterId in case it is overruled by a ToD Suite policy.ro
TFilterID (ALCATEL-IND1-TIMETRA-FILTER-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.6
sapCurrentEgressIpv6FilterIdThe value of the object sapCurrentEgressIpv6FilterId indicates the index in the tIPv6FilterTable corresponding to the Egress Ipv6 filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapEgressIpv6FilterId in case it is overruled by a ToD Suite policy.ro
TFilterID (ALCATEL-IND1-TIMETRA-FILTER-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.7
sapCurrentEgressMacFilterIdThe value of the object sapCurrentEgressMacFilterId indicates the index in the tMacFilterTable corresponding to the Egress Mac filter applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapEgressMacFilterId in case it is overruled by a ToD Suite policy.ro
TFilterID (ALCATEL-IND1-TIMETRA-FILTER-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.8
sapCurrentEgressQosPolicyIdThe value of the object sapCurrentEgressQosPolicyId indicates the index in the tSapEgressTable corresponding to the Egress Qos Policy applied on this SAP, or zero if no filter is currently active. The active filter may deviate from sapEgressQosPolicyId in case it is overruled by a ToD Suite policy.ro
TSapEgressPolicyID (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.9
sapCurrentEgressQosSchedPlcyThe value of the object sapCurrentEgressQosSchedPlcy indicates the Egress QoS scheduler on this SAP, or zero if none is currently active. The active policy may deviate from sapEgressQosSchedulerPolicy in case it is overruled by a ToD Suite policy defined on this SAP, or on the multi-customer this SAP belongs to.ro
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.10
sapIntendedIngressIpFilterIdThe value of the object sapIntendedIngressIpFilterId indicates the index in the tIPFilterTable corresponding to the ingress IP filter that should be applied on this SAP. If it deviates from sapCurrentIngressIpFilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.ro
TFilterID (ALCATEL-IND1-TIMETRA-FILTER-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.11
sapIntendedIngressIpv6FilterIdThe value of the object sapIntendedIngressIpv6FilterId indicates the index in the tIPv6FilterTable corresponding to the ingress Ipv6 filter that should be applied on this SAP. If it deviates from sapCurrentIngressIpv6FilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.ro
TFilterID (ALCATEL-IND1-TIMETRA-FILTER-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.12
sapIntendedIngressMacFilterIdThe value of the object sapIntendedIngressMacFilterId indicates the index in the tMacFilterTable corresponding to the ingress Mac filter that should be applied on this SAP. If it deviates from sapCurrentIngressMacFilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.ro
TFilterID (ALCATEL-IND1-TIMETRA-FILTER-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.13
sapIntendedIngressQosPolicyIdThe value of the object sapIntendedIngressQosPolicyId indicates the index in the tSapIngressTable corresponding to the ingress Qos policy that should be applied on this SAP. If it deviates from sapCurrentIngressQosPolicyId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.ro
TSapIngressPolicyID (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.14
sapIntendedIngressQosSchedPlcyThe value of the object sapIntendedIngressQosSchedPlcy indicates the ingress QoS scheduler that should be applied on this SAP. If it deviates from sapCurrentIngressQosSchedPlcy, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.ro
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.15
sapIntendedEgressIpFilterIdThe value of the object sapIntendedEgressIpFilterId indicates the index in the tIPFilterTable corresponding to the Egress IP filter scheduler that should be applied on this SAP. If it deviates from sapCurrentEgressIpFilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.ro
TFilterID (ALCATEL-IND1-TIMETRA-FILTER-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.16
sapIntendedEgressIpv6FilterIdThe value of the object sapIntendedEgressIpv6FilterId indicates the index in the tIPv6FilterTable corresponding to the Egress IPv6 filter scheduler that should be applied on this SAP. If it deviates from sapCurrentEgressIpv6FilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.ro
TFilterID (ALCATEL-IND1-TIMETRA-FILTER-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.17
sapIntendedEgressMacFilterIdThe value of the object sapIntendedEgressMacFilterId indicates the index in the tMacFilterTable corresponding to the Egress mac filter scheduler that should be applied on this SAP. If it deviates from sapCurrentEgressMacFilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.ro
TFilterID (ALCATEL-IND1-TIMETRA-FILTER-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.18
sapIntendedEgressQosPolicyIdThe value of the object sapIntendedEgressQosPolicyId indicates the index in the tSapEgressTable corresponding to the Egress Qos Policy that should be applied on this SAP. If it deviates from sapCurrentEgressQosPolicyId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.ro
TSapEgressPolicyID (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.19
sapIntendedEgressQosSchedPlcyThe value of the object sapIntendedEgressQosSchedPlcy indicates the index in the tSapEgressTable corresponding to the Egress Qos Scheduler policy that should be applied on this SAP. If it deviates from sapCurrentEgressQosSchedPlcy, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.ro
ServObjName (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.26.1.20
sapIngrQosPlcyStatsTableA table that contains Ingress Qos policy related statistics for a SAP.
SEQUENCE OF SapIngrQosPlcyStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.27
sapIngrQosPlcyStatsEntryStatistics about a specific Ingress Qos Policy applied on a specific SAP.
SapIngrQosPlcyStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.27.1
sapIgQosPlcyIdThe value of the object sapIgQosPlcyId indicates the row index in the tSapIngressTable corresponding to this ingress QoS policy, or one if no policy is specified.
TSapIngressPolicyID (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.27.1.1
sapIgQosPlcyDroppedHiPrioPacketsThe value of the object sapIgQosPlcyDroppedHiPrioPackets indicates the number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.27.1.2
sapIgQosPlcyDroppedHiPrioOctetsThe value of the object sapIgQosPlcyDroppedHiPrioOctets indicates the number of high priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.27.1.3
sapIgQosPlcyDroppedLoPrioPacketsThe value of the object sapIgQosPlcyDroppedLoPrioPackets indicates the number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.27.1.4
sapIgQosPlcyDroppedLoPrioOctetsThe value of the object sapIgQosPlcyDroppedLoPrioOctets indicates the number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.27.1.5
sapIgQosPlcyForwardedInProfPacketsThe value of the object sapIgQosPlcyForwardedInProfPackets indicates the number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.27.1.6
sapIgQosPlcyForwardedInProfOctetsThe value of the object sapIgQosPlcyForwardedInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.27.1.7
sapIgQosPlcyForwardedOutProfPacketsThe value of the object sapIgQosPlcyForwardedOutProfPackets indicates the number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.27.1.8
sapIgQosPlcyForwardedOutProfOctetsThe value of the object sapIgQosPlcyForwardedOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.27.1.9
sapEgrQosPlcyStatsTableA table that contains Egress Qos policy related statistics for a SAP.
SEQUENCE OF SapEgrQosPlcyStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.28
sapEgrQosPlcyStatsEntryStatistics about a specific Egress Qos Policy applied on a specific SAP.
SapEgrQosPlcyStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.28.1
sapEgQosPlcyIdThe value of the object sapEgQosPlcyId indicates the row index in the tSapEgressTable corresponding to this egress QoS policy, or one if no policy is specified.
TSapEgressPolicyID (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.28.1.1
sapEgQosPlcyDroppedInProfPacketsThe value of the object sapEgQosPlcyDroppedInProfPackets indicates the number of in-profile packets, as determined by the SAP egress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.28.1.2
sapEgQosPlcyDroppedInProfOctetsThe value of the object sapEgQosPlcyDroppedInProfOctets indicates the number of in-profile octets, as determined by the SAP egress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.28.1.3
sapEgQosPlcyDroppedOutProfPacketsThe value of the object sapEgQosPlcyDroppedOutProfPackets indicates the number of out-profile packets, as determined by the SAP egress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.28.1.4
sapEgQosPlcyDroppedOutProfOctetsThe value of the object sapEgQosPlcyDroppedOutProfOctets indicates the number of out-profile octets, as determined by the SAP egress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.28.1.5
sapEgQosPlcyForwardedInProfPacketsThe value of the object sapEgQosPlcyForwardedInProfPackets indicates the number of in-profile packets (rate below CIR) forwarded by the egress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.28.1.6
sapEgQosPlcyForwardedInProfOctetsThe value of the object sapEgQosPlcyForwardedInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the egress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.28.1.7
sapEgQosPlcyForwardedOutProfPacketsThe value of the object sapEgQosPlcyForwardedOutProfPackets indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.28.1.8
sapEgQosPlcyForwardedOutProfOctetsThe value of the object sapEgQosPlcyForwardedOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.28.1.9
sapIngQosPlcyQueueStatsTableA table that contains ingress QoS queue SAP statistics, per Ingress QoS Policy the queue was used by.
SEQUENCE OF SapIngQosPlcyQueueStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.29
sapIngQosPlcyQueueStatsEntryIngress statistics about a specific SAP's QoS queue for a given Qos policy.
SapIngQosPlcyQueueStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.29.1
sapIgQosPlcyQueuePlcyIdThe value of the object sapIgQosPlcyQueuePlcyId indicates the row index in the tSapIngressTable corresponding to this ingress QoS policy.
TSapIngressPolicyID (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.29.1.1
sapIgQosPlcyQueueIdThe index of the ingress QoS queue of this SAP used by the policy indicated by sapIgQosPlcyQueuePlcyId.
TSapIngQueueId (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.29.1.2
sapIgQosPlcyQueueStatsOfferedHiPrioPacketsThe value of sapIgQosPlcyQueueStatsOfferedHiPrioPackets indicates the number of high priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.29.1.3
sapIgQosPlcyQueueStatsDroppedHiPrioPacketsThe value of sapIgQosPlcyQueueStatsDroppedHiPrioPackets indicates the number of high priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.29.1.4
sapIgQosPlcyQueueStatsOfferedLoPrioPacketsThe value of sapIgQosPlcyQueueStatsOfferedLoPrioPackets indicates the number of low priority packets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.29.1.5
sapIgQosPlcyQueueStatsDroppedLoPrioPacketsThe value of sapIgQosPlcyQueueStatsDroppedLoPrioPackets indicates the number of low priority packets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.29.1.6
sapIgQosPlcyQueueStatsOfferedHiPrioOctetsThe value of sapIgQosPlcyQueueStatsOfferedHiPrioOctets indicates the number of high priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.29.1.7
sapIgQosPlcyQueueStatsDroppedHiPrioOctetsThe value of sapIgQosPlcyQueueStatsDroppedHiPrioOctets indicates the number ofhigh priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.29.1.8
sapIgQosPlcyQueueStatsOfferedLoPrioOctetsThe value of sapIgQosPlcyQueueStatsOfferedLoPrioOctets indicates the number of low priority octets, as determined by the SAP ingress QoS policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.29.1.9
sapIgQosPlcyQueueStatsDroppedLoPrioOctetsThe value of sapIgQosPlcyQueueStatsDroppedLoPrioOctets indicates the number of low priority octets, as determined by the SAP ingress QoS policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.29.1.10
sapIgQosPlcyQueueStatsForwardedInProfPacketsThe value of sapIgQosPlcyQueueStatsForwardedInProfPackets indicates the number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.29.1.11
sapIgQosPlcyQueueStatsForwardedOutProfPacketsThe value of sapIgQosPlcyQueueStatsForwardedOutProfPackets indicates the number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.29.1.12
sapIgQosPlcyQueueStatsForwardedInProfOctetsThe value of sapIgQosPlcyQueueStatsForwardedInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.29.1.13
sapIgQosPlcyQueueStatsForwardedOutProfOctetsThe value of sapIgQosPlcyQueueStatsForwardedOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.29.1.14
sapIgQosPlcyQueueCustIdThe value of the object sapIgQosPlcyQueueCustId indicates the Customer ID for the associated service.ro
TmnxCustId (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.29.1.15
sapIgQosPlcyQueueStatsUncoloredPacketsOfferedThe value of sapIgQosPlcyQueueStatsUncoloredPacketsOffered indicates the number of uncolored packets offered to the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.29.1.16
sapIgQosPlcyQueueStatsUncoloredOctetsOfferedThe value of sapIgQosPlcyQueueStatsUncoloredOctetsOffered indicates the number of uncolored octets offered to the ingress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.29.1.17
sapEgrQosPlcyQueueStatsTableA table that contains egress QoS queue SAP statistics per Egress QoS Policy the queue was used by.
SEQUENCE OF SapEgrQosPlcyQueueStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.30
sapEgrQosPlcyQueueStatsEntryEgress statistics about a specific SAP's QoS queue for a given Qos policy.
SapEgrQosPlcyQueueStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.30.1
sapEgQosPlcyQueuePlcyIdThe row index in the tSapEgressTable corresponding to this egress QoS policy.
TSapEgressPolicyID (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.30.1.1
sapEgQosPlcyQueueIdThe value of sapEgQosPlcyQueueId indicates index of the egress QoS queue of this SAP.
TSapEgrQueueId (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.30.1.2
sapEgQosPlcyQueueStatsForwardedInProfPacketsThe value of sapEgQosPlcyQueueStatsForwardedInProfPackets indicates the number of in-profile packets (rate below CIR) forwarded by the egress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.30.1.3
sapEgQosPlcyQueueStatsDroppedInProfPacketsThe value of sapEgQosPlcyQueueStatsDroppedInProfPackets indicates the number of in-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.30.1.4
sapEgQosPlcyQueueStatsForwardedOutProfPacketsThe value of sapEgQosPlcyQueueStatsForwardedOutProfPackets indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.30.1.5
sapEgQosPlcyQueueStatsDroppedOutProfPacketsThe value of sapEgQosPlcyQueueStatsDroppedOutProfPackets indicates the number out-of-profile packets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.30.1.6
sapEgQosPlcyQueueStatsForwardedInProfOctetsThe value of sapEgQosPlcyQueueStatsForwardedInProfOctets indicates the number ofin-profile octets (rate below CIR) forwarded by the egress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.30.1.7
sapEgQosPlcyQueueStatsDroppedInProfOctetsThe value of sapEgQosPlcyQueueStatsDroppedInProfOctets indicates the number in-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.30.1.8
sapEgQosPlcyQueueStatsForwardedOutProfOctetsThe value of sapEgQosPlcyQueueStatsForwardedOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.30.1.9
sapEgQosPlcyQueueStatsDroppedOutProfOctetsThe value of sapEgQosPlcyQueueStatsDroppedOutProfOctets indicates the number out-of-profile octets discarded by the egress Qchip due to: MBS exceeded, buffer pool limit exceeded, etc.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.30.1.10
sapEgQosPlcyQueueCustIdThe value of the object sapEgQosPlcyQueueCustId indicates the Customer ID for the associated service.ro
TmnxCustId (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.30.1.11
sapDhcpInfoTablesapDhcpInfoTable contains DHCP information related to a routed CO subscriber SAP. This table complements sapBaseInfoTable, and contains an entry for each routed CO subscriber SAP. Rows in this table are created and deleted automatically by the system.
SEQUENCE OF SapDhcpInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.31
sapDhcpInfoEntryDHCP specific information for a routed CO subscriber SAP.
SapDhcpInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.31.1
sapDhcpOperLeasePopulateThe value of the object sapDhcpOperLeasePopulate indicates the number of DHCP lease states currently allocated on this SAP.ro
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.31.1.1
sapIngSchedPlcyStatsTableA table that contains ingress QoS queue statistics for the SAP's, organized by scheduler policy.
SEQUENCE OF SapIngSchedPlcyStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.32
sapIngSchedPlcyStatsEntryStatistics about a specific SAP's ingress Qos Scheduler. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies.
SapIngSchedPlcyStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.32.1
sapIngSchedPlcyStatsFwdPktThe number of forwarded packets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.32.1.1
sapIngSchedPlcyStatsFwdOctThe number of forwarded octets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.32.1.2
sapEgrSchedPlcyStatsTableA table that contains egress QoS scheduler statistics for the SAP's, organized by scheduler policy.
SEQUENCE OF SapEgrSchedPlcyStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.33
sapEgrSchedPlcyStatsEntryStatistics about a specific SAP's egress QoS scheduler. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies.
SapEgrSchedPlcyStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.33.1
sapEgrSchedPlcyStatsFwdPktThe number of packets forwarded by the egress Qchip, as determined by the SAP egress scheduler policy.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.33.1.1
sapEgrSchedPlcyStatsFwdOctThe number of octets forwarded by the egress Qchip, as determined by the SAP egress scheduler policy.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.33.1.2
sapIngSchedPlcyPortStatsTableThe sapIngSchedPlcyPortStatsTable contains ingress QoS scheduler statistics for the SAP's, organized per scheduler policy and per port. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies.
SEQUENCE OF SapIngSchedPlcyPortStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.34
sapIngSchedPlcyPortStatsEntryStatistics about a specific SAP's ingress Qos Scheduler. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies.
SapIngSchedPlcyPortStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.34.1
sapIngSchedPlcyPortStatsPortThe value of sapIngSchedPlcyPortStatsPort is used as an index of the ingress QoS scheduler of this SAP. When the SAP is an aps/ccag/lag in 'link' mode, this object is the TmnxPortID of the member-port on which the scheduler is applied.ro
TmnxPortID (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.34.1.1
sapIngSchedPlcyPortStatsFwdPktThe value of sapIngSchedPlcyPortStatsFwdPkt indicates the number of forwarded packets, as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.34.1.2
sapIngSchedPlcyPortStatsFwdOctThe value of sapIngSchedPlcyPortStatsFwdOct indicates the number of forwarded octets,as determined by the SAP ingress scheduler policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.34.1.3
sapEgrSchedPlcyPortStatsTableThe sapEgrSchedPlcyPortStatsTable contains egress QoS scheduler statistics for the SAP's, organized per scheduler policy and per port. This table is used when the SAP is a CCAG or LAG in 'link' mode, or an APS. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies.
SEQUENCE OF SapEgrSchedPlcyPortStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.35
sapEgrSchedPlcyPortStatsEntryStatistics about a specific SAP's egress Qos Scheduler. Entries are created when a scheduler policy of a SAP is replaced with another one due to Time-Of-Day policies.
SapEgrSchedPlcyPortStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.35.1
sapEgrSchedPlcyPortStatsPortThe value of sapEgrSchedPlcyPortStatsPort is used as an index of the egress QoS scheduler of this SAP. When the SAP is an aps/ccag/lag in 'link' mode, this object is the TmnxPortID of the member-port on which the scheduler is applied.ro
TmnxPortID (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.35.1.1
sapEgrSchedPlcyPortStatsFwdPktThe value of sapEgrSchedPlcyPortStatsFwdPkt indicates the number of forwarded packets, as determined by the SAP egress scheduler policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.35.1.2
sapEgrSchedPlcyPortStatsFwdOctThe value of sapEgrSchedPlcyPortStatsFwdOct indicates the number of forwarded octets,as determined by the SAP egress scheduler policy, offered by the Pchip to the Qchip.ro
Counter64
.1.3.6.1.4.1.6527.3.1.2.4.3.35.1.3
sapCemInfoTableA table that contains CEM SAP information.
SEQUENCE OF SapCemInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.40
sapCemInfoEntryInformation about a specific CEM SAP.
SapCemInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.40.1
sapCemLastMgmtChangeThe value of the object sapCemLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this CEM SAP information.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.40.1.1
sapCemEndpointTypeThis object indicates the CEM SAP endpoint type.ro
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.40.1.2
sapCemBitrateThis object indicates the bit-rate in multiples of 64 Kbit/s of the CEM SAP.ro
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.40.1.3
sapCemCasTrunkFramingThis object indicates the CAS trunk framing mode of the CEM SAP.ro
TdmOptionsCasTrunkFraming (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.40.1.4
sapCemPayloadSizeThis object specifies the payload size (in bytes) of packets transmitted to the Packet Service Network (PSN) by the CEM SAP. This determines the size of the data that will be transmitted over the service. As well, if the size of the data received is not consistent with the payload size then the packet is considered malformed. Default value depends on the CEM SAP endpoint type (sapCemEndpointType), and if applicable, the number of timeslots (sapCemBitrate): --------------------------------------------------------- | Endpoint Type | Timeslots | Default payload size | ---------------------+-----------+----------------------- | 'unstructuredE1' | n/a | 256 bytes | ---------------------+-----------+----------------------- | 'unstructuredT1' | n/a | 192 bytes | ---------------------+-----------+----------------------- | 'unstructuredE3' | n/a | 1024 bytes | ---------------------+-----------+----------------------- | 'unstructuredT3' | n/a | 1024 bytes | ---------------------+-----------+----------------------- | 'nxDS0' (E1/T1) | N = 1 | 64 bytes | | +-----------+----------------------- | | N = 2..4 | N x 32 bytes | | +-----------+----------------------- | | N = 5..15 | N x 16 bytes | | +-----------+----------------------- | | N >= 16 | N x 8 bytes | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (E1)| N | N x 16 bytes | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (T1)| N | N x 24 bytes | --------------------------------------------------------- For all endpoint types except for 'nxDS0WithCas', valid payload size range is from the default (in the table above) to 2048 bytes. For 'nxDS0WithCas', sapCemPayloadSize divide by the number of timeslots (sapCemBitrate) must be an integer factor of the number of frames per trunk multiframe (i.e. 16 for E1 trunk and 24 for T1 trunk). For '1xDS0', sapCemPayloadSize must be a multiple of 2. For 'NxDS0', where N > 1, sapCemPayloadSize must be a multiple of the number of timeslots (sapCemBitrate). For 'unstructuredE1', 'unstructuredT1', 'unstructuredE3' and 'unstructuredT3', sapCemPayloadSize must be a multiple of 32 bytes. Configuring sapCemPayloadSize and sapCemJitterBuffer to values that result in less than 2 packet buffers or greater than 32 packet buffer is not allowed. Setting this object to 0 sets it back to the default value.rw
Unsigned32 (0|16..2048) UNITS "bytes"
.1.3.6.1.4.1.6527.3.1.2.4.3.40.1.5
sapCemJitterBufferThis object specifies the jitter buffer size in milliseconds (ms). Default value depends on the CEM SAP endpoint type (sapCemEndpointType), and if applicable, the number of timeslots (sapCemBitrate): --------------------------------------------------------- | Endpoint Type | Timeslots | Default jitter buf. | ---------------------+-----------+----------------------- | 'unstructuredE1' | n/a | 5 ms | ---------------------+-----------+----------------------- | 'unstructuredT1' | n/a | 5 ms | ---------------------+-----------+----------------------- | 'unstructuredE3' | n/a | 5 ms | ---------------------+-----------+----------------------- | 'unstructuredT3' | n/a | 5 ms | ---------------------+-----------+----------------------- | 'nxDS0' (E1/T1) | N = 1 | 32 ms | | +-----------+----------------------- | | N = 2..4 | 16 ms | | +-----------+----------------------- | | N = 5..15 | 8 ms | | +-----------+----------------------- | | N >= 16 | 5 ms | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (E1)| N | 8 ms | ---------------------+-----------+----------------------- | 'nxDS0WithCas' (T1)| N | 12 ms | --------------------------------------------------------- Configuring sapCemPayloadSize and sapCemJitterBuffer to values that result in less than 2 packet buffers or greater than 32 packet buffers is not allowed. The valid range is 1 to 250 ms. Setting this object to 0 sets it back to the default value.rw
Unsigned32 (0|1..250) UNITS "milliseconds"
.1.3.6.1.4.1.6527.3.1.2.4.3.40.1.6
sapCemUseRtpHeaderThis object specifies whether a RTP header is used when packets are transmitted to the Packet Service Network (PSN) by the CEM SAP.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.40.1.7
sapCemDifferentialThis object specifies whether this CEM SAP is in differential mode.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.40.1.8
sapCemTimestampFreqThis object specifies whether the value of the timestamp frequency in multiples of 8 KHz for this CEM SAP.ro
Unsigned32 UNITS "8 KHz"
.1.3.6.1.4.1.6527.3.1.2.4.3.40.1.9
sapCemReportAlarmThe value of sapCemReportAlarm determines when and if to generate notifications for the CEM SAP.rw
CemSapReportAlarm (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.40.1.10
sapCemReportAlarmStatusThe value of sapCemReportAlarmStatus indicates the current alarms on this CEM SAP.ro
CemSapReportAlarm (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.40.1.11
sapCemLocalEcidThe value of the object sapCemLocalEcid specifies the local ECID. Only valid if CEM SAP belongs to an EPIPE service.rw
CemSapEcid (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.40.1.12
sapCemRemoteMacAddrThe value of the object sapCemRemoteMacAddr specifies the remote MAC address. Only valid if CEM SAP belongs to an EPIPE service.rw
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.40.1.13
sapCemRemoteEcidThe value of the object sapCemRemoteEcid specifies the remote ECID. Only valid if CEM SAP belongs to an EPIPE service.rw
CemSapEcid (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.40.1.14
sapCemStatsTableA table that contains CEM SAP statistics.
SEQUENCE OF SapCemStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.41
sapCemStatsEntryStatistics for a specific CEM SAP.
SapCemStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.41.1
sapCemStatsIngressForwardedPktsThe value of sapCemStatsIngressForwardedPkts indicates the number of packets that were successfully forwarded.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.41.1.1
sapCemStatsIngressDroppedPktsThe value of sapCemStatsIngressDroppedPkts indicates the total number of packets that were dropped due to errors.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.41.1.2
sapCemStatsEgressForwardedPktsThe value of sapCemStatsEgressForwardedPkts indicates the number of packets that were successfully forwarded.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.41.1.3
sapCemStatsEgressDroppedPktsThe value of sapCemStatsEgressDroppedPkts indicates the total number of packets that were dropped due to errors.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.41.1.4
sapCemStatsEgressMissingPktsThe value of sapCemStatsEgressMissingPkts indicates the number of missing packets (as detected via control word sequence number gaps).ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.41.1.5
sapCemStatsEgressPktsReOrderThe value of sapCemStatsEgressPktsReOrder indicates the number of packets detected out of sequence (via control word sequence number), but successfully re-ordered.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.41.1.6
sapCemStatsEgressJtrBfrUnderrunsThe value of sapCemStatsEgressJtrBfrUnderruns indicates the number of times a packet needed to be played out and the jitter buffer was empty.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.41.1.7
sapCemStatsEgressJtrBfrOverrunsThe value of sapCemStatsEgressJtrBfrOverruns indicates the number of times a packet was dropped because it could not fit in the jitter buffer.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.41.1.8
sapCemStatsEgressMisOrderDroppedThe value of sapCemStatsEgressMisOrderDropped indicates the number of packets detected out of order (via control word sequence numbers), and could not be re-ordered, or could not be placed in the jitter buffer because it was out of the current window.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.41.1.9
sapCemStatsEgressMalformedPktsThe value of sapCemStatsEgressMalformedPkts indicates the number of packets detected with unexpected size, or bad headers' stack.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.41.1.10
sapCemStatsEgressLBitDroppedThe value of sapCemStatsEgressLBitDropped indicates the number of packets dropped due to the L bit set by the far end.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.41.1.11
sapCemStatsEgressMultipleDroppedThe value of sapCemStatsEgressMultipleDropped indicates the number of packets dropped due to multiple sequence numbers.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.41.1.12
sapCemStatsEgressESsThe value of sapCemStatsEgressESs indicates the number of Error Seconds (ESs) encountered. Any malformed packet, seq. error, LOPS and similar are considered as error seconds.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.41.1.13
sapCemStatsEgressSESsThe value of sapCemStatsEgressSESs indicates the number of Severely Error Seconds (SESs) encountered. This is when more than 30 percent of the packets within a one second window are missing.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.41.1.14
sapCemStatsEgressUASsThe value of sapCemStatsEgressUASs indicates the number of Unavailable Seconds (UASs) encountered. Any consecutive ten seconds of SESs are counted as one UAS.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.41.1.15
sapCemStatsEgressFailureCountsThe value of sapCemStatsEgressFailureCounts indicates the number failure events. A failure event begins when the LOPS failure is declared, and ends when the failure is cleared.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.41.1.16
sapCemStatsEgressUnderrunCountsThe value of sapCemStatsEgressUnderrunCounts indicates the number of times the jitter buffer went into an underrun state.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.41.1.17
sapCemStatsEgressOverrunCountsThe value of sapCemStatsEgressOverrunCounts indicates the number of times the jitter buffer went into an overrun state.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.41.1.18
sapTlsL2ptStatsTableA table that contains SAP Layer 2 Protocol Tunneling Statistics. This table complements sapTlsInfoTable. Rows in this table are created and deleted automatically by the system.
SEQUENCE OF SapTlsL2ptStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.42
sapTlsL2ptStatsEntryLayer 2 Protocol Tunneling Statistics for a specific SAP. The statistics are provided for each combination of Destination Address and LLC SNAP type.
SapTlsL2ptStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1
sapTlsL2ptStatsLastClearedTimeThe value of sapTlsL2ptStatsLastClearedTime indicates the last time that these stats were cleared. The value zero indicates that they have not been cleared yet.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.1
sapTlsL2ptStatsL2ptEncapStpConfigBpdusRxThe value of sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx indicates the number of L2PT encapsulated STP config bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.2
sapTlsL2ptStatsL2ptEncapStpConfigBpdusTxThe value of sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx indicates the number of L2PT encapsulated STP config bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.3
sapTlsL2ptStatsL2ptEncapStpRstBpdusRxThe value of sapTlsL2ptStatsL2ptEncapStpRstBpdusRx indicates the number of L2PT encapsulated STP rst bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.4
sapTlsL2ptStatsL2ptEncapStpRstBpdusTxThe value of sapTlsL2ptStatsL2ptEncapStpRstBpdusTx indicates the number of L2PT encapsulated STP rst bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.5
sapTlsL2ptStatsL2ptEncapStpTcnBpdusRxThe value of sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx indicates the number of L2PT encapsulated STP tcn bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.6
sapTlsL2ptStatsL2ptEncapStpTcnBpdusTxThe value of sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx indicates the number of L2PT encapsulated STP tcn bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.7
sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRxThe value of sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx indicates the number of L2PT encapsulated PVST config bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.8
sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTxThe value of sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx indicates the number of L2PT encapsulated PVST config bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.9
sapTlsL2ptStatsL2ptEncapPvstRstBpdusRxThe value of sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx indicates the number of L2PT encapsulated PVST rst bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.10
sapTlsL2ptStatsL2ptEncapPvstRstBpdusTxThe value of sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx indicates the number of L2PT encapsulated PVST rst bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.11
sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRxThe value of sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx indicates the number of L2PT encapsulated PVST tcn bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.12
sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTxThe value of sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx indicates the number of L2PT encapsulated PVST tcn bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.13
sapTlsL2ptStatsStpConfigBpdusRxThe value of sapTlsL2ptStatsStpConfigBpdusRx indicates the number of STP config bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.14
sapTlsL2ptStatsStpConfigBpdusTxThe value of sapTlsL2ptStatsStpConfigBpdusTx indicates the number of STP config bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.15
sapTlsL2ptStatsStpRstBpdusRxThe value of sapTlsL2ptStatsStpRstBpdusRx indicates the number of STP rst bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.16
sapTlsL2ptStatsStpRstBpdusTxThe value of sapTlsL2ptStatsStpRstBpdusTx indicates the number of STP rst bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.17
sapTlsL2ptStatsStpTcnBpdusRxThe value of sapTlsL2ptStatsStpTcnBpdusRx indicates the number of STP tcn bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.18
sapTlsL2ptStatsStpTcnBpdusTxThe value of sapTlsL2ptStatsStpTcnBpdusTx indicates the number of STP tcn bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.19
sapTlsL2ptStatsPvstConfigBpdusRxThe value of sapTlsL2ptStatsPvstConfigBpdusRx indicates the number of PVST config bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.20
sapTlsL2ptStatsPvstConfigBpdusTxThe value of sapTlsL2ptStatsPvstConfigBpdusTx indicates the number of PVST config bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.21
sapTlsL2ptStatsPvstRstBpdusRxThe value of sapTlsL2ptStatsPvstRstBpdusRx indicates the number of PVST rst bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.22
sapTlsL2ptStatsPvstRstBpdusTxThe value of sapTlsL2ptStatsPvstRstBpdusTx indicates the number of PVST rst bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.23
sapTlsL2ptStatsPvstTcnBpdusRxThe value of sapTlsL2ptStatsPvstTcnBpdusRx indicates the number of PVST tcn bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.24
sapTlsL2ptStatsPvstTcnBpdusTxThe value of sapTlsL2ptStatsPvstTcnBpdusTx indicates the number of PVST tcn bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.25
sapTlsL2ptStatsOtherBpdusRxThe value of sapTlsL2ptStatsOtherBpdusRx indicates the number of other bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.26
sapTlsL2ptStatsOtherBpdusTxThe value of sapTlsL2ptStatsOtherBpdusTx indicates the number of other bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.27
sapTlsL2ptStatsOtherL2ptBpdusRxThe value of sapTlsL2ptStatsOtherL2ptBpdusRx indicates the number of other L2PT bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.28
sapTlsL2ptStatsOtherL2ptBpdusTxThe value of sapTlsL2ptStatsOtherL2ptBpdusTx indicates the number of other L2PT bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.29
sapTlsL2ptStatsOtherInvalidBpdusRxThe value of sapTlsL2ptStatsOtherInvalidBpdusRx indicates the number of other invalid bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.30
sapTlsL2ptStatsOtherInvalidBpdusTxThe value of sapTlsL2ptStatsOtherInvalidBpdusTx indicates the number of other invalid bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.31
sapTlsL2ptStatsL2ptEncapCdpBpdusRxThe value of sapTlsL2ptStatsL2ptEncapCdpBpdusRx indicates the number of L2PT encapsulated CDP bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.32
sapTlsL2ptStatsL2ptEncapCdpBpdusTxThe value of sapTlsL2ptStatsL2ptEncapCdpBpdusTx indicates the number of L2PT encapsulated CDP bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.33
sapTlsL2ptStatsL2ptEncapVtpBpdusRxThe value of sapTlsL2ptStatsL2ptEncapVtpBpdusRx indicates the number of L2PT encapsulated VTP bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.34
sapTlsL2ptStatsL2ptEncapVtpBpdusTxThe value of sapTlsL2ptStatsL2ptEncapVtpBpdusTx indicates the number of L2PT encapsulated VTP bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.35
sapTlsL2ptStatsL2ptEncapDtpBpdusRxThe value of sapTlsL2ptStatsL2ptEncapDtpBpdusRx indicates the number of L2PT encapsulated DTP bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.36
sapTlsL2ptStatsL2ptEncapDtpBpdusTxThe value of sapTlsL2ptStatsL2ptEncapDtpBpdusTx indicates the number of L2PT encapsulated DTP bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.37
sapTlsL2ptStatsL2ptEncapPagpBpdusRxThe value of sapTlsL2ptStatsL2ptEncapPagpBpdusRx indicates the number of L2PT encapsulated PAGP bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.38
sapTlsL2ptStatsL2ptEncapPagpBpdusTxThe value of sapTlsL2ptStatsL2ptEncapPagpBpdusTx indicates the number of L2PT encapsulated PAGP bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.39
sapTlsL2ptStatsL2ptEncapUdldBpdusRxThe value of sapTlsL2ptStatsL2ptEncapUdldBpdusRx indicates the number of L2PT encapsulated UDLD bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.40
sapTlsL2ptStatsL2ptEncapUdldBpdusTxThe value of sapTlsL2ptStatsL2ptEncapUdldBpdusTx indicates the number of L2PT encapsulated UDLD bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.41
sapTlsL2ptStatsCdpBpdusRxThe value of sapTlsL2ptStatsCdpBpdusRx indicates the number of CDP bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.42
sapTlsL2ptStatsCdpBpdusTxThe value of sapTlsL2ptStatsCdpBpdusTx indicates the number of CDP bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.43
sapTlsL2ptStatsVtpBpdusRxThe value of sapTlsL2ptStatsVtpBpdusRx indicates the number of VTP bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.44
sapTlsL2ptStatsVtpBpdusTxThe value of sapTlsL2ptStatsVtpBpdusTx indicates the number of VTP bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.45
sapTlsL2ptStatsDtpBpdusRxThe value of sapTlsL2ptStatsDtpBpdusRx indicates the number of DTP bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.46
sapTlsL2ptStatsDtpBpdusTxThe value of sapTlsL2ptStatsDtpBpdusTx indicates the number of DTP bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.47
sapTlsL2ptStatsPagpBpdusRxThe value of sapTlsL2ptStatsPagpBpdusRx indicates the number of PAGP bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.48
sapTlsL2ptStatsPagpBpdusTxThe value of sapTlsL2ptStatsPagpBpdusTx indicates the number of PAGP bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.49
sapTlsL2ptStatsUdldBpdusRxThe value of sapTlsL2ptStatsUdldBpdusRx indicates the number of UDLD bpdus received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.50
sapTlsL2ptStatsUdldBpdusTxThe value of sapTlsL2ptStatsUdldBpdusTx indicates the number of UDLD bpdus transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.42.1.51
sapEthernetInfoTableA table that contains Ethernet SAP information.
SEQUENCE OF SapEthernetInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.43
sapEthernetInfoEntryInformation about a specific Ethernet SAP.
SapEthernetInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.43.1
sapEthernetLLFAdminStatussapEthernetLLFAdminStatus specifies whether or not Link- Loss Forwarding is enabled ('up'). When this object is set to 'up' the underlying port will be forced into the operationally 'down' state if the service is operationally 'down', or any of the 'sdpBindPwPeerStatusBits' are set, and will set the underlying port's tmnxPortEtherReasonDownFlags 'linklossFwd' bit. Setting this object to 'down' will clear the 'linklossFwd' reason. sapEthernetLLFAdminStatus can only be enabled on saps configured for an EPIPE service using an Ethernet port with the tmnxPortEncapType set to 'nullEncap.'rw
ServiceAdminStatus (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.43.1.1
sapEthernetLLFOperStatussapEthernetLLFOperStatus indicates whether or not the underlying port is forced operationally 'down' due to the service being operationally 'down' or an sdpBindPwPeerStatusBits bit is set. sapEthernetLLFOperStatus is set to 'fault' when the sapEthernetLLFAdminStatus is set to 'up,' and either a fault has occurred on the pseudo-wire, or the service is down, otherwise sapEthernetLLFOperStatus is set to 'clear.'ro
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.43.1.2
msapPlcyTableThe msapPlcyTable has an entry for each managed SAP(MSAP) policy configured in the system.
SEQUENCE OF MsapPlcyEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.44
msapPlcyEntryEach entry represents the configuration for a managed SAP(MSAP) policy. The values for each entry will be used to populate the following tables when the MSAP policy is applied to a MSAP: ALCATEL-IND1-TIMETRA-SAP-MIB::sapBaseInfoTable ALCATEL-IND1-TIMETRA-SAP-MIB::sapSubMgmtInfoTable
MsapPlcyEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1
msapPlcyNameThe value of msapPlcyName specifies the name of the MSAP policy.
TNamedItem (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1.1
msapPlcyRowStatusThe value of msapPlcyRowStatus is used for the creation and deletion of MSAP policies.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1.2
msapPlcyLastChangedThe value of msapPlcyLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1.3
msapPlcyDescriptionThe value of msapPlcyDescription specifies the description of the MSAP policy.rw
TItemDescription (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1.4
msapPlcyCpmProtPolicyIdThe value of msapPlcyCpmProtPolicyId specifies a CPM Protection policy for the MSAP policy. If a corresponding policy is not defined in TIMETRA-SECURITY-MIB::tmnxCpmProtPolTable, an 'inconsistentValue' error will be returned. A value of one specifies that the default CPM Protection policy is associated with the Managed SAP. This object is not supported on SR-1 and ESS-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'. An attempt to set msapPlcyCpmProtPolicyId to a non-zero value on one of these unsupported chassis types will return an 'inconsistentValue' error.rw
TCpmProtPolicyID (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1.5
msapPlcyCpmProtMonitorMacThe value of msapPlcyCpmProtMonitorMac specifies whether the tmnxCpmProtPolPerSrcRateLimit of the CPM Protection policy, as specified by msapPlcyCpmProtPolicyId, must be applied. If the value of msapPlcyCpmProtMonitorMac is 'true', the per-source rate limit must be applied. If the value of msapPlcyCpmProtPolicyId is equal to zero, the value of msapPlcyCpmProtMonitorMac is irrelevant and will be ignored. This object is not supported on SR-1 and ESS-1, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of ALCATEL-IND1-TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'. An attempt to set msapPlcyCpmProtMonitorMac to 'true' on one of these unsupported chassis types will return an 'inconsistentValue' error.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1.6
msapPlcySubMgmtDefSubIdThe value of msapPlcySubMgmtDefSubId specifies what will be used as the default subscriber identification applicable on the MSAP. This value is used in case no other source (like Radius) provides a subscriber identification string. If the value of this object is set to 'useSapId', the SAP-id will be used as the default subscriber identification string. In this case, msapPlcySubMgmtDefSubIdStr must contain the empty string, so any non-empty string in msapPlcySubMgmtDefSubIdStr will be set to an empty string. If the value of this object is set to 'useString', the value of msapPlcySubMgmtDefSubIdStr will be used as the default subscriber identification string. In this case, an empty msapPlcySubMgmtDefSubIdStr means that there is no default subscriber identification configured.rw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1.7
msapPlcySubMgmtDefSubIdStrThe value of msapPlcySubMgmtDefSubIdStr specifies the default subscriber identification string applicable on this MSAP.rw
TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1.8
msapPlcySubMgmtDefSubProfileThe value of msapPlcySubMgmtDefSubProfile specifies the default subscriber profile applicable on the MSAP. If a corresponding profile is not defined in tmnxSubProfileTable, an 'inconsistentValue' error will be returned. A value of 'default' is not allowed for this object.rw
TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1.9
msapPlcySubMgmtDefSlaProfileThe value of msapPlcySubMgmtDefSlaProfile specifies the default SLA profile applicable on the MSAP. If a corresponding profile is not defined in tmnxSLAProfileTable, an 'inconsistentValue' error will be returned.rw
TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1.10
msapPlcySubMgmtDefAppProfileThe value of msapPlcySubMgmtDefAppProfile specifies the default application profile applicable on the MSAP. If a corresponding profile is not defined in TIMETRA-BSX-MIB::tmnxBsxAppProfTable, an 'inconsistentValue' error will be returned.rw
TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1.11
msapPlcySubMgmtSubIdPlcyThe value of msapPlcySubMgmtSubIdPlcy specifies the subscriber identification policy applicable on the MSAP. If a corresponding profile is not defined in tmnxSubIdentPolicyTable, an 'inconsistentValue' error will be returned.rw
TPolicyStatementNameOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1.12
msapPlcySubMgmtSubscriberLimitThe value of msapPlcySubMgmtSubscriberLimit specifies the maximum number of subscribers allowed for the MSAP. A value is 0 means there is no limit. The values for the objects msapPlcySubMgmtProfiledTrafOnly, msapPlcySubMgmtNonSubTrafSubProf, and msapPlcySubMgmtNonSubTrafSlaProf are only meaningful when the value of msapPlcySubMgmtSubscriberLimit is 1 and will not be used when the value of msapPlcySubMgmtSubscriberLimit is not 1.rw
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1.13
msapPlcySubMgmtProfiledTrafOnlyThe value of msapPlcySubMgmtProfiledTrafOnly specifies whether only profiled traffic is applicable for the MSAP. If set to 'true', the MSAP queues will be deleted. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1.14
msapPlcySubMgmtNonSubTrafSubIdThe value of msapPlcySubMgmtNonSubTrafSubId specifies the subscriber identification applicable on the MSAP for all non-subscriber traffic. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1.rw
TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1.15
msapPlcySubMgmtNonSubTrafSubProfThe value of msapPlcySubMgmtNonSubTrafSubProf specifies the subscriber profile applicable on the MSAP for all non-subscriber traffic. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1.rw
TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1.16
msapPlcySubMgmtNonSubTrafSlaProfThe value of msapPlcySubMgmtNonSubTrafSlaProf specifies the SLA profile applicable on the MSAP for all non-subscriber traffic. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1.rw
TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1.17
msapPlcySubMgmtNonSubTrafAppProfThe value of msapPlcySubMgmtNonSubTrafAppProf specifies the Application profile applicable on the MSAP for all non-subscriber traffic. The value of this object is only meaningful if msapPlcySubMgmtSubscriberLimit is set to 1.rw
TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1.18
msapPlcyAssociatedMsapsThe value of msapPlcyAssociatedMsaps indicates the number of MSAPs associated with this MSAP policy.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.44.1.19
msapTlsPlcyTableThe msapTlsPlcyTable has an entry for each managed SAP (MSAP) policy configured in the system.
SEQUENCE OF MsapTlsPlcyEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.45
msapTlsPlcyEntryEach entry represents the VPLS-related configuration for a managed SAP (MSAP) policy. The values for each entry will be used to populate the following VPLS-related tables when the MSAP policy is applied to a MSAP: TIMETRA-SAP-MIB::sapTlsInfoTable TIMETRA-SAP-MIB::sapTlsDhcpInfoTable ALCATEL-IGMP-SNOOPING-MIB::tlsIgmpSnpgConfigTable
MsapTlsPlcyEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1
msapTlsPlcyLastChangedThe value of msapTlsPlcyLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.1
msapTlsPlcySplitHorizonGrpThe value of msapTlsPlcySplitHorizonGrp specifies the name of the split-horizon group for the MSAP. If the name specified does not correspond to a tlsShgInfoEntry for the VPLS service, the creation of the MSAP will fail. Additionally, if msapTlsPlcySplitHorizonGrp is set to a new value, the sapSplitHorizonGrp object for any existing MSAPs created by this policy will not be updated.rw
TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.2
msapTlsPlcyArpReplyAgentThe value of msapTlsPlcyArpReplyAgent specifies the status of the special ARP response mechanism in the system for ARP requests destined to static or dynamic hosts associated with the MSAP. 'disabled' - the ARP reply function is not operational 'enabled' - the ARP reply function is enabled without subscriber identification. 'enabledWithSubscrIdent' - the ARP reply function is enabled with subscriber identification.rw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.3
msapTlsPlcySubMgmtMacDaHashingThe value of msapTlsPlcySubMgmtMacDaHashing specifies whether subscriber traffic egressing a LAG MSAP has its egress LAG link selected by a function of the MAC destination address instead of subscriber id.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.4
msapTlsPlcyDhcpLeasePopulateThe value of msapTlsPlcyDhcpLeasePopulate specifies the maximum number of DHCP lease states allowed on the MSAP.rw
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.5
msapTlsPlcyDhcpPrxyAdminStateThe value of msapTlsPlcyDhcpPrxyAdminState specifies the desired administrative state of the proxy server on the interface.rw
TmnxEnabledDisabled (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.6
msapTlsPlcyDhcpPrxyServAddrTypeThe value of msapTlsPlcyDhcpPrxyServAddrType specifies the address type of msapTlsPlcyDhcpPrxyServAddr.rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.7
msapTlsPlcyDhcpPrxyServAddrThe value of msapTlsPlcyDhcpPrxyServAddr specifies the IP address of the which will be used as the source address of the emulated DHCP server in the context of the VPLS MSAP. This address is mandatory for the proxy server capability and it should be in the context of the subnet represented by the VPLS.rw
InetAddress
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.8
msapTlsPlcyDhcpPrxyLeaseTimeThe value of msapTlsPlcyDhcpPrxyLeaseTime specifies, in seconds, how long a DHCP client is allowed to use the offered IP address. A value of 0 means the lease time provided by a RADIUS or an upstream DHCP server will not be overridden. A value of 7 days (315446399 seconds) is used when RADIUS does not provide a lease time.rw
Unsigned32 (0|300..315446399) UNITS "seconds"
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.9
msapTlsPlcyDhcpPrxyLTRadOverrideThe value of msapTlsPlcyDhcpPrxyLTRadOverride specifies whether or not the lease time provided by the RADIUS server is presented to the DHCP client. By default the proxy-server will always make use of msapTlsPlcyDhcpPrxyLeaseTime, regardless of what lease time information is provided from the RADIUS server. When msapTlsPlcyDhcpPrxyLTRadOverride is set to 'true', the proxy-server will use the lease time information provided by the RADIUS server, regardless of the configured lease time.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.10
msapTlsPlcyDhcpInfoActionThe value of msapTlsPlcyDhcpInfoAction specifies the DHCP option reforwarding policy: 'replace' - replace existing information with configured information 'drop' - discard messages with existing relay information if the option-82 information is also present 'keep' - retain the existing relay informationrw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.11
msapTlsPlcyDhcpCircuitIdThe value of msapTlsPlcyDhcpCircuitId specifies whether or not the circuit-id suboption is present, and if it is present what information goes in it: none - the circuit-id suboption will not be part of the information option (Option 82). asciiTuple - the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name is used. vlanAsciiTuple - the format will include VLAN-id and dot1p bits in addition to what is included in ascii-tuple already. The format is supported on dot1q and qinq encapsulated ports only. Thus, when the option 82 bits are stripped, dot1p bits will be copied to the Ethernet header of an outgoing packet.rw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.12
msapTlsPlcyDhcpRemoteIdThe value of msapTlsPlcyDhcpRemoteId specifies what information goes into the remote-id suboption in the DHCP Relay packet. If the value of this object is set to 'none', the remote-id suboption will not be part of the information option (Option 82). If the value of this object is set to 'mac', the MAC address of the remote end is encoded in the suboption. If the value of this object is set to 'remote-id', msapTlsPlcyDhcpRemoteIdString will represent the remote-id. By default, the remote-id value is none.rw
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.13
msapTlsPlcyDhcpRemoteIdStringThe value of msapTlsPlcyDhcpRemoteIdString specifies the remote-id. The value of this object is ignored if msapTlsPlcyDhcpRemoteId does not have the value of 'remote-id'.rw
TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.14
msapTlsPlcyDhcpVendorInclOptsThe value of msapTlsPlcyDhcpVendorInclOpts specifies what is encoded in the Alcatel-Lucent vendor specific sub-option of option 82. The value of this object is only used when msapTlsPlcyDhcpInfoAction is 'replace'.rw
Bits
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.15
msapTlsPlcyDhcpVendorOptStrThe value of msapTlsPlcyDhcpVendorOptStr specifies the string that goes into the Alcatel-Lucent vendor specific sub-option of option 82. This string is only used when msapTlsPlcyDhcpInfoAction is set to 'replace'.rw
TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.16
msapTlsPlcyEgressMcastGroupThe value of msapTlsPlcyEgressMcastGroup specifies the Egress Multicast Group for the MSAP.rw
TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.17
msapTlsPlcyIgmpSnpgImportPlcyThe value of msapTlsPlcyIgmpSnpgImportPlcy specifies the policy statement that is be applied to all incoming IGMP messages on the MSAP.rw
TPolicyStatementNameOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.18
msapTlsPlcyIgmpSnpgFastLeaveThe value of msapTlsPlcyIgmpSnpgFastLeave specifies whether fast leave is allowed on this MSAP. If set to 'enabled', the system prunes the port on which an IGMP 'leave' message has been received without waiting for the Group Specific Query to timeout.rw
TmnxEnabledDisabled (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.19
msapTlsPlcyIgmpSnpgSendQueriesThe value of msapTlsPlcyIgmpSnpgSendQueries specifies whether the system generates General Queries by itself on the MSAP.rw
TmnxEnabledDisabled (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.20
msapTlsPlcyIgmpSnpgGenQueryIntvThe value of msapTlsPlcyIgmpSnpgGenQueryIntv specifies the interval (in seconds) between two consecutive general queries sent by the system on the MSAP. The value of this object is only meaningful when the value of msapTlsPlcyIgmpSnpgSendQueries is 'enabled'.rw
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.21
msapTlsPlcyIgmpSnpgQueryRespIntvThe value of msapTlsPlcyIgmpSnpgQueryRespIntv specifies the maximum response time (in seconds) advertised in IGMPv2/v3 queries. The value of this object is only meaningful when the value of msapTlsPlcyIgmpSnpgSendQueries is 'enabled'.rw
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.22
msapTlsPlcyIgmpSnpgRobustCountThe value of msapTlsPlcyIgmpSnpgRobustCount specifies the robustness variable on the MSAP. This object allows tuning for the expected packet loss on the MSAP. If a MSAP is expected to be lossy, the Robustness Variable may be increased. IGMP snooping is robust to (Robustness Variable-1) packet losses. The value of this object is only meaningful when the value of msapTlsPlcyIgmpSnpgSendQueries is 'enabled'.rw
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.23
msapTlsPlcyIgmpSnpgLastMembIntvlThe value of msapTlsPlcyIgmpSnpgLastMembIntvl specifies the Max Response Time (in tenths of a second) used in Group-Specific and Group-Source-Specific Queries sent in response to 'leave' messages. This is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group.rw
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.24
msapTlsPlcyIgmpSnpgMaxNbrGrpsThe value of msapTlsPlcyIgmpSnpgMaxNbrGrps specifies how many group addresses are allowed for the MSAP. The value 0 means that no limit is imposed.rw
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.25
msapTlsPlcyIgmpSnpgMvrFromVplsIdThe value of msapTlsPlcyIgmpSnpgMvrFromVplsId specifies from which VPLS the multicast streams corresponding to the groups learned via the MSAP are copied. Groups which cannot be joined to the corresponding MVR VPLS (because MVR is not up or the configured MVR policy rejects the group) copy the multicast streams from the local VPLS if IGMP snooping is up (i.e. tlsIgmpSnpgCfgAdminState is 'enabled').rw
TmnxServId (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.26
msapTlsPlcyIgmpSnpgVersionThe value of msapTlsPlcyIgmpSnpgVersion specifies the version of IGMP running on the MSAP.rw
TmnxIgmpVersion (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.27
msapTlsPlcyIgmpSnpgMcacPlcyNameThe value of msapTlsPlcyIgmpSnpgMcacPlcyName specifies the name of the multicast CAC (Connection Admission Control) policy.rw
TPolicyStatementNameOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.28
msapTlsPlcyIgmpSnpgMcacUncnstBWThe value of msapTlsPlcyIgmpSnpgMcacUncnstBW specifies the bandwidth assigned for interface's multicast CAC policy traffic in kilo-bits per second(kbps). If the default value of '-1' is set, there is no constraint on bandwidth allocated at the interface. If the value of msapTlsPlcyIgmpSnpgMcacUncnstBW is set to '0' and if a multicast CAC policy is assigned on the interface, then no group (channel) from that policy is allowed on that interface.rw
Integer32 (-1|0..2147483647) UNITS "kbps"
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.29
msapTlsPlcyIgmpSnpgMcacPrRsvMnBWThe value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW specifies the bandwidth pre-reserved for all the mandatory channels on a given interface in kilo-bits per second(kbps). If the value of msapTlsPlcyIgmpSnpgMcacUncnstBW is '0', no mandatory channels are allowed. If the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW is '-1', then all mandatory and optional channels are allowed. If the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW is equal to the value of msapTlsPlcyIgmpSnpgMcacUncnstBW, then all the unconstrained bandwidth on a given interface is allocated to mandatory channels configured through multicast CAC policy on that interface and no optional groups (channels) are allowed. The value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW should always be less than or equal to that of msapTlsPlcyIgmpSnpgMcacUncnstBW. An attempt to set the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW greater than that of msapTlsPlcyIgmpSnpgMcacUncnstBW will result in 'inconsistentValue' error.rw
Integer32 (-1|0..2147483647) UNITS "kbps"
.1.3.6.1.4.1.6527.3.1.2.4.3.45.1.30
msapIgmpSnpgMcacLevelTableThe msapIgmpSnpgMcacLevelTable has an entry for each multicast CAC policy constraint level configured for a Managed SAP policy.
SEQUENCE OF MSapIgmpSnpgMcacLevelEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.46
msapIgmpSnpgMcacLevelEntryEach row entry represents a multicast CAC policy bundle level constraints for a particular Managed SAP policy. Entries are created and deleted by the user.
MSapIgmpSnpgMcacLevelEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.46.1
msapIgmpSnpgMcacLevelIdThe value of msapIgmpSnpgMcacLevelId indicates the level id of the multicast CAC policy bundle constraint. The value of level 1 has the highest priority and level 8 the lowest.
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.46.1.1
msapIgmpSnpgMcacLevelRowStatusThe value of msapIgmpSnpgMcacLevelRowStatus is used for creation and deletion of level constraint in a CAC for a Managed SAP policy.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.46.1.2
msapIgmpSnpgMcacLevelLastChangedThe value of msapIgmpSnpgMcacLevelLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.46.1.3
msapIgmpSnpgMcacLevelBWThe value of msapIgmpSnpgMcacLevelBW specifies the bandwidth in kilo-bits per second (kbps) for the level.rw
Unsigned32 UNITS "kbps"
.1.3.6.1.4.1.6527.3.1.2.4.3.46.1.4
msapIgmpSnpgMcacLagTableThe msapIgmpSnpgMcacLagTable has an entry for each lag port configured for a multicast CAC policy bundle configured for a Managed SAP policy.
SEQUENCE OF MSapIgmpSnpgMcacLagEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.47
msapIgmpSnpgMcacLagEntryEach row entry represents a particular multicast CAC lag port constraints for a Managed SAP policy.. Entries are created and deleted by the user.
MSapIgmpSnpgMcacLagEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.47.1
msapIgmpSnpgMcacLagPortsDownThe value of msapIgmpSnpgMcacLagPortsDown indicates the configured number of ports in a lag group that are down. If the number of ports available in the lag is reduced by the number of ports configured for msapIgmpSnpgMcacLagPortsDown object then bandwidth allowed for bundle will be updated to the value of msapIgmpSnpgMcacLevelBW indexed by msapIgmpSnpgMcacLagLevel value.
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.47.1.1
msapIgmpSnpgMcacLagRowStatusThe value of msapIgmpSnpgMcacLagRowStatus is used for creation and deletion of lag constraint in a CAC policy.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.47.1.2
msapIgmpSnpgMcacLagLastChangedThe value of msapIgmpSnpgMcacLagLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.47.1.3
msapIgmpSnpgMcacLagLevelThe value of msapIgmpSnpgMcacLagLevel specifies the level id to use when the value of msapIgmpSnpgMcacLagPortsDown matches the actual number of ports down in a lag. Using the value of msapIgmpSnpgMcacLagLevel as an index, the operational MSAP unconstrained bandwidth will be set to msapIgmpSnpgMcacLevelBW. By default, for all lag constraints the link level will be set to 1 at row creation.rw
Unsigned32
.1.3.6.1.4.1.6527.3.1.2.4.3.47.1.4
msapInfoTableA table that contains Managed SAP information.
SEQUENCE OF MSapInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.48
msapInfoEntryInformation about a specific Managed SAP.
MSapInfoEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.48.1
msapInfoCreationSapPortEncapValThe value of msapInfoCreationSapPortEncapVal indicates the port encapsulation value of the SAP with a sapSubType value of 'capture' that created this MSAP.ro
TmnxEncapVal (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.48.1.1
msapInfoCreationPlcyNameThe value of msapInfoCreationPlcyName indicates the value of the msapPlcyName object for MSAP policy used to create this MSAP.ro
TNamedItem (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.48.1.2
msapInfoReEvalPolicyThe value of msapInfoReEvalPolicy specifies whether to re-apply the Managed SAP policy associated with this MSAP. When a SET of this object is done with a value of 'doAction', the system will attempt to re-apply the MSAP policy indicated by msapInfoCreationPlcyName. If this action is successful, 'noError' will be returned. If this action is unsuccessful, an 'inconsistentValue' error will be returned. Attempting to SET this object with a value of 'notApplicable' will have no effect and will return 'noError'. SNMP GET and GETNEXT requests on this object will return 'notApplicable'.rw
TmnxActionType (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.48.1.3
msapInfoLastChangedThe value of msapInfoLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.48.1.4
msapCaptureSapStatsTableA table that contains statistics for SAPs with a sapSubType value of 'capture'.
SEQUENCE OF MSapCaptureSapStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.49
msapCaptureSapStatsEntryStatistics for a specific 'capture' SAP.
MSapCaptureSapStatsEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.49.1
msapCaptureSapStatsTriggerTypeThe value of msapCaptureSapStatsTriggerType indicates the type of trigger packets this entry is for.
Enumeration
.1.3.6.1.4.1.6527.3.1.2.4.3.49.1.1
msapCaptureSapStatsPktsRecvdThe value of msapCaptureSapStatsPktsRecvd indicates the number of packets received on this 'capture' SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.49.1.2
msapCaptureSapStatsPktsRedirectThe value of msapCaptureSapStatsPktsRedirect indicates the number of packets redirected on this 'capture' SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.49.1.3
msapCaptureSapStatsPktsDroppedThe value of msapCaptureSapStatsPktsDropped indicates the number of packets dropped on this 'capture' SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.49.1.4
sapTlsMrpTableThe sapTlsMrpTable augments sapTlsInfoTable with attributes of the Multiple Registration Protocol (MRP) feature for the TLS SAP.
SEQUENCE OF SapTlsMrpEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.50
sapTlsMrpEntryMRP specific information about a SAP in a TLS.
SapTlsMrpEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.50.1
sapTlsMrpRxPdusThe value of sapTlsMrpRxPdus indicates the number of MRP packets received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.50.1.1
sapTlsMrpDroppedPdusThe value of sapTlsMrpDroppedPdus indicates the number of dropped MRP packets on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.50.1.2
sapTlsMrpTxPdusThe value of sapTlsMrpTxPdus indicates the number of MRP packets transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.50.1.3
sapTlsMrpRxNewEventThe value of sapTlsMrpRxNewEvent indicates the number of 'New' MRP events received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.50.1.4
sapTlsMrpRxJoinInEventThe value of sapTlsMrpRxJoinInEvent indicates the number of 'Join-In' MRP events received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.50.1.5
sapTlsMrpRxInEventThe value of sapTlsMrpRxInEvent indicates the number of 'In' MRP events received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.50.1.6
sapTlsMrpRxJoinEmptyEventThe value of sapTlsMrpRxJoinEmptyEvent indicates the number of 'Join Empty' MRP events received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.50.1.7
sapTlsMrpRxEmptyEventThe value of sapTlsMrpRxEmptyEvent indicates the number of 'Empty' MRP events received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.50.1.8
sapTlsMrpRxLeaveEventThe value of sapTlsMrpRxLeaveEvent indicates the number of 'Leave' MRP events received on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.50.1.9
sapTlsMrpTxNewEventThe value of sapTlsMrpTxNewEvent indicates the number of 'New' MRP events transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.50.1.10
sapTlsMrpTxJoinInEventThe value of sapTlsMrpTxJoinInEvent indicates the number of 'Join-In' MRP events transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.50.1.11
sapTlsMrpTxInEventThe value of sapTlsMrpTxInEvent indicates the number of 'In' MRP events transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.50.1.12
sapTlsMrpTxJoinEmptyEventThe value of sapTlsMrpTxJoinEmptyEvent indicates the number of 'Join Empty' MRP events transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.50.1.13
sapTlsMrpTxEmptyEventThe value of sapTlsMrpTxEmptyEvent indicates the number of 'Empty' MRP events transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.50.1.14
sapTlsMrpTxLeaveEventThe value of sapTlsMrpTxLeaveEvent indicates the number of 'Leave' MRP events transmitted on this SAP.ro
Counter32
.1.3.6.1.4.1.6527.3.1.2.4.3.50.1.15
sapTlsMmrpTableThis table contains an entry for each MAC address managed by Multiple MAC Registration Protocol (MMRP) on the SAP for the TLS. Entries are dynamically created and destroyed by the system as the MAC Addresses are registered or declared in MMRP.
SEQUENCE OF SapTlsMmrpEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.51
sapTlsMmrpEntryMMRP specific information about a MAC address managed by MMRP on a SAP in a TLS.
SapTlsMmrpEntry
.1.3.6.1.4.1.6527.3.1.2.4.3.51.1
sapTlsMmrpMacAddrThe value of sapTlsMmrpMacAddr indicates an ethernet MAC address which is being managed by MMRP on this SAP.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.51.1.1
sapTlsMmrpDeclaredThe value of sapTlsMmrpDeclared indicates whether the MRP applicant on this SAP is declaring this MAC address on behalf of MMRP.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.51.1.2
sapTlsMmrpRegisteredThe value of sapTlsMmrpRegistered indicates whether the MRP registrant on this SAP has notified MMRP of a registration of this MAC address.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.51.1.3
msapPlcyTblLastChgdThe value of msapPlcyTblLastChgd indicates the sysUpTime at the time of the last modification of msapPlcyTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.59
msapTlsPlcyTblLastChgdThe value of msapTlsPlcyTblLastChgd indicates the sysUpTime at the time of the last modification of msapTlsPlcyTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.60
msapIgmpSnpgMcacLvlTblLastChgdThe value of msapIgmpSnpgMcacLvlTblLastChgd indicates the sysUpTime at the time of the last modification of msapIgmpSnpgMcacLevelTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.61
msapIgmpSnpgMcacLagTblLastChgdThe value of msapIgmpSnpgMcacLagTblLastChgd indicates the sysUpTime at the time of the last modification of msapIgmpSnpgMcacLagTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.62
msapInfoTblLastChgdThe value of msapInfoTblLastChgd indicates the sysUpTime at the time of the last modification of msapInfoTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.63
tmnxSapNotifyObjs
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.3.1.2.4.3.100
sapNotifyPortIdThe ID of the access port where a SAP is defined. This object is used by the sapPortStateChangeProcessed notification to indicate the port ID that changed state and that resulted in having the associated sapStatusChanged events suppressed for all SAPs on that port.ro
TmnxPortID (ALCATEL-IND1-TIMETRA-TC-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.100.1
msapStatusThe status of the Managed SAP which is used by the msapStateChanged notification to indicate what state the Managed SAP has entered: 'created', 'modified', or 'deleted'.ro
ConfigStatus (ALCATEL-IND1-TIMETRA-SERV-MIB)
.1.3.6.1.4.1.6527.3.1.2.4.3.100.2
svcManagedSapCreationErrorThe value of the object svcManagedSapCreationError indicates the reason why the system was unable to create the managed SAP.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6527.3.1.2.4.3.100.3
sapTrapsPrefix
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.3.1.3.4.3
sapTraps
OBJECT IDENTIFIER
.1.3.6.1.4.1.6527.3.1.3.4.3.0
sapCreatedThis trap is sent when a new row is created in the sapBaseInfoTable.obsolete
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.1
sapDeletedThis trap is sent when an existing row is deleted from the sapBaseInfoTable.obsolete
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.2
sapStatusChangedThe sapStatusChanged notification is generated when there is a change in the administrative or operating status of an SAP. Notice that this trap is not generated whenever the SAP operating status change is caused by an operating status change on the associated access port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.3
sapTlsMacAddrLimitAlarmRaisedThe trap sapTlsMacAddrLimitAlarmRaised is sent whenever the number of MAC addresses stored in the FDB for this SAP increases to reach the watermark specified by the object svcTlsFdbTableFullHighWatermark.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.4
sapTlsMacAddrLimitAlarmClearedThe trap sapTlsMacAddrLimitAlarmCleared is sent whenever the number of MAC addresses stored in the FDB for this SAP drops to the watermark specified by the object svcTlsFdbTableFullLowWatermark.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.5
sapTlsDHCPLseStEntriesExceededThe sapTlsDHCPLseStEntriesExceeded notification is generated when the number of DHCP lease states entries on a given SAP reaches a user configurable upper limit given by sapTlsDhcpLeasePopulate.obsolete
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.6
sapTlsDHCPLeaseStateOverrideThe sapTlsDHCPLeaseStateOverride notification is generated when an existing DHCP lease state is overridden by a new lease state which has the same IP address but a different MAC address.obsolete
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.7
sapTlsDHCPSuspiciousPcktRcvdThe sapTlsDHCPSuspiciousPcktRcvd notification is generated when a DHCP packet is received with suspicious content.obsolete
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.8
sapDHCPLeaseEntriesExceededThe sapDHCPLeaseEntriesExceeded notification is generated when the number of DHCP lease state entries on a given SAP reaches a user configurable upper limit. This limit is given by sapTlsDhcpLeasePopulate for a TLS service and by ALCATEL-IND1-TIMETRA-VRTR-MIB::vRtrIfDHCPLeasePopulate for an IES or VPRN service.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.9
sapDHCPLseStateOverrideThe sapDHCPLseStateOverride notification is generated when an existing DHCP lease state is overridden by a new lease state which has the same IP address but a different MAC address.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.10
sapDHCPSuspiciousPcktRcvdThe sapDHCPSuspiciousPcktRcvd notification is generated when a DHCP packet is received with suspicious content.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.11
sapDHCPLseStatePopulateErrThe sapDHCPLseStatePopulateErr notification indicates that the system was unable to update the DHCP Lease State table with the information contained in the DHCP ACK message. The DHCP ACK message has been discarded.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.12
hostConnectivityLostThe hostConnectivityLost notification indicates that the system lost the connectivity with the indicated host.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.13
hostConnectivityRestoredThe hostConnectivityRestored notification indicates that the system has restored the connectivity with the indicated host.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.14
sapReceivedProtSrcMacThe sapReceivedProtSrcMac notification is generated when a protected source MAC is received on a TLS SAP with sapTlsRestProtSrcMac 'true' and sapTlsRestProtSrcMacAction 'alarm-only', or if the TLS SAP belongs to an SHG with tlsShgRestProtSrcMac 'true' and tlsShgRestProtSrcMacAction 'alarm-only'.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.15
sapStaticHostDynMacConflictThe sapStaticHostDynMacConflict notification indicates that the system is trying to learn a conflicting IP-only static host dynamic MAC address (sapStaticHostDynMacAddress).
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.16
sapTlsMacMoveExceededThe sapTlsMacMoveExceeded notification is generated when the SAP exceeds the TLS svcTlsMacMoveMaxRate.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.17
sapDHCPProxyServerErrorThe sapDHCPProxyServerError notification indicates that the system was unable to proxy DHCP requests.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.18
sapDHCPCoAErrorThe sapDHCPCoAError notification indicates that the system was unable to process a Change of Authorization (CoA) request from a Radius server.obsolete
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.19
sapDHCPSubAuthErrorThe sapDHCPSubAuthError notification indicates that the system encountered a problem while trying to authenticate a subscriber.obsolete
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.20
sapPortStateChangeProcessedThe sapPortStateChangeProcessed notification indicates that the agent has finished processing an access port state change event, and that the operating status of all the affected SAP's has been updated accordingly. The value of the sapNotifyPortId object indicates the ID of the port that experienced the state change.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.21
sapDHCPLseStateMobilityErrorThe sapDHCPLseStateMobilityError notification indicates that the system was unable to perform a mobility check for this lease state.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.22
sapCemPacketDefectAlarmGenerated when a CEM SAP alarm condition is detected. It is generated only when the packet error indicated by 'sapCemReportAlarmStatus' persists over a 3 second window.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.23
sapCemPacketDefectAlarmClearGenerated when a CEM SAP alarm condition is cleared. It is generated only when the packet error indicated by 'sapCemReportAlarmStatus' no longer persists over a 10 second window.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.24
msapStateChangedThe msapStateChanged notification is generated when a Managed SAP is 'created', 'modified', or 'deleted', with the value of msapStatus indicated which state it has entered.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.25
msapCreationFailureThe trap msapCreationFailure is sent whenever the system fails to create a managed SAP. The svcId, svcVpnId, sapPortId and sapEncapValue are those of the capturing SAP.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.3.0.26
topologyChangeSapMajorStateThe topologyChangeSapMajorState notification is generated when a SAP has transitioned its state from learning to forwarding or from forwarding to blocking or broken. The spanning tree topology has been modified and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine the severity of connectivity loss.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.5.0.1
newRootSapThe newRootSap notification is generated when the previous root bridge has been aged out and a new root bridge has been elected. A new root bridge creates a new spanning tree topology and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine the severity of connectivity loss.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.5.0.2
topologyChangeSapStateThe topologyChangeSapState notification is generated when a SAP has transitioned state to blocking or broken from a state other than forwarding. This event complements what is not covered by topologyChangeSapMajorState. The spanning tree topology has been modified and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine severity of connectivity loss.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.5.0.5
receivedTCNThe receivedTCN notification is generated when a SAP has received TCN from another bridge. This bridge will either have its configured BPDU with the topology change flag set if it is a root bridge, or it will pass TCN to its root bridge. Eventually the address aging timer for the forwarding database will be made shorter for a short period of time. No recovery is needed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.5.0.6
higherPriorityBridgeThe higherPriorityBridge notification is generated when a customer's device has been configured with a bridge priority equal to zero. The SAP that the customer's device is connected through will be blocked. Remove the customer's device or reconfigure the customer's bridge priority with a value greater than zero.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.5.0.9
bridgedTLSThe bridgedTLS notification is generated when a configuration BPDU has been received that identifies that another TLS with a different VPNID is attempting to bridge with this TLS. At least one ESR participating within one of the TLS that is locally connected must have an active VCP for this to be seen. The SAP that the configuration BPDU is received on will be blocked to prevent the TLS to TLS bridging. Reconfigure the bridged TLS into a single TLS or remove the connectivity.obsolete
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.5.0.10
sapEncapPVSTThe sapEncapPVST notification is generated when the SAP receives a BPDU that is PVST encapsulated, after having received BPDUs that were 802.d encapsulated. The SAP BPDUs will also be PVST encapsulated. No recovery is needed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.5.0.11
sapEncapDot1dThe sapEncapDot1d notification is generated when the SAP receives a BPDU that is 802.1d encapsulated after having received BPDUs that were PVST encapsulated. The SAP BPDUs will also be 802.1d encapsulated. No recovery is needed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.5.0.12
sapReceiveOwnBpduThe sapReceiveOwnBpdu notification is generated when the SAP STP received it's own BPDU.obsolete
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.5.0.13
sapActiveProtocolChangeThe sapActiveProtocolChange notification is generated when the spanning tree protocol on this SAP changes from rstp to stp or vise versa. No recovery is needed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.5.0.30
tmnxStpRootGuardViolationThe tmnxStpRootGuardViolation notification is generated when a SAP which has root-guard configured is trying to become root (has a better STP priority vector). The SAP will become alternate and traffic will be blocked.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.5.0.35
tmnxSapStpExcepCondStateChngThe tmnxSapStpExcepCondStateChng notification is generated when the value of the object sapTlsStpException has changed, i.e. when the exception condition changes on the indicated SAP.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6527.3.1.3.4.5.0.37
ALCATEL-IND1-TIMETRA-SAP-MIB - SNMP MIB Reference | MIBs Explorer