ALCATEL-IND1-TIMETRA-MPLS-MIB
AI MIB Summary
The ALCATEL-IND1-TIMETRA-MPLS-MIB enables SNMP-based provisioning and monitoring of Multiprotocol Label Switching (MPLS) extensions and parameters on Alcatel-Lucent 7x50 series routers. It facilitates the management of MPLS-specific operational states, including label distribution, tunnel configurations, and forwarding information base (FIB) entries specific to the Timetra operating environment.
This document is the SNMP MIB module to manage and provision the MPLS extensions for the Alcatel 7x50 device.
Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions.
Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies.
This Specification is supplied 'as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
timetraMplsMIBModule.1.3.6.1.4.1.6527.1.1.3.6
233
Objects
Active
Status
10
Dependencies
Imported Objects
Objects
233 total| Object Name |
|---|
timetraMplsMIBModuleThis document is the SNMP MIB module to manage and provision the
MPLS extensions for the Alcatel 7x50 device.
Copyright 2003-2008 Alcatel-Lucent. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel's
proprietary intellectual property. Alcatel retains
all title and ownership in the Specification, including any
revisions.
Alcatel grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Alcatel
products, and without fee, provided this copyright notice and
license appear on all copies.
This Specification is supplied 'as is', and Alcatel
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.6527.1.1.3.6 |
tmnxMplsConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.6 |
tmnxMplsCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.6.1 |
tmnxMplsGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.6.2 |
tmnxMplsObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.6 |
vRtrMplsLspTableThe vRtrMplsLspTable has an entry for each Labeled Switch
Path (LSP) configured for a virtual router in the system. SEQUENCE OF VRtrMplsLspEntry .1.3.6.1.4.1.6527.3.1.2.6.1 |
vRtrMplsLspEntryEach row entry represents a Labeled Switch Path (LSP) configured
for a virtual router in the system. Entries can be created and
deleted via SNMP SET operations. Setting RowStatus to 'active'
requires vRtrMplsLspName to have been assigned a valid value. VRtrMplsLspEntry .1.3.6.1.4.1.6527.3.1.2.6.1.1 |
vRtrMplsLspIndexThe unique value which identifies this Labeled Switch
Path (LSP) for this virtual router in the Alcatel 7x50
SR system. It is a unique value among entries with the
same value of vRtrID.ro TmnxVRtrMplsLspID (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.6.1.1.1 |
vRtrMplsLspRowStatusThe row status used for creation, deletion, or control
of vRtrMplsLspTable entries. Before the row can be
placed into the 'active' state vRtrMplsLspName must
have been assigned a valid value.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.1.1.2 |
vRtrMplsLspLastChangeThe sysUpTime when this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.1.1.3 |
vRtrMplsLspNameAdministrative name for this Labeled Switch Path.
The vRtrMplsLspName must be unique within a virtual
router instance.rw TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.6.1.1.4 |
vRtrMplsLspAdminStateThe desired administrative state for this LSP.rw TmnxAdminState (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.6.1.1.5 |
vRtrMplsLspOperStateThe current operational state of this LSP.ro TmnxOperState (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.6.1.1.6 |
vRtrMplsLspFromAddrSource IP address of this LSP. If vRtrMplsLspFromAddr has not
been explicitly set, the system IP address will be used.rw IpAddress .1.3.6.1.4.1.6527.3.1.2.6.1.1.7 |
vRtrMplsLspToAddrDestination IP address of this LSP. This LSP will not be
signaled until vRtrMplsLspToAddr is explicitly set.rw IpAddress .1.3.6.1.4.1.6527.3.1.2.6.1.1.8 |
vRtrMplsLspTypeThe vRtrMplsLspType object is an enumerated value that indicates
whether the label value is statically or dynamically assigned or
whether the LSP will be used exclusively for bypass protection.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.6.1.1.9 |
vRtrMplsLspOutSegIndxThe vRtrMplsLspOutSegIndx is the index value of the entry in
the mplsOutSegmentTable associated with this vRtrMplsLspEntry
when vRtrMplsLspType is 'static'. If vRtrMplsLspType is
'dynamic', the value of this object will be zero (0).rw Integer32 .1.3.6.1.4.1.6527.3.1.2.6.1.1.10 |
vRtrMplsLspRetryTimerThe value of vRtrMplsLspRetryTimer specifies the time in seconds
the software will wait before attempting the establish the
failed LSP.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.1.1.11 |
vRtrMplsLspRetryLimitThe value of vRtrMplsLspRetryLimit specifies the number of
attempts the software should make to reestablish a failed LSP
before the LSP is disabled. A value of 0 indicates that an
infinite number of retry attempts should be made.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.1.1.12 |
vRtrMplsLspMetricThe value of vRtrMplsLspMetric specifies the metric for this
LSP which is used to select an LSP among a set of LSPs which are
destined to the same egress 7x50 router. The LSP with the lowest
metric will be selected.
In LDP-over-RSVP, LDP performs a lookup in the Routing Table
Manager (RTM) which provides the next hop to the destination PE
and the advertising router (ABR or destination PE itself). If the
advertising router matches the targeted LDP peer, LDP then
performs a second lookup for the advertising router in the Tunnel
Table Manager (TTM). This lookup returns the best RSVP LSP to use
to forward packets for an LDP FEC learned through the targeted
LDP session. The lookup returns the LSP with the lowest metric.
If multiple LSPs have the same metric, then the result of the
lookup will be to select the first one available in the TTM.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.1.1.13 |
vRtrMplsLspDecrementTtlWhen the value of vRtrMplsLspDecrementTtl is 'true', the ingress
ESR writes the TTL of the IP packet into the label and each
transit ESR decrements the TTL in the label. At the egress ESR
the TTL value from the label is written into the IP packet.
When the value of vRtrMplsLspDecrementTtl is 'false', the ingress
ESR ignores the IP packet TTL and writes the value of 255 into the
label; and the egress ESR does not write the label's TTL into the
IP packet.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.1.1.14 |
vRtrMplsLspCspfWhen the value of vRtrMplsLspCspf is 'true', CSPF computation
for constrained-path LSP is enabled. When the value of
vRtrMplsLspCspf is 'false' CSPF computation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.1.1.15 |
vRtrMplsLspFastRerouteWhen the value of vRtrMplsLspFastReroute is 'true', fast reroute
is enabled. A pre-computed detour LSP is created from each node
in the primary path of this LSP. In case of a failure of a link
or LSP between two nodes, traffic is immediately rerouted on the
pre-computed detour LSP thus avoiding packet loss. Each node
along the primary path of the LSP tries to establish a detour LSP
as follows: Each upstream node will setup a detour LSP that
avoids only the immediate downstream node and merges back onto
the actual path of the LSP as soon as possible. The detour LSP
may take one or more hops (upto the value of vRtrMplsLspFRHopLimit)
before merging back onto the main LSP path.
When the upstream node detects a downstream link or node failure,
it immediately send traffic for that LSP on the detour path and
at the same time signals back to the ingress ESR about the
failure.
Fast reroute applies only to the primary path of this LSP.
No configuration is required on the transit hops of the LSP.
The ingress ESR will signal all intermediate ESRs using RSVP
to setup their detours.
When the value of vRtrMplsLspFastReroute is 'false', fast
rerouting is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.1.1.16 |
vRtrMplsLspFRHopLimitThe value of vRtrMplsLspFRHopLimit specifies the total number
of hops a detour LSP can take before merging back onto the
main LSP path.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.1.1.17 |
vRtrMplsLspFRBandwidthThe value of vRtrMplsLspFRBandwidth specified the amount of
bandwidth in mega-bits per second (Mbps) to be reserved for the
detour LSP. A value of zero (0) indicates that no bandwidth
is reserved.rw Unsigned32 UNITS "mega-bits per second" .1.3.6.1.4.1.6527.3.1.2.6.1.1.18 |
vRtrMplsLspClassOfServiceThe name of the class of service value to be assigned to all
packets on the LSP is specified with vRtrMplsLspClassOfService.
The EXP bits in the MPLS header are set based on the global
mapping table that specified the mapping between the forwarding
class and the EXP bits. When class of service is specified,
all packets will be marked with the same EXP bits that match
the vRtrMplsLspClassOfService name in the mapping table.
An empty string, ''H, specifies no class of service. Packets
are assigned EXP bits based on the same mapping table, however
each packet is marked with EXP bits based on the forwarding
class from which it is serviced.
When the value of vRtrMplsLspPathCosSource is set to 'inherit',
the value of vRtrMplsLspClassOfService is applied to that
specific LSP/path.rw TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.6.1.1.19 |
vRtrMplsLspSetupPriorityThe value of vRtrMplsLspSetupPriority specifies the setup priority
to use when insufficient bandwidth is available to setup a LSP.
The setup priority is compared against the hold priority of
existing LSPs. If the setup priority is higher than the hold
priority of the established LSPs, this LSP may preempt the other
LSPs. A value of zero (0) is the highest priority and a value
of seven (7) is the lowest priority.
When the value of vRtrMplsLspPathSetupPriority is set to '-1',
the value of vRtrMplsLspSetupPriority is applied to that specific
LSP/path.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.1.1.20 |
vRtrMplsLspHoldPriorityThe value of vRtrMplsLspHoldPriority specifies the hold priority
to use when insufficient bandwidth is available to setup a LSP.
The setup priority is compared against the hold priority of
existing LSPs. If the setup priority is higher than the hold
priority of the established LSPs, this LSP may preempt the other
LSPs. A value of zero (0) is the highest priority and a value
of seven (7) is the lowest priority.
When the value of vRtrMplsLspPathHoldPriority is set to '-1',
the value of vRtrMplsLspHoldPriority is applied to that specific
LSP/path.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.1.1.21 |
vRtrMplsLspRecordWhen the value of vRtrMplsLspRecord is 'true', recording of all
the hops that a LSP traverses is enabled.
When the value of vRtrMplsLspRecord is 'false, recording of all
the hops that a LSP traverses is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.1.1.22 |
vRtrMplsLspPreferenceThe value of vRtrMplsLspPreference specifies the preference for
the LSP. This value is used for load balancing between multiple
LSPs that exist between the same ingress and egress routers.
By default, traffic is load balanced among the LSPs, since all
LSPs have the same preference. To prefer one LSP over another,
change the preference value for that LSP. The LSP with the
lowest preference is used.
When the value of vRtrMplsLspPathPreference is set to zero (0),
the value of vRtrMplsLspPreference is applied to that specific
LSP/path.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.1.1.23 |
vRtrMplsLspBandwidthThe value of vRtrMplsLspBandwidth specifies the amount of
bandwidth in mega-bits per second (Mbps) to be reserved for the LSP.
A value of zero (0) indicates that no bandwidth is reserved.
When vRtrMplsLspPathBandwidth is set to -1, the value of
vRtrMplsLspBandwidth is applied to that specific LSP/path.rw Integer32 UNITS "mega-bits per second" .1.3.6.1.4.1.6527.3.1.2.6.1.1.24 |
vRtrMplsLspBwProtectWhen vRtrMplsLspBwProtect has a value of 'true', bandwidth
protection is enabled on a LSP. LSPs that reserve bandwidth
will be used for EF services where customers need guaranteed
bandwidth. It is expected that multiple EF services will be
assigned to a single LSP. When bandwidth protection is
enabled on an LSP, each time this LSP is used for a certain
service the bandwidth allocated on that service is deducted
from the bandwidth reserved for the LSP. Once the bandwidth is
exhausted on the LSP, the ESR will provide feedback to the
provider indicating that this LSP has exhausted its resources.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.1.1.25 |
vRtrMplsLspHopLimitThe value of vRtrMplsLspHopLimit specifies the maximum number
of hops that a LSP will traverse including the ingress and
egress ESRs. A LSP will not be setup if the hop limit is
exceeded.
When the value of vRtrMplsLspPathHopLimit is set to zero (0),
the value of vRtrMplsLspHopLimit is applied to that specific
LSP/path.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.1.1.26 |
vRtrMplsLspNegotiatedMTUThe value of vRtrMplsLspNegotiatedMTU specifies the size
for the Maximum transmission unit (MTU) that is negotiated
during LSP establishment.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.1.1.27 |
vRtrMplsLspRsvpResvStyleThe value of vRtrMplsLspRsvpResvStyle specifies the reservation
style for RSVP. The reservation style can be set to 'Shared-
Explicit' (se) or 'Fixed-Filter' (ff).rw Enumeration .1.3.6.1.4.1.6527.3.1.2.6.1.1.28 |
vRtrMplsLspRsvpAdspecWhen the value of vRtrMplsLspRsvpAdspec is 'true', the ADSPEC
object will be included in RSVP messages.
When the value of vRtrMplsLspRsvpAdspec is 'false', the ADSPEC
object will not be included in RSVP messages.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.1.1.29 |
vRtrMplsLspFRMethodThe value of vRtrMplsLspFRMethod specifies the fast reroute
method used.
In the 'One-to-one Backup' method, a backup LSP is established
which will intersect the original LSP somewhere downstream
of the point of link or node failure. For each LSP that is
backed up, a separate backup LSP is established.
In the 'Facility Backup' method, instead of creating a separate
LSP for every LSP that is to be backed up, a single LSP is
created which serves as a backup for a set of LSPs. Such an LSP
tunnel is called a 'bypass tunnel'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.6.1.1.30 |
vRtrMplsLspFRNodeProtectSetting the value of vRtrMplsLspFRNodeProtect to 'true' enables
node protection i.e. protection against the failure of a node on
the LSP.
Setting the value to 'false' disables node protection.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.1.1.31 |
vRtrMplsLspAdminGroupIncludeThe value of vRtrMplsLspAdminGroupInclude is a bit-map that
specifies a list of admin groups that should be included when
this LSP is setup. If bit 'n' is set, then the admin group
with value 'n' is included for this LSP. This implies that
each link that this LSP goes through must be associated with
at least one of the admin groups in the include list.
By default, all admin groups are in the include list.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.1.1.32 |
vRtrMplsLspAdminGroupExcludeThe value of vRtrMplsLspAdminGroupExclude is a bit-map that
specifies a list of admin groups that should be excluded when
this LSP is setup. If bit 'n' is set, then the admin group
with value 'n' is excluded for this LSP. This implies that
each link that this LSP goes through must not be associated
with any of the admin groups in the exclude list.
By default, no admin groups are in the exclude list.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.1.1.33 |
vRtrMplsLspAdaptiveSetting the value of vRtrMplsLspAdaptive to 'true' enables
make-before-break functionality for the LSP. When the attributes
of an already established LSP are changed, either through manual
configuration or due to a change in network topology,
make-before-break functionality ensures that the resources of
the existing LSP will not be released until a new path (with the
same LSP Id) has been established and traffic flowing over the
existing path is seamlessly transferred to the new path.
Setting the value to 'false' disables make-before-break
functionality.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.1.1.34 |
vRtrMplsLspInheritanceFor each writable object in this row that can be configured to
inherit its value from the corresponding object in the
vRtrMplsGeneralTable, there is bit within vRtrMplsLspInheritance
that controls whether to inherit the operational value of the
object or use the administratively set value.
This object is a bit-mask, with the following positions:
vRtrMplsLspOptimizeTimer 0x1
vRtrMplsLspFRObject 0x2
When the bit for an object is set to one, then the object's
administrative and operational value are whatever the DEFVAL
or most recently SET value is.
When the bit for an object is set to zero, then the object's
administrative and operational value are inherited from the
corresponding object in vRtrMplsGeneralTable.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.1.1.35 |
vRtrMplsLspOptimizeTimerThe value of vRtrMplsLspOptimizeTimer specifies the time, in
seconds, the software will wait before attempting to re-optimize
the LSP.
When CSPF is enabled, changes in the network topology may cause
the existing path of a loose-hop LSP to become sub-optimal. Such
LSPs can be re-optimized and re-routed through more optimal paths
by recalculating the path for the LSP at periodic intervals. This
interval is controlled by the optimize timer.
A value of 0 indicates that optimization has been disabled.
When the vRtrMplsLspOptimizeTimer bit in vRtrMplsLspInheritance
is cleared (0), the value returned in the GET request is inherited
from vRtrMplsGeneralOptimizeTimer.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.1.1.36 |
vRtrMplsLspOperFastRerouteThe value of vRtrMplsLspOperFastReroute specifies whether the
operational LSP has fast reroute enabled or disabled.
When make-before-break functionality for the LSP is enabled and
if the fast reroute setting is changed, the resources for the
existing LSP will not be released until a new path with the new
attribute settings has been established. While a new path is
being signaled, the administrative value and the operational
values of fast reroute setting for the LSP may differ. The value
of vRtrMplsLspFastReroute specifies the setting used for the new
LSP path trying to be established whereas the value of
vRtrMplsLspOperFastReroute specifies the setting for the existing
LSP path.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.1.1.37 |
vRtrMplsLspFRObjectThe value of vRtrMplsLspFRObject specifies whether fast reroute,
for LSPs using 'Facility Backup', is signalled with or without
the fast reroute object. The value of vRtrMplsLspFRObject is
ignored if fast reroute is disabled for the LSP or if the LSP
is using 'One-to-one Backup'.
When the vRtrMplsLspFRObject bit in vRtrMplsLspInheritance is
cleared (0), the value returned in the GET request is inherited
from vRtrMplsGeneralFRObject.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.1.1.38 |
vRtrMplsLspHoldTimerThe value of vRtrMplsLspHoldTimer specifies the time, in
seconds, for which the ingress node holds a bit before
programming its data plane and declaring the lsp up to
the service module.
The value of vRtrMplsLspHoldTimer is inherited from
the value of vRtrMplsGeneralHoldTimer.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.1.1.39 |
vRtrMplsLspCspfTeMetricEnabledThe value of vRtrMplsLspCspfTeMetricEnabled specifies whether the TE
metric would be used for the purpose of the LSP path computation by CSPF.
When the value of this object is 'false', the IGP metric is used to
compute the path of the LSP by CSPF.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.1.1.40 |
vRtrMplsLspStatTableThe vRtrMplsLspStatTable has an entry for each Labeled Switch
Path (LSP) configured for a virtual router in the system. SEQUENCE OF VRtrMplsLspStatEntry .1.3.6.1.4.1.6527.3.1.2.6.2 |
vRtrMplsLspStatEntryEach row entry represents a collection of statistics for a
Labeled Switch Path (LSP) configured for a virtual router in
the system.
Entries cannot be created and deleted via SNMP SET operations. VRtrMplsLspStatEntry .1.3.6.1.4.1.6527.3.1.2.6.2.1 |
vRtrMplsLspOctetsThe number of octets that have been forwarded over current
LSP active path. The number reported is not realtime, may
be subject to several minutes delay. The delay is controllable
by MPLS statistics gathering interval, which by default is
once every 5 minutes. If MPLS statistics gathering is not
enabled, this number will not increment.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.6.2.1.1 |
vRtrMplsLspPacketsThe number of packets that have been forwarded over current
LSP active path. The number reported is not realtime, may
be subject to several minutes delay. The delay is controllable
by MPLS statistics gathering interval, which by default is
once every 5 minutes. If MPLS statistics gathering is not
enabled, this number will not increment.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.6.2.1.2 |
vRtrMplsLspAgeThe age (i.e., time from creation till now) of this LSP in
10-millisecond periods.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.2.1.3 |
vRtrMplsLspTimeUpThe total time in 10-millisecond units that this LSP has been
been operational. For example, the percentage up time can be
determined by computing (vRtrMplsLspTimeUp/vRtrMplsLspAge * 100 %).ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.2.1.4 |
vRtrMplsLspTimeDownThe total time in 10-millisecond units that this LSP has not
been operational.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.2.1.5 |
vRtrMplsLspPrimaryTimeUpThe total time in 10-millisecond units that this LSP's primary
path has been operational. For example, the percentage
contribution of the primary path to the operational time is
given by (vRtrMplsLspPrimaryTimeUp/vRtrMplsLspTimeUp * 100) %.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.2.1.6 |
vRtrMplsLspTransitionsThe number of state transitions (up -> down and down -> up)
this LSP has undergone.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.6.2.1.7 |
vRtrMplsLspLastTransitionThe time in 10-millisecond units since the last transition
occurred on this LSP.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.2.1.8 |
vRtrMplsLspPathChangesThe number of path changes this LSP has had. For every path
change (path down, path up, path change), a corresponding
syslog/trap (if enabled) is generated for it.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.6.2.1.9 |
vRtrMplsLspLastPathChangeThe time in 10-millisecond units since the last change
occurred on this LSP.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.2.1.10 |
vRtrMplsLspConfiguredPathsThe number of paths configured for this LSP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.6.2.1.11 |
vRtrMplsLspStandbyPathsThe number of standby paths configured for this LSP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.6.2.1.12 |
vRtrMplsLspOperationalPathsThe number of operational paths for this LSP. This includes
the path currently active, as well as operational standby
paths.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.6.2.1.13 |
vRtrMplsLspPathTableSpinlockvoluntary serialization control for vRtrMplsLspPathTable.
Primarily used by SNMP manager to coordinate changes to
vRtrMplsLspPathInheritance.rw TestAndIncr (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.3 |
vRtrMplsLspPathTableThe vRtrMplsLspPathTable provides an association between an
LSP and a path. An LSP can have more than one path association,
but only one of those paths can be specified as the primary
path type. Paths are defined in as Tunnel entries in the
mplsTunnelTable in the MPLS-TE-MIB. SEQUENCE OF VRtrMplsLspPathEntry .1.3.6.1.4.1.6527.3.1.2.6.4 |
vRtrMplsLspPathEntryEach row entry represents an association between a Labeled Switch
Path (LSP) in the vRtrMplsLspTable and a path (or tunnel) entry in
the mplsTunnelTable. Entries in this table can be created and
deleted via SNMP SET operations. Setting RowStatus to 'active'
requires vRtrMplsLspPathType to have been assigned a valid value. VRtrMplsLspPathEntry .1.3.6.1.4.1.6527.3.1.2.6.4.1 |
vRtrMplsLspPathRowStatusThe row status used for creation, deletion, or control
of vRtrMplsLspPathTable entries. Before the row can be
placed into the 'active' state vRtrMplsLspPathType must
have been assigned a valid value.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.4.1.1 |
vRtrMplsLspPathLastChangeThe sysUpTime when this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.4.1.2 |
vRtrMplsLspPathTypeThis variable is an enum that represents the role this
path is taking within this LSP.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.6.4.1.3 |
vRtrMplsLspPathCosThe configured Class Of Service (COS) for this path. If
the value is between 0 and 7 inclusive, this value
will be inserted in the 3 bit COS field in the label.
If the value is 255, the value in the COS field of
the label will depend on other factors.rw INTEGER (0..7 | 255) .1.3.6.1.4.1.6527.3.1.2.6.4.1.4 |
vRtrMplsLspPathPropertiesThe set of configured properties for this path expressed
as a bit map. For example, if the path is an adaptive
path, the bit corresponding to bit value 1 is set.ro Bits .1.3.6.1.4.1.6527.3.1.2.6.4.1.5 |
vRtrMplsLspPathBandwidthThe value of vRtrMplsLspPathBandwidth specifies the amount
of bandwidth in mega-bits per seconds (Mbps) to be reserved
for this LSP path. A value of zero (0) indicates that no
bandwidth is reserved.rw Integer32 UNITS "mega-bits per second" .1.3.6.1.4.1.6527.3.1.2.6.4.1.6 |
vRtrMplsLspPathBwProtectWhen vRtrMplsLspPathBwProtect has a value of 'true', bandwidth
protection is enabled on a LSP. LSPs that reserve bandwidth
will be used for EF services where customers need guaranteed
bandwidth. It is expected that multiple EF services will be
assigned to a single LSP. When bandwidth protection is
enabled on an LSP, each time this LSP is used for a certain
service the bandwidth allocated on that service is deducted
from the bandwidth reserved for the LSP. Once the bandwidth is
exhausted on the LSP, the ESR will provide feedback to the
provider indicating that this LSP has exhausted its resources.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.4.1.7 |
vRtrMplsLspPathStateThe current working state of this path within this LSP.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.6.4.1.8 |
vRtrMplsLspPathPreferenceWhen there is no path in the LSP with vRtrMplsLspPathType
value of 'primary', 'secondary' type paths of this LSP
with the same value of vRtrMplsLspPathPreference are used
for load sharing. When a 'primary' type path exists in
the LSP, vRtrMplsLspPathPreference is used to denote at
which priority one 'secondary' path will supercede another
when the 'primary' fails. 1 indicates the highest priority
value.
When the vRtrMplsLspPathPreference bit in
vRtrMplsLspPathInheritance is cleared (0), the value returned
to a GET request is inherited from vRtrMplsLspPreference.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.6.4.1.9 |
vRtrMplsLspPathCosSourceWhen vRtrMplsLspPathCosSource is set to 'true', the value of
vRtrMplsLspPathClassOfService overrides vRtrMplsLspClassOfService.
When 'false', the value of vRtrMplsLspClassOfService is used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.4.1.10 |
vRtrMplsLspPathClassOfServiceThe name of the class of service value to be assigned to all
packets on the LSP is specified with vRtrMplsLspPathClassOfService.
The EXP bits in the MPLS header are set based on the global
mapping table that specified the mapping between the forwarding
class and the EXP bits. When class of service is specified,
all packets will be marked with the same EXP bits that match
the vRtrMplsLspPathClassOfService name in the mapping table.
An empty string, ''H, specifies no class of service. Packets
are assigned EXP bits based on the same mapping table, however
each packet is marked with EXP bits based on the forwarding
class from which it is serviced.rw TNamedItemOrEmpty (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.6.4.1.11 |
vRtrMplsLspPathSetupPriorityThe value of vRtrMplsLspPathSetupPriority specifies the setup
priority to use when insufficient bandwidth is available to setup
a LSP. The setup priority is compared against the hold priority of
existing LSPs. If the setup priority is higher than the hold
priority of the established LSPs, this LSP may preempt the other
LSPs. A value of zero (0) is the highest priority and a value
of seven (7) is the lowest priority.
When the vRtrMplsLspPathHopLimit bit in vRtrMplsLspPathInheritance
is cleared (0), the value returned to a GET request is inherited
from vRtrMplsLspHopLimit.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.4.1.12 |
vRtrMplsLspPathHoldPriorityThe value of vRtrMplsLspPathHoldPriority specifies the hold
priority to use when insufficient bandwidth is available to setup
a LSP. The setup priority is compared against the hold priority of
existing LSPs. If the setup priority is higher than the hold
priority of the established LSPs, this LSP may preempt the other
LSPs. A value of zero (0) is the highest priority and a value
of seven (7) is the lowest priority.
When the vRtrMplsLspPathHopLimit bit in vRtrMplsLspPathInheritance
is cleared (0), the value returned to a GET request is inherited
from vRtrMplsLspHopLimit.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.4.1.13 |
vRtrMplsLspPathRecordWhen the value of vRtrMplsLspPathRecord is 'record', recording of
all the hops that a LSP traverses is enabled.
When the value of vRtrMplsLspPathRecord is 'noRecord', recording
of all the hops that a LSP traverses is disabled.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.6.4.1.14 |
vRtrMplsLspPathHopLimitThe value of vRtrMplsLspPathHopLimit specifies the maximum number
of hops that a LSP will traverse including the ingress and
egress ESRs. A LSP will not be setup if the hop limit is
exceeded.
When the vRtrMplsLspPathHopLimit bit in vRtrMplsLspPathInheritance
is cleared (0), the value returned to a GET request is inherited
from vRtrMplsLspHopLimit.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.4.1.15 |
vRtrMplsLspPathSharingWhen vRtrMplsLspPathSharing has a value of 'true', path-sharing
is enabled for the secondary path. Path-sharing is used to
control the hops of the secondary path.
When vRtrMplsLspPathSharing have a value of 'false', CSPF attempts
to find a path for the secondary that does not include any node
or link that is common to the active primary path.
This variable is valid only if vRtrMplsLspPathType is set to
'secondary'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.4.1.16 |
vRtrMplsLspPathAdminStateThe desired administrative state for this LSP path.rw TmnxAdminState (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.6.4.1.17 |
vRtrMplsLspPathOperStateThe current operational state of this LSP path.ro TmnxOperState (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.6.4.1.18 |
vRtrMplsLspPathInheritanceFor each writable object in this row that can be configured to
inherit its value from its corresponding object in the
vRtrMplsLspTable, controls whether to inherit the operational value
of that object, or use the administratively set value.
This object is a bit-mask, with the following positions:
vRtrMplsLspPathBandwidth 0x10
vRtrMplsLspPathPreference 0x80
vRtrMplsLspPathSetupPriority 0x400
vRtrMplsLspPathHoldPriority 0x800
vRtrMplsLspPathHopLimit 0x2000
vRtrMplsLspPathAdminGroupInclude 0x20000
vRtrMplsLspPathAdminGroupExclude 0x40000
vRtrMplsLspPathAdaptive 0x80000
vRtrMplsLspPathOptimizeTimer 0x100000
When the bit for an object is set to one, then the
object's administrative and operational value are whatever
the DEFVAL or most recently SET value is.
When the bit for an object is set to zero, then the
object's administrative and operational value are inherited
from the corresponding object in vRtrMplsLspTable.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.4.1.19 |
vRtrMplsLspPathLspIdThis value identifies the label switched path that
is signaled for this entry.ro MplsLSPID (MPLS-LSR-MIB) .1.3.6.1.4.1.6527.3.1.2.6.4.1.20 |
vRtrMplsLspPathRetryTimeRemainingThe time in 10-millisecond units to signal this path.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.4.1.21 |
vRtrMplsLspPathTunnelARHopListIndexPrimary index into the mplsTunnelARHopTable identifying a
particular recorded hop list. A value of 0 implies that there
is no recored hop list associated with this LSP path.ro Integer32 (0|1..2147483647) .1.3.6.1.4.1.6527.3.1.2.6.4.1.22 |
vRtrMplsLspPathNegotiatedMTUThe value of vRtrMplsLspPathNegotiatedMTU specifies the size
for the Maximum transmission unit (MTU) that is negotiated
during establishment of this LSP Path.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.4.1.23 |
vRtrMplsLspPathFailCodeThe value of vRtrMplsLspPathFailCode specifies the reason code
for LSP Path failure. A value of 0 indicates that no failure
has occurred.ro TmnxMplsLspFailCode .1.3.6.1.4.1.6527.3.1.2.6.4.1.24 |
vRtrMplsLspPathFailNodeAddrThe value of vRtrMplsLspPathFailNodeAddr specifies the IP address
of the node in the LSP path at which the LSP path failed. When
no failure has occurred, this value is 0.ro IpAddress .1.3.6.1.4.1.6527.3.1.2.6.4.1.25 |
vRtrMplsLspPathAdminGroupIncludeThe value of vRtrMplsLspPathAdminGroupInclude is a bit-map that
specifies a list of admin groups that should be included when
this LSP path is setup. If bit 'n' is set, then the admin group
with value 'n' is included for this LSP path. This implies that
each link that this LSP path goes through must be associated with
at least one of the admin groups in the include list.
When the vRtrMplsLspPathAdminGroupInclude bit in
vRtrMplsLspPathInheritance is cleared (0), the value returned
to a GET request is inherited from vRtrMplsLspAdminGroupInclude.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.4.1.26 |
vRtrMplsLspPathAdminGroupExcludeThe value of vRtrMplsLspPathAdminGroupExclude is a bit-map that
specifies a list of admin groups that should be excluded when
this LSP path is setup. If bit 'n' is set, then the admin group
with value 'n' is excluded for this LSP path. This implies that
each link that this LSP path goes through must not be associated
with any of the admin groups in the exclude list.
When the vRtrMplsLspPathAdminGroupExclude bit in
vRtrMplsLspPathInheritance is cleared (0), the value returned
to a GET request is inherited from vRtrMplsLspAdminGroupExclude.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.4.1.27 |
vRtrMplsLspPathAdaptiveSetting the value of vRtrMplsLspPathAdaptive to 'true', enables
make-before-break functionality for the LSP path.
Setting the value to 'false', disables make-before-break
functionality for the path.
When the vRtrMplsLspPathAdaptive bit in vRtrMplsLspPathInheritance
is cleared (0), the value returned to a GET request is inherited
from vRtrMplsLspAdaptive.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.4.1.28 |
vRtrMplsLspPathOptimizeTimerThe value of vRtrMplsLspPathOptimizeTimer specifies the time, in
seconds, the software will wait before attempting to re-optimize
the LSP path.
When CSPF is enabled, changes in the network topology may cause
the existing path of a loose-hop LSP to become sub-optimal. Such
LSPs can be re-optimized and re-routed through more optimal paths
by recalculating the path for the LSP at periodic intervals. This
interval is controlled by the optimize timer.
A value of 0 indicates that optimization has been disabled.
When the vRtrMplsLspPathOptimizeTimer bit in
vRtrMplsLspPathInheritance is cleared (0), the value returned in
the GET request is inherited from vRtrMplsLspOptimizeTimer.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.4.1.29 |
vRtrMplsLspPathNextOptimizeThe value of vRtrMplsLspPathNextOptimize specifies the current value
of the optimize timer. This is the time, in seconds, remaining till
the optimize timer will expire and optimization will be started for
the LSP path.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.4.1.30 |
vRtrMplsLspPathOperBandwidthThe value of vRtrMplsLspPathOperBandwidth specifies the amount of
bandwidth in mega-bits per seconds (Mbps) that has been reserved
for the operational LSP path.
When make-before-break functionality for the LSP is enabled and
if the path bandwidth is changed, the resources allocated to the
existing LSP paths will not be released until a new path with
the new bandwidth settings has been established. While a new path
is being signaled, the administrative value and the operational
values of the path bandwidth may differ. The value of
vRtrMplsLspPathBandwidth specifies the bandwidth requirements for
the new LSP path trying to be established whereas the value of
vRtrMplsLspPathOperBandwidth specifies the bandwidth reserved
for the existing LSP path.ro Integer32 UNITS "mega-bits per second" .1.3.6.1.4.1.6527.3.1.2.6.4.1.31 |
vRtrMplsLspPathMBBStateThe value of vRtrMplsLspPathMBBState specifies the state of the
most recent invocation of the make-before-break functionality.
Possible states are:
none (1) - no make-before-break invoked
success (2) - make-before-break successful
inProgress (3) - make-before-break in progress
fail (4) - make-before-break failed.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.6.4.1.32 |
vRtrMplsLspPathResignalSetting the value of vRtrMplsLspPathResignal to 'doAction' triggers
the re-signaling of the LSP path.
If the LSP path is operationally down either due to network failure
or due to the retry attempts count being exceeded, setting this
variable to 'doAction' will initiate the signaling for the path. A
make-before-break signaling for the path will be initiated if the
LSP is operationally up but the make-before-break retry attempts
count was exceeded. Make-before-break signaling will also be
initiated for any LSP that is operationally up. This may be used
to cause a loose-hop LSP to be optimized.
If a re-signal is triggered while a re-signaling is already in
progress, the old transient state will be destroyed and a new
transaction being triggered.
An SNMP GET request on this object should return 'notApplicable'.rw TmnxActionType (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.6.4.1.33 |
vRtrMplsLspPathTunnelCRHopListIndexPrimary index into the vRtrMplsTunnelCHopTable identifying a
particular computed hop list. A value of 0 implies that there
is no computed hop list associated with this LSP path.ro Integer32 (0|1..2147483647) .1.3.6.1.4.1.6527.3.1.2.6.4.1.34 |
vRtrMplsLspPathOperMTUThe value of vRtrMplsLspPathOperMTU specifies the size
for the Maximum transmission unit (MTU) that is currently
operation for this LSP Path.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.4.1.35 |
vRtrMplsLspPathRecordLabelWhen the value of vRtrMplsLspPathRecordLabel is 'record',
recording of labels at each node that a LSP traverses is
enabled.
When the value of vRtrMplsLspPathRecordLabel is 'noRecord',
recording of labels at each node that a LSP traverses is
disabled.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.6.4.1.36 |
vRtrMplsLspPathStatTableThe vRtrMplsLspPathStatTable has an entry for an association
between a Labeled Switch Path (LSP) in the vRtrMplsLspTable
and a path (or tunnel) entry in the mplsTunnelTable. SEQUENCE OF VRtrMplsLspPathStatEntry .1.3.6.1.4.1.6527.3.1.2.6.5 |
vRtrMplsLspPathStatEntryEach row entry represents a collection of statistics for
an association between a Labeled Switch Path (LSP) in the
vRtrMplsLspTable and a path (or tunnel) entry in the
mplsTunnelTable.
Entries cannot be created and deleted via SNMP SET operations. VRtrMplsLspPathStatEntry .1.3.6.1.4.1.6527.3.1.2.6.5.1 |
vRtrMplsLspPathTimeUpThe total time in 10-millisecond units that this LSP path has
been operational. For example, the percentage up time can be
determined by computing (vRtrMplsLspPathTimeUp/vRtrMplsLspAge * 100 %).ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.5.1.1 |
vRtrMplsLspPathTimeDownThe total time in 10-millisecond units that this LSP Path has
not been operational.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.5.1.2 |
vRtrMplsLspPathRetryAttemptsThe number of unsuccessful attempts which have been made to
signal this path. As soon as the path gets signalled, this is
set to 0.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.5.1.3 |
vRtrMplsLspPathTransitionCountThe object vRtrMplsLspPathTransitionCount maintains the number
of transitions that have occurred for this LSP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.6.5.1.4 |
vRtrMplsLspPathCspfQueriesThe value of vRtrMplsLspPathCspfQueries specifies the number
of CSPF queries that have been made for this LSP path.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.6.5.1.5 |
vRtrMplsXCTableThis table has an entry for each mplsXCEntry
in the mplsXCTable. It serves as an another
indirect index to the mplsXCTable. SEQUENCE OF VRtrMplsXCEntry .1.3.6.1.4.1.6527.3.1.2.6.6 |
vRtrMplsXCEntryAn entry in this table represents the indices
to be used to search the mplsXCTable. VRtrMplsXCEntry .1.3.6.1.4.1.6527.3.1.2.6.6.1 |
vRtrMplsXCIndexAn index of the mplsXCTable. It represents
mplsXCIndex, a field of the mplsXCTable.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.6.6.1.1 |
vRtrMplsInSegmentIfIndexAn index of the mplsXCTable. It represents
mplsInSegmentIfIndex of the mplsInSegmentTable.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.6.6.1.2 |
vRtrMplsInSegmentLabelAn index of the mplsXCTable. It represents
mplsInSegmentLabel of the mplsInSegmentTable.ro MplsLabel (MPLS-LSR-MIB) .1.3.6.1.4.1.6527.3.1.2.6.6.1.3 |
vRtrMplsOutSegmentIndexAn index of the mplsXCTable. It represents
mplsOutSegmentIndex of the mplsOutSegmentTable.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.6.6.1.4 |
vRtrMplsERHopTunnelIndexPrimary index into the mplsTunnelHopTable identifying a particular
recorded hop list (stores ERO in LSR).ro Integer32 .1.3.6.1.4.1.6527.3.1.2.6.6.1.5 |
vRtrMplsARHopTunnelIndexPrimary index into the mplsTunnelARHopTable identifying a particular
recorded hop list (stores RRO in LSR).ro Integer32 .1.3.6.1.4.1.6527.3.1.2.6.6.1.6 |
vRtrMplsRsvpSessionIndexAn index into the vRtrRsvpSessionTable identifying a particular RSVP
session.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.6.1.7 |
vRtrMplsXCFailCodeThe value of vRtrMplsXCFailCode specifies the reason code for
cross-connect failure. A value of 0 indicates that no failure
occurred.ro TmnxMplsLspFailCode .1.3.6.1.4.1.6527.3.1.2.6.6.1.8 |
vRtrMplsXCCHopTableIndexIndex to the vRtrMplsTunnelCHopTable entries that specify
the hops for the CSPF path for a detour LSP for this tunnel.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.6.6.1.9 |
vRtrMplsGeneralTableThe vRtrMplsGeneralTable contains objects for general control and
management of an MPLS protocol instance within a virtual router. SEQUENCE OF VRtrMplsGeneralEntry .1.3.6.1.4.1.6527.3.1.2.6.7 |
vRtrMplsGeneralEntryEach row entry represents an instance of the MPLS protocol running
within a virtual router. Entries in this table cannot be
created and deleted via SNMP SET operations. An entry in this table
is created by the agent when vRtrMplsStatus in the vRtrConfTable is
set to 'create'. The entry is destroyed when vRtrMplsStatus is set
to 'delete' VRtrMplsGeneralEntry .1.3.6.1.4.1.6527.3.1.2.6.7.1 |
vRtrMplsGeneralLastChangeThe sysUpTime when this row was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.7.1.1 |
vRtrMplsGeneralAdminStateWhen vRtrMplsGeneralAdminState is set to 'inService', the agent
attempts to enable the MPLS protocol instance on this router.
When vRtrMplsGeneralAdminState is set to 'outOfService', the
agent attempts to disable the MPLS protocol instance on this
router.rw TmnxAdminState (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.6.7.1.2 |
vRtrMplsGeneralOperStatevRtrMplsGeneralOperState indicates the current operating state
of this MPLS protocol instance on this router.ro TmnxOperState (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.6.7.1.3 |
vRtrMplsGeneralPropagateTtlWhen vRtrMplsGeneralPropagateTtl is set to 'true', for all LSPs,
the ingress ESR writes the TTL of the IP packet in the label and
each transit ESR decrements the TTL in the label. At the egress
ESR the TTL value from the label is written into the IP packet.
When vRtrMplsGeneralPropagateTtl is set to 'false', the ingress
ESR ignores the IP packet TTl and writes the value of 255 into
the label, while the egress ESR does not write the label TTL
into the IP packet. This assumes that all ESRs have been
configured to have vRtrMplsGeneralPropagateTtl set to 'false',
or this may result in unpredictable behavior.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.7.1.4 |
vRtrMplsGeneralTEThe value of vRtrMplsGeneralTE specifies the type of traffic
engineering used with this MPLS instance.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.6.7.1.5 |
vRtrMplsGeneralNewLspIndexThis object is used to assign values to vRtrMplsLspIndex as
described in 'Textual Conventions for SNMPv2'. The network
manager reads the object, and then writes the value back
in the SET request that creates a new instance of
vRtrMplsLspEntry. If the SET fails with the code
'inconsistentValue', then the process must be repeated.
If the the SET succeeds, then the object is incremented
and the new instance is created according to the manager's
directions.rw TestAndIncr (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.7.1.6 |
vRtrMplsGeneralOptimizeTimerThe value of vRtrMplsGeneralOptimizeTimer specifies the time, in
seconds, the software will wait before attempting to re-optimize
the LSPs.
When CSPF is enabled, changes in the network topology may cause
the existing path of a loose-hop LSP to become sub-optimal. Such
LSPs can be re-optimized and re-routed through more optimal paths
by recalculating the path for the LSP at periodic intervals. This
interval is controlled by the optimize timer.
A value of 0 indicates that optimization has been disabled.
The value for vRtrMplsGeneralOptimizeTimer is by default inherited
by all LSPs and their paths.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.7.1.7 |
vRtrMplsGeneralFRObjectThe value of vRtrMplsGeneralFRObject specifies whether fast reroute,
for LSPs using 'Facility Backup', is signalled with or without the
fast reroute object. The value of vRtrMplsGeneralFRObject is ignored
if fast reroute is disabled for the LSP or if the LSP is using
'One-to-one Backup'.
The value for vRtrMplsGeneralFRObject is by default inherited by
all LSPs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.7.1.8 |
vRtrMplsGeneralResignalTimerThe value of vRtrMplsGeneralResignalTimer specifies the value
for the LSP resignal timer, that is the time, in minutes, the
software will wait before attempting to resignal the LSPs.
When the resignal timer expires, if the new recorded hop list
(RRO) for an LSP has a better metric than the current recorded
hop list, an attempt will be made to resignal that LSP using
the make-before-break mechanism. If the attempt to resignal
an LSP fails, the LSP will continue to use the existing path
and a resignal will be attempted the next time the timer expires.
A value of 0 for the resignal timer indicates that timer-based
LSP resignalling has been disabled.rw Unsigned32 (0|30..10080) UNITS "minutes" .1.3.6.1.4.1.6527.3.1.2.6.7.1.9 |
vRtrMplsGeneralHoldTimerThe value of vRtrMplsGeneralHoldTimer specifies the time, in
seconds, for which the ingress node holds a bit before
programming its data plane and declaring the lsp up to
the service module.
A value of 0 indicates that the hold timer has been disabled.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.7.1.10 |
vRtrMplsGeneralDynamicBypassThe value of vRtrMplsGeneralDynamicBypass specifies whether
dynamic bypass tunnels are enabled.
By default, dynamic bypass tunnels are enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.7.1.11 |
vRtrMplsGeneralNextResignalThe value of vRtrMplsGeneralNextResignal indicates the time
remaining, in minutes, for the vRtrMplsGeneralResignalTimer to expire.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.7.1.12 |
vRtrMplsGeneralOperDownReasonThe value of vRtrMplsGeneralOperDownReason indicates the reason
due to which the MPLS instance is operationally down.ro TmnxMplsOperDownReasonCode .1.3.6.1.4.1.6527.3.1.2.6.7.1.13 |
vRtrMplsGeneralSrlgFrrThe value of vRtrMplsGeneralSrlgFrr specifies whether Shared Risk
Link Group (SRLG) constraint will be used in the computation of
FRR bypass or detour to be associated with any primary LSP path
on the system. When the value of vRtrMplsGeneralSrlgFrr is
'true' the use of SRLG constraint is enabled.
By default, the use of SRLG constraint is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.7.1.14 |
vRtrMplsGeneralSrlgFrrStrictThe value of vRtrMplsGeneralSrlgFrrStrict specifies whether
to associate the LSP with a bypass or signal a detour if a
bypass or detour satisfies all other constraints except the SRLG
constraints. When the value of vRtrMplsGeneralSrlgFrrStrict is
'true' and a path that meets SRLG constraints is not found, the
bypass or detour is not setup. If this value is set to 'true'
when vRtrMplsGeneralSrlgFrr is set to 'false', vRtrMplsGeneralSrlgFrr
is set to 'true' also.
By default, the value of vRtrMplsGeneralSrlgFrrStrict is 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.7.1.15 |
vRtrMplsGeneralStatTableThe vRtrMplsGeneralStatTable contains statistics for an MPLS
protocol instance within a virtual router. SEQUENCE OF VRtrMplsGeneralStatEntry .1.3.6.1.4.1.6527.3.1.2.6.8 |
vRtrMplsGeneralStatEntryEach row entry represents a collection of statistics for an
instance of the MPLS protocol running within a virtual router.
Entries cannot be created and deleted via SNMP SET operations. VRtrMplsGeneralStatEntry .1.3.6.1.4.1.6527.3.1.2.6.8.1 |
vRtrMplsGeneralStaticLspOriginateThis object counts the number of static LSPs that originate
at this virtual router.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.6.8.1.1 |
vRtrMplsGeneralStaticLspTransitThis object counts the number of static LSPs that transit
through this virtual router.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.6.8.1.2 |
vRtrMplsGeneralStaticLspTerminateThis object counts the number of static LSPs that terminate
at this virtual router.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.6.8.1.3 |
vRtrMplsGeneralDynamicLspOriginateThis object counts the number of dynamic LSPs that originate
at this virtual router.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.6.8.1.4 |
vRtrMplsGeneralDynamicLspTransitThis object counts the number of dynamic LSPs that transit
through this virtual router.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.6.8.1.5 |
vRtrMplsGeneralDynamicLspTerminateThis object counts the number of dynamic LSPs that terminate
at this virtual router.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.6.8.1.6 |
vRtrMplsGeneralDetourLspOriginateThis object counts the number of detour LSPs that originate
at this virtual router.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.6.8.1.7 |
vRtrMplsGeneralDetourLspTransitThis object counts the number of detour LSPs that transit
through this virtual router.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.6.8.1.8 |
vRtrMplsGeneralDetourLspTerminateThis object counts the number of detour LSPs that terminate
at this virtual router.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.6.8.1.9 |
vRtrMplsIfTableThe vRtrMplsIfTable has an entry for each router interface
configured for MPLS in the system. SEQUENCE OF VRtrMplsIfEntry .1.3.6.1.4.1.6527.3.1.2.6.9 |
vRtrMplsIfEntryEach row entry represents an interface on this virtual router
that participates in the MPLS protocol. A row cannot be created
or deleted via SNMP SET requests. A row with default attribute
values is created by setting the vRtrIfEntry attribute,
vRtrIfMplsStatus, to 'create'. A row is removed if
vRtrIfMplsStatus is set to 'delete'. However, an attempt to
destroy a row will fail if vRtrMplsIfAdminState has
not first been set to 'outOfService'. VRtrMplsIfEntry .1.3.6.1.4.1.6527.3.1.2.6.9.1 |
vRtrMplsIfAdminStateThe desired administrative state for the MPLS protocol
running on this MPLS interface.rw TmnxAdminState (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.6.9.1.1 |
vRtrMplsIfOperStateThis variable indicates the current status of the MPLS protocol
running on this MPLS interface.ro TmnxOperState (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.6.9.1.2 |
vRtrMplsIfAdminGroupThe value of vRtrMplsIfAdminGroup is a bit-map that identifies the
admin groups to which the interface belongs. If bit 'n' is set,
then the interface belongs to the admin group with value 'n'.
By default, the interface does not belong to any admin groups.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.9.1.3 |
vRtrMplsIfTeMetricThe value of vRtrMplsIfTeMetric specifies the traffic engineering metric
for this interface. The TE metric is exchanged in addition to the IGP
metric by the IGPs. Depending on the value configured for
vRtrMplsLspCspfTeMetricEnabled, either the TE metric or the native
IGP metric is used in CSPF computations of the LSP paths. The maximum
value that can be configured is a 24 bit value.rw Unsigned32 (0|1..16777215) .1.3.6.1.4.1.6527.3.1.2.6.9.1.4 |
vRtrMplsIfStatTableThe vRtrMplsIfStatTable has an entry for each router interface
configured for MPLS in the system. SEQUENCE OF VRtrMplsIfStatEntry .1.3.6.1.4.1.6527.3.1.2.6.10 |
vRtrMplsIfStatEntryEach row entry represents a collection of statistics for an
interface on this virtual router that participates in the
MPLS protocol.
Entries cannot be created and deleted via SNMP SET operations. VRtrMplsIfStatEntry .1.3.6.1.4.1.6527.3.1.2.6.10.1 |
vRtrMplsIfTxPktCountThe total number of MPLS labeled packets transmitted from this
interface.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.6.10.1.1 |
vRtrMplsIfRxPktCountThe total number of MPLS labeled packets received on this
interface.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.6.10.1.2 |
vRtrMplsIfTxOctetCountThe total number of bytes in MPLS labeled packets transmitted
on this interface.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.6.10.1.3 |
vRtrMplsIfRxOctetCountThe total number of bytes in MPLS labeled packets received on
this interface.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.6.10.1.4 |
vRtrMplsTunnelARHopTableThe vRtrMplsTunnelARHopTable augments the mplsTunnelARHopEntry
in the MPLS-TE-MIB. SEQUENCE OF VRtrMplsTunnelARHopEntry .1.3.6.1.4.1.6527.3.1.2.6.11 |
vRtrMplsTunnelARHopEntryA row entry in this table corresponds to a row entry in the
mplsTunnelARHopTable and adds to the information contained in
that table VRtrMplsTunnelARHopEntry .1.3.6.1.4.1.6527.3.1.2.6.11.1 |
vRtrMplsTunnelARHopProtectionIf the 'localAvailable' bit is set, it indicates that the link
downstream of this node has been protected by means of a local
repair mechanism. This mechanism can be either the one-to-one
backup method or the facility backup method.
If the 'localInUse' bit is set, then it indicates that the local
protection mechanism is being used to maintain this tunnel.
If the 'bandwidthProtected' bit is set, then it indicates that
the backup path is guaranteed to provide the desired bandwidth.
If the 'nodeProtected' bit is set, then it indicates that the
backup path provides protection against the failure of the next
LSR along the LSP.ro Bits .1.3.6.1.4.1.6527.3.1.2.6.11.1.1 |
vRtrMplsTunnelARHopRecordLabelIf label recording is enabled, vRtrMplsTunnelARHopRecordLabel
specifies the label that is advertised to the previous hop in
the hop list. If label recording is disabled,
vRtrMplsTunnelARHopRecordLabel will have a value of 4294967295ro MplsLabel (MPLS-LSR-MIB) .1.3.6.1.4.1.6527.3.1.2.6.11.1.2 |
vRtrMplsTunnelARHopRouterIdvRtrMplsTunnelARHopRouterId specifies the router ID of the node
corresponding to this hop.ro IpAddress .1.3.6.1.4.1.6527.3.1.2.6.11.1.3 |
vRtrMplsTunnelCHopTableThe vRtrMplsTunnelCHopTable is used to hold the CSPF
path for a detour LSP. Each entry indicates a single
hop.
Primary index is the vRtrMplsTunnelCHopListIndex which associates
multiple entries (hops) in the vRtrMplsTunnelCHopTable to a single
mplsTunnelEntry specified in the mplsTunnelTable.
The first row in the table is the first hop after the
origination point of the tunnel. SEQUENCE OF VRtrMplsTunnelCHopEntry .1.3.6.1.4.1.6527.3.1.2.6.12 |
vRtrMplsTunnelCHopEntryAn entry in this table represents a CSPF tunnel hop.
Entries are created and deleted by the system. VRtrMplsTunnelCHopEntry .1.3.6.1.4.1.6527.3.1.2.6.12.1 |
vRtrMplsTunnelCHopListIndexPrimary index into this table identifying a particular explicit route
object. Integer32 .1.3.6.1.4.1.6527.3.1.2.6.12.1.1 |
vRtrMplsTunnelCHopIndexSecondary index into this table identifying a particular hop. Integer32 .1.3.6.1.4.1.6527.3.1.2.6.12.1.2 |
vRtrMplsTunnelCHopAddrTypeDenotes the address type of this tunnel hop.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.6.12.1.3 |
vRtrMplsTunnelCHopIpv4AddrIf vRtrMplsTunnelCHopAddrType is set to ipV4(1), then this value will
contain the IPv4 address of this hop. This object is otherwise
insignificant and should contain a value of 0.ro IpAddress .1.3.6.1.4.1.6527.3.1.2.6.12.1.4 |
vRtrMplsTunnelCHopIpv4PrefixLenIf vRtrMplsTunnelCHopAddrType is ipV4(1), then the prefix length for
this hop's IPv4 address is contained herein. This object is otherwise
insignificant and should contain a value of 0.ro INTEGER .1.3.6.1.4.1.6527.3.1.2.6.12.1.5 |
vRtrMplsTunnelCHopIpv6AddrIf the vRtrMplsTunnelCHopAddrType is set to ipV6(2), then this
variable contains the IPv6 address of this hop. This object is
otherwise insignificant and should contain a value of 0.ro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.6.12.1.6 |
vRtrMplsTunnelCHopIpv6PrefixLenIf vRtrMplsTunnelCHopAddrType is set to ipV6(2), this value will
contain the prefix length for this hop's IPv6 address. This object is
otherwise insignificant and should contain a value of 0.ro INTEGER .1.3.6.1.4.1.6527.3.1.2.6.12.1.7 |
vRtrMplsTunnelCHopAsNumberIf vRtrMplsTunnelCHopAddrType is set to asNumber(3), then this value
will contain the AS number of this hop. This object is otherwise
insignificant and should contain a value of 0 to indicate this fact.ro INTEGER .1.3.6.1.4.1.6527.3.1.2.6.12.1.8 |
vRtrMplsTunnelCHopLspIdIf vRtrMplsTunnelCHopAddrType is set to lspid(4), then this value will
contain the LSPID of a tunnel of this hop. The present tunnel being
configured is tunneled through this hop (using label stacking). This
object is otherwise insignificant and should contain a value of 0 to
indicate this fact.ro MplsLSPID (MPLS-LSR-MIB) .1.3.6.1.4.1.6527.3.1.2.6.12.1.9 |
vRtrMplsTunnelCHopStrictOrLooseDenotes whether this tunnel hop is routed in a strict or loose
fashion.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.6.12.1.10 |
vRtrMplsAdminGroupTableThe vRtrMplsAdminGroupTable has an entry for each administrative
group configured for the virtual router in the system.
Administrative groups are resource constructs that define a link
color or resource class. They provide the ability to classify
network resources (links) into groups or colors based on zones,
geographic location, link location, etc. By doing so, network
administrators are able to do more granular traffic engineering
of LSPs. SEQUENCE OF VRtrMplsAdminGroupEntry .1.3.6.1.4.1.6527.3.1.2.6.13 |
vRtrMplsAdminGroupEntryEach row entry in the vRtrMplsAdminGroupTable represents an
administrative group which is simply a mapping between a group
name (an ASCII string) and a group value (a number in the range
0 to 31).
Entries in this table are created and deleted via SNMP SET
operations. An entry is created by setting the value of
vRtrMplsAdminGroupRowStatus to 'createAndWait'. The row status
for this entry can be set to active only once the value of
vRtrMplsAdminGroupValue has been set to a valid number in the
range 0 to 31. The entry is destroyed when
vRtrMplsAdminGroupRowStatus is set to 'destroy'. VRtrMplsAdminGroupEntry .1.3.6.1.4.1.6527.3.1.2.6.13.1 |
vRtrMplsAdminGroupNameThe value of vRtrMplsAdminGroupName uniquely identifies the
name of the administrative group within a virtual router
instance. TNamedItem (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.6.13.1.1 |
vRtrMplsAdminGroupRowStatusvRtrMplsAdminGroupRowStatus is used to create, delete or
control entries in the vRtrMplsAdminGroupTable. To create
a row entry, the row status should be set to 'createAndWait'.
Before the row can be placed into the 'active' state,
vRtrMplsAdminGroupValue must be set to a value between 0
and 31. To delete a row entry, the row status should be set
to 'destroy'rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.13.1.2 |
vRtrMplsAdminGroupValueThe value of vRtrMplsAdminGroupValue specifies the group value
associated with this administrative group. This value is unique
within a virtual router instance.
A value of -1 indicates that the group value for this entry has
not been set.rw Integer32 (-1|0..31) .1.3.6.1.4.1.6527.3.1.2.6.13.1.3 |
vRtrMplsFSGroupTableThe vRtrMplsFSGroupTable has an entry for each group that is
a part of the fate sharing database configured for the virtual
router in the system.
A fate sharing group is used to define a group of links and
nodes in the network that share common risk attributes. To
minimize a single point of failure, backup paths can be created
that not only avoid the nodes and links of the primary path but
also any other nodes and links that share risk with the nodes
and links of the primary path. SEQUENCE OF VRtrMplsFSGroupEntry .1.3.6.1.4.1.6527.3.1.2.6.14 |
vRtrMplsFSGroupEntryEach row entry in the vRtrMplsFSGroupTable represents a
fate sharing group which is a database of nodes and links
that share common risk attributes.
Entries in this table are created and deleted via SNMP SET
operations. An entry is created by setting the value of
vRtrMplsFSGroupRowStatus to 'createAndGo'. An entry can
be deleted by setting vRtrMplsFSGroupRowStatus to 'destroy'. VRtrMplsFSGroupEntry .1.3.6.1.4.1.6527.3.1.2.6.14.1 |
vRtrMplsFSGroupNameThe value of vRtrMplsFSGroupName uniquely identifies the
name of the fate sharing group within a virtual router
instance. TNamedItem (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.6.14.1.1 |
vRtrMplsFSGroupRowStatusvRtrMplsFSGroupRowStatus is used to create, delete or
control entries in the vRtrMplsFSGroupTable. To create
a row entry, the row status should be set to 'createAndGo'.
To delete a row entry, the row status should be set to
'destroy'rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.14.1.2 |
vRtrMplsFSGroupCostThe value of vRtrMplsFSGroupCost specifies the cost assigned
to the fate sharing group. This cost is applied to all nodes
and links that are part of this group and used for CSPF
calculations. The higher the cost of the node or link, the
lesser its chance of being selected as part of the path.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.14.1.3 |
vRtrMplsFSGroupParamsTableThe vRtrMplsFSGroupParamsTable has an entry for each node
or link that is part of a fate sharing group on this virtual
router. SEQUENCE OF VRtrMplsFSGroupParamsEntry .1.3.6.1.4.1.6527.3.1.2.6.15 |
vRtrMplsFSGroupParamsEntryEach row entry in the vRtrMplsFSGroupParamsTable represents
either a node or a link that is a part of a fate sharing group
defined in the vRtrMplsFSGroupTable.
Entries in this table are created and deleted via SNMP SET
operations. An entry is created by setting the value of
vRtrMplsFSGroupParamsRowStatus to 'createAndGo'. An entry
can be deleted by setting vRtrMplsFSGroupParamsRowStatus to
'destroy'.
To configure a node to be part of the group, create an entry
in this table with vRtrMplsFSGroupParamsFromAddr set to a
valid non-zero IP address and vRtrMplsFSGroupParamsToAddr set
to 0. To configure a link to be part of the group, create an
entry in this table with both vRtrMplsFSGroupParamsFromAddr
and vRtrMplsFSGroupParamsToAddr set to valid non-zero IP
addresses. VRtrMplsFSGroupParamsEntry .1.3.6.1.4.1.6527.3.1.2.6.15.1 |
vRtrMplsFSGroupParamsFromAddrThe value of vRtrMplsFSGroupParamsFromAddr along with the
value of vRtrMplsFSGroupParamsToAddr uniquely identifies a
link or node within a fate sharing group.
This value must be non-zero for all row entries whether it
represents a node or a link. IpAddress .1.3.6.1.4.1.6527.3.1.2.6.15.1.1 |
vRtrMplsFSGroupParamsToAddrThe value of vRtrMplsFSGroupParamsToAddr along with the
value of vRtrMplsFSGroupParamsFromAddr uniquely identifies
a link or node within a fate sharing group.
This value must be 0 for row entries that represent a node
and must be non-zero for row entries that represent a link. IpAddress .1.3.6.1.4.1.6527.3.1.2.6.15.1.2 |
vRtrMplsFSGroupParamsRowStatusvRtrMplsFSGroupParamsRowStatus is used to create, delete or
control entries in the vRtrMplsFSGroupParamsTable. To create
a row entry, the row status should be set to 'createAndGo'.
To delete a row entry, the row status should be set to
'destroy'rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.15.1.3 |
tmnxMplsNotificationlObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.6.16 |
vRtrMplsLspNotificationReasonCodeUsed by vRtrMplsLspDown, the value indicates the reason for the
LSP going down.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.6.16.1 |
vRtrMplsLspPathNotificationReasonCodeUsed by vRtrMplsLspPathDown, the value indicates the reason for the
LSP path going down.ro TmnxMplsLspFailCode .1.3.6.1.4.1.6527.3.1.2.6.16.2 |
vRtrMplsNotifyRowused by Alcatel 7x50 SR series MPLS Configuration change
Notifications, the object ID indicates the MPLS table and entry.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.16.3 |
vRtrMplsLabelRangeTableThe vRtrMplsLabelRangeTable has an entry for each type of
label, the minimum and maximum value in the label range and
information on total available and aging labels in each range.
This is a read-only table. SEQUENCE OF VRtrMplsLabelRangeEntry .1.3.6.1.4.1.6527.3.1.2.6.17 |
vRtrMplsLabelRangeEntryEach row entry in the vRtrMplsLabelRangeTable represents
a type of label. Each entry contains the label range used
by that label type and the number of aging and allocated
labels in the range. VRtrMplsLabelRangeEntry .1.3.6.1.4.1.6527.3.1.2.6.17.1 |
vRtrMplsLabelTypeThe value of vRtrMplsLabelType specifies the type of
label and is the index for this table. Enumeration .1.3.6.1.4.1.6527.3.1.2.6.17.1.1 |
vRtrMplsLabelRangeMinThe value of vRtrMplsLabelRangeMin specifies the minimum
label value in the range for a particular label type.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.17.1.2 |
vRtrMplsLabelRangeMaxThe value of vRtrMplsLabelRangeMax specifies the maximum
label value in the range for a particular label type.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.17.1.3 |
vRtrMplsLabelRangeAgingThe value of vRtrMplsLabelRangeAging represents the
number of labels that are currently allocated and aging.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.17.1.4 |
vRtrMplsLabelRangeAvailableThe value of vRtrMplsLabelRangeAvailable represents the
number of labels that are currently available for each
label type.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.17.1.5 |
vRtrMplsStaticLSPLabelTableThe vRtrMplsStaticLSPLabelTable has an entry for each allocated
label that is part of the static LSP label range. This is a
read-only table. SEQUENCE OF VRtrMplsStaticLSPLabelEntry .1.3.6.1.4.1.6527.3.1.2.6.18 |
vRtrMplsStaticLSPLabelEntryEach row entry in the vRtrMplsStaticLSPLabelTable represents
a label of type static LSP that is currently allocated.
The entry includes information about the current owner
for that label. VRtrMplsStaticLSPLabelEntry .1.3.6.1.4.1.6527.3.1.2.6.18.1 |
vRtrMplsStaticLSPLabelThe value of vRtrMplsStaticLSPLabel specifies the label
value. MplsLabel .1.3.6.1.4.1.6527.3.1.2.6.18.1.1 |
vRtrMplsStaticLSPLabelOwnerThe value of vRtrMplsStaticLSPLabelOwner specifies the owner
for the label value vRtrMplsStaticLSPLabel.ro TmnxMplsLabelOwner .1.3.6.1.4.1.6527.3.1.2.6.18.1.2 |
vRtrMplsStaticSvcLabelTableThe vRtrMplsStaticSvcLabelTable has an entry for each allocated
label that is part of the static service label range. This
is a read-only table. SEQUENCE OF VRtrMplsStaticSvcLabelEntry .1.3.6.1.4.1.6527.3.1.2.6.19 |
vRtrMplsStaticSvcLabelEntryEach row entry in the vRtrMplsStaticSvcLabelTable represents
a label of type static-svc that is currently allocated.
The entry includes information about the current owner
for that label. VRtrMplsStaticSvcLabelEntry .1.3.6.1.4.1.6527.3.1.2.6.19.1 |
vRtrMplsStaticSvcLabelThe value of vRtrMplsStaticSvcLabel specifies the label
value. MplsLabel .1.3.6.1.4.1.6527.3.1.2.6.19.1.1 |
vRtrMplsStaticSvcLabelOwnerThe value of vRtrMplsStaticSvcLabelOwner specifies
the owner for the label value vRtrMplsStaticSvcLabel.ro TmnxMplsLabelOwner .1.3.6.1.4.1.6527.3.1.2.6.19.1.2 |
vRtrMplsSrlgGrpTableLastChangedThe value of vRtrMplsSrlgGrpTableLastChanged indicates the
sysUpTime at the time of the last modification to
vRtrMplsSrlgGrpTable by adding, deleting an entry or change
to a writable object in the table.
If no changes were made to the table since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.20 |
vRtrMplsSrlgGrpTableThe vRtrMplsSrlgGrpTable has an entry for each Shared Risk Link
Groups (SRLG) group configured for MPLS in the system. SEQUENCE OF VRtrMplsSrlgGrpEntry .1.3.6.1.4.1.6527.3.1.2.6.21 |
vRtrMplsSrlgGrpEntryEach row entry represents a SRLG group on this virtual router
that participates in the MPLS protocol. A row can be created
or deleted via SNMP SET requests. VRtrMplsSrlgGrpEntry .1.3.6.1.4.1.6527.3.1.2.6.21.1 |
vRtrMplsSrlgGrpNameThe value of vRtrMplsSrlgGrpName indicates the SRLG group name. TNamedItem (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.6.21.1.1 |
vRtrMplsSrlgGrpRowStatusvRtrMplsSrlgGrpRowStatus is used to create, delete or
control entries in the vRtrMplsSrlgGrpTable. A value must
also be set for vRtrMplsSrlgGrpValue before the row entry can
transition to the 'active' state.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.21.1.2 |
vRtrMplsSrlgGrpLastChangedThe value of vRtrMplsSrlgGrpLastChanged indicates the timestamp of
last change to this row in vRtrMplsSrlgGrpTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.21.1.3 |
vRtrMplsSrlgGrpValueThe value of vRtrMplsSrlgGrpValue specifies the group value
associated with vRtrMplsSrlgGrpName. This value is unique
within a virtual router instance.
At the time of row creation, a value for vRtrMplsSrlgGrpValue
must be specified or else row creation would fail.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.6.21.1.4 |
vRtrMplsIfSrlgGrpTblLastChangedThe value of vRtrMplsIfSrlgGrpTblLastChanged indicates the
sysUpTime at the time of the last modification to
vRtrMplsIfSrlgGrpTable by adding, deleting an entry or change
to a writable object in the table.
If no changes were made to the table since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.22 |
vRtrMplsIfSrlgGrpTableThe vRtrMplsIfSrlgGrpTable has an entry for each Shared Risk
Link Group (SRLG) groups associated with a router interface
configured for MPLS in the system. SEQUENCE OF VRtrMplsIfSrlgGrpEntry .1.3.6.1.4.1.6527.3.1.2.6.23 |
vRtrMplsIfSrlgGrpEntryEach row entry represents an SRLG group associated with a interface
on this virtual router that participates in the MPLS protocol.
A row can be created or deleted via SNMP SET requests. VRtrMplsIfSrlgGrpEntry .1.3.6.1.4.1.6527.3.1.2.6.23.1 |
vRtrMplsIfSrlgGrpNameThe value of vRtrMplsIfSrlgGrpName indicates the SRLG group name. TNamedItem (ALCATEL-IND1-TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.6.23.1.1 |
vRtrMplsIfSrlgGrpRowStatusvRtrMplsIfSrlgGrpRowStatus is used to create, delete or
control entries in the vRtrMplsIfSrlgGrpTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.23.1.2 |
vRtrMplsIfSrlgGrpLastChangedThe value of vRtrMplsIfSrlgGrpLastChanged indicates the timestamp
of last change to this row in vRtrMplsIfSrlgGrpTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.6.23.1.3 |
tmnxMplsNotifyPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.6 |
tmnxMplsNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.6.0 |
vRtrMplsStateChangeThis Notification is generated when the MPLS
module changes state NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.6.0.1 |
vRtrMplsIfStateChangeThis Notification is generated when the MPLS
interface changes state NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.6.0.2 |
vRtrMplsLspUpThis Notification is generated when a LSP transitions
to the 'inService' state from any other state. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.6.0.3 |
vRtrMplsLspDownThis Notification is generated when a LSP transitions
out of 'inService' state to any other state. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.6.0.4 |
vRtrMplsLspPathUpThis Notification is generated when a LSP Path transitions
to the 'inService' state from any other state. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.6.0.5 |
vRtrMplsLspPathDownThis Notification is generated when a LSP Path transitions
out of 'inService' state to any other state. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.6.0.6 |
vRtrMplsLspPathReroutedThe vRtrMplsLspPathRerouted notification is generated when
an LSP Path is rerouted. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.6.0.7 |
vRtrMplsLspPathResignaledThe vRtrMplsLspPathResignaled notification is generated when
an LSP Path is resignaled. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.6.0.8 |