ALCATEL-IND1-SYSTEM-MIB
AI MIB Summary
The ALCATEL-IND1-SYSTEM-MIB provides enterprise-specific SNMP access to monitor and manage the proprietary system subsystems of the Alcatel-Lucent "Birds Of Prey" product line, exposing critical device health metrics such as CPU utilization, memory usage, and system status. This module enables network administrators to retrieve standardized system-level data for fault detection and performance analysis on Alcatel-Lucent hardware.
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line Proprietary System Subsystem.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1SystemMIB.1.3.6.1.4.1.6486.801.1.1.1.2.1
174
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
174 total| Object Name |
|---|
alcatelIND1SystemMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Proprietary System Subsystem.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.1.1.2.1 |
alcatelIND1SystemMIBObjectsBranch For BOP Proprietary System
Subsystem Managed Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.1.1.2.1.1 |
systemMicrocode OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1 |
systemMicrocodePackageTablethe microcode package table SEQUENCE OF SystemMicrocodePackageEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1 |
systemMicrocodePackageEntrya row in the microcode package table SystemMicrocodePackageEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1 |
systemMicrocodePackageDirectoryIndexThe package index for directories. Values 1-4 are pre-defined
as: loaded(1), certified(2), working(3), issu(4). Values 5+
are user working directories in /flash assigned by the system.
Values 5+ remain associated with a directory until reboot,
takeover, the directory no longer contains valid images or
the directory no longer exists. Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.1 |
systemMicrocodePackageDirectoryThe directory name under flash where the microcode package is found.
Directories with names longer than 108 characters will be skipped. SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.2 |
systemMicrocodePackageIndexThe index to the package sub table in the microcode table Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.3 |
systemMicrocodePackageVersionThe version of the microcode package (Fos.img, Fbase.img, etc.)ro SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.4 |
systemMicrocodePackageNameThe name of the microcode packagero SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.5 |
systemMicrocodePackageDescriptionThe description of the microcode packagero SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.6 |
systemMicrocodePackageStatusThe status of the microcode packagero Enumeration .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.7 |
systemMicrocodePackageSizeThe size of the microcode packagero Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.8 |
systemBootParams OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.2 |
systemBootNetworkthis object is the base IP address of the EMP for this CMMro IpAddress .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.2.1 |
systemBootNetworkGatewaythis object is the gateway of the EMP for this CMMro IpAddress .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.2.2 |
systemBootNetworkNetmaskThis is the Netmask of the EMP that is used when this
CMM boots.ro IpAddress .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.2.3 |
systemHardware OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3 |
systemHardwareFlashMfgThis object identifies the manufacturer of the Flash memory
used on this product. toshiba(7) is for hawk only. The reason 7 is used
is because 5 is already used for micron and 6 is for kingston.
toshiba, sandisk, and sst are compact flashes for the hawk only.ro Enumeration .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.1 |
systemHardwareFlashSizeThis object identifies the size of the flash memory available
on this CMM. It is the total flash hardware memory and does
not indicate how much of the memory is free, used, etc.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.2 |
systemHardwareMemoryMfgThis object identifies the manufacturer of the RAM memory
used on this CMM.ro Enumeration .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.3 |
systemHardwareMemorySizeThis object identifies the size of the RAM memory available on
this CMM. It is the total RAM hardware memory and does not
indicate how much of the memory is free, used, etc.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.4 |
systemHardwareNVRAMBatteryLowThis object identifies the whether the NVRAM battery is low.
true(1), false(2)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.5 |
systemHardwareBootCpuTypeIndicates the manufacturer and model number of the CPU. Currently,
only two types of processors are enumerated.ro Enumeration .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.6 |
systemHardwareJumperInterruptBootThis object identifies whether the Interrupt Boot Jumper on this
CMM is set: True(1), False(2)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.7 |
systemHardwareJumperForceUartDefaultsThis object identifies whether the Force Uart Defaults Jumper on this
CMM is set: True(1), False(2)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.8 |
systemHardwareJumperRunExtendedMemoryDiagnosticsThis object identifies whether the Run Extended Memory
Diagnostics Jumper on this CMM is set: True(1), False(2)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.9 |
systemHardwareJumperSpareThis object identifies whether the Spare Jumper on this
CMM is set: True(1), False(2)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.10 |
systemHardwareFpgaVersionTableThis table contains the FPGA version for each FPGA on this CMM SEQUENCE OF SystemHardwareFpgaVersionEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.11 |
systemHardwareFpgaVersionEntrya row in the systemHardwareFpgaVersionTable SystemHardwareFpgaVersionEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.11.1 |
systemHardwareFpgaVersionIndexThis is the index to one of the FPGA versions on this CMMro Integer32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.11.1.1 |
systemHardwareFpgaVersionThis is the major version of one of the FPGA devices on this CMM.
refer to the systemHardwareMinorFpgaVersion for the minor number.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.11.1.2 |
systemHardwareBootRomVersionA string that identifies the boot rom versionro SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.12 |
systemHardwareBackupMiniBootVersionA string that identifies the backup miniboot version.ro SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.13 |
systemHardwareDefaultMiniBootVersionA string that identifies the default miniboot version.ro SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.14 |
systemHardwareMinorFpgaVersionA string that identifies the minor FPGA version. Refer to the
systemHardwareFpgaVersion for the major FPGA version number.ro SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.15 |
systemHardwareCpldVersionA string that identifies the CPLD version.ro SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.16 |
systemHardwareUbootVersionA string that identifies the Uboot version.ro SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.17 |
systemHardwareProdRegIdA string that identifies the product ID registerro SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.18 |
systemHardwareRevisionRegisterA string that identifies the hardware revision registerro SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.19 |
systemHardwareXfpIdA string that identifies the XFP IDro SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.20 |
systemHardwareUbootMinibootVersionA string that identifies the Uboot-miniboot version.ro SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.21 |
systemFileSystem OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4 |
systemFileSystemTablesystem file system table for this CMM. SEQUENCE OF SystemFileSystemEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1 |
systemFileSystemEntryA row in the system file system table SystemFileSystemEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1.1 |
systemFileSystemIndexIndex to a specific file system.ro FileSystemIndex .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1.1.1 |
systemFileSystemNameThe name of the file system.ro SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1.1.2 |
systemFileSystemFreeSpacethe free space in octets of this file systemro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1.1.3 |
systemFileSystemDirectoryNameThe name of a file system directory. This object is used in conjunction
with an Action command. The Action command will set this directory
name to the name of a specific directory. Information for all of the
files in that directory will then be read from the file system and
the appropriate values written in the entries in the systemFileSystemFile
table. All this is being done to give snmp access to the file system
files.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.2 |
systemFileSystemDirectoryDateTimethe date and time (in system format) of the last access to this directoryro SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.3 |
systemFileSystemFileTablesystem file system File table for this CMM. This table is used by
an Action command which will populate it with file information read
from the files in the specified directory. SEQUENCE OF SystemFileSystemFileEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4 |
systemFileSystemFileEntryA row in the system file system File table SystemFileSystemFileEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1 |
systemFileSystemFileIndexIndex to a specific file system File.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.1 |
systemFileSystemFileNameThe name of a file system Filero SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.2 |
systemFileSystemFileTypeThe Type of a file system Filero SystemFileType .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.3 |
systemFileSystemFileSizesize of this filero Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.4 |
systemFileSystemFileAttrattributes of this filero Enumeration .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.5 |
systemFileSystemFileDateTimethe modification date and time of a filero SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.6 |
systemServices OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5 |
systemServicesDateThis object contains the current System Date in the
following format: MM/DD/YYYYrw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.1 |
systemServicesTimeThis object contains the current System Time in the
following format: HH:MM:SSrw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.2 |
systemServicesTimezoneThis object contains the current Hour Offset from UTC
in the following format: -13:00 to +12:00
OR
a well known timezone (PST,CST,etc.)rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.3 |
systemServicesTimezoneStartWeekfirst, second, third, fourth, fifth, last = 1,2,3,4,5,6rw Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.4 |
systemServicesTimezoneStartDaySunday, Monday, Tues... = 1,2,3,4,5,6,7rw Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.5 |
systemServicesTimezoneStartMonthJanuary, February, march... = 1,2,3,4,5,67,8,9,10,11,12rw Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.6 |
systemServicesTimezoneStartTime2:00, 3:00, 4:00... = 200, 300, 400, etc.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.7 |
systemServicesTimezoneOffset60 minutes = 60rw Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.8 |
systemServicesTimezoneEndWeekfirst, second, third, fourth, fifth, last = 1,2,3,4,5,6rw Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.9 |
systemServicesTimezoneEndDaySunday, Monday, Tues... = 1,2,3,4,5,6,7rw Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.10 |
systemServicesTimezoneEndMonthJanuary, February, march... = 1,2,3,4,5,6,7,8,9,10,11,12rw Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.11 |
systemServicesTimezoneEndTime2:00, 3:00, 4:00... = 200, 300, 400, etc.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.12 |
systemServicesEnableDSTThis object enables and disables the DST.rw Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.13 |
systemServicesWorkingDirectoryThis object contains the current file system working directory
for this CMM. For example, /flash/certifiedrw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.14 |
systemServicesArg1the 1st argument for system services action routinesrw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.15 |
systemServicesArg2the 2nd argument for system services action routinesrw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.16 |
systemServicesArg3the 3rd argument for system services action routinesrw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.17 |
systemServicesArg4the 4th argument for system services action routinesrw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.18 |
systemServicesArg5the 5th argument for system services action routinesrw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.19 |
systemServicesArg6the 6th argument for system services action routinesrw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.20 |
systemServicesArg7the 7th argument for system services action routinesrw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.21 |
systemServicesArg8the 8th argument for system services action routinesrw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.22 |
systemServicesArg9the 9th argument for system services action routinesrw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.23 |
systemServicesActionThis object identifies which of the above Actions is to be
performed by the System Services Application. Most Actions
require one or more parameters be set before the Action is
executed. systemServicesAction - 26 for bootrom, 27 for default miniboot,
and 28 for backup miniboot use systemServicesArg1 for name of the file
scp- the first 2 arguments are going to be used. Set arg 1 with the source
and the arg 2 with the destination file(s).
E.g. scp LocalDir/testfileX.txt admin@10.255.11.1:RemoteDir/testfileX.txt
For mount and umount, systemServicesArg1 specifies the
mount point (such as /uflash).
For newfs, systemServicesArg1 contains the name of the
file-system (/uflash or /flash) which will be created. On
/uflash, a FAT16 file system is created with long name naming conventions.
For fsck, systemServicesArg1 contains the name of the
file-system (/uflash or /flash) which will be checked and
systemServicesArg2 will contain the string repair or
no-repair depending on if autocorrection is requested.
To see all file systems currently mounted, refer to the
systemFileSystemTable.
For backup and restore, systemServicesArg1 contains the
archive name and systemServicesArg2 through Arg9 contains the
directories and/or files to be archived/extracted.
For newfs, fsck, backup and restore, the
systemServicesActionPercentComplete variable can be
inspected to see a progress indication.rw Enumeration .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.24 |
systemServicesResultCodethe result of a system services applicationro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.25 |
systemServicesResultStringthe string result of a system services applicationro SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.26 |
systemServicesKtraceEnableenables/disables the Ktrace facilityrwobsolete Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.27 |
systemServicesSystraceEnableenables/disables the Systrace facilityrwobsolete Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.28 |
systemServicesTtyLinesthe number of tty lines for a console screenro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.29 |
systemServicesTtyColumnsthe number of tty columns for a console screenro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.30 |
systemServicesMemMonitorEnabledisables/enables the kernel Memory Monitor featurerw Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.31 |
systemServicesKtraceLevelTablethe table of Ktrace severity level settingsobsolete SEQUENCE OF SystemServicesKtraceLevelEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.32 |
systemServicesKtraceLevelEntryA row in the system services ktrace level table. There
is one entry for each possible Application IDobsolete SystemServicesKtraceLevelEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.32.1 |
systemServicesKtraceLevelAppIdthe index into the ktrace level tableroobsolete AppIdIndex .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.32.1.1 |
systemServicesKtraceLevelthe ktrace level for a specific Application IDrwobsolete SeverityLevel .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.32.1.2 |
systemServicesSystraceLevelTablethe table of Systrace severity level settingsobsolete SEQUENCE OF SystemServicesSystraceLevelEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.33 |
systemServicesSystraceLevelEntryA row in the system services systrace level table. There
is one entry for each possible Application IDobsolete SystemServicesSystraceLevelEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.33.1 |
systemServicesSystraceLevelAppIdthe Systrace level for a specific Application ID.roobsolete AppIdIndex .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.33.1.1 |
systemServicesSystraceLevelthe Systrace level for a specific Application ID.rwobsolete SeverityLevel .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.33.1.2 |
systemUpdateStatusTableProvides update status for firmware updates SEQUENCE OF SystemUpdateStatusEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34 |
systemUpdateStatusEntryA row in the update status table. SystemUpdateStatusEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34.1 |
systemUpdateIndexThe index to the CMM for which status is required. Integer32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34.1.1 |
systemUpdateStatusStatus of a firmware update. In the case of doneNok,
further information can be obtained from systemUpdateErrorCode.ro Enumeration .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34.1.2 |
systemUpdateErrorCodeError codes for done_nok.ro Enumeration .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34.1.3 |
systemServicesActionPercentCompleteThis object identifies the percent completion of the currently
executing systemServicesAction.ro CommandPercentComplete .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.35 |
systemServicesCurrentArchivePathNameThis object identifies the archive currently being read
via the systemServicesArchiveTable. This object is the complete
pathname to the archive and must be set prior to reading the
systemServicesArchiveTable.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.36 |
systemServicesArchiveTableThis table contains the contents of a backup archive.
This table is used by the restore action command to
display (rather than backup) an archive. The restore
command will populate this table with archive
information read from the archive specified by the
systemServicesAction restore command. This is done as
follows. Set the systemServicesArg1 object to the
archive name to be read. Set the systemServicesArg2
object to the string: display-only. Set the
systemServicesAction object to restore. Then
read this table. SEQUENCE OF SystemServicesArchiveEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37 |
systemServicesArchiveEntryA row in the system services archive table. SystemServicesArchiveEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1 |
systemServicesArchiveIndexIndex to a specific entry in the backup archive file.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.1 |
systemServicesArchiveNameThe name of a file in the backup archive file.ro SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.2 |
systemServicesArchiveTypeThe type of a file in the backup archive file.ro SystemFileType .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.3 |
systemServicesArchiveSizeThe size of a file in the backup archive file.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.4 |
systemServicesArchiveAttrThe attributes of a file in the backup archive file.ro Enumeration .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.5 |
systemServicesUsbEnabledisable/enable the USB interfacerw Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.38 |
systemServicesUsbAutoCopyEnabledisable/enable the USB auto-copy facilityrw Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.39 |
systemServicesUsbMounteddeterminse if usb is mountedro Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.40 |
systemSwitchLogging OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6 |
systemSwitchLoggingIndexA small positive integer used to identify a switch logging
outputro SwitchLoggingIndex .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.1 |
systemSwitchLoggingEnableGlobal switch logging enable/disablerw Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.2 |
systemSwitchLoggingFlashEnable/disable switch logging to flashrw Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.3 |
systemSwitchLoggingSocketEnable/disable switch logging to a socketrw Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.4 |
systemSwitchLoggingSocketIpAddrThe IP Address of a remote host that can
be used to send switch logging records to as an optionrwdeprecated IpAddress .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.5 |
systemSwitchLoggingConsoleEnable/disable switch logging to the consolerw Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.6 |
systemSwitchLoggingApplicationTableThe table of switch logging registered applications,one for
each Application ID SEQUENCE OF SystemSwitchLoggingLevelEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7 |
systemSwitchLoggingLevelEntryA row in the system switch logging application table SystemSwitchLoggingLevelEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1 |
systemSwitchLoggingApplicationAppIdA specific application ID which has a registered application
associated with it. This application ID is used as an index
into the application table.ro AppIdIndex .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.1 |
systemSwitchLoggingApplicationSubAppIdA specific sub-application ID which belongs to a registered
application associated with it. This sub-application ID is used
as part of the index into the application table.ro AppIdIndex .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.2 |
systemSwitchLoggingApplicationSubAppVrfLevelIndexThe specific sub-application's VRF severity level. This
severity level is used as part of the index into the
application table.ro Integer32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.3 |
systemSwitchLoggingApplicationAppNameApplication name in an entry in the tablero SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.4 |
systemSwitchLoggingApplicationSubAppNameThe name of the specific sub-application ID.ro SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.5 |
systemSwitchLoggingApplicationSubAppLevelThe severity level of the specific sub-application ID.ro SeverityLevel .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.6 |
systemSwitchLoggingApplicationSubAppVrfLevelStringA string with comma-delimited VRF IDs or ranges of VRF IDs
that belong to this sub-application's VRF severity level.ro SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.7 |
systemSwitchLoggingClearEnable clearing of switch logging entriesrw Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.8 |
systemSwitchLoggingFileSizeSet size of swlog logging filerw Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.9 |
systemSwitchLoggingHostTableThe table of switch logging remote hosts. SEQUENCE OF SystemSwitchLoggingHostEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10 |
systemSwitchLoggingHostEntryA remote switch logging server entry. SystemSwitchLoggingHostEntry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1 |
systemSwitchLoggingHostIpAddrThe IP Address of a remote host that can
be used to send switch logging records to.ro IpAddress .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.1 |
systemSwitchLoggingHostPortThe port number of a remote host that can
be used to send switch logging records to.rw Integer32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.2 |
systemSwitchLoggingHostStatusProvides the ability to add or remove a remote host entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.3 |
systemSwitchLoggingHostUserCommandHostIndicates whether this host may receive user
command data.rw Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.4 |
systemSwitchLoggingHostVrfNameThe name or number of the VRF to be used to send
switch logging records to.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.5 |
systemSwitchLoggingHostv6TableThe table of switch logging remote hosts. SEQUENCE OF SystemSwitchLoggingHostv6Entry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11 |
systemSwitchLoggingHostv6EntryA remote switch logging server entry. SystemSwitchLoggingHostv6Entry .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1 |
systemSwitchLoggingHostv6IpAddrThe IP Address of a remote host that can
be used to send switch logging records to.ro Ipv6Address (IPV6-TC) .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.1 |
systemSwitchLoggingHostv6PortThe port number of a remote host that can
be used to send switch logging records to.rw Integer32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.2 |
systemSwitchLoggingHostv6StatusProvides the ability to add or remove a remote host entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.3 |
systemSwitchLoggingHostv6UserCommandHostIndicates whether this host may receive user
command data.rw Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.4 |
systemSwitchLoggingHostv6VrfNameThe name or number of the VRF to be used to send
switch logging records to.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.5 |
systemSwitchLoggingHostCountThe number of remote hosts currently defined.ro Integer32 .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.12 |
systemSwitchLoggingConsoleLevelMessages whose severity level is equal to or more
severe than this value will be displayed to the console.rw SeverityLevel .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.13 |
systemSwitchLoggingUserCommandStatusUser commands will be logged to remote hosts when enabled.rw Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.14 |
systemSwitchLoggingSysLogFacilityIdThis textual convention enumerates the facilities
that originate syslog messages.
The Facilities of syslog messages are numerically
coded with decimal values.
Some of the operating system daemons and processes
are traditionally designated by the Facility values
given below. Daemons and processes that do not have
an explicitly assigned Facility may use any of the
'local use' Facilities or they may use the 'user-level'
Facility.
For interoperability and backwards compatibility
reasons, mapping specified in this document between
a label which represents a Facility and
the value which represents the corresponding code, is
normative. So the mapping from a label configured by
operators in syslog.conf or equivalent will consistently
map to the same Facility code regardless of
implementation, but the label itself is often
semantically meaningless, because it is impractical to
attempt to enumerate all possible facilities, and the
enumeration (label and corresponding value) that is used
by an actual Facility is, and has historically been,
implementation-dependent.
For example, the foobar application might log messages
as having come from local7, even though there is no
'local' process on the device, and the operator can
configure syslog.conf to have local7.critical messages
be relayed, even though there might be multiple facilities
using Facility local7. This is typical current practice,
and originators, relays and collectors know how to handle
this situation. For improved accuracy, the foobar
application can also include an APPNAME Structured Data
Element.rw SysLogFacilityId .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.15 |
systemSwitchLoggingLevelThe logging level for a specific application id.rw SeverityLevel .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.16 |
systemSwitchLoggingAppNameApplication name used as an index into the tablerw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.17 |
systemSwitchLoggingDuplicateDetectGlobal switch logging enable/disable duplicate detectionrw Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.18 |
systemSwitchLoggingPreambleGlobal switch logging enable/disable printing preamblerw Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.19 |
systemSwitchLoggingDebugGlobal switch logging enable/disable debug informationrw Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.20 |
systemSwitchLoggingVrfGlobal switch logging subapplicastion VRF IDrw VrfId .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.21 |
systemSwitchLoggingHashAgeLimitGlobal switch logging Hash Table Age Limitrw AgeLimit .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.22 |
systemSwitchLoggingTtyEnable/disable switch logging to ttyrw Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.23 |
systemSwitchLoggingSubAppNbrThe subapplication number of a given applicationrw AppIdIndex .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.24 |
systemSwitchLoggingLibraryNameLibrary name used as an index into the table of
registered librariesrw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.25 |
systemSwitchLoggingLoopback0Enable/disable switch logging using Loopback0
interface as the source ip address when logging
to syslog serverrw Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.26 |
systemDNS OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7 |
systemDNSEnableDnsResolverGlobal Domain Name Service enable/disablerw Enable .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.1 |
systemDNSDomainNamecurrent domain name used by the Domain Name Servicerw SnmpAdminString .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.2 |
systemDNSNsAddr11st part of address used by the Domain Name Servicerw IpAddress .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.3 |
systemDNSNsAddr22nd part of address used by the Domain Name Servicerw IpAddress .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.4 |
systemDNSNsAddr33rd part of address used by the Domain Name Servicerw IpAddress .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.5 |
systemDNSNsIPv6Addr1IPv6 address of the Primary DNS serverrw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.6 |
systemDNSNsIPv6Addr2IPv6 address of the Secondary DNS serverrw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.7 |
systemDNSNsIPv6Addr3IPv6 address of the third DNS serverrw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.8 |
alcatelIND1SystemMIBConformanceBranch For Alcatel IND BOP Proprietary System
Subsystem Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.1.1.2.1.2 |
alcatelIND1SystemMIBGroupsBranch For Alcatel IND BOP Proprietary System
Subsystem Units Of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1 |
alcatelIND1SystemMIBCompliancesBranch For Alcatel IND BOP Proprietary System
Subsystem Compliance Statements. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.1.1.2.1.2.2 |