ALCATEL-IND1-SESSION-MGR-MIB
The ALCATEL-IND1-SESSION-MGR-MIB provides SNMP access to monitor and manage user session states, connection counts, and session lifecycle events within the Alcatel-Lucent "Birds of Prey" product line. This module enables network administrators to track active session metrics and manage session termination or creation parameters for the associated User Sessions Manager subsystem.
Imported Objects
Objects
31 total| Object Name |
|---|
alcatelIND1SessionMgrMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
User Sessions Manager Subsystem.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.7.1 |
alcatelIND1SessionMgrMIBNotificationsBranch For Session manager MIB Subsystem Notifications. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.7.1.0 |
sessionAuthenticationTrapAuthentication Failure Trap is sent each time a user
authentication is refused. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.7.1.0.1 |
alcatelIND1SessionMgrMIBObjectsBranch For Session Manager Subsystem Managed Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.7.1.1 |
sessionMgr OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1 |
sessionConfigTableThe configuration parameters of a user session. SEQUENCE OF SessionConfigEntry .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.1 |
sessionConfigEntryAn entry of the session configuration table. SessionConfigEntry .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.1.1 |
sessionTypeThe type of the session interface.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.1.1.1 |
sessionBannerFileNameOptional Banner File Name.
For CLI, HTTP, and FTP sessions only.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.1.1.2 |
sessionInactivityTimerValueThe inactivity timer value for this type
of session, in minutes.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.1.1.3 |
sessionDefaultPromptStringPrompt string.
For CLI sessions only.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.1.1.4 |
sessionActiveTableA list of active users sessions. SEQUENCE OF SessionActiveEntry .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2 |
sessionActiveEntryAn entry in the session active table. SessionActiveEntry .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1 |
sessionIndexThe index of the session.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.1 |
sessionAccessTypeThe access type of the session.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.2 |
sessionPhysicalPortThe physical port type of the session.
notSignificant : use for console port or
when information is not available,
local : a serial port (e.g. the CMM console),
ether : an ethernet port (e.g. the EMP or NI)ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.3 |
sessionUserNameThe user name of the user logged-in.ro SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.4 |
sessionUserReadPrivilegesThe read privileges of the user logged-in.
These privileges are stored as a bitmap.
Each bit represents a command family.
The number of families may go up to 64.
Applied for functional authorization
(partitioned management).ro OCTET STRING .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.5 |
sessionUserWritePrivilegesThe write privileges of the user logged-in.
These privileges are stored as a bitmap.
Each bit represents a command family.
The number of families may go up to 64.
Applied for functional authorization
(partitioned management).ro OCTET STRING .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.6 |
sessionUserProfileNameThe profile name of the logged-in user.
Applied for the end-user partitioned management.roobsolete SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.7 |
sessionUserIpAddressThe IP address of the user logged-in.ro IpAddress .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.8 |
sessionRowStatusThe status of this table entry.
An entry in this table is dynamically created when a user
connects to the switch (through console, telnet, ftp or http).
The only value supported for set is destroy(6),
to kill a user session.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.2.1.9 |
sessionLoginTimeoutAt login time, it is the time in seconds to get
the password, after the username has been keyed in.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.3 |
sessionLoginAttemptThe maximum number of login attempts for one session.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.4 |
sessionCliCommandLogEnableCLI command logging status. Enable(1) will save all CLI set command
activilies on flash memory. Disable(2) will stop the recordrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.5 |
sessionXonXoffEnableEnable or disable xon-xoff flow control on console portrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.6 |
switchMgtTrapsObj OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.7 |
sessionAuthFailureThe reason why the user authentication failed.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.7.1.1.1.7.1 |
alcatelIND1SessionMgrMIBConformanceBranch For Session Manager Subsystem Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.7.1.2 |
alcatelIND1SessionMgrMIBGroupsBranch For Session Manager Subsystem Units Of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.7.1.2.1 |
alcatelIND1SessionMgrMIBCompliancesBranch For Session Manager Subsystem Compliance Statements. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.7.1.2.2 |
More MIBs from AL-Enterprise
Browse all AL-EnterpriseMIBs →The ALCATEL-IND1-QOS-MIB enables monitoring and configuration of Quality of Service (QoS) policies, traffic shaping parameters, and access control list (ACL) filtering rules on Alcatel-Lucent network infrastructure. It provides visibility into queue depths, packet discard rates, and bandwidth allocation statistics to enforce service level agreements and traffic prioritization.
The ALCATEL-IND1-SERVICE-MGR-MIB provides configuration parameters for the Alcatel-Lucent service manager feature, enabling the management of service provisioning, activation, and lifecycle states on carrier-grade network elements. This module facilitates the monitoring of service instance attributes and operational status to ensure correct delivery of managed services across the infrastructure.
The ALCATEL-IND1-FIPS-MIB module enables SNMP-based monitoring of MAC address learning tables and forwarding database states on Alcatel-Lucent Birds of Prey series network switches. It provides enterprise-specific access to layer 2 switching metrics, including learned MAC addresses and their associated port bindings, for traffic analysis and security auditing.
The ALCATEL-IND1-BGP-MIB enables SNMP-based monitoring and configuration of Border Gateway Protocol (BGP) parameters on Alcatel-Lucent network devices, specifically tracking BGP session states, neighbor relationships, and protocol-specific counters. This module provides visibility into the operational status and performance metrics of BGP routing processes to facilitate network troubleshooting and policy enforcement.
The ALCATEL-IND1-DEVICES MIB defines SNMP Object Identifiers for monitoring the physical inventory, chassis status, and module states of Alcatel-Lucent OmniSwitch 4000, 7000, 8000, and 9000 series networking hardware. It enables network management systems to retrieve device topology data, component presence, and hardware health indicators specific to these enterprise switching platforms.
The ALCATEL-IND1-AAA-MIB provides SNMP access to monitor and manage Authentication, Authorization, and Accounting (AAA) subsystem metrics on Alcatel-Lucent "Birds of Prey" network hardware, specifically tracking user session states, authentication failures, and accounting records.