ALCATEL-IND1-SAA-MIB
AI MIB Summary
The ALCATEL-IND1-SAA-MIB provides enterprise-specific SNMP access to the Service Assurance Agent (SAA) on Alcatel-Lucent "Birds of Prey" network devices, enabling the monitoring of active session states, link quality metrics, and diagnostic probe results for service-level verification.
This module describes an authoritative enterprise- specific Simple Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line Service Assurance agent.
The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1SaaMIB.1.3.6.1.4.1.6486.801.1.2.1.55.1
219
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
219 total| Object Name |
|---|
alcatelIND1SaaMIBThis module describes an authoritative enterprise-
specific Simple Network Management Protocol (SNMP) Management
Information Base (MIB):
For the Birds Of Prey Product Line
Service Assurance agent.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect,
special, or consequential damages whatsoever arising from or
related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.55.1 |
IMPORTSThis module describes an authoritative enterprise-
specific Simple Network Management Protocol (SNMP) Management
Information Base (MIB):
For the Birds Of Prey Product Line
Service Assurance agent.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect,
special, or consequential damages whatsoever arising from or
related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
ALL RIGHTS RESERVED WORLDWIDE Unknown .1.3.6.1.4.1.6486.801.1.2.1.55.1 |
alcatelIND1SaaNotificationsBranch for Saa Notifications. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.55.1.0 |
alaSaaIPIterationCompleteTrapA alaSaaIPIterationCompleteTrap notification is sent when a IP SAA iteration
is completed. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.55.1.0.1 |
alaSaaEthIterationCompleteTrapA alaSaaEthIterationCompleteTrap notification is sent when a Eth-LB
or Eth-DMM SAA iteration is completed. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.55.1.0.2 |
alaSaaMacIterationCompleteTrapA alaSaaIPIterationCompleteTrap notification is sent when a IP SAA iteration
is completed. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.55.1.0.3 |
alaSaaPacketLossTrapA alaSaaPacketLossTrap notification is sent when
a packet is lost during a test. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.55.1.0.4 |
alaSaaJitterThresholdYellowTrapA alaSaaJitterThresholdTrap notification is sent when 90% of
the Jitter Threshold is crossed. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.55.1.0.5 |
alaSaaRTTThresholdYellowTrapA alaSaaRTTThresholdYellowTrap notification is sent when 90% of
the RTT Threshold is crossed. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.55.1.0.6 |
alaSaaJitterThresholdRedTrapA alaSaaJitterThresholdTrap notification is sent when the
Jitter Threshold is crossed. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.55.1.0.7 |
alaSaaRTTThresholdRedTrapA alaSaaRTTThresholdRedTrap notification is sent when the
RTT Threshold is crossed. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.55.1.0.8 |
alcatelIND1SaaMIBObjectsBranch For Saa Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.55.1.1 |
alaSaaCtrlConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.1 |
alaSaaCtrlTableDefines the SAA control table for providing, via SNMP, the
capability of performing SAA test operations. SEQUENCE OF AlaSaaCtrlEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.1.1 |
alaSaaCtrlEntryAn entry in the alaSaaCtrlTable table, containing information on
the Saa function for a single instance of the Saa. AlaSaaCtrlEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.1.1.1 |
alaSaaCtrlOwnerIndexOwner name to identify the responsiblity of the entries
in the table.ro SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.1.1.1.1 |
alaSaaCtrlTestIndexUnique name to identify the entries in the table.
The name is unique across various SNMP users.ro SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.1.1.1.2 |
alaSaaCtrlRowStatusThis object allows entries to be created and deleted in the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.1.1.1.3 |
alaSaaCtrlDescrUser provided description string for the SAA.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.1.1.1.4 |
alaSaaCtrlAdminStatusIndicates wether to start or stop the SAA test.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.1.1.1.5 |
alaSaaCtrlTestModeThe type of SAA test to be performed. The undefined value corresponds to the case
when an entry is created in the alaSaaCtrlTable table without specifying a value for
this object. This value shall be updated when the user creates an entry for the
corresponding saa in the alaSaaIpCtrlTable table, alaSaaEthoamCtrlTable table or
alaSaaMacCtrlTable table.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.1.1.1.6 |
alaSaaCtrlRunsIndicates number of times SAA test has been executed.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.1.1.1.7 |
alaSaaCtrlFailuresIndicates the number of times this SAA test has failed.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.1.1.1.8 |
alaSaaCtrlLastRunResultThe result of the latest SAA test iteration.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.1.1.1.9 |
alaSaaCtrlLastRunTimeThe time at which the last iteration of the SAA was run.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.1.1.1.10 |
alaSaaCtrlIntervalInterval, in minutes, between two iterations of the SAA test.
Valid values are 1, 2, 5 and 10-1500.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.1.1.1.11 |
alaSaaCtrlStartAtSpecifies the time at which the SAA test
is to be started. The deci-seconds specified in DateAndTime
has no significance in scheduling SAA. The year in DateAndTime
must be in the range from 1970 to 2037.rw DateAndTime .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.1.1.1.12 |
alaSaaCtrlStopAtSpecifies the time at which the SAA test
is to be stopped.Special value for DataAndTime which is
9999-12-31,23:59:59.0 is used to reset the existing configured
value of this object, indicating that the SAA test should never stop.
The deci-seconds in the DateAndTime has no significance in scheduling
SAA.The year in DateAndTime must be in the range from 1970 to 2037.rw DateAndTime .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.1.1.1.13 |
alaSaaCtrlMaxHistoryRowsSpecifies the maximum number of iterations for which
history data is maintained.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.1.1.1.14 |
alaSaaCtrlJitterThresholdTrap is generated when the Jitter Threshold is crossed.
0 indicates it is diabled.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.1.1.1.15 |
alaSaaCtrlRTTThresholdTrap is generated when the RTT Threshold is crossed.
0 indicates it is diabled.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.1.1.1.16 |
alaSaaIpCtrlConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2 |
alaSaaIpCtrlTableIt defines the ping Control Table for providing the ping capability
via SNMP. The results of these tests are stored in the alaSaaIpResultsTable
and alaSaaIpHistoryTable. SEQUENCE OF AlaSaaIpCtrlEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1 |
alaSaaIpCtrlEntryEntry for the alaSaaIpCtrl table. AlaSaaIpCtrlEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1 |
alaSaaIpCtrlOwnerIndexOwner name to identify the responsiblity of the entries
in the table. SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.1 |
alaSaaIpCtrlTestIndexUnique name to identify the entries in the table.
This name is unique across various SNMP users. SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.2 |
alaSaaIpCtrlRowStatusAllows entries to be created and deleted in the table.
createAndWait value is not supported for this object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.3 |
alaSaaIpCtrlTestModeSpecifies the type of ping test defined by this entry.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.4 |
alaSaaIpCtrlTgtAddrTypeSpecifies the InetAddress type of host address to be used as the destination
for performing a ping operation. InetAddressIPv4(1) is the only type currently
supported.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.5 |
alaSaaIpCtrlTgtAddressSpecifies the IP host address to be used as the destination for
performing a ping operation.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.6 |
alaSaaIpCtrlSrcAddrTypeSpecifies the InetAddress type of host address to be used as the source for
performing a ping operation. InetAddressIPv4(1) is the only type currently
supported.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.7 |
alaSaaIpCtrlSrcAddressSpecifies the IP host address to be used as the source for performing
a ping operation. The default value of this object is 0.0.0.0 if
alaSaaIpCtrlSrcAddrType is set to ipv4.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.8 |
alaSaaIpCtrlPayloadSizeSpecifies the size of the ICMP payload to be used for the ping operation.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.9 |
alaSaaIpCtrlNumPktsSpecifies the number of packets to be sent in one ping iteration.Configuration of number of packets and inter packet delay should be such that total execution time remains less then 10s.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.10 |
alaSaaIpCtrlInterPktDelaySpecifies the delay between two consecutive packets transmitted
during a ping iteration.The value specified should be a multiple
of 100.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.11 |
alaSaaIpCtrlTypeOfServiceSpecifies the type of servicerw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.12 |
alaSaaIpCtrlVRFIdSpecifies the VRF ID. Only the value '0' is
currently supported.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.13 |
alaSaaIpCtrlTotalPktsSentSpecifies the total number of packets sent during all the ping iterations.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.14 |
alaSaaIpCtrlTotalPktsRcvdSpecifies the total number of packets received during all the ping iterations.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.15 |
alaSaaIpCtrlMinRTTSpecifies the minimum round trip time among all the iterations of the SAA.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.16 |
alaSaaIpCtrlAvgRTTSpecifies the average round trip time of all the iterations of the SAA.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.17 |
alaSaaIpCtrlMaxRTTSpecifies the maximum round trip time among all the iterations of the SAA.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.18 |
alaSaaIpCtrlMinJitterSpecifies the minimum jitter among all the iterations of the SAA.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.19 |
alaSaaIpCtrlAvgJitterSpecifies the average jitter of all the iterations of the SAA.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.20 |
alaSaaIpCtrlMaxJitterSpecifies the maximum jitter among all the iterations of the SAA.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.21 |
alaSaaIpCtrlTSMinRTTSpecifies the timestamp of the iteration that gave the minimum
packet delay.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.22 |
alaSaaIpCtrlTSMaxRTTSpecifies the timestamp of the iteration that gave the maximum
packet delay.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.23 |
alaSaaIpCtrlTSMinJitterSpecifies the timestamp of the iteration that gave the minimum
packet jitter.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.24 |
alaSaaIpCtrlTSMaxJitterSpecifies the timestamp of the iteration that gave the maximum
packet jitter.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.2.1.1.25 |
alaSaaIpResults OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.3 |
alaSaaIpResultsTableDefines the IP Results Table for providing
the capability of performing IP Ping operations. The
results of these operations are stored in the
alaSaaIpResultsTable and the alaSaaIpHistoryTable.
An entry is removed from the alaSaaIpResultsTable when
its corresponding alaSaaCtrlEntry is deleted. SEQUENCE OF AlaSaaIpResultsEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.3.1 |
alaSaaIpResultsEntryEntry for the alaSaaResults table.
An entry in this table summarizes results from multiple
invocations of the test configured by the corresponding
entry in alaSaaIpCtrlTable. AlaSaaIpResultsEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.3.1.1 |
alaSaaIpResultsTestRunIndexThe value of alaSaaIpResultsTestRunIndex identifies the
row entry that reports results for a single OAM test run.
The value of this object starts from 1 and can go upto a
maximum of alaSaaCtrlMaxHistoryRows.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.3.1.1.1 |
alaSaaIpResultsPktsSentSpecifies the number of packets sent during a single ping iteration.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.3.1.1.2 |
alaSaaIpResultsPktsRcvdSpecifies the number of packets received during a single ping iteration.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.3.1.1.3 |
alaSaaIpResultsInterPktDelaySpecifies the inter-packet-delay with which the packets were sent
in the iteration.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.3.1.1.4 |
alaSaaIpResultsRunResultThe result of the iteration.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.3.1.1.5 |
alaSaaIpResultsRunResultReasonIf the iteration fails, this field indicates the reason
for failure. If the reason for failure cannot be determined
the value of this field is the string Unknown.
For successful iterations, the value of this field is the
string 'Iteration successful'.ro OCTET STRING .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.3.1.1.6 |
alaSaaIpResultsRunTimeThe date and time at which the iteraton was run.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.3.1.1.7 |
alaSaaIpResultsMinRTTThe minimum round trip time.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.3.1.1.8 |
alaSaaIpResultsAvgRTTThe average round trip time.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.3.1.1.9 |
alaSaaIpResultsMaxRTTThe maximum round trip time.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.3.1.1.10 |
alaSaaIpResultsMinJitterMinumum jitter value.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.3.1.1.11 |
alaSaaIpResultsAvgJitterAverage jitter value.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.3.1.1.12 |
alaSaaIpResultsMaxJitterMaximum jitter valuero Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.3.1.1.13 |
alaSaaIpHistory OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.4 |
alaSaaIpHistoryTableIt is the table for storing the results of a ping operation. An entry
in this table is created when a ping operation is performed. Entries
are removed from this table when its corresponding alaSaaCtrlEntry is
deleted. SEQUENCE OF AlaSaaIpHistoryEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.4.1 |
alaSaaIpHistoryEntryEntry of the alaSaaIpHistory table. AlaSaaIpHistoryEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.4.1.1 |
alaSaaIpHistoryIndexAn entry in this table is created when the result of
a ping iteration is determined. The initial 2 instance
identifier index values identify the alaSaaIpPingCtrlEntry
that a ping iteration result (alaSaaIpHistoryEntry) belongs
to. The alaSaaIpHistoryIndex element selects a single ping
iteration result.
The value of this object starts from 1 and can go up to 20,history of first 20 packets will be stored. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.4.1.1.1 |
alaSaaIpHistoryPktRTTThe round trip time taken by a single packet in an iteration.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.4.1.1.2 |
alaSaaIpHistoryPktJitterThe jitter value for a single packet in an iteration.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.4.1.1.3 |
alaSaaEthoamCtrlConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5 |
alaSaaEthoamCtrlTableDefines the table for providing, via SNMP, the capability of
performing Ethernet Loopback and DMM test operations. The results
of these tests are stored in the alaSaaEthoamResultsTable and
the alaSaaEthoamHistoryTable. SEQUENCE OF AlaSaaEthoamCtrlEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1 |
alaSaaEthoamCtrlEntryDefines an entry in the alaSaaEthoamCtrlTable. AlaSaaEthoamCtrlEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1 |
alaSaaEthoamCtrlOwnerIndexOwner name to identify the responsiblity of the entries
in the table. SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.1 |
alaSaaEthoamCtrlTestIndexUnique name to identify the entries in the table.
This name is unique across various SNMP users. SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.2 |
alaSaaEthoamCtrlRowStatusThis object allows entries to be created and deleted
in the alaSaaEthoamCtrlTable. Deletion of an entry in this
table results in all corresponding (same
alaSaaEthoamCtrlOwnerIndex and alaSaaEthoamCtrlTestIndex index
values) alaSaaEthoamResultsTable and alaSaaEthoamHistoryTable
entries being deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.3 |
alaSaaEthoamCtrlTestModeSpecifies the type of Ethernet OAM test defined by this entry.
ethernetLoopback - tests connectivity and round trip time by
sending loopback requests.
ethernetDmm - tests connectivity and round trip time by sending
timestamped packets.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.4 |
alaSaaEthoamCtrlTgtMepIdThe Mep-Id of the destination to which the Ethernet Loopback or
DMM message is to be sent. Either alaSaaEthoamCtrlTgtMepId or
alaSaaEthoamCtrlTgtMAC should be specified while configuring
an alaSaaEthoamCtrlEntry.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.5 |
alaSaaEthoamCtrlTgtMACThe Target MAC Address of the destination to which the Ethernet
Loopback or DMM message is to be sent: A unicast
destination MAC address. Either alaSaaEthoamCtrlTgtMepId or
alaSaaEthoamCtrlTgtMAC should be specified while configuring
an alaSaaEthoamCtrlEntry.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.6 |
alaSaaEthoamCtrlSrcMepIdThe Mep-Id of the source node initiating the Ethernet Loopback or
DMM message.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.7 |
alaSaaEthoamCtrlDomainNameThe name of the domain to which the source Mep belongs.rw Dot1agCfmMaintDomainName .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.8 |
alaSaaEthoamCtrlAssociationNameThe name of the association in the domain (specified by
alaSaaEthoamCtrlDomainName) to which the source Mep belongs.rw Dot1agCfmMaintAssocName .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.9 |
alaSaaEthoamCtrlPktTimeOutThe maximum time to wait for the reply of the transmitted packet.ro Integer32 UNITS "milli-seconds" .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.10 |
alaSaaEthoamCtrlNumPktsThe number of packets to be sent in one iteration of Eth-LB/DMM test.Configuration of number of packets and inter packet delay should be such that total execution time remains less then 10s.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.11 |
alaSaaEthoamCtrlInterPktDelaySpecifies the delay between two consecutive packets transmitted
during an iteration. The value specified should be a
multiple of 100.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.12 |
alaSaaEthoamCtrlPktDataAn arbitrary amount of data to be included in the Data TLV,
if the Data TLV is selected to be sent.rw OCTET STRING .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.13 |
alaSaaEthoamCtrlVlanPriorityPriority. 3 bit value to be used in the VLAN tag, if present
in the transmitted frame.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.14 |
alaSaaEthoamCtrlDropEligibleDrop Enable bit value to be used in the VLAN tag, if present
in the transmitted frame.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.15 |
alaSaaEthoamCtrlTotalPktsRcvdSpecifies the total number of packets received during all the Eth-LB/DMM
iterations.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.16 |
alaSaaEthoamCtrlTotalPktsSentSpecifies the total number of packets sent during all the Eth-LB/DMM
iterations.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.17 |
alaSaaEthoamCtrlMinRTTSpecifies the minimum round trip time among all the iterations of the SAA.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.18 |
alaSaaEthoamCtrlAvgRTTSpecifies the average round trip time of all the iterations of the SAA.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.19 |
alaSaaEthoamCtrlMaxRTTSpecifies the maximum round trip time among all the iterations of the SAA.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.20 |
alaSaaEthoamCtrlMinJitterSpecifies the minimum jitter among all the iterations of the SAA.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.21 |
alaSaaEthoamCtrlAvgJitterSpecifies the average jitter of all the iterations of the SAA.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.22 |
alaSaaEthoamCtrlMaxJitterSpecifies the maximum jitter among all the iterations of the SAA.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.23 |
alaSaaEthoamCtrlTSMinRTTThe timestamp of the iteration that gave the minimum
packet delay.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.24 |
alaSaaEthoamCtrlTSMaxRTTThe timestamp of the iteration that gave the maximum
packet delay.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.25 |
alaSaaEthoamCtrlTSMinJitterThe timestamp of the iteration that gave the minimum
packet jitter.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.26 |
alaSaaEthoamCtrlTSMaxJitterThe timestamp of the iteration that gave the maximum
packet jitter.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.5.1.1.27 |
alaSaaEthoamResults OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.6 |
alaSaaEthoamResultsTableDefines the Ethoam Results Table for providing
the capability of performing Eth-LB/DMM operations. The
results of these operations are stored in the
alaSaaEthoamResultsTable and the alaSaaEthoamHistoryTable.
An entry is removed from the alaSaaEthoamResultsTable when
its corresponding alaSaaCtrlEntry is deleted. SEQUENCE OF AlaSaaEthoamResultsEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.6.1 |
alaSaaEthoamResultsEntryDefines an entry in the alaSaaEthoamResultsTable. The
alaSaaEthoamResultsTable has the same indexing as the
alaSaaEthoamCtrlTable in order for a alaSaaEthoamResultsEntry to
correspond to the alaSaaEthoamCtrlEntry that caused it to
be created.
An entry in this table summarizes results from multiple
invocations of the test configured by the corresponding
entry in alaSaaEthoamCtrlTable. AlaSaaEthoamResultsEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.6.1.1 |
alaSaaEthoamResultsTestRunIndexThe value of alaSaaEthoamResultsTestRunIndex identifies the
row entry that reports results for a single Eth-LB/DMM test run.
The value of this object starts from 1 and can go upto a
maximum of alaSaaCtrlMaxHistoryRows.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.6.1.1.1 |
alaSaaEthoamResultsPktsSentSpecifies the number of packets sent during a single Eth-LB/DMM
iteration.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.6.1.1.2 |
alaSaaEthoamResultsPktsRcvdSpecifies the number of packets received during a single Eth-LB/DMM
iterationro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.6.1.1.3 |
alaSaaEthoamResultsInterPktDelaySpecifies the inter-packet-delay with which the packets were sent
in the iteration.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.6.1.1.4 |
alaSaaEthoamResultsRunResultThe result of the Eth-LB/DMM iteration.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.6.1.1.5 |
alaSaaEthoamResultsRunResultReasonIf the iteration fails, this field indicates the reason
for failure. If the reason for failure cannot be determined
the value of this field is the string Unknown.
For successful iterations, the value of this field is the
string 'Iteration successful'.ro OCTET STRING .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.6.1.1.6 |
alaSaaEthoamResultsRunTimeThe date and time at which the iteraton was run.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.6.1.1.7 |
alaSaaEthoamResultsMinRTTThe minimum round trip time.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.6.1.1.8 |
alaSaaEthoamResultsAvgRTTThe average round trip time.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.6.1.1.9 |
alaSaaEthoamResultsMaxRTTThe maximum round trip time.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.6.1.1.10 |
alaSaaEthoamResultsMinJitterThe minimum jitter value.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.6.1.1.11 |
alaSaaEthoamResultsAvgJitterThe average jitter value.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.6.1.1.12 |
alaSaaEthoamResultsMaxJitterThe maximum jitter value.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.6.1.1.13 |
alaSaaEthoamHistory OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.7 |
alaSaaEthoamHistoryTableDefines a table for storing the results of an Eth-LB/DMM
iteration.
The number of entries in this table for
a configured test are limited by the value of the
corresponding alaSaaCtrlMaxHistoryRows object.
An entry in this table is created when the result of an Eth-LB/DMM
test is determined. An entry is removed from this table when
its corresponding alaSaaEthoamCtrlEntry is deleted.
The agent removes the oldest entry for a test in the
alaSaaEthoamHistoryTable to allow the addition of a new
entry for that test once the number of rows in the
alaSaaEthoamHistoryTable reaches the value specified by
alaSaaCtrlMaxHistoryRows. SEQUENCE OF AlaSaaEthoamHistoryEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.7.1 |
alaSaaEthoamHistoryEntry AlaSaaEthoamHistoryEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.7.1.1 |
alaSaaEthoamHistoryIndexAn entry in this table is created when the result of
an Eth-LB/DMM iteration is determined. The initial 2 instance
identifier index values identify the alaSaaEthoamCtrlEntry
that an Eth-LB/DMM iteration result (alaSaaEthoamHistoryEntry) belongs
to. The alaSaaEthoamHistoryIndex element selects a single ping
iteration result.
The value of this object starts from 1 and can go up to 20,history of first 20 packets will be stored. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.7.1.1.1 |
alaSaaEthoamHistoryPktRTTThe round trip time taken by a single packet in an iteration.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.7.1.1.2 |
alaSaaEthoamHistoryPktJitterThe jitter value for a single packet in an iteration.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.7.1.1.3 |
alaSaaMacCtrlConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8 |
alaSaaMacCtrlTableIt defines the MAC-Ping Control Table for providing the ping capability
via SNMP. The results of these tests are stored in the alaSaaMacResultsTable
and alaSaaMacHistoryTable. SEQUENCE OF AlaSaaMacCtrlEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1 |
alaSaaMacCtrlEntryEntry for the alaSaaMacCtrl table. AlaSaaMacCtrlEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1 |
alaSaaMacCtrlOwnerIndexOwner name to identify the responsiblity of the entries
in the table. SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.1 |
alaSaaMacCtrlTestIndexUnique name to identify the entries in the table.
This name is unique across various SNMP users. SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.2 |
alaSaaMacCtrlRowStatusAllows entries to be created and deleted in the table.
createAndWait value is not supported for this object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.3 |
alaSaaMacCtrlDstAddressSpecifies the mac address to be used as the destination for
performing a MAC-Ping operation.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.4 |
alaSaaMacCtrlVlanThe 12 bit Vlan value to be used in the VLAN tag,
in the transmitted frame.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.5 |
alaSaaMacCtrlVlanPriorityPriority. 3 bit value to be used in the VLAN tag, if present
in the transmitted frame.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.6 |
alaSaaMacCtrlIsidThe i-domain Service Indentifier (I-SID) which
identifies the service instance in a PBB network on a
BEB switch. For a customer packet flowing
toward the b-domain, the I-SID is derived from the VFI
and inserted into the packet. For a packet arrived from
the b-domain, the I-SID is used to identify the VFI for
the i-domain processing.
From the service MIB.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.7 |
alaSaaMacCtrlPktDataAn arbitrary amount of data to be included in the Data TLV,
if the Data TLV is selected to be sent.rw OCTET STRING .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.8 |
alaSaaMacCtrlDropEligibleDrop Enable bit value to be used in the VLAN tag, if present
in the transmitted frame.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.9 |
alaSaaMacCtrlPayloadSizeSpecifies the size of the MAC-Ping payload to be used for the MAC-Ping operation.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.10 |
alaSaaMacCtrlNumPktsSpecifies the number of packets to be sent in one MAC-Ping iteration.Configuration of number of packets and inter packet delay should be such that total execution time remains less then 10s.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.11 |
alaSaaMacCtrlInterPktDelaySpecifies the delay between two consecutive packets transmitted
during a MAC-Ping iteration.The value specified should be a multiple
of 100.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.12 |
alaSaaMacCtrlTotalPktsSentSpecifies the total number of packets sent during all the ping iterations.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.13 |
alaSaaMacCtrlTotalPktsRcvdSpecifies the total number of packets received during all the ping iterations.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.14 |
alaSaaMacCtrlMinRTTSpecifies the minimum round trip time among all the iterations of the SAA.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.15 |
alaSaaMacCtrlAvgRTTSpecifies the average round trip time of all the iterations of the SAA.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.16 |
alaSaaMacCtrlMaxRTTSpecifies the maximum round trip time among all the iterations of the SAA.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.17 |
alaSaaMacCtrlMinJitterSpecifies the minimum jitter among all the iterations of the SAA.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.18 |
alaSaaMacCtrlAvgJitterSpecifies the average jitter of all the iterations of the SAA.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.19 |
alaSaaMacCtrlMaxJitterSpecifies the maximum jitter among all the iterations of the SAA.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.20 |
alaSaaMacCtrlTSMinRTTSpecifies the timestamp of the iteration that gave the minimum
packet delay.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.21 |
alaSaaMacCtrlTSMaxRTTSpecifies the timestamp of the iteration that gave the maximum
packet delay.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.22 |
alaSaaMacCtrlTSMinJitterSpecifies the timestamp of the iteration that gave the minimum
packet jitter.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.23 |
alaSaaMacCtrlTSMaxJitterSpecifies the timestamp of the iteration that gave the maximum
packet jitter.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.8.1.1.24 |
alaSaaMacResults OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.9 |
alaSaaMacResultsTableDefines the MAC-Ping Results Table for providing
the capability of performing MAC-Ping operations. The
results of these operations are stored in the
alaSaaMacResultsTable and the alaSaaMacHistoryTable.
An entry is removed from the alaSaaMacResultsTable when
its corresponding alaSaaCtrlEntry is deleted. SEQUENCE OF AlaSaaMacResultsEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.9.1 |
alaSaaMacResultsEntryDefines an entry in the alaSaaMacResultsTable. The
alaSaaMacResultsTable has the same indexing as the
alaSaaMacCtrlTable in order for a alaSaaMacResultsEntry to
correspond to the alaSaaMacCtrlEntry that caused it to
be created.
An entry in this table summarizes results from multiple
invocations of the test configured by the corresponding
entry in alaSaaMacCtrlTable. AlaSaaMacResultsEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.9.1.1 |
alaSaaMacResultsTestRunIndexThe value of alaSaaMacResultsTestRunIndex identifies the
row entry that reports results for a single test run.
The value of this object starts from 1 and can go upto a
maximum of alaSaaCtrlMaxHistoryRows.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.9.1.1.1 |
alaSaaMacResultsPktsSentSpecifies the number of packets sent during a single MAC-Ping
iteration.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.9.1.1.2 |
alaSaaMacResultsPktsRcvdSpecifies the number of packets received during a single MAC-Ping
iterationro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.9.1.1.3 |
alaSaaMacResultsInterPktDelaySpecifies the inter-packet-delay with which the packets were sent
in the iteration.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.9.1.1.4 |
alaSaaMacResultsRunResultThe result of the MAC-Ping iteration.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.9.1.1.5 |
alaSaaMacResultsRunResultReasonIf the iteration fails, this field indicates the reason
for failure. If the reason for failure cannot be determined
the value of this field is the string Unknown.
For successful iterations, the value of this field is the
string 'Iteration successful'.ro OCTET STRING .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.9.1.1.6 |
alaSaaMacResultsRunTimeThe date and time at which the iteraton was run.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.9.1.1.7 |
alaSaaMacResultsMinRTTThe minimum round trip time.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.9.1.1.8 |
alaSaaMacResultsAvgRTTThe average round trip time.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.9.1.1.9 |
alaSaaMacResultsMaxRTTThe maximum round trip time.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.9.1.1.10 |
alaSaaMacResultsMinJitterThe minimum jitter value.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.9.1.1.11 |
alaSaaMacResultsAvgJitterThe average jitter value.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.9.1.1.12 |
alaSaaMacResultsMaxJitterThe maximum jitter value.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.9.1.1.13 |
alaSaaMacHistory OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.10 |
alaSaaMacHistoryTableDefines a table for storing the results of a MAC-Ping
iteration.
The number of entries in this table for
a configured test are limited by the value of the
corresponding alaSaaCtrlMaxHistoryRows object.
An entry in this table is created when the result of an MAC-Ping
test is determined. An entry is removed from this table when
its corresponding alaSaaMacCtrlEntry is deleted.
The agent removes the oldest entry for a test in the
alaSaaMacHistoryTable to allow the addition of a new
entry for that test once the number of rows in the
alaSaaMacHistoryTable reaches the value specified by
alaSaaCtrlMaxHistoryRows. SEQUENCE OF AlaSaaMacHistoryEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.10.1 |
alaSaaMacHistoryEntry AlaSaaMacHistoryEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.10.1.1 |
alaSaaMacHistoryIndexAn entry in this table is created when the result of
an MAC-ping iteration is determined. The initial 2 instance
identifier index values identify the alaSaaMacCtrlEntry
that an MAC-ping iteration result (alaSaaMacHistoryEntry) belongs
to. The alaSaaMacHistoryIndex element selects a single ping
iteration result.
The value of this object starts from 1 and can go up to 20,history of first 20 packets will be stored. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.10.1.1.1 |
alaSaaMacHistoryPktRTTThe round trip time taken by a single packet in an iteration.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.10.1.1.2 |
alaSaaMacHistoryPktJitterThe jitter value for a single packet in an iteration.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.10.1.1.3 |
alaSaaMacResultsPort OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.11 |
alaSaaMacResultsPortTableDefines a table for storing the results of ports for a MAC-Ping
iteration.
It only holds results from the last iteration. SEQUENCE OF AlaSaaMacResultsPortEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.11.1 |
alaSaaMacResultsPortEntry AlaSaaMacResultsPortEntry .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.11.1.1 |
alaSaaMacResultsPortChassisThe chassis number of the entry.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.11.1.1.1 |
alaSaaMacResultsPortSlotThe slot number of the entry.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.11.1.1.2 |
alaSaaMacResultsPortPortThe port number of the entry.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.11.1.1.3 |
alaSaaMacResultsPortPktsSentThe number of transmit packets.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.11.1.1.4 |
alaSaaMacResultsPortPktsRcvdThe number of receive packets.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.11.1.1.5 |
alaSaaMacResultsPortRTTThe round trip time taken by a single packet in an iteration.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.11.1.1.6 |
alaSaaMacResultsPortMinRTTThe minimum round trip time taken by a single packet for the port.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.11.1.1.7 |
alaSaaMacResultsPortMaxRTTThe maximum round trip time taken by a single for the port.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.11.1.1.8 |
alaSaaMacResultsPortJitterThe jitter value for a single packet in an iteration.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.11.1.1.9 |
alaSaaMacResultsPortMinJitterThe minimum jitter value for a single packet for the port.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.11.1.1.10 |
alaSaaMacResultsPortMaxJitterThe maximum jitter value for a single packet for the port.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.11.1.1.11 |
alaSaaXmlFeature OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.13 |
alaSaaXmlStatusEnables the XML file feature.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.13.1 |
alaSaaXmlFilenameSave file location.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.13.2 |
alaSaaXmlIntervalInterval where SAA will save the file. The value is in minutes.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.13.3 |
alaSaaSpbFeature OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.14 |
alaSaaSpbAutoCreateDetermines if the SPB VLANs are automatically configured.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.14.1 |
alaSaaSpbAutoStartDetermines if the SPB VLANs are automatically started.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.14.2 |
alaSaaSpbIntervalInterval, in minutes, between two iterations of the SAA test.
Valid values are 1, 2, 5 and 10-1500.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.14.3 |
alaSaaSpbNumPktsThe number of packets to be sent in one iteration of Eth-LB/DMM test.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.14.4 |
alaSaaSpbInterPktDelaySpecifies the delay between two consecutive packets transmitted
during an iteration. The value specified should be a
multiple of 100.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.14.5 |
alaSaaSpbPayloadSizeSpecifies the size of the MAC-Ping payload to be used for the MAC-Ping operation.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.14.6 |
alaSaaSpbVlanPriorityPriority. 3 bit value to be used in the VLAN tag, if present
in the transmitted frame.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.14.7 |
alaSaaSpbDropEligibleDrop Enable bit value to be used in the VLAN tag, if present
in the transmitted frame.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.14.8 |
alaSaaSpbPktDataAn arbitrary amount of data to be included in the Data TLV,
if the Data TLV is selected to be sent.rw OCTET STRING .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.14.9 |
alaSaaSpbJitterThresholdTrap is generated when the Jitter Threshold is crossed.
0 indicates it is diabled.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.14.10 |
alaSaaSpbRTTThresholdTrap is generated when the RTT Threshold is crossed.
0 indicates it is diabled.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.14.11 |
alaSaaSpbResetWhen set TRUE, will set the alaSaaSpbFeature variables
to the defualts.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.14.12 |
alaSaaSpbKeepWhen set on, SPB sessions will not be deallocated when SPB indicates a MAC or VLAN went away.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.14.13 |
alaSaaSpbFlushWhen set TRUE, SPB sessions will be flushed and reallocated with the current SPB MACs and VLANs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.14.14 |
saaTrapsObj OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.55.1.1.15 |
alcatelIND1SaaMIBConformanceBranch for Saa Module MIB Subsystem Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.55.1.2 |
alcatelIND1SaaMIBGroupsBranch for Saa Module MIB Subsystem Units of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.55.1.2.1 |
alcatelIND1SaaMIBCompliancesBranch for Saa Module MIB Subsystem Compliance Statements. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.55.1.2.2 |