ALCATEL-IND1-ROUTEMAP-MIB
AI MIB Summary
The ALCATEL-IND1-ROUTEMAP-MIB enables SNMP-based monitoring and configuration of IP route map global parameters on Alcatel-Lucent networking devices. It exposes specific route map entries, match conditions, and set actions to facilitate policy-based routing and traffic redirection management.
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB):
This proprietary MIB contains management information for the configuration of IP Route Maps global configuration parameters.
The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2006 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1RouteMapMIB.1.3.6.1.4.1.6486.801.1.2.1.10.2.3
47
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
47 total| Object Name |
|---|
alcatelIND1RouteMapMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This proprietary MIB contains management information for
the configuration of IP Route Maps global configuration
parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2006 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.10.2.3 |
alcatelIND1RouteMapMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1 |
alaRouteMapConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1 |
alaRouteMapRedistProtoTableProtocol based configuration for route redistribution. SEQUENCE OF AlaRouteMapRedistProtoEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1 |
alaRouteMapRedistProtoEntryIdentifies the source protocol and Route Map to be matched
for route redistribution. If the route matches one of the source
protocols Route Maps, and the Route Map is of type permit, then
the route will be redistributed to the destination protocol. AlaRouteMapRedistProtoEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1 |
alaRouteMapRedistSrcProtoIdThe source protocol of the route to be redistributed. Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.1 |
alaRouteMapRedistDestProtoIdThe protocol that a route is distributed into. Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.2 |
alaRouteMapRedistRouteMapIndexIndex indicating Route Map to use for redistribution match.
In the destroy case the value 0 indicates all route-maps. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.3 |
alaRouteMapRedistStatusEnable or disable the reditribution of routes into
the specified protocol.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.4 |
alaRouteMapRedistAddressTypeThe address family of the source and destination protocols.
The set is constrained to ipv4 and ipv6.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.5 |
alaRouteMapRedistRowStatusControls creation and deletion of Row Status entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.6 |
alaRouteMapAccessListNameTableTable containing Access List name to Access List bindings. SEQUENCE OF AlaRouteMapAccessListNameEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2 |
alaRouteMapAccessListNameEntryEach entry binds an Access List Name to an Access List index. AlaRouteMapAccessListNameEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1 |
alaRouteMapAccessListNameThe name of an Access List. DisplayString .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1.1 |
alaRouteMapAccessListNameIndexThe index associated with the Access List name.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1.2 |
alaRouteMapAccessListNameAddressTypeThe type of address in this Access List. The set is
constrained to ipv4 and ipv6.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1.3 |
alaRouteMapAccessListNameRowStatusControls creation and deletion of Row Status entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1.4 |
alaRouteMapAccessListTableThis table contains all Access Lists configured on the switch. SEQUENCE OF AlaRouteMapAccessListEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3 |
alaRouteMapAccessListEntryEach entry identifies an IPv4 or IPv6 address or subnet to
match for route redistribution. AlaRouteMapAccessListEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1 |
alaRouteMapAccessListIndexThe index associated with the Access List name. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.1 |
alaRouteMapAccessListAddressTypeThe type of address in this Access List Table Entry.
The set is constrained to ipv4 and ipv6. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.2 |
alaRouteMapAccessListAddressThe IPv4 or IPv6 address associated with this access list entry.
The type is identified by alaRouteMapAccessListAddressType. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.3 |
alaRouteMapAccessListPrefixLengthThe prefix length in bits of the IPv4 or IPv6 address
associated with this Access List entry. The maximum
for IPv4 is 32. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.4 |
alaRouteMapAccessListRedistControlControls how a route is matched and redistributed.
allSubnets matches all subnets of the prefix. noSubnets
only matches the exact prefix. aggregate matches all subnets
of the prefix, but only redistributes the prefix.rw AlaRouteMapRedistControl .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.5 |
alaRouteMapAccessListActionControls whether an address should be redistributed or
denied, if an Access list entry is matched.rw AlaRouteMapAction .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.6 |
alaRouteMapAccessListRowStatusControls creation and deletion of Row Status entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.7 |
alaRouteMapNameTableTable containing Route Map name to Route Map index bindings. SEQUENCE OF AlaRouteMapNameEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4 |
alaRouteMapNameEntryEach entry binds a Route Map Name to a Route Map index. AlaRouteMapNameEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4.1 |
alaRouteMapNameThe name of a Route Map. DisplayString .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4.1.1 |
alaRouteMapNameIndexThe index associated with the Route Map name.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4.1.2 |
alaRouteMapNameRowStatusControls creation and deletion of Row Status entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4.1.3 |
alaRouteMapSequenceTableTable binds a sequence to a Route Map. SEQUENCE OF AlaRouteMapSequenceEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5 |
alaRouteMapSequenceEntryEach entry binds a Route Map and a Sequence. AlaRouteMapSequenceEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1 |
alaRouteMapSequenceIndexA Route Map Index. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1.1 |
alaRouteMapSequenceNumberThe Sequence Number indicating the position of sequences
with the same Route Map index. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1.2 |
alaRouteMapSequenceActionControls whether a sequence, if matched, should be redistributed or
denied.rw AlaRouteMapAction .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1.3 |
alaRouteMapSequenceRowStatusControls creation and deletion of Row Status entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1.4 |
alaRouteMapTableProtocol based configuration for route redistribution. SEQUENCE OF AlaRouteMapEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6 |
alaRouteMapEntryEach entry describes a match or set clause in a Route Map. AlaRouteMapEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1 |
alaRouteMapIndexThe index associated with the Route Map name. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.1 |
alaRouteMapSequenceRoute Maps are linked together using sequence numbers.
All Route Maps with the same index and with different
sequence numbers are linked together and processed in
order of increasing sequence number. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.2 |
alaRouteMapTypeThe type of match or set command in this entry. Route Map
rows with the same Route Map Name, Sequence Number and
Match/Set Type form a group. An entry within the group is
uniquely identified by this Route Map Table object. Any
match within the group is considered a successful match
for the entire group, and matching will continue with the
next group. AlaRouteMapType .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.3 |
alaRouteMapValueThe string following the match or set keyword in a
Route Map CLI command. DisplayString .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.4 |
alaRouteMapRowStatusControls creation and deletion of Row Status entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.5 |
alcatelIND1RouteMapMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.2 |
alcatelIND1RouteMapMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.2.1 |
alcatelIND1RouteMapMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.2.3.2.2 |