ALCATEL-IND1-QCN-MIB
AI MIB Summary
The ALCATEL-IND1-QCN-MIB module enables SNMP-based configuration of the Birds of Prey product line's System Capability Manager to enforce hardware feature limits and optimize system performance by restricting operational capabilities below physical thresholds. It facilitates centralized control over feature enablement and resource allocation across Alcatel-Lucent hardware processes to prevent over-subscription and ensure stability.
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line System Capability Manager, to allow for system control and limitation setting, of different, features through out the system. Capability manager is a centralized process which provides hardware information and capability to other processes. To optimize the system performance , certain features may be configured to a lower than the hardware limit through capability manager.
The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2011 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1QcnMIB.1.3.6.1.4.1.6486.801.1.2.1.71.1
19
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
19 total| Object Name |
|---|
alcatelIND1QcnMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
System Capability Manager, to allow for system control and limitation setting, of
different, features through out the system.
Capability manager is a centralized process which provides hardware information and
capability to other processes. To optimize the system performance , certain features
may be configured to a lower than the hardware limit through capability manager.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2011 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.71.1 |
alcatelIND1QcnMIBObjectsBranch For QCN Subsystem Managed Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.71.1.1 |
alaQcnConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1 |
alaQcnGlobalTableA table of QCN global configuration. SEQUENCE OF AlaQcnGlobalEntry .1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.1 |
alaQcnGlobalEntryA QCN global Entry. AlaQcnGlobalEntry .1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.1.1 |
alaQcnGlobalCompIdComp Id is the index to this table. Integer32 (1) .1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.1.1.1 |
alaQcnGlobalCNMVlanTagWhen set, the vlan tag overrides the incoming vlan id and forces
CNMs to be transmitted in that vlan.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.1.1.2 |
alaQcnGlobalCIDSets the Congestion Point ID sent as part of the Congestion
Notification Message.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.1.1.3 |
alaQcnPortInstanceTableA table of DCP Port Instances. SEQUENCE OF AlaQcnPortInstanceEntry .1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.2 |
alaQcnPortInstanceEntryA DCP Port Instance Entry. AlaQcnPortInstanceEntry .1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.2.1 |
alaQcnPIIfIndexIfIndex of this port. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.2.1.1 |
alaQcnPIPriorityPriority identifier of this port. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.2.1.2 |
alaQcnPIPriorityResetSet to true to reset the priority configuration to the global default.rw TruthValue { true(1) } .1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.2.1.3 |
alaQcnPICncpStatsClearSet to true to clear the cncp statistics for this port
priority. Will do nothing if stats are disabled.rw TruthValue { true(1) } .1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.2.1.4 |
alaQcnPICncpResetSet to true to reset the cncp configuration to the global default for
this port priority.rw TruthValue { true(1) } .1.3.6.1.4.1.6486.801.1.2.1.71.1.1.1.2.1.5 |
alaQcnConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.71.1.1.2 |
alcatelIND1QcnMIBConformanceBranch For QCN Subsystem Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.71.1.2 |
alcatelIND1QcnMIBGroupsBranch For QCN Subsystem Units Of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.71.1.2.1 |
alcatelIND1QcnMIBCompliancesBranch For QCN Subsystem Compliance Statements. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.71.1.2.2 |