ALCATEL-IND1-PIMSM-MIB
The ALCATEL-IND1-PIMSM-MIB enables the monitoring and configuration of Protocol Independent Multicast - Sparse Mode (PIM-SM) global parameters on Alcatel-Lucent networking hardware. It exposes specific metrics for PIM-SM interface states, neighbor adjacencies, and multicast routing table entries to facilitate protocol troubleshooting and policy enforcement.
Imported Objects
Objects
38 total| Object Name |
|---|
alcatelIND1PIMSMMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This proprietary MIB contains management information for
the configuration of PIM-SM global configuration parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.10.6.1 |
alcatelIND1PIMSMMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1 |
alaPimsmGlobalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1 |
alaPimsmAdminStatusAdministratively enables/disables the
PIM-SM protocol on this router.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.1 |
alaPimsmAdminBSRAddressThe IP address used to source the bootstrap message when
the router is configured to be a candidate bootstrap
router (C-BSR). This IP address should belong to a
PIM-enabled VLAN.rw IpAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.2 |
alaPimsmAdminBSRHashmasklenThe length (in bits) of the mask to use in the hash
function when computing the rendezvous point (RP) for a
multicast group. This value may be changed to facilitate
vendor inter-operability. For IPV4 we recommend a value
of 30.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.3 |
alaPimsmAdminBSRPriorityThe candidate bootstrap router's (C-BSR) priority. The
C-BSR with the biggest priority value will be elected
as the BSR for this domain.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.4 |
alaPimsmCRPExpiryTimeThe maximum time a PIM-SM router considers the current
candidate rendezvous point (C-RP) active.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.5 |
alaPimsmCRPIntervalThis is the interval at which the candidate rendezvous
point router's advertisements (C-RP-Adv) are sent
to the bootstrap router.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.6 |
alaPimsmAdminCRPAddressThe IP Address of the C-RP when this router is configured
to be a Candidate RP. This IP address should belong to
a PIM-enabled vlan. The value of 0 indicates that
this router is not configured to be a C-RP.rw IpAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.7 |
alaPimsmAdminCRPPriorityThe candidate rendezvous point (C-RP) router's
priority. A lower numeric value denotes a higher
priority.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.8 |
alaPimsmDataTimeoutThis is the time after which (S,G) state for a
silent source will be deleted.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.9 |
alaPimsmMaxRPsThe maximum number of C-RPs allowed in the PIM-SM
domain.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.10 |
alaPimsmProbeTimeWhen NULL Registers are used, this is the time
between sending a NULL Register and the Register-
Suppression-Timer expiring unless it is restarted
by receiving a Register-Stop.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.11 |
alaPimsmOldRegisterMessageSupportSpecifies the application of the checksum function on
received Register messages in the PIM-SM domain. When
set to oldCisco(2), the checksum for a register message
is computed for the entire packet (i.e. includes data).
When set to latest(1), the checksum is done only on the
first 8 bytes of the packet. This variable is provided
for interoperability reasons and may be required for
Compatibility with older implementations of PIM-SM v2.
This parameter must be set the same throughout the
PIM-SM domain.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.12 |
alaPimsmRegisterSuppressionTimeoutThis is the amount of time a Designated Router (DR) will
stop sending Registers on behalf of sources to the RP
once a Register-Stop has been received.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.1.13 |
alaPimsmDebugConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2 |
alaPimsmDebugLevelSets the level of Debugging for the PIM-SM Protocol
on this router. A level of 0 indicates no debugging.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.1 |
alaPimsmDebugErrorAdministratively enables/disables debugging for PIMSM
Error messages if the alaPimsmDebugLevel is greater
than 0.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.2 |
alaPimsmDebugHelloAdministratively enables/disables debugging for PIMSM
Hello messages if the alaPimsmDebugLevel is greater
than 0.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.3 |
alaPimsmDebugNbrAdministratively enables/disables debugging for PIMSM
Neighbor processing if the alaPimsmDebugLevel is greater
than 0.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.4 |
alaPimsmDebugBootstrapAdministratively enables/disables debugging for PIMSM
Bootstrap processing if the alaPimsmDebugLevel is greater
than 0.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.5 |
alaPimsmDebugCRPAdministratively enables/disables debugging for PIMSM
CRP processing if the alaPimsmDebugLevel is greater
than 0.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.6 |
alaPimsmDebugRouteAdministratively enables/disables debugging for PIMSM
Route processing if the alaPimsmDebugLevel is greater
than 0.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.7 |
alaPimsmDebugJoinPruneAdministratively enables/disables debugging for PIMSM
Join/Prune processing if the alaPimsmDebugLevel is greater
than 0.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.8 |
alaPimsmDebugAssertAdministratively enables/disables debugging for PIMSM
Assert processing if the alaPimsmDebugLevel is greater
than 0.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.9 |
alaPimsmDebugTimeAdministratively enables/disables debugging for PIMSM
Timer processing if the alaPimsmDebugLevel is greater
than 0.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.10 |
alaPimsmDebugIgmpAdministratively enables/disables debugging for PIMSM
Igmp processing if the alaPimsmDebugLevel is greater
than 0.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.11 |
alaPimsmDebugSptAdministratively enables/disables debugging for PIMSM
SPT processing if the alaPimsmDebugLevel is greater
than 0.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.12 |
alaPimsmDebugMipAdministratively enables/disables debugging for PIMSM
MIP processing (including CLI/SNMP) if the
alaPimsmDebugLevel is greater than 0.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.13 |
alaPimsmDebugInitAdministratively enables/disables debugging for PIMSM
Initialization processing if the alaPimsmDebugLevel
is greater than 0.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.14 |
alaPimsmDebugTmAdministratively enables/disables debugging for PIMSM
Task Manager interaction if the alaPimsmDebugLevel
is greater than 0.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.15 |
alaPimsmDebugIpmrmAdministratively enables/disables debugging for PIMSM
IPMRM interaction if the alaPimsmDebugLevel is
greater than 0.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.16 |
alaPimsmDebugMiscAdministratively enables/disables miscellaneous debugging of
PIMSM if the alaPimsmDebugLevel is greater than 0.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.17 |
alaPimsmDebugAllAdministratively enables/disables all debugging of
PIMSM if the alaPimsmDebugLevel is greater than 0.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.1.2.18 |
alcatelIND1PIMSMMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2 |
alcatelIND1PIMSMMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.1 |
alcatelIND1PIMSMMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.6.1.2.2 |
More MIBs from AL-Enterprise
Browse all AL-EnterpriseMIBs →The ALCATEL-IND1-QOS-MIB enables monitoring and configuration of Quality of Service (QoS) policies, traffic shaping parameters, and access control list (ACL) filtering rules on Alcatel-Lucent network infrastructure. It provides visibility into queue depths, packet discard rates, and bandwidth allocation statistics to enforce service level agreements and traffic prioritization.
The ALCATEL-IND1-SERVICE-MGR-MIB provides configuration parameters for the Alcatel-Lucent service manager feature, enabling the management of service provisioning, activation, and lifecycle states on carrier-grade network elements. This module facilitates the monitoring of service instance attributes and operational status to ensure correct delivery of managed services across the infrastructure.
The ALCATEL-IND1-FIPS-MIB module enables SNMP-based monitoring of MAC address learning tables and forwarding database states on Alcatel-Lucent Birds of Prey series network switches. It provides enterprise-specific access to layer 2 switching metrics, including learned MAC addresses and their associated port bindings, for traffic analysis and security auditing.
The ALCATEL-IND1-BGP-MIB enables SNMP-based monitoring and configuration of Border Gateway Protocol (BGP) parameters on Alcatel-Lucent network devices, specifically tracking BGP session states, neighbor relationships, and protocol-specific counters. This module provides visibility into the operational status and performance metrics of BGP routing processes to facilitate network troubleshooting and policy enforcement.
The ALCATEL-IND1-DEVICES MIB defines SNMP Object Identifiers for monitoring the physical inventory, chassis status, and module states of Alcatel-Lucent OmniSwitch 4000, 7000, 8000, and 9000 series networking hardware. It enables network management systems to retrieve device topology data, component presence, and hardware health indicators specific to these enterprise switching platforms.
The ALCATEL-IND1-AAA-MIB provides SNMP access to monitor and manage Authentication, Authorization, and Accounting (AAA) subsystem metrics on Alcatel-Lucent "Birds of Prey" network hardware, specifically tracking user session states, authentication failures, and accounting records.