ALCATEL-IND1-PIM-BSR-MIB
AI MIB Summary
The ALCATEL-IND1-PIM-BSR-MIB enables monitoring and management of the Bootstrap Router (BSR) mechanism within Alcatel-Lucent PIM-SM and PIM-DM multicast routing instances, specifically exposing BSR state variables, candidate router configurations, and election timers to facilitate multicast domain stability verification.
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB):
This proprietary MIB contains management information for the Bootstrap Router (BSR) mechanism for PIM routers. This MIB is based on the Internet Draft <draft-ietf-pim-bsr-mib-02.txt> developed by the IETF PIM Working Group.
The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alaPimBsrMIB.1.3.6.1.4.1.6486.801.1.2.1.10.6.3
46
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
46 total| Object Name |
|---|
alaPimBsrMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This proprietary MIB contains management information for
the Bootstrap Router (BSR) mechanism for PIM routers.
This MIB is based on the Internet Draft
<draft-ietf-pim-bsr-mib-02.txt> developed by
the IETF PIM Working Group.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.10.6.3 |
alaPimBsrNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.0 |
alaPimBsrElectedBSRLostElectionA alaPimBsrElectedBSRLostElection trap should be generated
when current E-BSR lost election to a new Candidate
BSR
current E-BSR, start sending BootStrap Messages. Only
an E-BSR should generate this trap.
This notification is generated when
alaPimBsrCandidateBSRElectedBSR becomes FALSE. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.0.1 |
alaPimBsrCandidateBSRWinElectionA alaPimBsrCandidateBSRWinElection trap should be generated
when a C-BSR wins BSR Election. Only an E-BSR should
generate this trap.
This notification is generated when
alaPimBsrCandidateBSRElectedBSR becomes TRUE NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.0.2 |
alaPimBsrObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1 |
alaPimBsrCandidateRPTableThe (conceptual) table listing the IP multicast group
prefixes for which the local router is to advertise
itself as a Candidate-RP. SEQUENCE OF AlaPimBsrCandidateRPEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1 |
alaPimBsrCandidateRPEntryAn entry (conceptual row) in the alaBsrCandidateRPTable. AlaPimBsrCandidateRPEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1 |
alaPimBsrCandidateRPAddressTypeThe Inet address type of the Candidate-RP. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.1 |
alaPimBsrCandidateRPAddressThe (unicast) address which will be advertised as a
Candidate-RP. The InetAddressType is given by the
alaPimBsrCandidateRPAddressType object. InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.2 |
alaPimBsrCandidateRPGroupAddressThe IP multicast group address which, when combined with
the corresponding value of
alaPimBsrCandidateRPGroupPrefixLength, identifies a group
prefix for which the local router will advertise itself
as a Candidate-RP. The InetAddressType is given by the
alaPimBsrCandidateRPAddressType object. InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.3 |
alaPimBsrCandidateRPGroupPrefixLengthThe multicast group address mask which, when combined
with the corresponding value of
alaPimBsrCandidateRPGroupAddress, identifies a group prefix
for which the local router will advertise itself as a
Candidate-RP. The InetAddressType is given by the
alaPimBsrCandidateRPAddressType object. InetAddressPrefixLength .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.4 |
alaPimBsrCandidateRPBidirIf this object is set to TRUE, this group range is
advertised with this RP as a BIDIR-PIM group range. If
it is set to FALSE, it is advertised as a PIM-SM group
range.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.5 |
alaPimBsrCandidateRPAdvTimerThe time remaining before the local router next sends
a Candidate-RP-Advertisement to the elected BSR for
this address type.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.6 |
alaPimBsrCandidateRPPriorityThe priority for this Candidate RP advertised in
Candidate-RP-Advertisements.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.7 |
alaPimBsrCandidateRPAdvIntervalA Candidate RP generates Candidate-RP-Advertisements
periodically. This object represents the time interval
in seconds between two consecutive advertisements.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.8 |
alaPimBsrCandidateRPHoldtimeHoldtime for this Candidate RP. The amount of time (in
seconds) this Candidate-RP entry is valid.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.9 |
alaPimBsrCandidateRPStatusThe status of this row, by which new entries may be
created, or old entries deleted from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.1.1.10 |
alaPimBsrElectedBSRRPSetTableThe (conceptual) table listing BSR-specific information
about PIM group mappings learned via C-RP advertisements
or created locally using configurations. This table is
maintained only on the Elected BSR.
An Elected BSR uses this table to create Bootstrap
Messages after applying a local policy to include some
or all of the group mappings in this table. SEQUENCE OF AlaPimBsrElectedBSRRPSetEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2 |
alaPimBsrElectedBSRRPSetEntryAn entry (conceptual row) in the
alaPimBsrElectedBSRRPSetTable. AlaPimBsrElectedBSRRPSetEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2.1 |
alaPimBsrElectedBSRGrpMappingAddrTypeThe Inet address type of the IP multicast group
prefix. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2.1.2 |
alaPimBsrElectedBSRGrpMappingGrpAddrThe IP multicast group address which, when combined
with alaPimBsrElectedBSRGrpMappingGrpPrefixLen, gives the
group prefix for this mapping. The InetAddressType is
given by the alaPimBsrElectedBSRGrpMappingAddrType object.
This address object is only significant up to
alaPimBsrElectedBSRGrpMappingGrpPrefixLen bits. The
remainder of the address bits are zero. This is
especially important for this field, which is part of
the index of this entry. Any non-zero bits would
signify an entirely different entry. InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2.1.3 |
alaPimBsrElectedBSRGrpMappingGrpPrefixLenThe multicast group prefix length that, when combined
with alaPimBsrElectedBSRGrpMappingGrpAddr, gives the group
prefix for this mapping. The InetAddressType is given by
the alaPimBsrElectedBSRGrpMappingAddrType object. If
alaPimBsrElectedBSRGrpMappingAddrType is 'ipv4' or 'ipv4z',
this object must be in the range 4..32. If
alaPimBsrElectedBSRGrpMappingAddrType is 'ipv6' or 'ipv6z',
this object must be in the range 8..128. InetAddressPrefixLength .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2.1.4 |
alaPimBsrElectedBSRGrpMappingRPAddrThe IP address of the RP to be used for groups within
this group prefix. The InetAddressType is given by the
alaPimBsrElectedBSRGrpMappingAddrType object. InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2.1.5 |
alaPimBsrElectedBSRRPSetPriorityThe priority for RP. Numerically higher values for
this object indicate lower priorities, with the value
zero denoting the highest priority.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2.1.6 |
alaPimBsrElectedBSRRPSetHoldtimeThe holdtime for RPro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2.1.7 |
alaPimBsrElectedBSRRPSetExpiryTimeThe minimum time remaining before this entry will be
aged out. The value zero indicates that this entry will
never be aged out.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2.1.8 |
alaPimBsrElectedBSRRPSetGrpBidirIf this object is TRUE, this group range with this
RP is a BIDIR-PIM group range. If it is set to FALSE,
it is a PIM-SM group range.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.2.1.9 |
alaPimBsrCandidateBSRTableThe (conceptual) table containing Candidate-BSR
configuration for the local router. The table contains
one row for each address family for which the local
router is to advertise itself as a Candidate-BSR. SEQUENCE OF AlaPimBsrCandidateBSREntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.3 |
alaPimBsrCandidateBSREntryAn entry (conceptual row) in the alaPimBsrCandidateBSRTable. AlaPimBsrCandidateBSREntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.3.1 |
alaPimBsrCandidateBSRAddressTypeThe address type of the Candidate-BSR. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.3.1.1 |
alaPimBsrCandidateBSRAddressThe (unicast) address which the local router will
use to advertise itself as a Candidate-BSR. The
InetAddressType is given by the
alaPimBsrCandidateBSRAddressType object.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.3.1.2 |
alaPimBsrCandidateBSRPriorityThe priority value for the local router as a
Candidate-BSR for this address type. Numerically higher
values for this object indicate higher priorities.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.3.1.3 |
alaPimBsrCandidateBSRHashMaskLengthThe hash mask length (used in the RP hash function)
that the local router will advertise in its Bootstrap
messages for this address type. This object defaults
to 30 if alaPimBsrCandidateBSRAddressType is 'ipv4' or 'ipv4z'
, and defaults to 126 if alaPimBsrCandidateBSRAddressType is
'ipv6' or 'ipv6z'.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.3.1.4 |
alaPimBsrCandidateBSRElectedBSRWhether the local router is the elected BSR for this
address type.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.3.1.5 |
alaPimBsrCandidateBSRBootstrapTimerThe time remaining before the local router next
originates a Bootstrap message for this address type.
Value of this object is zero if
alaPimBsrCandidateBSRElectedBSR is 'FALSE'.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.3.1.6 |
alaPimBsrCandidateBSRStatusThe status of this row, by which new entries may
be created, or old entries deleted from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.3.1.7 |
alaPimBsrElectedBSRTableThe (conceptual) table containing information about
elected BSRs. The table contains one row for each
address family for which there is an elected BSR. SEQUENCE OF AlaPimBsrElectedBSREntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.4 |
alaPimBsrElectedBSREntryAn entry (conceptual row) in the alaPimBsrElectedBSRTable. AlaPimBsrElectedBSREntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.4.1 |
alaPimBsrElectedBSRAddressTypeThe address type of the elected BSR. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.4.1.1 |
alaPimBsrElectedBSRAddressThe (unicast) address of the elected BSR. The
InetAddressType is given by the alaPimBsrElectedBSRAddressType
object.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.4.1.2 |
alaPimBsrElectedBSRPriorityThe priority value for the elected BSR for this address
type. Numerically higher values for this object indicate
higher priorities.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.4.1.3 |
alaPimBsrElectedBSRHashMaskLengthThe hash mask length (used in the RP hash function)
advertised by the elected BSR for this address type.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.4.1.4 |
alaPimBsrElectedBSRExpiryTimeThe minimum time remaining before the elected BSR for
this address type will be declared down.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.1.4.1.5 |
alaPimBsrConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.2 |
alaPimBsrCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.2.1 |
alaPimBsrGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.6.3.2.2 |