ALCATEL-IND1-PCAM-MIB
The ALCATEL-IND1-PCAM-MIB provides SNMP management interfaces for the Coronado Layer 3 Hardware Routing Engine (HRE), enabling monitoring of routing engine status, interface states, and hardware resource utilization on Alcatel-Lucent (formerly Alcatel Internetworking) Coronado series routers.
Imported Objects
Objects
46 total| Object Name |
|---|
alcatelIND1PCAMMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This MIB contains management information for Coronado Layer
3 Hardware Routing Engine (HRE) management.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.1.1.4.1 |
alcatelIND1PCAMMIBObjectsBranch for Coronado Layer 3 HRE Managed Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.1.1.4.1.1 |
alaCoroL3HrePerModeTableThe statistics and configurable data for a Coronado L3 HRE mode. SEQUENCE OF CoroL3HrePerModeEntry .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1 |
alaCoroL3HrePerModeTableEntryEach entry corresponds to a single mode for a single Coronado. CoroL3HrePerModeEntry .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1 |
alaCoroL3HrePerModeSlotNumberThe slot number in which the Coronado resides. Valid range
will vary depending on hardware configuration.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1.1 |
alaCoroL3HrePerModeSliceNumberThe slice number in which the Coronado resides. Valid range
will vary depending on hardware configuration.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1.2 |
alaCoroL3HrePerModeModeNumberIdentifier for L3 HRE mode. Note that mode 3 refers to
data used for modes 3 through 5 since they share hash
function and memory space.ro INTEGER .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1.3 |
alaCoroL3HreModeHashTableSizeNumber of hash buckets to be used for this mode. This must
be 0 or a power of 2.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1.4 |
alaCoroL3HreModeHashEntriesInUseNumber of hash buckets currently in use for this mode.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1.5 |
alaCoroL3HreModeCollEntriesInUseNumber of collision entries in use by this mode.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1.6 |
alaCoroL3HreModeCurrentHashFunctionCurrent hash function in use by this mode.ro CoroL3HashFunction .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1.7 |
alaCoroL3HreMaxCollChainLenMaximum length for the collision chains in this mode.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1.8 |
alaCoroL3HreAvgCollChainLenAverage length for the collision chains in this mode.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.1.1.9 |
alaCoroL3HrePerCoronadoStatsTableThe statistics for a Coronado L3 HRE. SEQUENCE OF CoroL3HrePerCoronadoStatsEntry .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2 |
alaCoroL3HrePerCoronadoStatsTableEntryEach entry corresponds to a single Coronado. CoroL3HrePerCoronadoStatsEntry .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1 |
alaCoroL3HreSlotNumberThe slot number in which the Coronado resides. Valid range
will vary depending on hardware configuration.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.1 |
alaCoroL3HreSliceNumberThe slice number in which the Coronado resides. Valid range
will vary depending on hardware configuration.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.2 |
alaCoroL3HreRouteCacheEntriesTotalTotal number of configured route cache entries.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.3 |
alaCoroL3HreRouteCacheEntriesInUseNumber of route cache entries currently in-use.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.4 |
alaCoroL3HreIpPacketsReceivedNumber of IP packets received.ro Counter64 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.5 |
alaCoroL3HreIpBytesReceivedNumber of IP bytes received.ro Counter64 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.6 |
alaCoroL3HreIpPacketsForwardedNumber of IP packets routed.ro Counter64 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.7 |
alaCoroL3HreIpBytesForwardedNumber of IP bytes routed.ro Counter64 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.8 |
alaCoroL3HreIpPacketsDiscardedNumber of IP packets discarded.ro Counter64 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.9 |
alaCoroL3HreIpBytesDiscardedNumber of IP bytes discarded.ro Counter64 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.10 |
alaCoroL3HreIpPacketsFragmentedNumber of IP packets fragmented.ro Counter64 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.11 |
alaCoroL3HreIpPacketsFragsGeneratedNumber of IP packet fragments generated.ro Counter64 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.12 |
alaCoroL3HreIpPacketsFailedToFragNumber of IP packets that could not be fragmented
because IP flag precluded it.ro Counter64 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.13 |
alaCoroL3HreIpxPacketsReceivedNumber of IPX packets received.ro Counter64 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.14 |
alaCoroL3HreIpxBytesReceivedNumber of IPX bytes received.ro Counter64 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.15 |
alaCoroL3HreIpxPacketsForwardedNumber of IPX packets routed.ro Counter64 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.16 |
alaCoroL3HreIpxBytesForwardedNumber of IPX bytes routed.ro Counter64 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.17 |
alaCoroL3HreIpxPacketsDiscardedNumber of IPX packets discarded.ro Counter64 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.18 |
alaCoroL3HreIpxBytesDiscardedNumber of IPX bytes discarded.ro Counter64 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.2.1.19 |
alaCoroL3HreUpdateChangesUpdating this object causes the change list to either be applied
cleared.rw Enumeration .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.3 |
alaCoroL3HreChangeTableThe statistics and configurable data for a Coronado L3 HRE mode. SEQUENCE OF CoroL3HreChangeEntry .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.4 |
alaCoroL3HreChangeTableEntryEach entry corresponds to a single mode for a single Coronado. CoroL3HreChangeEntry .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.4.1 |
alaCoroL3HreChangeSlotNumberThe slot number in which the Coronado resides. Valid range
will vary depending on hardware configuration.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.4.1.1 |
alaCoroL3HreChangeSliceNumberThe slice number in which the Coronado resides. Valid range
will vary depending on hardware configuration.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.4.1.2 |
alaCoroL3HreChangeModeNumberIdentifier for L3 HRE mode. Note that mode 3 refers to
data used for modes 3 through 5 since they share hash
function and memory space.ro INTEGER .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.4.1.3 |
alaCoroL3HreChangeHashTableSizeNumber of hash buckets to be used for this mode. This must
be 0 or a power of 2.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.4.1.4 |
alaCoroL3HreChangeHashFunctionHash function to be used for this mode.rw CoroL3HashFunction .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.4.1.5 |
alaCoroL3HreChangeClearClears changes for the specified mode.rw Enumeration .1.3.6.1.4.1.6486.801.1.1.1.4.1.1.4.1.6 |
alcatelIND1PCAMMIBConformanceBranch for Coronado Layer 3 HRE Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.1.1.4.1.2 |
alcatelIND1PCAMMIBGroupsBranch for Coronado Layer 3 HRE Units of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.1.1.4.1.2.1 |
alcatelIND1PCAMMIBCompliancesBranch for Coronado Layer 3 HRE Compliance Statements. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.1.1.4.1.2.2 |
More MIBs from AL-Enterprise
Browse all AL-EnterpriseMIBs →The ALCATEL-IND1-QOS-MIB enables monitoring and configuration of Quality of Service (QoS) policies, traffic shaping parameters, and access control list (ACL) filtering rules on Alcatel-Lucent network infrastructure. It provides visibility into queue depths, packet discard rates, and bandwidth allocation statistics to enforce service level agreements and traffic prioritization.
The ALCATEL-IND1-SERVICE-MGR-MIB provides configuration parameters for the Alcatel-Lucent service manager feature, enabling the management of service provisioning, activation, and lifecycle states on carrier-grade network elements. This module facilitates the monitoring of service instance attributes and operational status to ensure correct delivery of managed services across the infrastructure.
The ALCATEL-IND1-FIPS-MIB module enables SNMP-based monitoring of MAC address learning tables and forwarding database states on Alcatel-Lucent Birds of Prey series network switches. It provides enterprise-specific access to layer 2 switching metrics, including learned MAC addresses and their associated port bindings, for traffic analysis and security auditing.
The ALCATEL-IND1-BGP-MIB enables SNMP-based monitoring and configuration of Border Gateway Protocol (BGP) parameters on Alcatel-Lucent network devices, specifically tracking BGP session states, neighbor relationships, and protocol-specific counters. This module provides visibility into the operational status and performance metrics of BGP routing processes to facilitate network troubleshooting and policy enforcement.
The ALCATEL-IND1-DEVICES MIB defines SNMP Object Identifiers for monitoring the physical inventory, chassis status, and module states of Alcatel-Lucent OmniSwitch 4000, 7000, 8000, and 9000 series networking hardware. It enables network management systems to retrieve device topology data, component presence, and hardware health indicators specific to these enterprise switching platforms.
The ALCATEL-IND1-AAA-MIB provides SNMP access to monitor and manage Authentication, Authorization, and Accounting (AAA) subsystem metrics on Alcatel-Lucent "Birds of Prey" network hardware, specifically tracking user session states, authentication failures, and accounting records.