ALCATEL-IND1-OPENFLOW-MIB
The ALCATEL-IND1-OPENFLOW-MIB enables SNMP-based monitoring and configuration of OpenFlow protocol states, flow table entries, and controller connectivity specifically for the Alcatel-Lucent OS6900 switch product line. It facilitates the retrieval of vendor-specific OpenFlow counters and status indicators required for managing Software-Defined Networking (SDN) traffic forwarding on these devices.
Imported Objects
Objects
36 total| Object Name |
|---|
alcatelIND1OpenflowMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
Openflow for OS6900 Product Line.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.77.1 |
alcatelIND1OpenflowMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.77.1.0 |
alcatelIND1OpenflowMIBObjectsAlcatel-Lucent Openflow Managed Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.77.1.1 |
alaOpenflowGlobalConfigObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.1 |
alaOpenflowGlobalBackoffMaxAlcatel-Lucent Openflow maximum back-off time in seconds for controller connection attempts.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.1.1 |
alaOpenflowGlobalIdleProbeTimeoutAlcatel-Lucent Openflow idle probe timeout value in seconds. If set to 0, idle probing is disabled.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.1.2 |
alaOpenflowLogicalSwitchTableThis table contains one row for each Logical Switch. SEQUENCE OF AlaOpenflowLogicalSwitchEntry .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2 |
alaOpenflowLogicalSwitchEntryInformation about the Openflow Logical Switches. AlaOpenflowLogicalSwitchEntry .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1 |
alaOpenflowLogicalSwitchOpenflow Logical Switch Name. SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.1 |
alaOpenflowLogicalSwitchAdminStateLogical Switch Admin State. Enable or disable the Logical Switch.
When disabled, all controllers for the Logical Switch will be
operationally disabled and flows added by those controllers will
be removed.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.2 |
alaOpenflowLogicalSwitchModeOpenflow Logical Switch Mode. Normal is regular Openflow,
API is for ACL-like flow operation. Only one Logical Switch
can be in api mode at a time. This object cannot be modified
after the Logical Switch has been created.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.3 |
alaOpenflowLogicalSwitchVersionsOpenflow Logical Switch Bitmap of enabled Openflow versions.
At least one version must be enabled.rw Bits .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.4 |
alaOpenflowLogicalSwitchVlanOpenflow Logical Switch VLAN. The value 0 indicates that no
VLAN has been specified, it is not a valid value to write.
This object is not valid to write when creating/modifying an
entry with alaOpenflowLogicalSwitchMode api(2)rw Integer32 (0|2..4093) .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.5 |
alaOpenflowLogicalSwitchControllerCountCount of the configured controllers for the Logical Switch.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.6 |
alaOpenflowLogicalSwitchInterfaceCountCount of the configured interfaces (ports and link aggregations) for the Logical Switch.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.7 |
alaOpenflowLogicalSwitchFlowCountCount of the flows pushed to the Logical Switch by its controllers.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.8 |
alaOpenflowLogicalSwitchRowStatusDeleting a row from this table will also remove associated entries from other tables in this mib
that have a logical switch as part of their index.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.9 |
alaOpenflowControllerTableThis table contains one row for each controller on each logical switch.
Currently, up to three controllers per logical switch are supported per logical switch. SEQUENCE OF AlaOpenflowControllerEntry .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3 |
alaOpenflowControllerEntryInformation about the Openflow Controllers attached to Logical Switches. AlaOpenflowControllerEntry .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1 |
alaOpenflowControllerLogicalSwitchOpenflow Logical Switch Name. SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.1 |
alaOpenflowControllerIpTypeOpenflow Controller IP Address Type. The only type currently supported is ipv4(1) InetAddressType(1) .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.2 |
alaOpenflowControllerIpOpenflow Controller IP Address. As specified by alaOpenflowControllerIpType,
only ipv4 is currently supported InetAddress .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.3 |
alaOpenflowControllerPortOpenflow Controller Port. Integer32 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.4 |
alaOpenflowControllerRoleRole of the Controller for the Logical Switch. The role is negotiated by the
controllers and the switch is notified of the outcome (1.3.1+). 1.0 controllers
will always have the role of equal. Only one controller per Logical Switch
can have the role of master.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.5 |
alaOpenflowControllerAdminStateController Admin State. Enable or disable connection to the controller.
The Logical Switch runs in 'Fail Secure Mode' so all flow aging, etc
continues unaffected when the controller is administratively disabled.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.6 |
alaOpenflowControllerOperStateState of the Logical Switch connection to the Controller.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.7 |
alaOpenflowControllerRowStatusOn create, if the specified logical switch does not exist in alaOpenflowLogicalSwitchTable,
an entry will be created in that table. Delete does not effect alaOpenflowLogicalSwitchTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.8 |
alaOpenflowInterfaceTableThis table contains one row for each interface (port or link aggregation) assigned to
a logical switch. An interface can only belong to one logical switch at a time.
If a logical switch in API mode exists, interfaces cannot be manually added to/deleted from it;
instead, interfaces default to the API mode logical switch when not assigned to another Logical Switch.
Interfaces can be reassigned from the API mode logical switch to a normal mode logical switch
(by adding it to that normal mode logical switch) but not directly reassigned from one normal mode
logical switch to another normal mode logical switch. SEQUENCE OF AlaOpenflowInterfaceEntry .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4 |
alaOpenflowInterfaceEntryInformation about the interfaces assigned to Openflow Logical Switches. AlaOpenflowInterfaceEntry .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1 |
alaOpenflowInterfaceLogicalSwitchOpenflow Logical Switch Name. SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.1 |
alaOpenflowInterfaceOpenflow Interface attached to a Logical Switch. Port values are dot1dBasePort values,
Link Aggregations start at 32769. Integer32 .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.2 |
alaOpenflowInterfaceModeOpenflow Interface Mode. Normal is regular Openflow,
API is for ACL like flow operation.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.3 |
alaOpenflowInterfaceRowStatusOn create, if the specified logical switch does not exist in alaOpenflowLogicalSwitchTable,
an entry will be created in that table. Delete does not effect alaOpenflowLogicalSwitchTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.4 |
alcatelIND1OpenflowMIBConformanceAlcatel-Lucent Openflow Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.77.1.2 |
alcatelIND1OpenflowMIBGroupsBranch For ALU Openflow MIB Subsystem Units Of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.77.1.2.1 |
alcatelIND1OpenflowMIBCompliancesBranch For ALU Openflow MIB Subsystem Compliance Statements. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.77.1.2.2 |
More MIBs from AL-Enterprise
Browse all AL-EnterpriseMIBs →The ALCATEL-IND1-QOS-MIB enables monitoring and configuration of Quality of Service (QoS) policies, traffic shaping parameters, and access control list (ACL) filtering rules on Alcatel-Lucent network infrastructure. It provides visibility into queue depths, packet discard rates, and bandwidth allocation statistics to enforce service level agreements and traffic prioritization.
The ALCATEL-IND1-SERVICE-MGR-MIB provides configuration parameters for the Alcatel-Lucent service manager feature, enabling the management of service provisioning, activation, and lifecycle states on carrier-grade network elements. This module facilitates the monitoring of service instance attributes and operational status to ensure correct delivery of managed services across the infrastructure.
The ALCATEL-IND1-FIPS-MIB module enables SNMP-based monitoring of MAC address learning tables and forwarding database states on Alcatel-Lucent Birds of Prey series network switches. It provides enterprise-specific access to layer 2 switching metrics, including learned MAC addresses and their associated port bindings, for traffic analysis and security auditing.
The ALCATEL-IND1-BGP-MIB enables SNMP-based monitoring and configuration of Border Gateway Protocol (BGP) parameters on Alcatel-Lucent network devices, specifically tracking BGP session states, neighbor relationships, and protocol-specific counters. This module provides visibility into the operational status and performance metrics of BGP routing processes to facilitate network troubleshooting and policy enforcement.
The ALCATEL-IND1-DEVICES MIB defines SNMP Object Identifiers for monitoring the physical inventory, chassis status, and module states of Alcatel-Lucent OmniSwitch 4000, 7000, 8000, and 9000 series networking hardware. It enables network management systems to retrieve device topology data, component presence, and hardware health indicators specific to these enterprise switching platforms.
The ALCATEL-IND1-AAA-MIB provides SNMP access to monitor and manage Authentication, Authorization, and Accounting (AAA) subsystem metrics on Alcatel-Lucent "Birds of Prey" network hardware, specifically tracking user session states, authentication failures, and accounting records.