Home/Catalog/ALCATEL-IND1-NTP-MIB

ALCATEL-IND1-NTP-MIB

AI MIB Summary

The ALCATEL-IND1-NTP-MIB enables SNMP-based monitoring and configuration of Network Time Protocol (NTP) services on Alcatel-Lucent network devices, specifically exposing NTP peer associations, stratum levels, synchronization status, and clock offset metrics.

This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Propietary NTP MIB definitions The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1NTPMIB.1.3.6.1.4.1.6486.801.1.2.1.26.1
175
Objects
Active
Status
5
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-TC
SNMPv2-CONF
INET-ADDRESS-MIB
ALCATEL-IND1-BASE

Objects

175 total
Object Name
alcatelIND1NTPMIBThis module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Propietary NTP MIB definitions The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY
.1.3.6.1.4.1.6486.801.1.2.1.26.1
alcatelIND1NTPMIBObjectsBranch For NTP Subsystem Managed Objects.
OBJECT IDENTIFIER
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1
alaNtpConfig
OBJECT IDENTIFIER
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1
alaNtpEnableEnables/disables NTP clock discipline.rw
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.1
alaNtpMonitorEnableEnables/disables NTP monitor.rw
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.2
alaNtpBroadcastEnableEnables/disables NTP broadcast client.rw
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.3
alaNtpPeerTableTable containing the synchronization host this switch will be associated with.
SEQUENCE OF NtpPeerEntry
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4
alaNtpPeerEntryEach entry corresponds to a synchronization host.
NtpPeerEntry
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1
alaNtpPeerAddressTypeThe InetAddress type of the synchronization host. Only types InetAddressIPv4 (1) and InetAddressDNS (16) are supported.
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.1
alaNtpPeerAddressThe InetAddress of the synchronization host.
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.2
alaNtpPeerIpAddressThe IP address of the synchronization host derrived from the InetAddress.ro
IpAddress
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.3
alaNtpPeerTypeType of synchronization host that will communicate with this switch.rw
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.4
alaNtpPeerAuthThe authorization keyid for the remote host.rw
INTEGER ( 0 .. 65535 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.5
alaNtpPeerVersionThe NTP version to communicate with the remote host.rw
INTEGER ( 1 .. 255 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.6
alaNtpPeerMinpollThe minimum poll duration to the remote host. This value is a power of 2 seconds when the poll will occur. For example, 4 (2 to the power 4) is 16 seconds. The maximum poll value is 10.rw
INTEGER ( 4 .. 10 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.7
alaNtpPeerPreferMarks the host as a preferred connection.rw
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.8
alaNtpPeerAdminUsed in accordance to installation and removal conventions for conceptual rows. The RowStatus values that are supported are the following: active(1) - The row is active and valid. createAndGo(4) - The row will be created and activated. destroy(6) - The row will be destroyed.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.9
alaNtpPeerNameThe DNS name for the peer association derrived from the InetAddress.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.10
alaNtpPeerStratumThe stratum level of the remote peer. If this number is 16, the remote peer has not been synchronized. This parameter can only be set with a LOCALCLOCK server.rw
INTEGER ( 1 .. 16 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.4.1.11
alaNtpAuthDelayThis field sets a specified time interval that is added to timestamps included in requests to the server that required authentication. Typically this delay is needed in cases of long delay paths, or servers whose clocks are unsynchronized. Value is in milli-secondsrw
INTEGER ( 0 .. 65535 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.5
alaNtpBroadcastDelayThis field sets a specified time interval that is added to timestamps included in messages from broadcast servers. Value is in milli-secondsrw
INTEGER ( 0 .. 65535 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.6
alaNtpKeysFileName of the file which has the authorization keys.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.7
alaNtpConfigReqKeyIdRequest messages ask for information from the NTP entity such as timestamp information, statistics, etc. This changes the authentication key identifier for request messages sent from the switch to another NTP entity.rw
INTEGER ( 0 .. 65535 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.8
alaNtpConfigCtlKeyIdControl messages attempt to change the configuration of the NTP entity in some fashion. This changes the authentication key identifier for control messages sent from the switch to another NTP entity.rw
INTEGER ( 0 .. 65535 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.9
alaNtpConfigCfgKeyIdConfiguration messages changes information on the NTP entity.rw
INTEGER ( 0 .. 65535 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.10
alaNtpPrecisionThis sets the server's advertised precision.rw
INTEGER( -20..-1 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.11
alaNtpPeerTestsEnables/disable NTP peer synchronization tests. Disabling peer tests allows the NTP client to synchonize with servers that are themselves unsynchronized or would otherwise be eliminated by other time source tests.rw
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.12
alaNtpSysStratumThe stratum level of the local server. If this number is 16 it indicates that the switch is not synchronized. This helps the clients to select clocks with lower stratum numberrw
Integer32 ( 2 .. 16 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.13
alaNtpMaxAssociationThe maximum number of peer and client associations that the switch will serve. This helps ensure that the switch isn't overwhelmed by huge numbers of NTP synchronization requestsrw
Integer32 ( 0 .. 64 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.14
alaNtpAuthenticateEnable/Disable authentication of the NTP requests on the switchrw
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.1.15
alaNtpInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2
alaNtpPeerListTableUsed to display a brief list of all NTP associations related to this switch (servers, peers, etc.).
SEQUENCE OF NtpPeerListEntry
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1
alaNtpPeerListEntryEach entry corresponds to one association.
NtpPeerListEntry
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1
alaNtpPeerListAddressTypeThe InetAddress type of the synchronization host. InetAddressIPv4 (1) is the only type currently supported.
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.1
alaNtpPeerListAddressThe InetAddress of the association.
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.2
alaNtpPeerListIpAddressThe IP address of the association.ro
IpAddress
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.3
alaNtpPeerListLocalThe local interface address assigned by NTP to the remote association. If this address is 0.0.0.0, then the local address has yet to be determined.ro
IpAddress
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.4
alaNtpPeerListStratumThe stratum level of the remote peer. If this number is 16, the remote peer has not been synchronized.ro
INTEGER ( 1 .. 16 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.5
alaNtpPeerListPollThe polling interval, in seconds.ro
INTEGER ( 1 .. 65535 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.6
alaNtpPeerListReachThe reachability register of the remote association, in octal format. This number is determined by the NTP algorithm.ro
INTEGER ( 1 .. 255 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.7
alaNtpPeerListDelayThe currently estimated delay of this remote association, in seconds. This time is determined by the NTP algorithm.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.8
alaNtpPeerListOffsetThe currently estimated offset of this remote association, in seconds. This time is determined by the NTP algorithm.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.9
alaNtpPeerListDispersionThe currently estimated dispersion of this remote association, in seconds. This time is determined by the NTP algorithm.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.10
alaNtpPeerListSyncedIndicates that NTP is synchronized with this entity.ro
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.11
alaNtpPeerListNameThe DNS name for the peer association,ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.1.1.12
alaNtpPeerShowTableUsed to display a brief list of all NTP associations related to this switch (servers, peers, etc.).
SEQUENCE OF NtpPeerShowEntry
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3
alaNtpPeerShowEntryEach entry corresponds to one association.
NtpPeerShowEntry
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1
alaNtpPeerShowRemoteAddressTypeThe InetAddress type of the synchronization host. InetAddressIPv4 (1) is the only type currently supported.
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.1
alaNtpPeerShowRemoteAddressThe InetAddress of the remote association.
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.2
alaNtpPeerShowRemoteIpAddressThe IP address of the remote association.ro
IpAddress
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.3
alaNtpPeerShowLocalThe local interface address assigned by NTP to the remote associations.ro
IpAddress
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.4
alaNtpPeerShowHmodeThe host mode of this remote association.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.5
alaNtpPeerShowPmodeThe peer mode of this remote association.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.6
alaNtpPeerShowStratumThe stratum level of the remote peer.ro
INTEGER ( 1 .. 16 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.7
alaNtpPeerShowPrecisionThe advertised precision of this association, which is a number from -4 to -20.ro
INTEGER(-20..-4)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.8
alaNtpPeerShowLeapIndicatorThe status of leap second insertion for this association.ro
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.9
alaNtpPeerShowReferenceIdThis is a 32-bit code identifying the peers primary reference source. Normally an IP address.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.10
alaNtpPeerShowRootDistanceThis is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.11
alaNtpPeerShowRootDispersionThis is a signed fixed-point number indicating the maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.12
alaNtpPeerShowPpollThe poll time for this association when it is a peer.ro
INTEGER ( 0 .. 255 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.13
alaNtpPeerShowHpollThe poll time for this association when it is a host.ro
INTEGER ( 0 .. 255 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.14
alaNtpPeerShowKeyidThis is an integer identifying the cryptographic key used to generate the message authentication code.ro
INTEGER ( 0 .. 65535 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.15
alaNtpPeerShowVersionWhat version of NTP this association is using.ro
INTEGER ( 1 .. 255 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.16
alaNtpPeerShowAssociationThe number of seconds since this NTP entity was associated with the switch.ro
INTEGER ( 0 .. 65535 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.17
alaNtpPeerShowValidThis is an integer indicating the validity of current NTP system variables. The validity is made false if system variable are changed and a new peer sample under the changed configuration has not been received.ro
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.18
alaNtpPeerShowReachThis is a shift register used to determine the reachability status of this peer.ro
INTEGER ( 0 .. 255 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.19
alaNtpPeerShowUnreachThe number of times this NTP entity was unreachable.ro
INTEGER ( 0 .. 15 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.20
alaNtpPeerShowFlashThis bitmap reveals the state at the last grumble from the peer and are most handy for diagnosing problems. Duplicate packet: 0x0001 Bogus packet: 0x0002 Protocol unsynchronized: 0x0004 Access denied: 0x0008 Authentication failure: 0x0010 Peer clock unsynchronized: 0x0020 Peer stratum out: 0x0040 Root delay/dispersion bounds check: 0x0080 Peer delay dispersion bounds check: 0x0100 Autokey failed: 0x0200 Proventic not confirmed: 0x0400ro
INTEGER ( 0 .. 32767 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.21
alaNtpPeerShowBroadcastOffsetThe broadcast delay.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.22
alaNtpPeerShowTTLThis field displays the Time-to-Live (TTL) time in seconds and the mode (unicast, multicast, or broadcast) of NTP messages sent to a broadcast address.ro
INTEGER ( 0 .. 255 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.23
alaNtpPeerShowTimerThe time to next poll in seconds.ro
INTEGER ( 0 .. 2147483647 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.24
alaNtpPeerShowFlagsThis details which flags have been configured for this peer. Association configured: 0x01 System peer: 0x02 Enabled for burst mode synchronization: 0x04 Reference clock: 0x08 Preferred server: 0x10 Authentable: 0x20 Synchronization candidate: 0x40 Synchronization candidates short-list: 0x80ro
INTEGER ( 0 .. 255 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.25
alaNtpPeerShowReferenceTimeThis is the local time, in timestamp format, when the peer clock was last updated.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.26
alaNtpPeerShowOriginateTimeThis is the local time, in timestamp format, of the peer when its latest NTP message was sent.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.27
alaNtpPeerShowReceiveTimeThis is the local time, in timestamp format, when the latest NTP message from the peer arrived.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.28
alaNtpPeerShowTransmitTimeThis is the local time, in timestamp format, at which the last NTP message was sent from this association.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.29
alaNtpPeerShowOffsetThe currently estimated offset of this remote association, in seconds.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.30
alaNtpPeerShowDelayThe currently estimated delay of this remote association, in seconds.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.31
alaNtpPeerShowDispersionThe currently estimated dispersion of this remote association, in seconds.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.32
alaNtpPeerShowNameThe DNS name for the peer association,ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.33
alaNtpPeerShowStatusPeer selection status: Bits 0 - 7 - Rejected due to high stratum and/or failed sanity checks: 1 - Designated falsticker by the intersection algorithm: 2 - Excess, culled from the end of the candidate list: 3 - Outlyer, discarded by the clustering algorithm: 4 - Candidate, included in the final selection set: 5 - Selected for synchronization; but distance exceeds maximum: 6 - Selected for synchronization: 7 - Selected for synchronization, PPS signal in use: 8 Peer association status: Bits 9 - 12 - Peer association configured: 9 - Peer authentication required: 10 - Last peer message authenticated: 11 - Peer reachable: 12ro
Bits
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.2.3.1.34
alaNtpStats
OBJECT IDENTIFIER
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3
alaNtpStatsPeerTableTable containing the synchronization host statistics.
SEQUENCE OF NtpStatsPeerEntry
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2
alaNtpStatsPeerEntryEach entry corresponds to a synchronization host.
NtpStatsPeerEntry
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1
alaNtpStatsPeerAddressTypeThe InetAddress type of the synchronization host. InetAddressIPv4 (1) is the only type currently supported.
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.1
alaNtpStatsPeerAddressThe InetAddress of the synchronization host.
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.2
alaNtpStatsPeerIpAddressThe IP address of the synchronization host.ro
IpAddress
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.3
alaNtpStatsPeerLocalThe local interface address assigned by NTP to the remote association.ro
IpAddress
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.4
alaNtpStatsPeerLastRcvThe time since the last packet was received.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.5
alaNtpStatsPeerNextSendThe time until the next packet is to be sent.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.6
alaNtpStatsPeerReachChangeThe time that the peer has been reachable.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.7
alaNtpStatsPeerPacketsSentThe number of packets that have been sent.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.8
alaNtpStatsPeerPacketsRcvdThe number of packets that have been received.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.9
alaNtpStatsPeerBadAuthThe number of packets received with bad authentication.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.10
alaNtpStatsPeerBogusOriginThe number of bogus packets.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.11
alaNtpStatsPeerDuplicateThe number of duplicated packets received.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.12
alaNtpStatsPeerBadDispersionThe number bad dispersions.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.13
alaNtpStatsPeerBadRefTimeThe number of bad reference times received.rodeprecated
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.14
alaNtpStatsPeerCandidateOrderThe order of synchronization candidates.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.15
alaNtpStatsPeerResetThe number of seconds since the statistics for this peer were last reset. Writing any value will reset the peer statistics.rw
INTEGER ( 0 .. 2147483647 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.16
alaNtpStatsPeerNameThe DNS name for the peer association,ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.2.1.17
alaNtpStatsResetResets the statistics counters for the following subsystems: 0x01 - all peers 0x02 - i/o 0x04 - system 0x08 - memory 0x10 - timer 0x20 - authentication 0x40 - controlrw
INTEGER ( 0 .. 127 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.5
alaNtpStatsMonitorTableTable containing the association monitoring list.
SEQUENCE OF NtpStatsMonitorEntry
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6
alaNtpStatsMonitorEntryEach entry corresponds to a synchronization host.
NtpStatsMonitorEntry
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1
alaNtpStatsMonitorIndexTable index.
Unsigned32 ( 1 .. 65535 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.1
alaNtpStatsMonitorAddressThe IP address of the remote association.ro
IpAddress
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.2
alaNtpStatsMonitorPortThe IP port number of the association.ro
INTEGER ( 0 .. 65535 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.3
alaNtpStatsMonitorLocalAddressThe local IP address of the association.ro
IpAddress
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.4
alaNtpStatsMonitorCountThe number of NTP packets received from this association.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.5
alaNtpStatsMonitorModeThe mode the NTP association uses in relation to the switch.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.6
alaNtpStatsMonitorVersionThe version of NTP the association is using.ro
INTEGER ( 1 .. 255 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.7
alaNtpStatsMonitorDropThe number of NTP packets received from this association that were dropped.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.8
alaNtpStatsMonitorLastThe number of seconds since the last NTP message has been received from this association.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.9
alaNtpStatsMonitorFirstThe number of seconds since the first NTP message has been received from this association.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.10
alaNtpStatsMonitorNameThe DNS name for the peer association,ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.3.6.1.11
alaNtpStatsStat
OBJECT IDENTIFIER
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4
alaNtpStatsStatUptimeThe number of seconds the local NTP server has been associated with the switch.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.1
alaNtpStatsStatResetThe number of seconds since the last time the local NTP server has been restarted.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.2
alaNtpStatsStatBadStratumThe number of NTP packets received that had a corrupted stratum bit in the data of the packet.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.3
alaNtpStatsStatOldVersionThe number of NTP packets received that were of an older version of NTP (either version 1 or 2).ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.4
alaNtpStatsStatNewVersionThe number of NTP packets received that were version 3 of NTP.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.5
alaNtpStatsStatUnknownVersionThe number of NTP packets received that the version was unknown (most likely due to packet corruption).ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.6
alaNtpStatsStatBadLengthThe number of NTP packets received that did not fit the NTP packet structure (most likely due to packet corruption).ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.7
alaNtpStatsStatProcessedThe total number of NTP packets processed.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.8
alaNtpStatsStatBadAuthThe number of NTP packets rejected because they did not meet authentication standards.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.9
alaNtpStatsStatLimitRejectsThe number of NTP packets rejected because they did not meet authentication standards.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.4.10
alaNtpStatsLoop
OBJECT IDENTIFIER
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.5
alaNtpStatsLoopOffsetThe currently estimated offset of this remote association, in seconds. This counter indicates the offset of the peer clock relative to the local clock.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.5.1
alaNtpStatsLoopFrequencyA number determining the local clocks frequency in relation to a reference clocks Pulse per Second (PPS). If the clock is running in perfect synchronization, this number should be 1. Otherwise, it will be slightly lower or higher in order to compensate for the time discrepancy between the reference clock and the local clock.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.5.2
alaNtpStatsLoopPollAdjustDetermines the peer polling time.ro
INTEGER ( -30 .. 30 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.5.3
alaNtpStatsLoopWatchdogMakes sure that NTP timer continues to run.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.5.4
alaNtpStatsIo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6
alaNtpStatsIoResetThe number of seconds since the last restart of NTP.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.1
alaNtpStatsIoRcvBuffersThe number of switch receive buffers currently being used by this NTP entity.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.2
alaNtpStatsIoFreeRcvBuffersThe number of free receive buffers.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.3
alaNtpStatsIoUsedRcvBuffersThe number of receive buffers currently being used.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.4
alaNtpStatsIoRefillsThe number of times we added packets.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.5
alaNtpStatsIoDroppedPacketsThe number of packets dropped.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.6
alaNtpStatsIoIgnoredPacketsThe number of packets ignored.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.7
alaNtpStatsIoRcvPacketsThe total number of NTP packets received by the switch.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.8
alaNtpStatsIoSentPacketsThe total number of NTP packets sent by the switch.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.9
alaNtpStatsIoNotSentPacketsThe number of NTP packets generated but not sent due to restrictions.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.10
alaNtpStatsIoInterruptsThe number of times NTP information was interrupted in the process of transmitting or receiving.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.11
alaNtpStatsIoInterruptsRcvThe number of packets received by the interrupt handler.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.6.12
alaNtpAccess
OBJECT IDENTIFIER
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7
alaNtpAccessKeyIdTableTable containing the trusted keys.
SEQUENCE OF NtpAccessKeyIdEntry
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.1
alaNtpAccessKeyIdEntryEntry of a trusted key.
NtpAccessKeyIdEntry
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.1.1
alaNtpAccessKeyIdKeyIdKeyid of the key in the key file.
INTEGER ( 0 .. 65535 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.1.1.1
alaNtpAccessKeyIdTrustThe current state of trust of the table entry.rw
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.1.1.2
alaNtpAccessRestrictedTableTable containing the restricted addresses.
SEQUENCE OF NtpAccessRestrictedEntry
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2
alaNtpAccessRestrictedEntryEntry of a restricted address.
NtpAccessRestrictedEntry
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2.1
alaNtpAccessRestrictedIpAddressIP address to restrict.
IpAddress
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2.1.1
alaNtpAccessRestrictedMaskIP mask to restrict.
IpAddress
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2.1.2
alaNtpAccessRestrictedRestrictionsA mask indicating the restrictions to apply to the entry. 0x0001 - ignore, Ignore all packets from hosts. Can't use this on default (0.0.0.0). 0x0002 - noserve, Ignore NTP packets other than information queries and config-uration requests. 0x0004 - notrust, Treat these hosts normally in other respects, but never use them as synchronization sources. 0x0008 - noquery, Ignore all NTP information queries and configuration requests from the source. 0x0010 - nomodify, Ignore all NTP information queries and configuration requests that attempt to modify the state of the server. 0x0020 - nopeer, Provide stateless time service to polling hosts, but do not allocate peer memory resources to these hosts even if they otherwise might be considered useful as future synchronization partners. 0x0040 - notrap, Decline to provide control message trap service to matching hosts. 0x0080 - lowpriotrap, Declare traps set by matching hosts to be low priority. 0x0100 - limited, These hosts are subject to a limitation of the number of clients from the same net. 0x0200 - version. Serves only current version. 0x0400 - demobilize. A demobilization packet (kod) packet is sent.rw
INTEGER ( 0 .. 1023 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2.1.3
alaNtpAccessRestrictedCountNumber of packets matched.ro
Counter32
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2.1.4
alaNtpAccessRestrictedRowStatusUsed in accordance to installation and removal conventions for conceptual rows. The RowStatus values that are supported are the following: active(1) - The row is active and valid. createAndGo(4) - The row will be created and activated. destroy(6) - The row will be destroyed.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.2.1.5
alaNtpAccessRereadKeyFileReloads the keyfile containing all currently existing keys into the alaNtpAccessKeyIdTable in the switch's memory. Reading this object will yield one of the three following values: inProgress(2), successful(3), failed(4) A value of inProgress means that table reload procedure is inProgress and not yet complete. A sucessful reply means the last attempted keyfile load completed successfully. A failed response indicates the last attempt to reload failed. Writing a value of 1 to this object initiates a reload of the table.rw
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.7.3
alaNtpLocalInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8
alaNtpInfoPeerThe IP address of the remote association.ro
IpAddress
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.1
alaNtpInfoModeThe peer mode of this remote association.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.2
alaNtpInfoLeapIndicatorThe status of leap second insertion for this association.ro
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.3
alaNtpInfoStratumThe stratum level of the remote peer. If this number is 16, the remote peer has not been synchronized.ro
INTEGER ( 1 .. 16 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.4
alaNtpInfoPrecisionThe advertised precision of the switch. It will be a number between -4 and -20.ro
INTEGER( -20..-4 )
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.5
alaNtpInfoDistanceThis is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.6
alaNtpInfoDispersionThis is a signed fixed-point number indicating the maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.7
alaNtpInfoReferenceIdThis is a 32-bit code identifying the particular reference clock. Can be an IP address.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.8
alaNtpInfoReferenceTimeThis is the local time at which the local clock was last set or corrected.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.9
alaNtpInfoFrequencyA number determining the local clocks frequency in relation to a reference clock's Pulse per Second (PPS). If the clock is running in perfect synchronization, this number should be 1. Otherwise, it will be slightly lower or higher in order to compensate for the time difference.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.10
alaNtpInfoStabilityThe stability of the clock in relation to a reference clock's Pulse per Second (PPS).ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.11
alaNtpInfoBroadcastDelayThe broadcast delay, in seconds, of this association.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.12
alaNtpInfoAuthDelayThe authentication delay, in seconds, of this association.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.26.1.1.8.13
alaIND1NtpMIBConformanceBranch For Ntp Subsystem Managed Objects.
OBJECT IDENTIFIER
.1.3.6.1.4.1.6486.801.1.2.1.26.1.2
alaIND1NtpMIBGroupsBranch For Ntp Subsystem Managed Objects.
OBJECT IDENTIFIER
.1.3.6.1.4.1.6486.801.1.2.1.26.1.2.1
alaIND1NtpMIBCompliancesBranch For Ntp Subsystem Managed Objects.
OBJECT IDENTIFIER
.1.3.6.1.4.1.6486.801.1.2.1.26.1.2.2
ntpClientConfigThe Agent Config Information 1 2 3 DEFVAL { 1 } ::= { alcatelIND1NTPMIBObjects 9 } ntpClientIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTIONrwdeprecated
Enumeration
.alaNtpEventsRoot.1
ALCATEL-IND1-NTP-MIB - SNMP MIB Reference | MIBs Explorer