ALCATEL-IND1-LBD-MIB
The ALCATEL-IND1-LBD-MIB manages the Loopback Detection (LBD) feature set on Alcatel-Lucent "Birds of Prey" line cards, specifically monitoring and controlling detection loopback states to identify and isolate Layer 2 connectivity loops. It provides SNMP-accessible objects for configuring loopback detection parameters and retrieving status indicators for active loopback sessions on supported hardware interfaces.
Imported Objects
Objects
35 total| Object Name |
|---|
alcatelIND1LBDMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
LBD for detection loopback.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.56.1 |
alcatelIND1LBDMIBObjectsBranch For Loopback-Detection Subsystem Managed Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.56.1.1 |
alaLbdGlobalConfigStatusThis object is used to enable or disable LBD on the
switch. The value enable (1) indicates that LBD should be
enabled on the switch. The value disable (2) is used to
disable LBD on the switch.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1 |
alaLbdGlobalConfigTransmissionTimerThis object is used to set the transmission timer for LBD
feature globally. It is allowed to modify the timer at any
instance but the new timer value will be effective from next
time the timer restarts.rw Unsigned32 ( 5 .. 600 ) UNITS "seconds" .1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2 |
alaLbdGlobalClearPortStatDefines the global clear statistics control for port for
LBD.
default(0) - default value for this object,
reset(1) - indicates that LBD should clear all statistic
counters related to all ports in the system.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3 |
alaLbdGlobalConfigAutorecoveryTimerThis object is used to make up all the disabled ports which
was caused due to loop-back detection.rw Unsigned32 ( 30 .. 86400 ) UNITS "seconds" .1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4 |
alaLbdPortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5 |
alaLbdPortConfigTableA table containing LBD user port configuration information. SEQUENCE OF AlaLbdPortConfigEntry .1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1 |
alaLbdPortConfigEntryA LBD user port configuration entry. AlaLbdPortConfigEntry .1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1 |
alaLbdPortConfigIfIndexThe physical identification number for this port. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.1 |
alaLbdPortConfigLbdAdminStatusThis object is used to enable or disable loopback-detection per port.
The value enable(1) indicates that loopback-detection is
enabled on this port. The value disable(2) indicates that
loopback-detection is disabled on this port.
The LBD configuration per port can be applied and retained,
irrespective of value of alaLbdGlobalConfigStatus, but the same shall
be functionally unavailable when alaLbdGlobalConfigStatus is set to
disable(2).rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.2 |
alaLbdPortConfigLbdOperStatusThis object specifies the current operational state of the corresponding
port.ro AlaLbdPortConfigLbdOperStatus .1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.3 |
alaLbdPortStat OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6 |
alaLbdPortStatsTableA table containing Loop Back Detection information. SEQUENCE OF AlaLbdPortStatsEntry .1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1 |
alaLbdPortStatsEntryA LBD Statistics entry on per port. AlaLbdPortStatsEntry .1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1 |
alaLbdPortStatsIfIndexThe ifindex of the port on which LBD is running. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.1 |
alaLbdPortNumLbdInvalidRcvdNumber of Invalid packets received by a port.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.2 |
alaLbdPortLbdSentNumber of LBD packets sent by a port.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.3 |
alaLbdPortStatsClearWhen this object is set to reset(1), all statistics parameters
corresponding to this port gets cleared (reset).rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.4 |
alcatelIND1LBDMIBConformanceBranch for LBD Module MIB Subsystem Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.56.1.2 |
alcatelIND1LBDMIBGroupsBranch for LBD Module MIB Subsystem Units of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1 |
alcatelIND1LBDMIBCompliancesBranch for LBD Module MIB Subsystem Compliance Statements. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.56.1.2.2 |
alaLbdTrapsDesc OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.3.2.22.1 |
alaLbdTrapsRoot OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.3.2.22.1.0 |
alaLbdStateChangeToShutdownWhen the port state becomes shutdown, a notification is sent
to the Management Entity with the LBD-state
information. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.3.2.22.1.0.1 |
alaLbdStateChangeForClearViolationAllWhen the the port state changes from shutdown due to
clear-violation-all, a notification is sent to the Management
Entity, with the LBD-state information. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.3.2.22.1.0.2 |
alaLbdStateChangeForAutoRecoveryWhen the port state changes from shutdown due to auto-recovery
mechanism, a notification is sent to the Management Entity
with the LBD-state information. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.3.2.22.1.0.3 |
alaLbdTrapsObj OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.3.2.22.2 |
alaLbdPortIfIndexThe ifIndex of the port on which LBD trap is raisedro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.3.2.22.2.1 |
alaLbdPreviousStateThe previous state of the port on which LBD was running.ro Enumeration .1.3.6.1.4.1.6486.801.1.3.2.22.2.2 |
alaLbdCurrentStateThe current state of the port on which LBD was running.ro Enumeration .1.3.6.1.4.1.6486.801.1.3.2.22.2.3 |
alaLbdPreviousStateClearViolationAllThe state of the the port where LBD was running
before clear-violation-all applied.ro Enumeration .1.3.6.1.4.1.6486.801.1.3.2.22.2.4 |
alaLbdCurrentStateClearViolationAllThe state of the the port where LBD was running
after clear-violation-all applied.ro AlaLbdCurrentStateCVAorAR .1.3.6.1.4.1.6486.801.1.3.2.22.2.5 |
alaLbdPreviousStateAutoRecoveryThe state of the the port where LBD was running
before auto-recovery.ro Enumeration .1.3.6.1.4.1.6486.801.1.3.2.22.2.6 |
alaLbdCurrentStateAutoRecoveryThe state of the the port where LBD was running
after auto-recovery.ro AlaLbdCurrentStateCVAorAR .1.3.6.1.4.1.6486.801.1.3.2.22.2.7 |
More MIBs from AL-Enterprise
Browse all AL-EnterpriseMIBs →The ALCATEL-IND1-QOS-MIB enables monitoring and configuration of Quality of Service (QoS) policies, traffic shaping parameters, and access control list (ACL) filtering rules on Alcatel-Lucent network infrastructure. It provides visibility into queue depths, packet discard rates, and bandwidth allocation statistics to enforce service level agreements and traffic prioritization.
The ALCATEL-IND1-SERVICE-MGR-MIB provides configuration parameters for the Alcatel-Lucent service manager feature, enabling the management of service provisioning, activation, and lifecycle states on carrier-grade network elements. This module facilitates the monitoring of service instance attributes and operational status to ensure correct delivery of managed services across the infrastructure.
The ALCATEL-IND1-FIPS-MIB module enables SNMP-based monitoring of MAC address learning tables and forwarding database states on Alcatel-Lucent Birds of Prey series network switches. It provides enterprise-specific access to layer 2 switching metrics, including learned MAC addresses and their associated port bindings, for traffic analysis and security auditing.
The ALCATEL-IND1-BGP-MIB enables SNMP-based monitoring and configuration of Border Gateway Protocol (BGP) parameters on Alcatel-Lucent network devices, specifically tracking BGP session states, neighbor relationships, and protocol-specific counters. This module provides visibility into the operational status and performance metrics of BGP routing processes to facilitate network troubleshooting and policy enforcement.
The ALCATEL-IND1-DEVICES MIB defines SNMP Object Identifiers for monitoring the physical inventory, chassis status, and module states of Alcatel-Lucent OmniSwitch 4000, 7000, 8000, and 9000 series networking hardware. It enables network management systems to retrieve device topology data, component presence, and hardware health indicators specific to these enterprise switching platforms.
The ALCATEL-IND1-AAA-MIB provides SNMP access to monitor and manage Authentication, Authorization, and Accounting (AAA) subsystem metrics on Alcatel-Lucent "Birds of Prey" network hardware, specifically tracking user session states, authentication failures, and accounting records.