Home/Catalog/ALCATEL-IND1-INTERSWITCH-PROTOCOL-MIB

ALCATEL-IND1-INTERSWITCH-PROTOCOL-MIB

AI MIB Summary

The ALCATEL-IND1-INTERSWITCH-PROTOCOL-MIB provides SNMP-based health monitoring and resource consumption metrics for the Alcatel-Lucent "Birds Of Prey" (INTERSWITCH) product line, specifically tracking protocol states and internal resource utilization within these enterprise switching platforms.

This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Health Monitoring for dissemination of resource consumption information. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1InterswitchProtocolMIB.1.3.6.1.4.1.6486.801.1.2.1.9.1
58
Objects
Active
Status
5
Dependencies

Imported Objects

Objects

58 total
Object Name
alcatelIND1InterswitchProtocolMIBThis module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Health Monitoring for dissemination of resource consumption information. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY
.1.3.6.1.4.1.6486.801.1.2.1.9.1
IMPORTSThis module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Health Monitoring for dissemination of resource consumption information. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
NOTIFICATION-TYPE
.1.3.6.1.4.1.6486.801.1.2.1.9.1
alcatelIND1InterswitchProtocolMIBObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1
aipGMAPconfig
OBJECT IDENTIFIER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.1
aipGMAPstateCurrent state of the GMAP functionality.rw
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.1.1
aipGMAPgaptimeThe time in milliseconds for gaps between successive GMAP protocol packets.rw
INTEGER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.1.2
aipGMAPupdatetimeThe time in seconds between GMAP update packet generation.rw
INTEGER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.1.3
aipGMAPholdtimeThe time in minutes that the switch will remember information received in GMAP update packets.rw
INTEGER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.1.4
aipGMAPLastTrapReasonReason for last GMAP update to not be applied. Valid reasons are: 1 - Target Vlan is an authenticated vlan 2 - Update would conflict with a binding rule 3 - Update would create two different vlan entries for the same protocol 4 - Update would create two different protocol entries for the same vlan 5 - Target vlan is not mobile 6 - No trap has been sentro
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.1.5
aipGMAPLastTrapPortThe ifindex number of the last port on which the GMAP change was not applied because of a conflict.ro
INTEGER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.1.6
aipGMAPLastTrapMacThe last MAC address for which a GMAP change was not applied because of a conflict.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.1.7
aipGMAPLastTrapProtocolThe protocol identifier of the last GMAP change that was not applied because of a conflict.ro
INTEGER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.1.8
aipGMAPLastTrapVlanThe Vlan identifier of the last GMAP change that was not applied because of a conflict.ro
INTEGER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.1.9
aipGMAPTableGMAP MAC address list.
SEQUENCE OF AipGMAPTableEntry
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.1.10
aipGMAPTableEntryGMAP MAC address list.
AipGMAPTableEntry
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.1.10.1
aipGMAPMacAddrThe MAC address of a GMAP entry.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.1.10.1.1
aipGMAPProtocolThe protocol identifier for a GMAP entry.ro
Unsigned32
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.1.10.1.2
aipGMAPVlanThe Vlan identifier for a GMAP entry.ro
INTEGER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.1.10.1.3
aipGMAPSrcSwitchThe MAC address of the switch that provided the information for a GMAP entry.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.1.10.1.4
aipGMAPFlagsThe flags for a GMAP entry. The least significant byte holds the router flags. The next byte contains the flags from auto-tracker. The most significant 2 bytes are not currently used.ro
OCTET STRING
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.1.10.1.5
aipGMAPTimeoutSeconds remaining before this entry will age out.ro
INTEGER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.1.10.1.6
aipAMAPconfig
OBJECT IDENTIFIER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2
aipAMAPstateCurrent state of the AMAP agent.rw
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.1
aipAMAPdisctimeThe time in seconds for interval betweeen hello packets in the initial discovery phase of the AMAP protocol.rw
INTEGER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.2
aipAMAPcommontimeThe time in seconds for the interval between hello packets at other than the discovery phase.rw
INTEGER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.3
aipAMAPLastTrapReasonReason for last change of port status. Valid reasons are: 1 - port added 2 - change of information on existing port 3 - port deleted 4 - no trap has been sentro
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.4
aipAMAPLastTrapPortThe ifindex number of the port that most recently changed.ro
INTEGER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.5
aipAMAPportConnectionTableAMAP adjacent switch, local and remote connection index, and Vlan information.
SEQUENCE OF AipAMAPportConnectionEntry
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.6
aipAMAPportConnectionentryAMAP adjacent switch, local and remote connection index, and Vlan information.
AipAMAPportConnectionEntry
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.6.1
aipAMAPLocalConnectionIndexThe local index number of a connection in the local switch which has an adjacent switch connected. This index is assigned to a connection by the AMAP application running on the local switch.ro
INTEGER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.6.1.1
aipAMAPRemMacThe MAC Address of the CMM in the adjacent switch.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.6.1.2
aipAMAPRemConnectionIndexThe remote index number of the connection in the adjacent switch to which the local switch has a connection connected. This index is assigned to a connection by the AMAP application running on the adjacent switch.ro
INTEGER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.6.1.3
aipAMAPRemVlanThe remote Vlan to which the connection is connected in the adjacent switch.ro
INTEGER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.6.1.4
aipAMAPRemHostnameThe remote hostname for the adjacent switch.ro
DisplayString
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.6.1.5
aipAMAPLocalIfindexThe local ifindex of the port to which the connection is connected.ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.6.1.6
aipAMAPLocalSlotThe local slot of the port to which the connection is connected.ro
INTEGER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.6.1.7
aipAMAPLocalPortThe local interface port of the port to which the connection is connected.ro
INTEGER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.6.1.8
aipAMAPRemSlotThe remote slot of the port to which the connection is connected.ro
INTEGER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.6.1.9
aipAMAPRemPortThe remote interface port of the port to which the connection is connected.ro
INTEGER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.6.1.10
aipAMAPRemDeviceTypeThe type of device seen on the port.ro
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.6.1.11
aipAMAPRemDevModelNameThe remote device's model name (marketing name) for the adjacent switch.ro
DisplayString
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.6.1.12
aipAMAPRemProductTypeType of product connected to remote end. e.g. chassis, stack, wireless acess point etcro
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.6.1.13
aipAMAPhostsTableAMAP adjacent switch IP address information.
SEQUENCE OF AipAMAPHostEntry
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.7
aipAMAPHostentryAMAP adjacent switch IP address information.
AipAMAPHostEntry
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.7.1
aipAMAPHostMacThe MAC Address of the CMM in the adjacent switch.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.7.1.1
aipAMAPIpAddrAn IP address of the adjacent switch.ro
IpAddress
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.7.1.2
aipAMAPVoiceVlanThe user configured VLAN value to be passed in AMAP pkt to neighbouring bridges as voice vlan used for IP phones. If the value is 0 (zero) then there is no voice vlan configured on the switch.rw
INTEGER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.2.8
aipLLDPConfig
OBJECT IDENTIFIER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.3
aipLLDPConfigManAddrTableThe table that controls selection of LLDP management address TLV instances to be transmitted on individual ports.
SEQUENCE OF AipLLDPConfigManAddrEntry
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.3.1
aipLLDPConfigManAddrEntryLLDP configuration information for a particular port on which the local system management address instance will be transmitted.
AipLLDPConfigManAddrEntry
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.3.1.1
aipLLDPConfigManAddrPortNumThe port ifindex of the port associated with this entry.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.3.1.1.1
aipLLDPConfigManAddrTlvTxEnableThis object controls, on a per port basis, whether or not management address TLV instances are transmitted. The value true(1) means that management address TLVs are transmitted ; the value false(2) means that they are not.The default value for this object is false(2).rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.3.1.1.2
aipLLDPDestMacThis object specifies LLDP destination mac address on global level The default value for this object is nearestBridge(1).rw
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.9.1.1.3.2
alcatelIND1InterswitchProtocolMIBConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.2
alcatelIND1InterswitchProtocolMIBGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.2.1
alcatelIND1InterswitchProtocolMIBCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.6486.801.1.2.1.9.1.2.2
aipAMAPStatusTrapAn AMAP port status change and reason.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6486.801.1.3.2.1.0.1
aipGMAPConflictTrapA GMAP update conflict.
NOTIFICATION-TYPE
.1.3.6.1.4.1.6486.801.1.3.2.2.0.1
ALCATEL-IND1-INTERSWITCH-PROTOCOL-MIB - SNMP MIB Reference | MIBs Explorer