ALCATEL-IND1-INLINE-POWER-MIB
The ALCATEL-IND1-INLINE-POWER-MIB enables SNMP-based monitoring and control of Power over Ethernet (PoE) capabilities on Alcatel-Lucent network switches, specifically tracking per-port power allocation, available power budgets, and the operational status of connected inline-powered devices.
Imported Objects
Objects
29 total| Object Name |
|---|
alcatelIND1INLINEPOWERMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
Propietary InLinePower Extensions MIB definitions
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special,
or consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.27.1 |
alaPethObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.27.1.1 |
alaPethPsePortTableA table of objects that augments the standard pethPsePortTable
entry by adding the alaPethPsePortPowerMaximum object. SEQUENCE OF AlaPethPsePortEntry .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1 |
alaPethPsePortEntryA set of objects that display and control the power
characteristics of a power Ethernet PSE port. AlaPethPsePortEntry .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1.1 |
alaPethPsePortPowerMaximumThis object controls maximum amount of power per port.rw INTEGER ( 3000 .. 30000 ) .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1.1.1 |
alaPethPsePortPowerActualThis object contains the actual amount of power used by a portro INTEGER ( 0 .. 30000 ) .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1.1.2 |
alaPethPsePortPowerStatusThis object contains the power status of a portro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1.1.3 |
alaPethPsePortPowerClassThis object controls class of poe device attached on a port.
class0 - The device can draw PD power from 0.44W to 12.95W and
current less than 5.0 mA.
class1 - The device can draw PD power from 0.44W to 3.84W and
current 10.5 mA.
class2 - The device can draw PD power from 3.84W to 6.49W and
current 12.95 mA.
class3 - The device can draw PD power from 6.49W to 12.95W and
current 28 mA.
class4 - This class is reserved for future use.
class5 - No Powered Device is connected to this POE port, or the
port is powered down.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.1.1.4 |
alaPethMainPseTableThis table augments the standard table PethMainPseTable by allowing the
admin status for a group to be set to on/off as well as
showing the values for the max power for that group. SEQUENCE OF AlaPethMainPseEntry .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2 |
alaPethMainPseEntryA set of objects that display and control the Main power
of a PSE. AlaPethMainPseEntry .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1 |
alaPethMainPseAdminStatusThe object is used to set the status of the main PSE to ON or OFF.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.1 |
alaPethMainPseMaxPowerThe maximum amount of power allowed for main PSE.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.2 |
alaPethMainPsePriorityDisconnectThe object is used to set the priority disconnect of the
main PSE to Enabled or Disable.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.3 |
alaPethMainPseCapacitorDetectThe object is used to enable or disable the PowerDsine
Capacitor detection method.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.4 |
alaPethMainPsePriorityThe object is set the power down priority for the slotrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.5 |
alaPethMainPseComboPortThe object is used to set the combo port option of the
main PSE to Enable or Disable.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.2.1.6 |
alaPethNotificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.3 |
pethSourceSlotSlot number of generating entity.ro INTEGER .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.3.1 |
pethSourcePortPort number of generating entity.ro INTEGER .1.3.6.1.4.1.6486.801.1.2.1.27.1.1.3.2 |
alaPethConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.27.1.2 |
alaPethCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.27.1.2.1 |
alaPethGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.27.1.2.2 |
alaPethMain OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.27.1.3 |
alaPethMainTableA table of objects that augments the standard pethPsePortTable
entry by adding the alaPethPsePortPowerMaximum object. SEQUENCE OF AlaPethMainEntry .1.3.6.1.4.1.6486.801.1.2.1.27.1.3.1 |
alaPethMainEntryA set of objects that display and control the power
characteristics of a power Ethernet PSE port. AlaPethMainEntry .1.3.6.1.4.1.6486.801.1.2.1.27.1.3.1.1 |
alaPethMainIndexThis variable uniquely identifies the group to which
power Ethernet PSE is connected.Group means (box in the stack,
module in a rack) and the value 1 MUST be used for non-modular
devices Integer32 .1.3.6.1.4.1.6486.801.1.2.1.27.1.3.1.1.1 |
alaPethMainPowerRedundancyThis object controls power supply redundancy.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.27.1.3.1.1.2 |
pethPwrSupplyConflictPower supply type conflict trap. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.3.2.17.0.1 |
pethPwrSupplyNotSupportedPower supply not supported trap. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.3.2.17.0.2 |
More MIBs from AL-Enterprise
Browse all AL-EnterpriseMIBs →The ALCATEL-IND1-QOS-MIB enables monitoring and configuration of Quality of Service (QoS) policies, traffic shaping parameters, and access control list (ACL) filtering rules on Alcatel-Lucent network infrastructure. It provides visibility into queue depths, packet discard rates, and bandwidth allocation statistics to enforce service level agreements and traffic prioritization.
The ALCATEL-IND1-SERVICE-MGR-MIB provides configuration parameters for the Alcatel-Lucent service manager feature, enabling the management of service provisioning, activation, and lifecycle states on carrier-grade network elements. This module facilitates the monitoring of service instance attributes and operational status to ensure correct delivery of managed services across the infrastructure.
The ALCATEL-IND1-FIPS-MIB module enables SNMP-based monitoring of MAC address learning tables and forwarding database states on Alcatel-Lucent Birds of Prey series network switches. It provides enterprise-specific access to layer 2 switching metrics, including learned MAC addresses and their associated port bindings, for traffic analysis and security auditing.
The ALCATEL-IND1-BGP-MIB enables SNMP-based monitoring and configuration of Border Gateway Protocol (BGP) parameters on Alcatel-Lucent network devices, specifically tracking BGP session states, neighbor relationships, and protocol-specific counters. This module provides visibility into the operational status and performance metrics of BGP routing processes to facilitate network troubleshooting and policy enforcement.
The ALCATEL-IND1-DEVICES MIB defines SNMP Object Identifiers for monitoring the physical inventory, chassis status, and module states of Alcatel-Lucent OmniSwitch 4000, 7000, 8000, and 9000 series networking hardware. It enables network management systems to retrieve device topology data, component presence, and hardware health indicators specific to these enterprise switching platforms.
The ALCATEL-IND1-AAA-MIB provides SNMP access to monitor and manage Authentication, Authorization, and Accounting (AAA) subsystem metrics on Alcatel-Lucent "Birds of Prey" network hardware, specifically tracking user session states, authentication failures, and accounting records.