ALCATEL-IND1-ETHERNET-OAM-MIB
The ALCATEL-IND1-ETHERNET-OAM-MIB enables SNMP-based monitoring and management of Ethernet Operations, Administration, and Maintenance (OAM) functions, specifically Connectivity Fault Management (CFM) metrics, on Alcatel-Lucent "Birds of Prey" hardware platforms. This module provides access to critical OAM data points including Maintenance Association (MA) states, Continuity Check (CCM) message counters, and fault detection events for Layer 2 service integrity verification.
Imported Objects
Objects
31 total| Object Name |
|---|
alcatelIND1EoamMIBThis module describes an authoritative enterprise-
specific Simple Network Management Protocol (SNMP) Management
Information Base (MIB):
For the Birds Of Prey Product Line
Ethernet OAM for the Connectivity Fault Management.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect,
special, or consequential damages whatsoever arising from or
related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.40.1 |
IMPORTSThis module describes an authoritative enterprise-
specific Simple Network Management Protocol (SNMP) Management
Information Base (MIB):
For the Birds Of Prey Product Line
Ethernet OAM for the Connectivity Fault Management.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect,
special, or consequential damages whatsoever arising from or
related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
ALL RIGHTS RESERVED WORLDWIDE Unknown .1.3.6.1.4.1.6486.801.1.2.1.40.1 |
alcatelIND1CfmMIBObjectsBranch For Connectivity Fault Management (Ethernet OAM) Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.40.1.1 |
alaCfmBase OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.1 |
alaCfmGlobalClearStatsDefines the global clear statistics control for Ethernet OAM.
The value reset (1) indicates that Ethernet OAM should clear all
statistic counters related to all MEPs in the system.
By default, this object contains a zero value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.1.1 |
alaCfmGlobalOWDClearDefines the global clear of one-way-delay entries control for
Ethernet OAM. The value reset (1) indicates that Ethernet OAM
should remove all the one-way-delay entries in the delay result
table. By default, this object contains a zero value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.1.2 |
alaCfmGlobalTWDClearDefines the global clear of two-way-delay entries control for
Ethernet OAM. The value reset (1) indicates that Ethernet OAM
should remove all the two-way-delay entries in the delay result
table. By default, this object contains a zero value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.1.3 |
alaCfmMep OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2 |
alaCfmMepTableThis table augments the MEP table for clearing statistics based
on MdIndex/MaIndex/MEPId. This table also contains the objects for
initiating 1DM and DMM. SEQUENCE OF AlaCfmMepEntry .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1 |
alaCfmMepEntryEach row entry in the alaCfmMepTable represents additional
column for proprietary extension to the existing MEP table.
It provides the facility to clear the statistics based on
uniquely identified MEP. It also provides the facility to
intiate 1DM and DMM AlaCfmMepEntry .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1 |
alaCfmMepClearStatsReset all statistics parameters corresponding to this MEP.
By default, this objects contains a zero value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.1 |
alaCfmMepOWDTMacAddressSpecifies the MAC address used as a target for the
One-Way-Delay Test (OWDT).
Setting this object will trigger a One-Way-Delay test to the specified
MAC address. The number of messages transmitted per initiation will
be 2.
Upon completion of the test, the MacAddress will revert to it's
default value, indicating that another test is possible.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.2 |
alaCfmMepOWDTRMepIdentifierSpecifies the Mep-Id assigned to the Remote MEP.rw Dot1agCfmMepId .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.3 |
alaCfmMepOWDTPrioritySpecifies the priority used in the generated test frame
for the One-Way-Delay test.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.4 |
alaCfmMepTWDTMacAddressSpecifies the MAC address used as a target for the
Two-Way-Delay Test (TWDT).
Setting this object will trigger a Two-Way-Delay test to the specified
MAC address. The number of messages transmitted per initiation will
be 2.
Upon completion of the test, the MacAddress will revert to it's
default value, indicating that another test is possible.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.5 |
alaCfmMepTWDTRMepIdentifierSpecifies the Mep-Id assigned to the Remote MEP.rw Dot1agCfmMepId .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.6 |
alaCfmMepTWDTPrioritySpecifies the priority used in the generated test
frame for the Two-Way-Delay test.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.7 |
alaCfmMepRFPEnabledIf set to true, Remote Fault Propagation will be enabled
on the MEP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.8 |
alaCfmMepPortStatusTlvIf set to true, Port Status Tlv will be configured in CCM.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.9 |
alaCfmMepIfStatusTlvIf set to true, Interface Status Tlv will be configured in CCM.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.2.1.1.10 |
alaCfmDelayResult OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.3 |
alaCfmDelayResultTableIndicates the results of all the One-Way/Two-Way Delay Tests
from the originating MAC addresses.
This table is not persistent over reboots of the chassis. SEQUENCE OF AlaCfmDelayResultEntry .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.3.1 |
alaCfmDelayResultEntryThe MEP delay result table. AlaCfmDelayResultEntry .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.3.1.1 |
alaCfmDelayResultTypeIndicates the type of test this row details. Enumeration .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.3.1.1.1 |
alaCfmDelayResultRMepMacAddressIndicates the MAC address of the Remote MEP. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.3.1.1.2 |
alaCfmDelayResultRMepIdentifierIndicates the Mep-Id of the Remote MEP. Valid only in the case of
two-way delay. When initiated for a target Mep-Id contains the
Mep-Id of the target, else if two-way delay initiated for a
target mac-address contains '0'.ro Dot1agCfmMepIdOrZero .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.3.1.1.3 |
alaCfmDelayResultTestDelayIndicates the amount of time, measured in microseconds,
from when the test-frame was transmitted to the time
it was received minus the local processing time
taken by the remote system.ro Integer32 UNITS "microseconds" .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.3.1.1.4 |
alaCfmDelayResultVariationIndicates the amount of time delay variation, measured
in microseconds, from the two most recent time delay measurementsro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.6486.801.1.2.1.40.1.1.3.1.1.5 |
alaCfmConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.40.1.2 |
alaCfmGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.40.1.2.1 |
alaCfmCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.40.1.2.2 |
More MIBs from AL-Enterprise
Browse all AL-EnterpriseMIBs →The ALCATEL-IND1-QOS-MIB enables monitoring and configuration of Quality of Service (QoS) policies, traffic shaping parameters, and access control list (ACL) filtering rules on Alcatel-Lucent network infrastructure. It provides visibility into queue depths, packet discard rates, and bandwidth allocation statistics to enforce service level agreements and traffic prioritization.
The ALCATEL-IND1-SERVICE-MGR-MIB provides configuration parameters for the Alcatel-Lucent service manager feature, enabling the management of service provisioning, activation, and lifecycle states on carrier-grade network elements. This module facilitates the monitoring of service instance attributes and operational status to ensure correct delivery of managed services across the infrastructure.
The ALCATEL-IND1-FIPS-MIB module enables SNMP-based monitoring of MAC address learning tables and forwarding database states on Alcatel-Lucent Birds of Prey series network switches. It provides enterprise-specific access to layer 2 switching metrics, including learned MAC addresses and their associated port bindings, for traffic analysis and security auditing.
The ALCATEL-IND1-BGP-MIB enables SNMP-based monitoring and configuration of Border Gateway Protocol (BGP) parameters on Alcatel-Lucent network devices, specifically tracking BGP session states, neighbor relationships, and protocol-specific counters. This module provides visibility into the operational status and performance metrics of BGP routing processes to facilitate network troubleshooting and policy enforcement.
The ALCATEL-IND1-DEVICES MIB defines SNMP Object Identifiers for monitoring the physical inventory, chassis status, and module states of Alcatel-Lucent OmniSwitch 4000, 7000, 8000, and 9000 series networking hardware. It enables network management systems to retrieve device topology data, component presence, and hardware health indicators specific to these enterprise switching platforms.
The ALCATEL-IND1-AAA-MIB provides SNMP access to monitor and manage Authentication, Authorization, and Accounting (AAA) subsystem metrics on Alcatel-Lucent "Birds of Prey" network hardware, specifically tracking user session states, authentication failures, and accounting records.