ALCATEL-IND1-DOT1Q-MIB
The ALCATEL-IND1-DOT1Q-MIB enables SNMP-based management of 802.1Q VLAN configurations on Alcatel-Lucent "Birds of Prey" hardware, specifically monitoring and controlling VLAN assignments to physical slots, ports, and link aggregates. This module provides access to enterprise-specific scalar and table objects required to retrieve and modify the mapping of VLAN IDs to network interfaces for traffic segregation and switching operations.
Imported Objects
Objects
30 total| Object Name |
|---|
alcatelIND1Dot1QMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
802.1q for vlan assignment to slot/port and aggregates
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.21.1 |
alcatelIND1Dot1QMIBObjectsBranch For 802.1Q
Subsystem Managed Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.21.1.1 |
v8021Q OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1 |
qPortVlanTableThis table lists the 802.1q vlans on a port. SEQUENCE OF QPortVlanEntry .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.1 |
qPortVlanEntryAn entry in 802.1q port vlan table. QPortVlanEntry .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.1.1 |
qPortVlanSlotThe slot id of the required port.rw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.1.1.1 |
qPortVlanPortThe physical port number.rw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.1.1.2 |
qPortVlanTagValueTag for a particular portrw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.1.1.3 |
qPortVlanStatusRow Status for creating/deleting rulesrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.1.1.4 |
qPortVlanDescriptionTextual description of vlan added to a port.rw DisplayString ( SIZE .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.1.1.5 |
qPortVlanForceTagInternal0-ON, 1-OFF and 2-NArw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.1.1.6 |
qAggregateVlanTableThis table lists the 802.1q vlans on a aggregate. SEQUENCE OF QAggregateVlanEntry .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.2 |
qAggregateVlanEntryAn entry in 802.1q aggregate vlan table. QAggregateVlanEntry .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.2.1 |
qAggregateVlanAggregateIdThe aggreagte id of the aggregate.rw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.2.1.1 |
qAggregateVlanTagValueTag Value on the particular aggregate.rw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.2.1.2 |
qAggregateVlanStatusRow status for creating/deleting rules.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.2.1.3 |
qAggregateVlanDescriptionTextual description of vlan added to a aggregate.rw DisplayString ( SIZE .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.2.1.4 |
qAtmIfIndexVpiVciTableThis table lists the 802.1q vlans on an ATM port. SEQUENCE OF QAtmIfIndexVpiVciEntry .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3 |
qAtmIfIndexVpiVciEntryAn entry in 802.1q IfIndex/VPI/VCI vlan table. QAtmIfIndexVpiVciEntry .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3.1 |
qAtmIfIndexThe ATM Interface Index.rw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3.1.1 |
qAtmVpiValue.The Vpi value of the ATM VC..rw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3.1.2 |
qAtmVciValue.The Vci value of the ATM VC..rw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3.1.3 |
qAtmIfIndexVpiVciVlanTagValueTag for a particular ATM Interface Indexrw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3.1.4 |
qAtmIfIndexVpiVciVlanActionRow Status for creating/deleting services.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3.1.5 |
qAtmIfIndexVpiVciVlanDescriptionTextual description of vlan added to an Interface Index.rw DisplayString ( SIZE .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3.1.6 |
qAtmIfIndexVpiVciAcceptableFrameTypesWhen this is admitOnlyVlanTagged(2) the device will
discard untagged frames or Priority-Tagged frames
received on this port. When admitAll(1), untagged
frames or Priority-Tagged frames received on this port
will be accepted and assigned to the PVID for this port.
This control does not affect VLAN independent BPDU
frames, such as GVRP and STP. It does affect VLAN
dependent BPDU frames, such as GMRP.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3.1.7 |
qAtmIfIndexVpiVciForceTagInternal0-ON, 1-OFF and 2-NArw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3.1.8 |
alcatelIND1Dot1QMIBConformanceBranch For 802.1Q
Subsystem Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.21.1.2 |
alcatelIND1Dot1QMIBGroupsBranch For 802.1Q
Subsystem Units Of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.21.1.2.1 |
alcatelIND1Dot1QMIBCompliancesBranch For 802.1Q
Subsystem Compliance Statements. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.21.1.2.2 |
More MIBs from AL-Enterprise
Browse all AL-EnterpriseMIBs →The ALCATEL-IND1-QOS-MIB enables monitoring and configuration of Quality of Service (QoS) policies, traffic shaping parameters, and access control list (ACL) filtering rules on Alcatel-Lucent network infrastructure. It provides visibility into queue depths, packet discard rates, and bandwidth allocation statistics to enforce service level agreements and traffic prioritization.
The ALCATEL-IND1-SERVICE-MGR-MIB provides configuration parameters for the Alcatel-Lucent service manager feature, enabling the management of service provisioning, activation, and lifecycle states on carrier-grade network elements. This module facilitates the monitoring of service instance attributes and operational status to ensure correct delivery of managed services across the infrastructure.
The ALCATEL-IND1-FIPS-MIB module enables SNMP-based monitoring of MAC address learning tables and forwarding database states on Alcatel-Lucent Birds of Prey series network switches. It provides enterprise-specific access to layer 2 switching metrics, including learned MAC addresses and their associated port bindings, for traffic analysis and security auditing.
The ALCATEL-IND1-BGP-MIB enables SNMP-based monitoring and configuration of Border Gateway Protocol (BGP) parameters on Alcatel-Lucent network devices, specifically tracking BGP session states, neighbor relationships, and protocol-specific counters. This module provides visibility into the operational status and performance metrics of BGP routing processes to facilitate network troubleshooting and policy enforcement.
The ALCATEL-IND1-DEVICES MIB defines SNMP Object Identifiers for monitoring the physical inventory, chassis status, and module states of Alcatel-Lucent OmniSwitch 4000, 7000, 8000, and 9000 series networking hardware. It enables network management systems to retrieve device topology data, component presence, and hardware health indicators specific to these enterprise switching platforms.
The ALCATEL-IND1-AAA-MIB provides SNMP access to monitor and manage Authentication, Authorization, and Accounting (AAA) subsystem metrics on Alcatel-Lucent "Birds of Prey" network hardware, specifically tracking user session states, authentication failures, and accounting records.