ALCATEL-IND1-CONFIG-MGR-MIB
AI MIB Summary
The ALCATEL-IND1-CONFIG-MGR-MIB provides SNMP access to the Configuration Manager subsystem for the Alcatel-Lucent "Birds Of Prey" product line, enabling the retrieval and modification of device configuration parameters and state variables. This module facilitates the programmatic management of system settings, interface definitions, and operational modes specific to Alcatel-Lucent's legacy enterprise routing and switching hardware.
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line Configuration Manager Subsystem.
The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1ConfigMgrMIB.1.3.6.1.4.1.6486.801.1.2.1.11.1
104
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
104 total| Object Name |
|---|
alcatelIND1ConfigMgrMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Configuration Manager Subsystem.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.11.1 |
IMPORTSThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Configuration Manager Subsystem.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE Unknown .1.3.6.1.4.1.6486.801.1.2.1.11.1 |
alcatelIND1ConfigMgrMIBObjectsBranch For Configuration Manager Subsystem Managed Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.11.1.1 |
configManager OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1 |
configFileNameThe name of the configuration file to be
read by the device. The file specified
should be present on the device.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.1 |
configFileActionTriggers application of the configuration
file specified by the configInputFileName.
A value of checkSyntax causes configInputFile
to be checked for syntax, with no changes to
device configuration. A value of
checkSyntaxAndApply causes the configInputFile
to be applied to the device configuration.A value
of none indicates no action has been triggered.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.2 |
configErrorFileNameThe name of the file containing the error
messages generated by the device during file
configuration.ro SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.3 |
configFileStatusStatus of most recent application of configuration
file to the device.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.4 |
configFileModeThe verbose mode displays all configuration commands
and errors when the file is applied on the console
screen. Ignored unless set from command line interface.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.5 |
configTimerFileNameThe name of the configuration file to be read later
by the device.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.6 |
configTimerFileTimeThe local time when the configuration file
will be read by the device. This object is
only set if the configInputFile must be applied
at a later time.
The following formats are valid:
MM/DD/YYYY hh:mm
MM/DD/YY hh:mm
MM/DD hh:mm - uses current year if
after current date and time,
next year otherwise.
hh:mm - uses today's date if later
than current time,
tommorow's date otherwise.
where
YY - year (0-38,99)
MM - month (1-12)
DD - day (1-31)
hh - hour (0-23)
mm - minute (0-59)rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.7 |
configTimerFileStatusThe current status of the ASCII configuration
timer.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.8 |
configTimerClearA set of this object causes the ASCII
configuration timer to be cleared.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.9 |
configSnapshotFileNameThe name of the configuration snap-shot file
to be generated by the device.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.10 |
configSnapshotActionA set of this object causes the configuration
snap-shot to be generated by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.11 |
configSnapshotAllSelectA set of this object causes
all application configuration data to be
included in the snap-shot file generated by
the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.12 |
configSnapshotVlanSelectA set of this object causes
Vlan configuration data to be
included in the snap-shot file generated by
the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.13 |
configSnapshotSpanningTreeSelectA set of this object causes
Spanning Tree configuration data to be
included in the snap-shot file generated by
the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.14 |
configSnapshotQOSSelectA set of this object causes
QOS configuration data to be included
in the snap-shot file generated by the
the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.15 |
configSnapshotIPSelectA set of this object causes
IP configuration data to be included
in the snap-shot file generated by the
the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.16 |
configSnapshotIPXSelectA set of this object causes
IPX configuration data to be included
in the snap-shot file generated by the
the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.17 |
configSnapshotIPMSSelectA set of this object causes
IPMS configuration data to be included
in the snap-shot file generated by the
the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.18 |
configSnapshotAAASelectA set of this object causes
AAA configuration data to be included
in the snap-shot file generated by the
the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.19 |
configSnapshotSNMPSelectA set of this object causes
SNMP configuration data to be included
in the snap-shot file generated by the
the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.20 |
configSnapshot8021QSelectA set of this object causes
802.1Q configuration data to be included
in the snap-shot file generated by the
the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.21 |
configSnapshotLinkAggregateSelectA set of this object causes
link aggregation configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.22 |
configSnapshotPortMirrorSelectA set of this object causes
port mirroring configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.23 |
configSnapshotXIPSelectA set of this object causes
proprietary inter-switch protocol configuration
data to be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.24 |
configSnapshotHealthMonitorSelectA set of this object causes
health monitoring configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.25 |
configSnapshotBootPSelectA set of this object causes
bootp configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.26 |
configSnapshotBridgeSelectA set of this object causes
source-learning configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.27 |
configSnapshotChassisSelectA set of this object causes
the chassis configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.28 |
configSnapshotInterfaceSelectA set of this object causes
ethernet interface configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.29 |
configSnapshotPolicySelectA set of this object causes
policy manager configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.30 |
configSnapshotSessionSelectA set of this object causes
the user-session configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.31 |
configSnapshotServerLoadBalanceSelectA set of this object causes
server load balancing configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.32 |
configSnapshotSystemServiceSelectA set of this object causes
system services configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.33 |
configSnapshotVRRPSelectA set of this object causes
VRRP configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.34 |
configSnapshotWebSelectA set of this object causes
web manager configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.35 |
configSnapshotRIPSelectA set of this object causes
RIP configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.36 |
configSnapshotOSPFSelectA set of this object causes
OSPF configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.37 |
configSnapshotBGPSelectA set of this object causes
BGP configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.38 |
configSnapshotIPRMSelectA set of this object causes
IPRM routing configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.39 |
configSnapshotIPMRSelectA set of this object causes
IP multicast routing configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.40 |
configSnapshotModuleSelectA set of this object causes
module configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.41 |
configTechSupportLogActionA set of this object causes
a tech_support.log file to be created
containing switch information useful to
a technical support group.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.42 |
configWriteMemoryA set of this object causes
the entire switch snap-shot configuration to
be stored in the boot.cfg file in the
current running directory.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.43 |
configErrorFileMaximumThe maximum number of error files which may be
present on a switch. Each time a new error file
is created, all but the newest configErrorFileMaxNum
error files are deleted.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.44 |
configChangeStatusThe current state of the running configuration with respect
to the saved configuration.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.45 |
configSnapshotRDPSelectA set of this object causes
RDP configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.46 |
configSnapshotIPv6SelectA set of this object causes
IPv6 configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.47 |
configSnapshotRIPngSelectA set of this object causes
RIPng configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.48 |
configSnapshotAtmSelectA set of this object causes
ATM configuration data to
be included in the snap-shot file generated
by the device. NOT SUPPORTED.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.49 |
configSnapshotSonetSelectA set of this object causes
Sonet configuration data to
be included in the snap-shot file generated
by the device. NOT SUPPORTED.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.50 |
configSnapshotNTPSelectA set of this object causes
NTP configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.51 |
configSnapshotPortMappingSelectA set of this object causes
Port Mapping configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.52 |
configSnapshotOSPF3SelectA set of this object causes
OSPF3 configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.53 |
configWriteMemoryStatusStatus of most recent wwrite memory action.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.54 |
configSnapshotStackSelectA set of this object causes
STack Manager configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.55 |
configSnapshotISISSelectA set of this object causes
ISIS configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.56 |
configSnapshotEOAMSelectA set of this object causes
Ethernet OAM configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.57 |
configSnapshotUDLDSelectA set of this object causes
UDLD configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.58 |
configSnapshotNETSECSelectA set of this object causes
NETSEC configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.59 |
configSnapshotIPsecSelectA set of this object causes
IP Security configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.60 |
configSnapshotBFDSelectA set of this object causes
BFD configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.61 |
configSnapshotMultiChassisSelectA set of this object causes
MCM configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.62 |
configSnapshotErpSelectA set of this object causes
ERP configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.63 |
configSnapshotMPLSSelectA set of this object causes
MPLS configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.64 |
configSnapshotEFMOAMSelectA set of this object causes
EFMOAM configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.65 |
configSnapshotCapabilitySelectA set of this object causes
capability manager configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.66 |
configSnapshotVfcSelectA set of this object causes
VFC configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.67 |
configSnapshotHaVlanSelectA set of this object causes
HA VLAN configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.68 |
configSnapshotDaUnpSelectA set of this object causes
DA UNP configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.69 |
configSnapshotDHLSelectA set of this object causes
DHL configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.70 |
configSnapshotMVRPSelectA set of this object causes
MVRP configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.71 |
configSnapshotSAASelectA set of this object causes
SAA configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.72 |
configSnapshotSPBSelectA set of this object causes
SPB configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.73 |
configSnapshotSPBIsisSelectA set of this object causes
SPB ISIS configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.74 |
configSnapshotVirtualChassisSelectA set of this object causes VCM configuration
data to be included in the snap-shot file
generated by the device. A set of this object
is only valid in standalone moderw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.75 |
configSnapshotMplsLdpSelectA set of this object causes
MPLS LDP configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.76 |
configSnapshotVCMSpecificA set of this object causes
VCM configuration data for the chassis
specified by configSnapshotChassisId to
be included in the snap-shot file generated
by the device A set of this object is only
valid in virtual chassis mode.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.77 |
configSnapshotChassisIdA set of this object in combination with
configSnapshotVCMSpecific causes
VCM configuration data for the specified
chassis to be included in the snap-shot
file generated by the device. A set of
this object is only valid in virtual
chassis mode.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.78 |
configSnapshotEvbSelectA set of this object causes
EVB configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.79 |
configConvertConfigurationA set of this object to virtualChassis is only valid in
standalone mode and causes a virtual chassis snapshot to be
generated from the running configuration. The resulting
vcsetup.cfg and vcboot.cfg files are stored in the directory
specified by configConvertDestinationDirectory. If no directory
is specified the running directory will be used provided the
running directory is not the certified directory.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.80 |
configConvertConfigurationStatusStatus of most recent convert configuration action.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.81 |
configConvertDestinationDirectoryThe destination directory for the files created by the action
of setting the configConvertConfiguration object.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.82 |
configConvertReloadA set of this object will initiate a reboot of the
switch as part of the configConvertConfiguration
action.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.83 |
configSnapshotAppfpSelectA set of this object causes
Application Finger Print configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.84 |
configSnapshotFipsSelectA set of this object causes
FIP Snooping configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.85 |
configSnapshotLFPSelectA set of this object causes
LFP configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.86 |
configSnapshotPmInterfaceSelectA set of this object causes
Port Manager Interfaceconfiguration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.87 |
configSnapshotAutofabricSelectA set of this object causes
Autofabric configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.88 |
configSnapshotDhcpv6RelaySelectA set of this object causes
DHCPv6 Relay configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.89 |
configSnapshotSIPSelectA set of this object causes
Autofabric configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.90 |
configSnapshotOpenflowSelectA set of this object causes
Openflow configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.91 |
configSnapshotWlanSelectA set of this object causes
Wlan configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.92 |
configSnapshotDhcpSrvSelectA set of this object causes
DhcpSrv configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.93 |
configSnapshotDPISelectA set of this object causes
Dpi configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.94 |
configSnapshotMsgSrvSelectA set of this object causes
MsgSrv configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.95 |
configSnapshotAlSrvSelectA set of this object causes
ActiveLeaseSrv configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.96 |
configSnapshotDhcpv6SrvSelectA set of this object causes
Dhcp6Srv configuration data to
be included in the snap-shot file generated
by the device.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.97 |
alcatelIND1ConfigMgrMIBConformanceBranch For Configuration Manager Subsystem Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.11.1.2 |
alcatelIND1ConfigMgrMIBGroupsBranch For Configuration Manager Subsystem Units Of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1 |
alcatelIND1ConfigMgrMIBCompliancesBranch For Configuration Manager Subsystem Compliance Statements. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.11.1.2.2 |