ALCATEL-IND1-BFD-MIB
AI MIB Summary
The ALCATEL-IND1-BFD-MIB enables SNMP-based configuration and monitoring of Bidirectional Forwarding Detection (BFD) session parameters and operational states on Alcatel-Lucent "Birds of Prey" product line hardware. It facilitates the management of BFD control packets, session establishment, and failure detection mechanisms to ensure rapid link failure identification within the network infrastructure.
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line Configuration of Bidirectional Forwarding detection(BFD) protocol parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1BfdMIB.1.3.6.1.4.1.6486.801.1.2.1.45.1
60
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
60 total| Object Name |
|---|
alcatelIND1BfdMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Configuration of Bidirectional Forwarding detection(BFD) protocol parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.45.1 |
alaBfdObjectsBranch for Bi-Directional forwarding detection
Subsystem managed objects OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.45.1.1 |
alaBfdGlobalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.1 |
alaBfdGlobalAdminStatusThe global administrative status of BFD in this
router.rw AlaBfdStatus .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.1.1 |
alaBfdGlobalTxIntervalThe object specifies the Desired Tx interval at which
BFD packets should be transmitted at global level.rw AlaBfdInterval .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.1.2 |
alaBfdGlobalRxIntervalThe object specifies the Min Rx interval at which BFD
packets should be transmitted at global level.rw AlaBfdInterval .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.1.3 |
alaBfdGlobalOperModeThe object specifies the operation mode at global
levelrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.1.4 |
alaBfdGlobalVersionNumberThe version number of the BFD protocol that this
session is running in.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.1.5 |
alaBfdGlobalL2HoldTimerThe object specifies the L2 convergence timer
value at global level.rw AlaBfdInterval .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.1.6 |
alaBfdGlobalProtocolsBFD Protocol status: Bits 0 - 3
bit 0 - OSPF enabled/disabled
bit 1 - BGP enabled/disabled
bit 2 - DVMRP enabled/disabled
bit 3 - VRRP enabled/disabledro Bits .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.1.7 |
alaBfdGlobalEchoObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.2 |
alaBfdGlobalEchoThe object specifies status of echo mode at global
level.rw AlaBfdStatus .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.2.1 |
alaBfdGlobalEchoRxIntervalThe object specifies the Echo Rx interval at which BFD
packets should be transmitted at global level.rw AlaBfdInterval .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.2.2 |
alaBfdIntfTableThe BFD Interface Table describes confiuration done over the
BFD interfaces. SEQUENCE OF AlaBfdIntfEntry .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3 |
alaBfdIntfEntryThe BFD interface Entry describes BFD interface. AlaBfdIntfEntry .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1 |
alaBfdIntfAddrTypeThis object specifies IP address type values
unknown(0), ipv4(1) or ipv6(2) have to be
supported. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.1 |
alaBfdIntfAddrThe address of the BFD interface configured InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.2 |
alaBfdIntfIndexThe Interface Index of the BFD interfacero InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.3 |
alabfdIntfAdminStatusThis object specifies the adminstatus of the
BFD interface.rw AlaBfdStatus .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.4 |
alaBfdIntfDesiredMinTxIntervalThe object specifies the Desired Tx interval at
which BFD packets should be transmitted at
interface level. Default interval is global
configured intervalrw AlaBfdInterval .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.5 |
alaBfdIntfReqMinRxIntervalThe object specifies the Min Rx interval at
which BFD packets should be transmitted at
interface level.Default interval is global
configured intervalrw AlaBfdInterval .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.6 |
alaBfdIntfOperModeThe object specifies the operation mode at
interface level. Default mode is global moderw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.7 |
alaBfdIntfEchoModeThe object specifies status of echo mode at
interface level.rw AlaBfdStatus .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.8 |
alaBfdIntfReqMinEchoRxIntervalThe object specifies the Echo Rx interval at
which BFD packets should be transmitted at
interface level. Default interval is global
configured intervalrw AlaBfdInterval .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.9 |
alaBfdIntfDetectMultThe object specifies the Detect multiplier at
interface level.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.10 |
alaBfdIntfsesstypeThe type of this BFD session corresponding to
this interface. Currently single hop supportedrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.11 |
alaBfdIntfAuthPresFlagThis object indicates that the local system's
desire to use Authentication. Specifically, it
is set to true(1) if the local system wishes the
session to be authenticated or false(0) if notrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.12 |
alaBfdIntfAuthenticationTypeThe Authentication Type used for this BFD
session. This field is valid only when the
Authentication Present bit is setrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.13 |
alaBfdIntfL2HoldTimerThe object configures layer 2 convergence
timerrw AlaBfdInterval .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.14 |
alaBfdIntfRowStatusThis variable is used to create, modify, and/or
delete a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.15 |
alaBfdSessTableThe BFD Session Table describes the BFD sessions. SEQUENCE OF AlaBfdSessEntry .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4 |
alaBfdSessEntryThe BFD Session Entry describes BFD session. AlaBfdSessEntry .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1 |
alaBfdSessDiscriminatorThis object specifies the local discriminator
for this BFD session, used to uniquely identify it. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.1 |
alaBfdSessNeighborAddrTypeThis object specifies IP address type values
unknown(0), ipv4(1) or ipv6(2) have to be
supported.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.2 |
alaBfdSessNeighborAddrThis object specifies the neighbor IpAddress.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.3 |
alaBfdSessRemoteDiscrThis object specifies the local discriminator
for this BFD session, used to uniquely identify
it.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.4 |
alaBfdSessUdpPortThe destination UDP Port for BFD. The default
value is the well-known value for this port.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.5 |
alaBfdSessStateThe perceived state of the BFD session.BFD
State failing(5) is only applicable if this BFD
session is running version 0.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.6 |
alaBfdSessRemoteHeardFlagThis object specifies status of BFD packet
reception from the remote system. Specifically,
it is set to true(1) if the local system is
actively receiving BFD packets from the remote
system, and is set to false(0) if the local
system has not received BFD packets recently
(within the detection time) or if the local
system is attempting to tear down the BFD
session. Value placed in this object is valid
only if this session is running in BFD
version 0.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.7 |
alaBfdSessDiagA diagnostic code specifying the local system's
reason for the last transition of the session
from up(4)to some other state.ro AlaBfdDiag .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.8 |
alaBfdSessOperModeThis object specifies current operating mode
that BFD session is operating in.
A value of AsyncMode(1) ...
A value of DemandMode(2) ...ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.9 |
alaBfdSessEchoFuncModeDesiredFlagThis object indicates that the local system's
desire to use Echo mode. Specifically, it is set
to true(1) if the local system wishes to use
Echo mode or false(0) if notro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.10 |
alaBfdSessControlPlanIndepFlagThis object indicates that the local system's
ability to continue to function through a
disruption of the control plane. Specifically,
it is set to true(1) if the local system BFD
implementation independent of the control plane.
Otherwise, the value is set to false(0)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.11 |
alaBfdSessInterfaceThis object contains an interface index used
to indicate the interface which this BFD
session is running on. This value can be zero
if there are no interface associated
with this BFD sessionro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.12 |
alaBfdSessNegotiatedTxIntervalThis object specifies the minimum interval, in
milliseconds, that the local system will
transmit BFD Control packets.ro AlaBfdInterval .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.13 |
alaBfdSessNegotiatedRxIntervalThis object specifies the minimum interval, in
milliseconds, that the local system will
Receive BFD Control packets.ro AlaBfdInterval .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.14 |
alaBfdSessProtocolsBFD Protocol status: Bits 0 - 3
bit 0 - OSPF enabled/disabled
bit 1 - BGP enabled/disabled
bit 2 - DVMRP enabled/disabled
bit 3 - VRRP enabled/disabled
bit 4 - IPRM enabled/disabledro Bits .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.15 |
alaBfdSessPerfTableThis table specifies BFD Session performance counters. SEQUENCE OF AlaBfdSessPerfEntry .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.5 |
alaBfdSessPerfEntryAn entry in this table is created by a BFD-enabled node
for every BFD Session. bfdCounterDiscontinuityTime is
used to indicate potential discontinuity for all counter
objects in this table. AlaBfdSessPerfEntry .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.5.1 |
alaBfdSessPerfPktInThe total number of BFD messages received for this BFD
session.ro Counter64 .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.5.1.1 |
alaBfdSessPerfPktOutThe total number of BFD messages sent for this BFD
session.ro Counter64 .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.5.1.2 |
alaBfdSessPerfEchoOutThe total number of BFD Echo messages sent for this BFD
session.ro Counter64 .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.5.1.3 |
alaBfdSessPerfUpTimeThe value of sysUpTime on the most recent occasion at
which the session came up. If no such up event exists
this object contains a zero value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.5.1.4 |
alaBfdSessPerfLastSessDownTimeThe value of sysUpTime on the most recent occasion at
which the last time communication was lost with the
neighbor. If no such down event exist this object
contains a zero value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.5.1.5 |
alaBfdSessPerfLastCommLostDiagThe BFD diag code for the last time communication was
lost with the neighbor. If no such down event exists
this object contains a zero value.ro AlaBfdDiag .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.5.1.6 |
alaBfdSessPerfSessUpCountThe number of times this session has gone into the Up
state since the router last rebooted.ro Counter64 .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.5.1.7 |
alaBfdSessPerfDiscTimeThe value of sysUpTime on the most recent occasion at
which any one or more of the session counters suffered
a discontinuity.The relevant counters are the specific
instances associated with this BFD session of any
Counter64 object contained in the BfdSessPerfTable.
If no such discontinuities have occurred since the last
re-initialization of the local management subsystem,
then this object contains a zero value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.5.1.8 |
alcatelIND1BfdMIBConformanceConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.45.1.2 |
alcatelIND1BfdMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.45.1.2.1 |
alcatelIND1BfdMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.45.1.2.2 |