ALCATEL-IND1-AUTO-FABRIC-MIB
AI MIB Summary
The ALCATEL-IND1-AUTO-FABRIC-MIB module enables monitoring and configuration of LACP, Shortest Path Bridging (SPB), and Multiple VLAN Registration Protocol (MVRP) parameters within Alcatel-Lucent's Birds of Prey product line. It provides enterprise-specific visibility into automatic fabric discovery and link aggregation states for Alcatel-Ind1 network infrastructure.
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line AUTOFABRIC for automatic detection and configuration of LACP, SPB and MVRP.
The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1AUTOFABRICMIB.1.3.6.1.4.1.6486.801.1.2.1.75.1
23
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
23 total| Object Name |
|---|
alcatelIND1AUTOFABRICMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
AUTOFABRIC for automatic detection and configuration of LACP, SPB and MVRP.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.75.1 |
alcatelIND1AUTOFABRICMIBObjectsBranch For AUTO-FABRIC
Subsystem Managed Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.75.1.1 |
alaAutoFabricGlobalStatusThis variable is used to enable or diable Autofabric on the switch.
The value enable (1) indicates that Autofabric should be enabled on
the switch. The value disable (2) is used to disable Autofabric on
the switch. By default, Autofabric is enabled on the switch.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.1 |
alaAutoFabricGlobalDiscoveryDefines the global discovery window control for Autofabric.
The value restart (2) indicates that Autofabric should restart
global discovery window.
By default, this object contains a zero value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.2 |
alaAutoFabricGlobalLACPProtocolStatusThis variable is used to enable or diable AutoFabric LACP discovery.
on the switch. The value enable (1) indicates that during discovery
the switch will attempt to create LACP link aggregates. The value
disable (2) indicates that there would be no attempt to create LACP
link aggregates during the discovery phase. By default LACP is enabled
on the switchrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.3 |
alaAutoFabricGlobalSPBProtocolStatusThis variable is used to enable or diable AutoFabric SPB discovery.
on the switch. The value enable (1) indicates that during discovery
the switch will attempt to create SPB adjacencies. The value
disable (2) indicates that there would be no attempt to create SPB
adjacencies during the discovery phase. By default SPB is enabled
on the switchrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.4 |
alaAutoFabricGlobalMVRPProtocolStatusThis variable is used to enable or diable AutoFabric MVRP discovery.
on the switch. The value enable (1) indicates that during discovery
the switch will enable MVRP and attempt to propagate and learn VLANs.
The value disable (2) indicates that MVRP would not be enabled in
discovery phase. By default MVRP is enabled on the switchrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.5 |
alaAutoFabricGlobalConfigSaveTimerMaximum period of time after which configuration built up by AutoFabric
would get written to the boot.cfg or vcboot.cfg.
The range supported is 60-3600 seconds.rw Unsigned32 ( 60 .. 3600 ) UNITS "seconds" .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.6 |
alaAutoFabricGlobalConfigSaveTimerStatusThis variable is used to enable or diable AutoFabric config save
timer on the switch. The value enable (1) indicates that
after the expiry of the config save timer, all AutoFabric
configurations would get written to the boot.cfg ot the vcboot.cfg
The value disable (2) would disable the config save timer.
By default it is enabledrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.7 |
alaAutoFabricGlobalDiscoveryTimerThis variable is used to specify auto-fabric auto
discovery interval, zero disables it, configurable
Value is from 1 to 3600 minutes.rw Unsigned32 ( 1 .. 3600 ) UNITS "Minutes" .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.8 |
alaAutoFabricPortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9 |
alaAutoFabricPortConfigTableA table containing Autofabric port configuration information. SEQUENCE OF AlaAutoFabricPortConfigEntry .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1 |
alaAutoFabricPortConfigEntryAn AutoFabric port configuration entry. AlaAutoFabricPortConfigEntry .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1 |
alaAutoFabricPortConfigIfIndexThe ifindex of the port on which AutoFabric is running InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.1 |
alaAutoFabricPortConfigStatusThis variable is used to enable or diable AutoFabric on the interface.
The value enable (1) indicates that AutoFabric should be enabled on
the interface. The value disable (2) is used to disable AutoFabric on
the interface. By default, AutoFabric is enabled on the interface.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.2 |
alaAutoFabricPortLACPProtocolStatusThis variable is used to enable LACP in the AutoFabric discovery
on this port. The value enable (1) indicates during discovery window
this port will attempt to form LACP link aggregates. The value disable (2)
indicates this port will not participate in LACP discovery phase.
By default it is enabledrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.3 |
alaAutoFabricPortSPBProtocolStatusThis variable is used to enable SPB in the AutoFabric discovery
on this port. The value enable (1) indicates during discovery window
this port will attempt to form SPB adjacencies. The value disable (2)
indicates this port will not participate in SPB discovery phase.
By default it is enabledrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.4 |
alaAutoFabricPortMVRPProtocolStatusThis variable is used to enable MVRP in the AutoFabric discovery
on this port. The value enable (1) indicates during discovery window
this port will enable MVRP and attempt to learn and propagate VLANs.
The value disable (2) indicates this port will not participate in MVRP
discovery phase.
By default it is enabledrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.5 |
alaAutoFabricPortStatusThe state of the Autofabric discovery window on the port.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.9.1.1.6 |
alaAutoFabricRemoveGlobalConfigThis variable is used to remove the auto fabric global configuration when the user chooses to disable auto fabricrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.75.1.1.10 |
alcatelIND1AUTOFABRICMIBConformanceBranch for AUTOFABRIC Module MIB Subsystem Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.75.1.2 |
alcatelIND1AUTOFABRICMIBGroupsBranch for AUTOFABRIC Module MIB Subsystem Units of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.75.1.2.1 |
alcatelIND1AUTOFABRICMIBCompliancesBranch for AUTOFABRIC Module MIB Subsystem Compliance Statements. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.75.1.2.2 |