ALC-OPT-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ALC-OPT-MIB.
227
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
227 total| Object Name |
|---|
codex OBJECT IDENTIFIER .1.3.6.1.4.1.449 |
RFC1155-SMI Unknown .1.3.6.1.4.1.449 |
cdxProductSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.449.2 |
cdx6500 OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1 |
cdx6500Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2 |
cdx6500CfgProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1 |
cdx6500PCTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1 |
cdx6500PPCTALCCfgTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1.27 |
cdx6500PPCTALCPortTableThis table contains ALC Port configuration parameters SEQUENCE OF Cdx6500PPCTALCPortEntry .1.3.6.1.4.1.449.2.1.2.1.1.27.1 |
cdx6500PPCTALCPortEntryEntries in the ALC Port Configuration Table. Cdx6500PPCTALCPortEntry .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1 |
alcPCfgPortNumberPort number of this port.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.1 |
alcPCfgPortTypePort Type of this port.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.2 |
alcPCfgSubtypeThis is the ALC port subtype.
alcHpad - Host PAD.
alcTpad - Terminal PAD.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.3 |
alcPCfgPortControlSpecify any of the following port control options:
simp : Simple connection with no control signal handshake.
dtr : Connection with DTR control signal handshake.
emri : Port emulates a modem and does dial-in/out handshake
with RI.
emdc : Port emulates a modem and does dial-in/out handshake
with DCD.
alcDte : DTE emulation with RTS/CTS handshake.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.4 |
alcPCfgClockSourceint : Internal clock source.
ext : External clock source.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.5 |
alcPCfgClockSpeedThis is the speed of the port in bits per second,
when using internal clocking.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.6 |
alcPCfgPollDelayTimerThis is the delay in milliseconds to impose between poll
cycles if no interchanges are polled. Valid on TPAD lines
only.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.7 |
alcPCfgHostTimeoutOn a poll coerced line, the host is considered to be down
if a poll is not received within this time, specified in
milliseconds. Valid on HPAD lines only.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.8 |
alcPCfgMaxMesgSizeThis specifies the maximum size of messages that can be sent
or received on this line excluding padding characters. TPAD
may receive multiple messages in a frame, HPAD may transmit
multiple messages in a frame.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.9 |
alcPCfgMinIntrvlBetweenPollsThe minimum length of time, in milliseconds, between polls
issued on this line. Valid on TPAD lines only.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.10 |
alcPCfgRtsCtsTimeoutThe time in milliseconds, within which CTS must be raised
following the RTS signal.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.11 |
alcPCfgLeadPadCharThis is the character to use when inserting leading padding
characters.ro OCTET STRING .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.12 |
alcPCfgNumLeadPadCharsThis is the number of leading padding characters to use.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.13 |
alcPCfgTrailPadCharThis is the character to use when inserting trailing padding
characters.ro OCTET STRING .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.14 |
alcPCfgNumTrailPadCharsThis is the number of trailing padding characters to use.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.15 |
alcPCfgALCLineOptionsSelect options on this ALC port as follows:
NONE : no option specified
EMB_SYNC : Sychronization characters are inserted between
messages in the same frame.
MASK8 : Indicates that the `8' bit is treated as zero
when examining interchange addresses on this line.
COERCE : Poll coercion is used.
CLASH : Poll responses will be aborted if a poll is
received whilst a response to a previous poll is
being transmitted.
RFRTM : Responses will be generated to Response and
Forward RTM messages.
RZRTM : Responses will be generated to enquiry RTM
messages.
SOFT_SYNC : Selects software synchronization.
NULLS : Nulls are allowed in the data stream.
BACKTOBACK : Frames may be received back to back.
Any combination of the above maybe specified by summing
(e.g. NULLS+BACKTOBACK. . .).ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.16 |
alcPCfgConnTypenone : No connection.
x25 : Connection type is X.25.
nc : Skipped during configurationro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.17 |
alcPCfgAcallMnemonicThis is the mnemonic to be used to establish the call when
the call request is issued. The mnemonic must be defined in
the mnemonic table. If no mnemonic is specified, ALP PAD will
wait for the call. It consists of 0-8 alphanumeric characters,
and the space character is used to blank the field.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.18 |
alcPCfgCallingAddressThe calling address to be used in outbound calls. It consists
of 0-15 BCD digits, and the space character is used to blank
the field.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.19 |
alcPCfgCUDThe Call User Data field to be used in outbound calls. It
consists of a list of up to 16 hexadecimal numbers between 0
and FF, separated by commas.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.20 |
alcPCfgNumOfBuffersThis defines the number of buffers that are available for data
transfer in each direction. Each buffer will hold one message.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.21 |
alcPCfgInHeaderThis data is assumed to be at the start of all messages
received from X.25. If IA and/or TA are specified in the
header, the values associated with these positions are
checked against the IA and TA associated with the header is
then removed from the message, and replaced by the IA and
TA associated with the connection.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.22 |
alcPCfgOutHeaderThis data is prefixed to all messages sent to X.25. If IA
and/or TA are specified in the header, the IA and TA
associated with the connection are inserted into the
outgoing message at the positions specified by the header.
The IA and TA received from ALC are removed and replaced with
the OUT Header.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.23 |
alcPCfgReconnectTimeoutThe time in seconds between attempts to establish an X.25
virtual circuit when the ALP connection is enabled, or after
the SVC has been cleared.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.24 |
alcPCfgInactivityTimeoutThe time in seconds after which the call is cleared if no
data is transmitted or received. A value of 0 disables the
timer.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.25 |
alcPCfgDebounceTimeoutThis defines the time in seconds for which the PAD waits
before implementing the shutdown action. If the time out is 0,
shutdown occurs immediately.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.26 |
alcPCfgParitynone : No parity will be used.
odd : All messages sent to X.25 will have odd parity.
nc : Skipped during configurationro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.27 |
alcPCfgConnOptionsOptions controlling the behaviour of the connection.
NONE : No options are specified.
HDR : ALP PAD discards all data messages incoming from the
network in which the constant parts of the IN Header
do not match the header of the message.
ALCSD : If this option is specified and the SVC goes down,
then the ALC entity is shutdown.
CSD : If this option is specified and the ALC entity goes
down, then the associated call is cleared.
FLOW : If the number of free buffers decreases to 20% of
its maximum, then flow control is imposed on the
receiver. It is released when the number of free
buffers reaches 50% of its maximum. If the option
is not set, messages received when there are no
buffers available will be discarded. Note that
flow control requests from X.25 are always acted
upon, regardless of the setting of this option.
USE_ADDR : The address in the received message is used when
the message is passed to ALC, and address checking
is turned off.
Any combination of the above maybe specified by summing
(e.g. FLOW+USE_ADDR+. . .).ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.28 |
alcPCfgAvailableMesgThis specifies the text of a message that is broadcast
to the ALC entity associated with this connection after
a message from that terminal has been discarded due to
the X.25 VC being down. This message is only sent
if an Unavailable message has previously been sent to one
of the terminals associated with this connection.
If no message is defined, none is sent.
The space character is used to blank this field.
Note that this is only used on TPAD configurations.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.29 |
alcPCfgUnavailableMesgThis specifies the text of a message that is sent to a
terminal when a message from that terminal is discarded
because the X.25 VC is down. If no message is defined,
none is sent.
The space character is used to blank this field.
Note that this is only used on TPAD configurations.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.1.1.30 |
cdx6500PPCTALCInterchangeTableThis table contains ALC Interchange configuration parameters SEQUENCE OF Cdx6500PPCTALCInterchangeEntry .1.3.6.1.4.1.449.2.1.2.1.1.27.2 |
cdx6500PPCTALCInterchangeEntryEntries in the ALC Interchange Configuration Table. Cdx6500PPCTALCInterchangeEntry .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1 |
alcICfgPortNumberPort number of this port.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.1 |
alcICfgInterchangeAddressThe address of the interchange.
Addresses 0D,0F,1D,2D,3D and 3F are illegal as they are used
as line control characters.ro OCTET STRING .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.2 |
alcICfgOptionOnInvalidCCCThe action to be taken on receipt of a message with an
invalid ccc.
discard : Discard the message
ignore : Treat the message as correct.
reenter : (TPAD only) The configured `re-enter' message is
sent to the terminal.
resend : (TPAD only) A resend request message is sent to the
terminal.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.3 |
alcICfgGenTerminalAddressSpecifies the terminal address to which broadcast messages are
sent when the GTA option is specified.ro OCTET STRING .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.4 |
alcICfgHostTimeoutThe host is considered to be down if a poll is not received
within this period, which is specified in milliseconds.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.5 |
alcICfgMaxComponentsPerFrameSpecifies the maximum number of message segments transmitted
in one frame (HPAD) or expected in one frame (TPAD).ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.6 |
alcICfgFastPollCycleCountThe polling rate for an interchange in fast poll.
A poll is issued to this interchange once in every n poll
cycles on the line.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.7 |
alcICfgSlowPollCycleCountThe polling rate for an interchange in slow poll.
One slow poll IA is polled every n poll cycles on the line.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.8 |
alcICfgN1CounterThe number of polls that can be sent without receiving a
response before the interchange enters slow poll.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.9 |
alcICfgN2CounterThe number of good poll responses required before the
interchange enters fast poll.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.10 |
alcICfgT1TimeoutThe time, in milliseconds, within which an interchange must
start responding to a poll.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.11 |
alcICfgT2TimeoutThe time, in milliseconds, within which an interchange must
complete its transmission.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.12 |
alcICfgReenterMessageThis specifies the text of a message sent to terminals when
a message with an incorrect ccc is received and the action on
receipt of an invalid ccc is REENTER. Note that some terminals
may require control characters at the start of the message.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.13 |
alcICfgStartMessageThis specifies the text of a message sent to terminals when
polling of this interchange is started and the STST option is
configured. Note that some terminals may require control
characters at the start of the message.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.14 |
alcICfgStopMessageThis specifies the text of a message sent to terminals when
polling of this interchange is stopped and the STST option is
configured. Note that some terminals may require control
characters at the start of the message.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.15 |
alcICfgOptionsSelect options on this ALC Interchange as follows :
NONE : no option specified
GTA : (TPAD only) Indicates that there is a general
terminal address which may be used for broadcasting
to all terminals on the interchange.
NOPOLL : (TPAD only) Indicates that this interchange is not to
be polled.
RESET : Indicates that the interchange is capable of handling
ALC Reset messages.
STST : (TPAD only) Indicates that the configured start and
stop messages should be transmitted when polling is
started or stopped.
Any combination of the above maybe specified by summing
(e.g. GTA+NOPOLL+. . .).ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.16 |
alcICfgValidTAListA list of hexadecimal numbers between 1 and 3F separated by
commas. /f or /r after each is used to indicate forward or
reverse abort respectively. Ranges may be specified by
separating two addresses by a dash `-'.
Note that the addresses 0D, 1D, 2D, 3D and 3F are illegal.
The list of terminal addresses that may be configured on the
line, including the forward or reverse abort settings for each
terminal.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.17 |
alcICfgConnTypenone : No connection.
x25 : Connection type is X.25.
nc : Skipped during configurationro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.18 |
alcICfgAcallMnemonicThis is the mnemonic to be used to establish the call when
the call request is issued. The mnemonic must be defined in
the mnemonic table. If no mnemonic is specified, ALP PAD will
wait for the call. It consists of 0-8 alphanumeric characters,
and the space character is used to blank the field.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.19 |
alcICfgCallingAddressThe calling address to be used in outbound calls. It consists
of 0-15 BCD digits, and the space character is used to blank
the field.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.20 |
alcICfgCUDThe Call User Data field to be used in outbound calls. It
consists of a list of up to 16 hexadecimal numbers between 0
and FF, separated by commas.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.21 |
alcICfgNumOfBuffersThis defined the number of buffers that are available for data
transfer in each direction. Each buffer will hold one message.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.22 |
alcICfgInHeaderThis data is assumed to be at the start of all messages
received from X.25. If IA and/or TA are specified in the
header, the values associated with these positions are
checked against the IA and TA associated with the header is
then removed from the message, and replaced by the IA and
TA associated with the connection.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.23 |
alcICfgOutHeaderThis data is prefixed to all messages sent to X.25. If IA
and/or TA are specified in the header, the IA and TA
associated with the connection are inserted into the
outgoing message at the positions specified by the header.
The IA and TA received from ALC are removed and replaced with
the OUT Header.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.24 |
alcICfgReconnectTimeoutThe time in seconds between attempts to establish an X.25
virtual circuit when the ALP connection is enabled, or after
the SVC has been cleared.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.25 |
alcICfgInactivityTimeoutThe time in seconds after which the call is cleared if no
data is transmitted or received. A value of 0 disables the
timer.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.26 |
alcICfgDebounceTimeoutThis defines the time in seconds for which the PAD waits
before implementing the shutdown action. If the time out is 0,
shutdown occurs immediately.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.27 |
alcICfgParitynone : No parity will be used.
odd : All messages sent to X.25 will have odd parity.
nc : Skipped during configurationro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.28 |
alcICfgConnOptionsOptions controlling the behaviour of the connection.
NONE : No options are specified.
HDR : ALP PAD discards all data messages incoming from the
network in which the constant parts of the IN Header
do not match the header of the message.
ALCSD : If this option is specified and the SVC goes down,
then the ALC entity is shutdown.
CSD : If this option is specified and the ALC entity goes
down, then the associated call is cleared.
FLOW : If the number of free buffers decreases to 20% of
its maximum, then flow control is imposed on the
receiver. It is released when the number of free
buffers reaches 50% of its maximum. If the option
is not set, messages received when there are no
buffers available will be discarded. Note that
flow control requests from X.25 are always acted
upon, regardless of the setting of this option.
USE_ADDR : The address in the received message is used when
the message is passed to ALC, and address checking
is turned off.
Any combination of the above maybe specified by summing
(e.g. FLOW+USE_ADDR+. . .).ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.29 |
alcICfgAvailableMesgThis specifies the text of a message that is broadcast
to the ALC entity associated with this connection after
a message from that terminal has been discarded due to
the X.25 VC being down. This message is only sent
if an Unavailable message has previously been sent to one
of the terminals associated with this connection.
If no message is defined, none is sent.
The space character is used to blank this field.
Note that this is only used on TPAD configurations.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.30 |
alcICfgUnavailableMesgThis specifies the text of a message that is sent to a
terminal when a message from that terminal is discarded
because the X.25 VC is down. If no message is defined,
none is sent.
The space character is used to blank this field.
Note that this is only used on TPAD configurations.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.2.1.31 |
cdx6500PPCTALCTerminalTableThis table contains ALC Terminal configuration parameters SEQUENCE OF Cdx6500PPCTALCTerminalEntry .1.3.6.1.4.1.449.2.1.2.1.1.27.3 |
cdx6500PPCTALCTerminalEntryEntries in the ALC Terminal Configuration Table. Cdx6500PPCTALCTerminalEntry .1.3.6.1.4.1.449.2.1.2.1.1.27.3.1 |
alcTCfgPortNumberPort number of this port.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.1 |
alcTCfgInterchangeAddressThe address of the interchange.
Addresses 0D,0F,1D,2D,3D and 3F are illegal as they are used
as line control characters.ro OCTET STRING .1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.2 |
alcTCfgTerminalAddressAddress identifying this terminal.ro OCTET STRING .1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.3 |
alcTCfgConnTypenone : No connection type.
x25 : Connection type is X.25.
nc : Skipped during configurationro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.4 |
alcTCfgAcallMnemonicThis is the mnemonic to be used to establish the call when
the call request is issued. The mnemonic must be defined in
the mnemonic table. If no mnemonic is specified, ALP PAD will
wait for the call. It consists of 0-8 alphanumeric characters,
and the space character is used to blank the field.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.5 |
alcTCfgCallingAddressThe calling address to be used in outbound calls. It consists
of 0-15 BCD digits, and the space character is used to blank
the field.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.6 |
alcTCfgCUDThe Call User Data field to be used in outbound calls. It
consists of a list of up to 16 hexadecimal numbers between 0
and FF, separated by commas.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.7 |
alcTCfgNumOfBuffersThis defined the number of buffers that are available for data
transfer in each direction. Each buffer will hold one message.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.8 |
alcTCfgInHeaderThis data is assumed to be at the start of all messages
received from X.25. If IA and/or TA are specified in the
header, the values associated with these positions are
checked against the IA and TA associated with the header is
then removed from the message, and replaced by the IA and
TA associated with the connection.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.9 |
alcTCfgOutHeaderThis data is prefixed to all messages sent to X.25. If IA
and/or TA are specified in the header, the IA and TA
associated with the connection are inserted into the
outgoing message at the positions specified by the header.
The IA and TA received from ALC are removed and replaced with
the OUT Header.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.10 |
alcTCfgReconnectTimeoutThe time in seconds between attempts to establish an X.25
virtual circuit when the ALP connection is enabled, or after
the SVC has been cleared.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.11 |
alcTCfgInactivityTimeoutThe time in seconds after which the call is cleared if no
data is transmitted or received. A value of 0 disables the
timer.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.12 |
alcTCfgDebounceTimeoutThis defines the time in seconds for which the PAD waits
before implementing the shutdown action. If the time out is 0,
shutdown occurs immediately.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.13 |
alcTCfgParitynone : No parity will be used.
odd : All messages sent to X.25 will have odd parity.
nc : Skipped during configurationro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.14 |
alcTCfgConnOptionsOptions controlling the behaviour of the connection.
NONE : No options are specified.
HDR : ALP PAD discards all data messages incoming from the
network in which the constant parts of the IN Header
do not match the header of the message.
ALCSD : If this option is specified and the SVC goes down,
then the ALC entity is shutdown.
CSD : If this option is specified and the ALC entity goes
down, then the associated call is cleared.
FLOW : If the number of free buffers decreases to 20% of
its maximum, then flow control is imposed on the
receiver. It is released when the number of free
buffers reaches 50% of its maximum. If the option
is not set, messages received when there are no
buffers available will be discarded. Note that
flow control requests from X.25 are always acted
upon, regardless of the setting of this option.
USE_ADDR : The address in the received message is used when
the message is passed to ALC, and address checking
is turned off.
Any combination of the above maybe specified by summing
(e.g. FLOW+USE_ADDR+. . .).ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.15 |
alcTCfgAvailableMesgThis specifies the text of a message that is broadcast
to the ALC entity associated with this connection after
a message from that terminal has been discarded due to
the X.25 VC being down. This message is only sent
if an Unavailable message has previously been sent to one
of the terminals associated with this connection.
If no message is defined, none is sent.
The space character is used to blank this field.
Note that this is only used on TPAD configurations.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.16 |
alcTCfgUnavailableMesgThis specifies the text of a message that is sent to a
terminal when a message from that terminal is discarded
because the X.25 VC is down. If no message is defined,
none is sent.
The space character is used to blank this field.
Note that this is only used on TPAD configurations.ro DisplayString .1.3.6.1.4.1.449.2.1.2.1.1.27.3.1.17 |
cdx6500Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3 |
cdx6500StatProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1 |
cdx6500PSTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1 |
cdx6500PPSTALCStatsTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1.28 |
cdx6500PPSTALCPortTableThis table contains ALC Port Statistics parameters. SEQUENCE OF Cdx6500PPSTALCPortEntry .1.3.6.1.4.1.449.2.1.3.1.1.28.1 |
cdx6500PPSTALCPortEntryEntries in the ALC Port Statistics Table. Cdx6500PPSTALCPortEntry .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1 |
alcPStatsPortNumberPort number of this port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.1 |
alcPStatsPortTypePort type of this port.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.2 |
alcPStatsPortStateCurrent Port State.
connecting:The line has been enabled by the operator,
but polling has not yet been established.
online :The line is active.
offline :The line has been disabled by the operator.
pending :The line is inactive because of conditions
detected by ALP PAD (X.25 virtual circuit not
active).
timedOut :The line is not being polled. This will be
displayed on poll coerced HPAD lines only.
flowCtrl :The application (ALP PAD) has imposed flow
control on the line.
na :Value not Availablero Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.3 |
alcPStatsFramesInNumber of frames received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.4 |
alcPStatsFramesOutNumber of frames transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.5 |
alcPStatsDataMesgsInNumber of data messages received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.6 |
alcPStatsDataMesgsOutNumber of data messages transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.7 |
alcPStatsCharsInNumber of characters received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.8 |
alcPStatsCharsOutNumber of characters transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.9 |
alcPStatsPollsNumber of polls transmitted or received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.10 |
alcPStatsGAsNumber of Go Ahead messages transmitted or received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.11 |
alcPStatsResetsNumber of Reset messages transmitted or received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.12 |
alcPStatsDiscardBadIAInNumber of received messages discarded due to bad
Interchange Address.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.13 |
alcPStatsDiscardBadIAOutNumber of transmitted messages discarded due to bad
Interchange Address.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.14 |
alcPStatsMaxQSizeOutMaximum transmit queue size.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.15 |
alcPStatsCCCErrorsNumber of messages received with an invalid checksum.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.16 |
alcPStatsSignalLossesNumber of Signal Losses.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.17 |
alcPStatsOverlengthFramesNumber of overlength frames received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.18 |
alcPStatsPortStatusCurrent Port Status.
na :Value not Availablero Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.19 |
alcPStatsConnStateCurrent state of the connection.
online :The connection is available for data transfer.
offline :The connection has been disabled by an operator.
connecting:The ALP PAD is attempting to make the X.25
virtual circuit available for use.
inactive :The inactivity timer has expired, so the virtual
circuit has been dropped. Data received from ALC
will cause the connection to be re-established.
pending :The CSD option has been configured and the ALC
entity is currently down; hence the ALP PAD has
disabled the virtual circuit.
na :Value not Availablero Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.20 |
alcPStatsALCMesgsInThe number of messages received from ALC.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.21 |
alcPStatsALCMesgsOutThe number of messages transmitted to ALC.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.22 |
alcPStatsX25MesgsInThe number of messages received from X.25.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.23 |
alcPStatsX25MesgsOutThe number of messages transmitted to X.25.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.24 |
alcPStatsALCCharsInThe number of characters received from ALC.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.25 |
alcPStatsALCCharsOutThe number of characters transmitted to ALC.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.26 |
alcPStatsX25CharsInThe number of characters received from X.25.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.27 |
alcPStatsX25CharsOutThe number of characters transmitted to X.25.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.28 |
alcPStatsALCDiscardedMesgsEntityDownThe number of messages received by ALC for which the
destination entity is unable to process the data.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.29 |
alcPStatsX25DiscardedMesgsEntityDownThe number of messages received by X.25 for which the
destination entity is unable to process the data.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.30 |
alcPStatsX25DiscardedMesgsBadALCAddrThe number of messages received from X.25 for which the
addresses specified do not match those associated with
the connection.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.31 |
alcPStatsX25DiscardedMesgsBadHeaderThe number of messages received by X.25 of which the IN
header configured does not match the header present in the
message.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.32 |
alcPStatsX25DiscardedMesgsTooLongThe number of messages received from X.25 that were discarded
because they were longer than the allowable ALC maximum
configured.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.33 |
alcPStatsALCDiscardedMesgsQFullThe number of messages discarded because the ALC outbound
message queue was full.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.34 |
alcPStatsX25DiscardedMesgsQFullThe number of messages discarded because the X.25 outbound
message queue was full.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.35 |
alcPStatsCurrTxALCQSizeThe number of messages currently queued in the ALC
outbound message queue for transmission.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.36 |
alcPStatsCurrTxX25QSizeThe number of messages currently queued in the X.25
outbound message queue for transmission.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.37 |
alcPStatsMaxTxALCQSizeThe maximum (highwater mark) size of the ALC outbound
queue so far.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.38 |
alcPStatsMaxTxX25QSizeThe maximum (highwater mark) size of the X.25 outbound
queue so far.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.28.1.1.39 |
cdx6500PPSTALCInterchangeTableThis table contains ALC Interchange Statistics parameters. SEQUENCE OF Cdx6500PPSTALCInterchangeEntry .1.3.6.1.4.1.449.2.1.3.1.1.28.2 |
cdx6500PPSTALCInterchangeEntryEntries in the ALC Interchange Statistics Table. Cdx6500PPSTALCInterchangeEntry .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1 |
alcIStatsPortNumberPort number of this port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.1 |
alcIStatsInterchangeAddressThe address of the interchange.
Addresses 0D,0F,1D,2D,3D and 3F are illegal as they are used
as line control characters.ro OCTET STRING .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.2 |
alcIStatsInterchangeStateCurrent State of this Interchange.
online :The interchange is active. This is displayed for
HPAD interchanges, and TPAD interchanges configured
as NOPOLL, only.
offline :The interchange has been disabled by the operator.
pending :The interchange is inactive because of conditions
detected by the application (ALP PAD).
failed :The line with which this interchange is associated
is down.
timedOut:The interchange is not being polled. This is
displayed for HPAD interchanges on non poll-coerced
lines only.
flowCtrl:The application (ALP PAD) has imposed flow control
on the interchange.
stopped :The line with which this interchange is associated
is in the FLOW CONTROL state. This is valid for
TPAD interchanges only.
slowPoll:The interchange is in slow poll.
fastPoll:The interchange is in fast poll.
na :Value not Availablero Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.3 |
alcIStatsFramesInNumber of ALC frames received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.4 |
alcIStatsFramesOutNumber of ALC frames transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.5 |
alcIStatsDataMesgsInNumber of ALC data messages received.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.6 |
alcIStatsDataMesgsOutNumber of ALC data messages transmitted.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.7 |
alcIStatsCharsInTotal number of characters received, excluding
synchronization characters.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.8 |
alcIStatsCharsOutTotal number of characters transmitted, excluding
synchronization characters.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.9 |
alcIStatsPollsThe number of poll messages transmitted for a line
defined as a TPAD. The number received for one
defined as HPAD.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.10 |
alcIStatsGAsThe number of Go Ahead messages transmitted for a line
defined as HPAD. The number received for one defined
as TPAD.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.11 |
alcIStatsResetsThe number of Reset messages transmitted for a line defined
as TPAD. The number received for one defined as HPAD.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.12 |
alcIStatsDiscardBadTAInThe number of received messages discarded because the Terminal
Address was not defined.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.13 |
alcIStatsDiscardBadTAOutThe number of transmitted messages discarded because the
Terminal Address was not defined.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.14 |
alcIStatsDisabledIAInThe number of received messages discarded because the
Interchange was disabled.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.15 |
alcIStatsDisabledIAOutThe number of transmitted messages discarded because the
Interchange was disabled.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.16 |
alcIStatsMaxQSizeOutMaximum number of frames queued for transmission.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.17 |
alcIStatsCCCErrorsNumber of messages received with an invalid checksum.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.18 |
alcIStatsT1TimeoutsNumber of T1 timer expirations. This is defined for TPAD
only.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.19 |
alcIStatsT2TimeoutsNumber of T2 timer expirations. This is defined for TPAD
only.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.20 |
alcIStatsConnStateCurrent state of the connection.
online :The connection is available for data transfer.
offline :The connection has been disabled by an operator.
connecting:The ALP PAD is attempting to make the X.25
virtual circuit available for use.
inactive :The inactivity timer has expired, so the virtual
circuit has been dropped. Data received from ALC
will cause the connection to be re-established.
pending :The CSD option has been configured and the ALC
entity is currently down; hence the ALP PAD has
disabled the virtual circuit.
na :Value not Availablero Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.21 |
alcIStatsALCMesgsInThe number of messages received from ALC.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.22 |
alcIStatsALCMesgsOutThe number of messages transmitted to ALC.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.23 |
alcIStatsX25MesgsInThe number of messages received from X.25.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.24 |
alcIStatsX25MesgsOutThe number of messages transmitted to X.25.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.25 |
alcIStatsALCCharsInThe number of characters received from ALC.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.26 |
alcIStatsALCCharsOutThe number of characters transmitted to ALC.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.27 |
alcIStatsX25CharsInThe number of characters received from X.25.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.28 |
alcIStatsX25CharsOutThe number of characters transmitted to X.25.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.29 |
alcIStatsALCDiscardedMesgsEntityDownThe number of messages received by ALC for which the
destination entity is unable to process the data.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.30 |
alcIStatsX25DiscardedMesgsEntityDownThe number of messages received by X.25 for which the
destination entity is unable to process the data.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.31 |
alcIStatsX25DiscardedMesgsBadALCAddrThe number of messages received from X.25 for which the
addresses specified do not match those associated with
the connection.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.32 |
alcIStatsX25DiscardedMesgsBadHeaderThe number of messages received by X.25 of which the IN
header configured does not match the header present in the
message.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.33 |
alcIStatsX25DiscardedMesgsTooLongThe number of messages received from X.25 that were discarded
because they were longer than the allowable ALC maximum
configured.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.34 |
alcIStatsALCDiscardedMesgsQFullThe number of messages discarded because the ALC outbound
message queue was full.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.35 |
alcIStatsX25DiscardedMesgsQFullThe number of messages discarded because the X.25 outbound
message queue was full.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.36 |
alcIStatsCurrTxALCQSizeThe number of messages currently queued in the ALC
outbound message queue for transmission.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.37 |
alcIStatsCurrTxX25QSizeThe number of messages currently queued in the X.25
outbound message queue for transmission.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.38 |
alcIStatsMaxTxALCQSizeThe maximum (highwater mark) size of the ALC outbound
queue so far.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.39 |
alcIStatsMaxTxX25QSizeThe maximum (highwater mark) size of the X.25 outbound
queue so far.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.28.2.1.40 |
cdx6500PPSTALCTerminalTableThis table contains ALC Terminalinal Statistics parameters. SEQUENCE OF Cdx6500PPSTALCTerminalEntry .1.3.6.1.4.1.449.2.1.3.1.1.28.3 |
cdx6500PPSTALCTerminalEntryEntries in the ALC Terminalinal Statistics Table. Cdx6500PPSTALCTerminalEntry .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1 |
alcTStatsPortNumberPort number of this port.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.1 |
alcTStatsInterchangeAddressThe address of the interchange.
Addresses 0D,0F,1D,2D,3D and 3F are illegal as they are used
as line control characters.ro OCTET STRING .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.2 |
alcTStatsTerminalAddressAddress identifying this terminal.ro OCTET STRING .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.3 |
alcTStatsConnStateCurrent state of the connection.
online :The connection is available for data transfer.
offline :The connection has been disabled by an operator.
connecting:The ALP PAD is attempting to make the X.25
virtual circuit available for use.
inactive :The inactivity timer has expired, so the virtual
circuit has been dropped. Data received from ALC
will cause the connection to be re-established.
pending :The CSD option has been configured and the ALC
entity is currently down; hence the ALP PAD has
disabled the virtual circuit.
na :Value not Availablero Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.4 |
alcTStatsALCMesgsInThe number of messages received from ALC.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.5 |
alcTStatsALCMesgsOutThe number of messages transmitted to ALC.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.6 |
alcTStatsX25MesgsInThe number of messages received from X.25.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.7 |
alcTStatsX25MesgsOutThe number of messages transmitted to X.25.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.8 |
alcTStatsALCCharsInThe number of characters received from ALC.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.9 |
alcTStatsALCCharsOutThe number of characters transmitted to ALC.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.10 |
alcTStatsX25CharsInThe number of characters received from X.25.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.11 |
alcTStatsX25CharsOutThe number of characters transmitted to X.25.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.12 |
alcTStatsALCDiscardedMesgsEntityDownThe number of messages received by ALC for which the
destination entity is unable to process the data.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.13 |
alcTStatsX25DiscardedMesgsEntityDownThe number of messages received by X.25 for which the
destination entity is unable to process the data.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.14 |
alcTStatsX25DiscardedMesgsBadALCAddrThe number of messages received from X.25 for which the
addresses specified do not match those associated with
the connection.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.15 |
alcTStatsX25DiscardedMesgsBadHeaderThe number of messages received by X.25 of which the IN
header configured does not match the header present in the
message.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.16 |
alcTStatsX25DiscardedMesgsTooLongThe number of messages received from X.25 that were discarded
because they were longer than the allowable ALC maximum
configured.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.17 |
alcTStatsALCDiscardedMesgsQFullThe number of messages discarded because the ALC outbound
message queue was full.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.18 |
alcTStatsX25DiscardedMesgsQFullThe number of messages discarded because the X.25 outbound
message queue was full.ro Counter .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.19 |
alcTStatsCurrTxALCQSizeThe number of messages currently queued in the ALC
outbound message queue for transmission.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.20 |
alcTStatsCurrTxX25QSizeThe number of messages currently queued in the X.25
outbound message queue for transmission.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.21 |
alcTStatsMaxTxALCQSizeThe maximum (highwater mark) size of the ALC outbound
queue so far.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.22 |
alcTStatsMaxTxX25QSizeThe maximum (highwater mark) size of the X.25 outbound
queue so far.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.28.3.1.23 |
cdx6500Controls OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4 |
cdx6500ContALC OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.4.10 |
cdx6500ContALCPortTableThis table contains ALC Port Control parameters. SEQUENCE OF Cdx6500ContALCPortEntry .1.3.6.1.4.1.449.2.1.4.10.1 |
cdx6500ContALCPortEntryEntries in the ALC Port Control Table. Cdx6500ContALCPortEntry .1.3.6.1.4.1.449.2.1.4.10.1.1 |
alcPContPortNumberALC Port Number. INTEGER .1.3.6.1.4.1.449.2.1.4.10.1.1.1 |
alcPContPortBootBoots the specified ALC Port.
boot - Boot the port.
noBoot - Do not boot the port.rw Enumeration .1.3.6.1.4.1.449.2.1.4.10.1.1.2 |
alcPContPortEnableEnables the specified ALC Port.
enable - Enable the port.
noEnable - Do not enable the port.rw Enumeration .1.3.6.1.4.1.449.2.1.4.10.1.1.3 |
alcPContPortDisableDisables the specified ALC Port.
disable - Disable the port.
noDisable - Do not disable the port.rw Enumeration .1.3.6.1.4.1.449.2.1.4.10.1.1.4 |
cdx6500ContALCInterchangeTableThis table contains ALC Interchange Control parameters. SEQUENCE OF Cdx6500ContALCInterchangeEntry .1.3.6.1.4.1.449.2.1.4.10.2 |
cdx6500ContALCInterchangeEntryEntries in the ALC Interchange Control Table. Cdx6500ContALCInterchangeEntry .1.3.6.1.4.1.449.2.1.4.10.2.1 |
alcIContPortNumberALC Port Number. INTEGER .1.3.6.1.4.1.449.2.1.4.10.2.1.1 |
alcIContInterchangeAddressALC Interchange address. OCTET STRING .1.3.6.1.4.1.449.2.1.4.10.2.1.2 |
alcIContInterchangeBootBoots the specified ALC Interchange.
boot - Boot the interchange.
noBoot - Do not boot the interchange.rw Enumeration .1.3.6.1.4.1.449.2.1.4.10.2.1.3 |
alcIContInterchangeEnableEnables the specified ALC Interchange.
enable - Enable the interchange.
noEnable - Do not enable the interchange.rw Enumeration .1.3.6.1.4.1.449.2.1.4.10.2.1.4 |
alcIContInterchangeDisableDisables the specified ALC Interchange.
disable - Disable the interchange.
noDisable - Do not disable the interchange.rw Enumeration .1.3.6.1.4.1.449.2.1.4.10.2.1.5 |
cdx6500ContALCTerminalTableThis table contains ALC Terminal Control parameters. SEQUENCE OF Cdx6500ContALCTerminalEntry .1.3.6.1.4.1.449.2.1.4.10.3 |
cdx6500ContALCTerminalEntryEntries in the ALC Terminal Control Table. Cdx6500ContALCTerminalEntry .1.3.6.1.4.1.449.2.1.4.10.3.1 |
alcTContPortNumberALC Port Number. INTEGER .1.3.6.1.4.1.449.2.1.4.10.3.1.1 |
alcTContInterchangeAddressALC Interchange address. OCTET STRING .1.3.6.1.4.1.449.2.1.4.10.3.1.2 |
alcTContTerminalAddressAddress identifying this terminal. OCTET STRING .1.3.6.1.4.1.449.2.1.4.10.3.1.3 |
alcTContTerminalBootBoots the specified ALC terminal.
boot - Boot the terminal.
noBoot - Do not boot the terminal.rw Enumeration .1.3.6.1.4.1.449.2.1.4.10.3.1.4 |
alcTContTerminalEnableEnables the specified ALC Terminal.
enable - Enable the terminal.
noEnable - Do not enable the terminal.rw Enumeration .1.3.6.1.4.1.449.2.1.4.10.3.1.5 |
alcTContTerminalDisableDisables the specified ALC terminal.
disable - Disable the terminal.
noDisable - Do not disable the terminal.rw Enumeration .1.3.6.1.4.1.449.2.1.4.10.3.1.6 |