ADAPTECDURALINK-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ADAPTECDURALINK-MIB.
55
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
55 total| Object Name |
|---|
adaptec OBJECT IDENTIFIER .1.3.6.1.4.1.795 |
RFC1155-SMI Unknown .1.3.6.1.4.1.795 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.795.3 |
nic OBJECT IDENTIFIER .1.3.6.1.4.1.795.3.1 |
npg OBJECT IDENTIFIER .1.3.6.1.4.1.795.3.1.2 |
duralink OBJECT IDENTIFIER .1.3.6.1.4.1.795.3.1.2.3 |
duralinkStatusTrapThe port status has changed. TRAP-TYPE .1.3.6.1.4.1.795.3.1.2.3.0.1 |
information OBJECT IDENTIFIER .1.3.6.1.4.1.795.3.1.2.3.1 |
numInterfacesThe number of Adaptec network interfaces
present on this system.ro INTEGER .1.3.6.1.4.1.795.3.1.2.3.1.1 |
numPortsThe number of Adaptec network ports
present on this system.ro INTEGER .1.3.6.1.4.1.795.3.1.2.3.1.2 |
numCardsThe number of Adaptec network adapters
present on this system.ro INTEGER .1.3.6.1.4.1.795.3.1.2.3.1.3 |
interfaceStatsTableThe table listing Adaptec network interface statistics. SEQUENCE OF InterfaceStatsEntry .1.3.6.1.4.1.795.3.1.2.3.2 |
interfaceStatsEntryEach entry lists statistics for a single network interface. InterfaceStatsEntry .1.3.6.1.4.1.795.3.1.2.3.2.1 |
iInterfaceIndexA unique value assigned to each interface
This is an increasing numeric value ranging between
1 and the value of NumInterfaces.ro INTEGER .1.3.6.1.4.1.795.3.1.2.3.2.1.1 |
iInterfaceNameThe descriptive name assigned to the interface
at the time the interface was configured.ro DisplayString .1.3.6.1.4.1.795.3.1.2.3.2.1.2 |
iInterfacePortsThe number of ports in the interface.
An interface may consist of one or more ports.ro INTEGER .1.3.6.1.4.1.795.3.1.2.3.2.1.3 |
iPermNetAddressThe permanent network address assigned to this interface.
This is the node address stored permanently in the adapter.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.795.3.1.2.3.2.1.4 |
iCurrentNetAddressThe network address currently assigned this interface.
This address may be administered by software.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.795.3.1.2.3.2.1.5 |
iDataRateThis is the rate at which data is transferred over this interface, measured in MPBS.ro INTEGER .1.3.6.1.4.1.795.3.1.2.3.2.1.6 |
iTotalPacketsTransmittedThis is the total number of packets transmitted over this interface.ro Counter .1.3.6.1.4.1.795.3.1.2.3.2.1.7 |
iTotalBytesTransmittedThis is the total number of bytes transmitted over this interface.ro Counter .1.3.6.1.4.1.795.3.1.2.3.2.1.8 |
iTotalPacketsReceivedThis is the total number of packets received over this interface.ro Counter .1.3.6.1.4.1.795.3.1.2.3.2.1.9 |
iTotalBytesReceivedThis is the total number of bytes received over this interface.ro Counter .1.3.6.1.4.1.795.3.1.2.3.2.1.10 |
iTotalTransmitErrorsThis is the total number of Transmit errors seen on this interface.ro Counter .1.3.6.1.4.1.795.3.1.2.3.2.1.11 |
iTotalReceiveErrorsThis is the total number of Receive errors seen on this interface.ro Counter .1.3.6.1.4.1.795.3.1.2.3.2.1.12 |
iInterfaceTypeThis is the interface type.
standalone indicates a single port configuration.
failover indicates a two port group supporting failover resiliency.
loadBalanced indicates a multiple port group providing load balancing.ro Enumeration .1.3.6.1.4.1.795.3.1.2.3.2.1.13 |
portStatsTableThe table listing Adaptec network port statistics. SEQUENCE OF PortStatsEntry .1.3.6.1.4.1.795.3.1.2.3.3 |
portStatsEntryEach entry lists statistics for a single network port. PortStatsEntry .1.3.6.1.4.1.795.3.1.2.3.3.1 |
pInterfaceIndexA unique value assigned to each interface
This is an increasing numeric value ranging between
1 and the value of NumInterfaces.ro INTEGER .1.3.6.1.4.1.795.3.1.2.3.3.1.1 |
pPortIndexA unique value assigned to each port on a particular interface.
This is an increasing numeric value ranging between
1 and the value of iInterfacePorts for the interface indexed by iInterfaceIndex.ro INTEGER .1.3.6.1.4.1.795.3.1.2.3.3.1.2 |
pPortNameThe descriptive name assigned to the port.
This may not be supported by all operating systems.ro DisplayString .1.3.6.1.4.1.795.3.1.2.3.3.1.3 |
pCardNumberThe value of cpCardIndex that corresponds to this port.ro INTEGER .1.3.6.1.4.1.795.3.1.2.3.3.1.4 |
pCardPortNumberThe value of cpPortIndex that corresponds to this port.ro INTEGER .1.3.6.1.4.1.795.3.1.2.3.3.1.5 |
pPermNetAddressThe permanent network address assigned to this port.
This is the node address stored permanently in the adapter.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.795.3.1.2.3.3.1.6 |
pCurrentNetAddressThe network address currently assigned to this port.
This address may be administered by software.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.795.3.1.2.3.3.1.7 |
pDataRateThis is the rate at which data is transferred over this port, measured in MPBS.ro INTEGER .1.3.6.1.4.1.795.3.1.2.3.3.1.8 |
pTotalPacketsTransmittedThis is the total number of packets transmitted over this port.ro Counter .1.3.6.1.4.1.795.3.1.2.3.3.1.9 |
pTotalBytesTransmittedThis is the total number of bytes transmitted over this port.ro Counter .1.3.6.1.4.1.795.3.1.2.3.3.1.10 |
pTotalPacketsReceivedThis is the total number of packets received over this port.ro Counter .1.3.6.1.4.1.795.3.1.2.3.3.1.11 |
pTotalBytesReceivedThis is the total number of bytes received over this port.ro Counter .1.3.6.1.4.1.795.3.1.2.3.3.1.12 |
pTotalTransmitErrorsThis is the total number of transmit errors seen on this port.ro Counter .1.3.6.1.4.1.795.3.1.2.3.3.1.13 |
pTotalReceiveErrorsThis is the total number of receive errors seen on this port.ro Counter .1.3.6.1.4.1.795.3.1.2.3.3.1.14 |
pStatusThe current status of the port. portActive indicates a functioning port.
portDown indicates a port that is not functioning.
portDisabled indicates a port that has been down for some time or has
demonstrated a serious problem which should be addressed by the system
administrator. portInStandby indicates a port which is designated as a backup
in a failover interface.ro Enumeration .1.3.6.1.4.1.795.3.1.2.3.3.1.15 |
cardInformationTableA table listing Adaptec network card information. SEQUENCE OF CardInformationEntry .1.3.6.1.4.1.795.3.1.2.3.4 |
cardInformationEntryEach entry lists information about a single network card. CardInformationEntry .1.3.6.1.4.1.795.3.1.2.3.4.1 |
cCardIndexA unique value assigned to each network card.
This is an increasing numeric value ranging between
1 and the value of NumCards.ro INTEGER .1.3.6.1.4.1.795.3.1.2.3.4.1.1 |
cCardDescriptionThe descriptive name assigned to the network card.ro DisplayString .1.3.6.1.4.1.795.3.1.2.3.4.1.2 |
cPortsOnCardThe number of ports on the network card.ro INTEGER .1.3.6.1.4.1.795.3.1.2.3.4.1.3 |
cardPortInfoTableThis table indicates the interface and port number associated
with each port on all installed network cards. SEQUENCE OF CardPortInfoEntry .1.3.6.1.4.1.795.3.1.2.3.5 |
cardPortInfoEntryEach entry lists information for a single port on a network card. CardPortInfoEntry .1.3.6.1.4.1.795.3.1.2.3.5.1 |
cpCardIndexA unique value assigned to each network card.
This is an increasing numeric value ranging between
1 and the value of NumCards.ro INTEGER .1.3.6.1.4.1.795.3.1.2.3.5.1.1 |
cpPortIndexA unique value assigned to each port on a particular network card.
This is an increasing numeric value ranging between
1 and the value of cPortsOnCard for the card indexed by cCardIndex.ro INTEGER .1.3.6.1.4.1.795.3.1.2.3.5.1.2 |
cpInterfaceNumberThe value of pInterfaceIndex that corresponds to this port.
If this port is not part of an interface it will be set to 0ro INTEGER .1.3.6.1.4.1.795.3.1.2.3.5.1.3 |
cpPortNumberThe value of pPortIndex that corresponds to this port.
If this port is not part of an interface it will be set to 0ro INTEGER .1.3.6.1.4.1.795.3.1.2.3.5.1.4 |
cpTableNumber1The value of Lan Adapter component table rows that correspond to this port.
This provides a mapping to entries in an SNMP implementation of the
Desktop Management Interface Lan Adapter Component.
If this port is not in use on the system this value will be set to 0ro INTEGER .1.3.6.1.4.1.795.3.1.2.3.5.1.5 |