ADAPTEC-UNIVERSAL-STORAGE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ADAPTEC-UNIVERSAL-STORAGE-MIB.
292
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
292 total| Object Name |
|---|
adaptec OBJECT IDENTIFIER .1.3.6.1.4.1.795 |
RFC-1215 Unknown .1.3.6.1.4.1.795 |
universalStorage OBJECT IDENTIFIER .1.3.6.1.4.1.795.14 |
ausMIB OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1 |
ausTrapOtherInformationalOther informational trap message TRAP-TYPE .1.3.6.1.4.1.795.14.1.0.1001 |
ausTrapOtherWarningOther warning trap message TRAP-TYPE .1.3.6.1.4.1.795.14.1.0.1002 |
ausTrapOtherFatalOther fatal trap message TRAP-TYPE .1.3.6.1.4.1.795.14.1.0.1003 |
ausTrapDeviceInformationInformational status of a device TRAP-TYPE .1.3.6.1.4.1.795.14.1.0.1010 |
ausTrapDeviceWarningWarning status of a device TRAP-TYPE .1.3.6.1.4.1.795.14.1.0.1011 |
ausTrapDeviceFatalFatal status of a device TRAP-TYPE .1.3.6.1.4.1.795.14.1.0.1012 |
ausTrapEnclosureInformationInformational status of an enclosure TRAP-TYPE .1.3.6.1.4.1.795.14.1.0.1020 |
ausTrapEnclosureWarningWarning status of an enclosure TRAP-TYPE .1.3.6.1.4.1.795.14.1.0.1021 |
ausTrapEnclosureFatalFatal status of an enclosure TRAP-TYPE .1.3.6.1.4.1.795.14.1.0.1022 |
ausTrapArrayInformationInformational status of an array TRAP-TYPE .1.3.6.1.4.1.795.14.1.0.1030 |
ausTrapArrayWarningWarning status of an array TRAP-TYPE .1.3.6.1.4.1.795.14.1.0.1031 |
ausTrapArrayFatalFatal status of an array TRAP-TYPE .1.3.6.1.4.1.795.14.1.0.1032 |
ausTrapArrayTaskInformationInformational status of an array task TRAP-TYPE .1.3.6.1.4.1.795.14.1.0.1040 |
ausTrapArrayTaskWarningWarning status of an array task TRAP-TYPE .1.3.6.1.4.1.795.14.1.0.1041 |
ausTrapArrayTaskFatalFatal status of an array task TRAP-TYPE .1.3.6.1.4.1.795.14.1.0.1042 |
ausTrapSpareInformationInformational status of a spare TRAP-TYPE .1.3.6.1.4.1.795.14.1.0.1050 |
ausTrapSpareWarningWarning status of a spare TRAP-TYPE .1.3.6.1.4.1.795.14.1.0.1051 |
ausTrapSpareFatalFatal status of a spare TRAP-TYPE .1.3.6.1.4.1.795.14.1.0.1052 |
ausMibStatus OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.100 |
ausMibStatusRevMajorThe major number of the revision of the Adaptec
Universal Storage MIB.ro INTEGER .1.3.6.1.4.1.795.14.1.100.1 |
ausMibStatusRevMinorThe minor number of the revision of the Adaptec
Universal Storage MIB.ro INTEGER .1.3.6.1.4.1.795.14.1.100.2 |
ausMibStatusSecondsSinceInitiationThe number of elapsed seconds since this SNMP subagent
was initiated.ro INTEGER .1.3.6.1.4.1.795.14.1.100.3 |
ausMibStatusCopyrightCopyright notification. This string shall always be
reported as 'Copyright (C) 2011 PMC-Sierra, Inc'. The year
may be modified as appropriate.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.100.4 |
ausMibStatusOverallOverall operational status. This is the 'worst' overall
status of all controllers reported in the MIB.ro ObjectStatus .1.3.6.1.4.1.795.14.1.100.5 |
ausAggregatedController OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.200 |
ausAggregatedControllerTableA list of aggregated controllers. SEQUENCE OF AusAggregatedControllerEntry .1.3.6.1.4.1.795.14.1.200.1 |
ausAggregatedControllerEntryAn aggregated controller entry. AusAggregatedControllerEntry .1.3.6.1.4.1.795.14.1.200.1.1 |
ausAggregatedControllerIndexA unique index value for each aggregated controller
beginning with 1.ro INTEGER .1.3.6.1.4.1.795.14.1.200.1.1.1 |
ausAggregatedControllerListA list of indices into the ausControllerTable
specifying the controllers that are aggregated by a
software driver to form an array.ro IndexList .1.3.6.1.4.1.795.14.1.200.1.1.2 |
ausController OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.201 |
ausControllerTableA list of controllers. SEQUENCE OF AusControllerEntry .1.3.6.1.4.1.795.14.1.201.1 |
ausControllerEntryA controller entry. AusControllerEntry .1.3.6.1.4.1.795.14.1.201.1.1 |
ausControllerIndexA unique index value for each controller beginning with
1.ro INTEGER .1.3.6.1.4.1.795.14.1.201.1.1.1 |
ausControllerUniqueIdAn ID for this controller that is unique across all
namespaces.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.201.1.1.2 |
ausControllerVendorVendor (manufacturer) of the controller.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.201.1.1.3 |
ausControllerModelModel (descriptive name) of the controller.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.201.1.1.4 |
ausControllerRevisionRevision information of the controller.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.201.1.1.5 |
ausControllerSerialNumberSerial number of the controller.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.201.1.1.6 |
ausControllerDescriptionFree form text for additional description of the
controller.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.201.1.1.7 |
ausControllerHostBusTypeType of host computer system bus for this controller.ro Enumeration .1.3.6.1.4.1.795.14.1.201.1.1.8 |
ausControllerHostBusMaximumTransferRateMaximum possible transfer rate on the host bus in
megabytes per second.ro INTEGER .1.3.6.1.4.1.795.14.1.201.1.1.9 |
ausControllerNumberOfChannelsThe number of channels present on this controller.ro INTEGER .1.3.6.1.4.1.795.14.1.201.1.1.10 |
ausControllerHighestChannelWithDevicesThe 0-relative channel number within the controller
which has at least one device attached to it.ro INTEGER .1.3.6.1.4.1.795.14.1.201.1.1.11 |
ausControllerInstalledMemoryMemory installed on this controller in megabytes.ro INTEGER .1.3.6.1.4.1.795.14.1.201.1.1.12 |
ausControllerAudibleAlarmStatusStatus of audible alarm for this controller.ro OptionStatus .1.3.6.1.4.1.795.14.1.201.1.1.13 |
ausControllerBatteryStatusStatus of battery for this controller.ro BatteryStatus .1.3.6.1.4.1.795.14.1.201.1.1.14 |
ausControllerZMMStatusStatus of ZMM for this controller.ro ZMMStatus .1.3.6.1.4.1.795.14.1.201.1.1.15 |
ausControllerStatusOperational status of this controller.ro ObjectStatus .1.3.6.1.4.1.795.14.1.201.1.1.16 |
ausControllerOverallStatusOverall operational status of this controller and its
children. This is the 'worst' status of the controller
status and that of all arrays and un-arrayed devices
attached to this controller.ro ObjectStatus .1.3.6.1.4.1.795.14.1.201.1.1.17 |
ausControllerPerformanceModeTo ensure optimal performance of the logical drives in the
storage space, the performance mode is used.It improves
I/O throughput based on the needs of the application.ro Enumeration .1.3.6.1.4.1.795.14.1.201.1.1.18 |
ausControllerMaxCacheSupportedro Enumeration .1.3.6.1.4.1.795.14.1.201.1.1.19 |
ausControllerMaxCacheAssignedDrivesro Enumeration .1.3.6.1.4.1.795.14.1.201.1.1.20 |
ausControllerMaximumAllowedMaxCacheDrivesro Enumeration .1.3.6.1.4.1.795.14.1.201.1.1.21 |
ausControllerNCQStatusro Enumeration .1.3.6.1.4.1.795.14.1.201.1.1.22 |
ausControllerRelationship OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.202 |
ausControllerRelationshipTableA list of controller relationships. SEQUENCE OF AusControllerRelationshipEntry .1.3.6.1.4.1.795.14.1.202.1 |
ausControllerRelationshipEntryA controller relationship entry. AusControllerRelationshipEntry .1.3.6.1.4.1.795.14.1.202.1.1 |
ausControllerRelationshipIndexA unique index value for each controller relationship
beginning with 1.ro INTEGER .1.3.6.1.4.1.795.14.1.202.1.1.1 |
ausControllerRelationshipTypeSelects whether this row entry is a relationship between
entries in the ausController table or entries in the
ausExternalRaidDevice table. Setting of this field
determines if the ausControllerRelationshipList is a
list of indices in the ausController table or the
ausExternalRaidDevice table.ro Enumeration .1.3.6.1.4.1.795.14.1.202.1.1.2 |
ausControllerRelationshipListA list of indices into the appropriate controller table
specifying the controllers that are related.ro IndexList .1.3.6.1.4.1.795.14.1.202.1.1.3 |
ausControllerRelationshipRelationThe attributes of the relationship among the related
controllers.ro INTEGER -- Note: This is a bit field. Multiple bits may -- be simultaneously set. -- Bit 0 (LSB) = failover -- Bit 1 = load balanced -- Bit 2 = aggregated for bandwidth -- Bit 3 = Active/Active .1.3.6.1.4.1.795.14.1.202.1.1.4 |
ausI2ORaidController OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.210 |
ausI2ORaidControllerTableA list of I2O RAID storage controllers. SEQUENCE OF AusI2ORaidControllerEntry .1.3.6.1.4.1.795.14.1.210.1 |
ausI2ORaidControllerEntryA I2O RAID storage controller entry. AusI2ORaidControllerEntry .1.3.6.1.4.1.795.14.1.210.1.1 |
ausI2ORaidControllerIndexA unique index value for each I2O RAID controller.ro INTEGER .1.3.6.1.4.1.795.14.1.210.1.1.1 |
ausI2ORaidControllerAddressThe controller Address (normally displayed in hex.) It
is a 32-bit value representing the memory address used by
the controllerro INTEGER (0..'FFFFFFFE'h) .1.3.6.1.4.1.795.14.1.210.1.1.2 |
ausI2ORaidControllerBackgroundTaskPriorityThis object controls the priority of array background
tasks such as Build, Rebuild and Verify for this
controller. The values range from 1 to 10. A value of 1
is the slowest but uses the least amount of the
controller's bandwidth. While a value of 10 is the
fastest but it uses the most bandwidth.ro INTEGER .1.3.6.1.4.1.795.14.1.210.1.1.3 |
ausI2ORaidControllerBiosRevisionThe controller B.I.O.S. revision information.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.210.1.1.4 |
ausI2ORaidControllerSmorRevisionThe controller S.M.O.R. revision information.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.210.1.1.5 |
ausI2ORaidControllerMainIndexThis is the index into ausControllerTable of the row
that is extended by this row of
ausI2ORaidControllerTable.ro INTEGER .1.3.6.1.4.1.795.14.1.210.1.1.6 |
ausCCodeController OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.211 |
ausCCodeControllerTableA list of Container Code storage controllers. SEQUENCE OF AusCCodeControllerEntry .1.3.6.1.4.1.795.14.1.211.1 |
ausCCodeControllerEntryA Container Code storage controller entry. AusCCodeControllerEntry .1.3.6.1.4.1.795.14.1.211.1.1 |
ausCCodeControllerIndexA unique index value for each Container Code controller.ro INTEGER .1.3.6.1.4.1.795.14.1.211.1.1.1 |
ausCCodeControllerPCIBusIdThe identifier of the host computer PCI bus the
controller is attached to.ro INTEGER .1.3.6.1.4.1.795.14.1.211.1.1.2 |
ausCCodeControllerPCISlotNumberThe slot number of the host computer PCI bus the
controller is in.ro INTEGER .1.3.6.1.4.1.795.14.1.211.1.1.3 |
ausCCodeControllerBiosVersionThe B.I.O.S. software version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.211.1.1.4 |
ausCCodeControllerMainIndexThis is the index into ausControllerTable of the row
that is extended by this row of
ausCCodeControllerTable.ro INTEGER .1.3.6.1.4.1.795.14.1.211.1.1.5 |
ausHostRAIDController OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.212 |
ausHostRAIDControllerTableA list of HostRAID storage controllers. SEQUENCE OF AusHostRAIDControllerEntry .1.3.6.1.4.1.795.14.1.212.1 |
ausHostRAIDControllerEntryA HostRAID storage controller entry. AusHostRAIDControllerEntry .1.3.6.1.4.1.795.14.1.212.1.1 |
ausHostRAIDControllerIndexA unique index value for each HostRAID controller.ro INTEGER .1.3.6.1.4.1.795.14.1.212.1.1.1 |
ausHostRAIDControllerPCIBusThe PCI bus number of this controller.ro INTEGER .1.3.6.1.4.1.795.14.1.212.1.1.2 |
ausHostRAIDControllerPCIDeviceThe PCI device number of this controller.ro INTEGER .1.3.6.1.4.1.795.14.1.212.1.1.3 |
ausHostRAIDControllerPCIFunctionThe PCI function number of this controller.ro INTEGER .1.3.6.1.4.1.795.14.1.212.1.1.4 |
ausHostRAIDControllerMainIndexThis is the index into ausControllerTable of the row
that is extended by this row of
ausI2ORaidControllerTable.ro INTEGER .1.3.6.1.4.1.795.14.1.212.1.1.5 |
ausServeRAIDController OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.213 |
ausServeRAIDControllerTableA list of ServeRAID storage controllers. SEQUENCE OF AusServeRAIDControllerEntry .1.3.6.1.4.1.795.14.1.213.1 |
ausServeRAIDControllerEntryA ServeRAID storage controller entry. AusServeRAIDControllerEntry .1.3.6.1.4.1.795.14.1.213.1.1 |
ausServeRAIDControllerIndexA unique index value for each ServeRAID controller.ro INTEGER .1.3.6.1.4.1.795.14.1.213.1.1.1 |
ausServeRAIDControllerBIOSRevisionThe B.I.O.S. Revision of this controller.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.213.1.1.2 |
ausServeRAIDControllerDefaultRebuildRateThe default rebuild rate of this controller.ro Enumeration .1.3.6.1.4.1.795.14.1.213.1.1.3 |
ausServeRAIDControllerSlotNumberThe slot number of this controller.ro INTEGER .1.3.6.1.4.1.795.14.1.213.1.1.4 |
ausServeRAIDControllerMainIndexThis is the index into ausControllerTable of the row
that is extended by this row of
ausServeRAIDControllerTable.ro INTEGER .1.3.6.1.4.1.795.14.1.213.1.1.5 |
ausChannel OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.300 |
ausChannelTableA list of channels. SEQUENCE OF AusChannelEntry .1.3.6.1.4.1.795.14.1.300.1 |
ausChannelEntryA channel entry. AusChannelEntry .1.3.6.1.4.1.795.14.1.300.1.1 |
ausChannelIndexA unique index value for each channel beginning with 1.ro INTEGER .1.3.6.1.4.1.795.14.1.300.1.1.1 |
ausChannelLocationIndicates whether the channelAusControllerIndex field
should be interpreted as an index into the
controllerTable or the externalRaidDeviceTable. In other
words, shows whether this channel is a channel connected
directly to the host or is a back-end channel connected
to an external RAID controller.ro Enumeration .1.3.6.1.4.1.795.14.1.300.1.1.2 |
ausChannelAusControllerIndexIndex into the Adaptec Universal Storage controller
table containing the entry that hosts this channel, or an
index into the externalRaidDevice table containing the
external RAID controller that hosts this channel. Where
the index points is selected by channelLocation above.ro INTEGER .1.3.6.1.4.1.795.14.1.300.1.1.3 |
ausChannelAusControllerChannelNumberChannel number within the controller referenced by
channelAusControllerIndex. Channels are numbered
sequentially starting with 0.ro INTEGER .1.3.6.1.4.1.795.14.1.300.1.1.4 |
ausChannelTypePhysical transmission technology for this channel.ro Enumeration .1.3.6.1.4.1.795.14.1.300.1.1.5 |
ausChannelTypeDescriptionA finer-grained description for the channel. For
example, SCSI may be further refined as 'Ultra160' or
'Ultra320'. IDE may be further refined per the various
different performance types available.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.300.1.1.6 |
ausChannelControllerIdController ID number used on this channel. Meaning is
dependent on channelType. For example, SCSI channels
would report controller SCSI ID in this field. The field
is a string to allow for a wide range of addressing
schemes.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.300.1.1.7 |
ausChannelControllerSubIdController SubId number used on this channel. Meaning
is dependent on channelType. For example, SCSI channels
would report controller SCSI LUN in this field. The
field is a string to allow for a wide range of addressing
schemes.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.300.1.1.8 |
ausChannelWidthWidth of the channel in bits. For example, SCSI would
be 8 or 16. Serial interfaces would be 1.ro INTEGER .1.3.6.1.4.1.795.14.1.300.1.1.9 |
ausChannelMaximumTransferRateMaximum transfer rate of this channel in megabytes per
second.ro INTEGER .1.3.6.1.4.1.795.14.1.300.1.1.10 |
ausChannelMaximumAttachmentsMaximum number of devices that may be attached to this
this channel (include controller in the count). In case
of SATA, this is the total number of ports. Ports are
virtualized into IDs on 'SCSI channels'.ro INTEGER .1.3.6.1.4.1.795.14.1.300.1.1.11 |
ausChannelOverallStatusOverall operational status of this channel. This is the
'worst' status of all arrays and un-arrayed devices
attached to this channel.ro ObjectStatus .1.3.6.1.4.1.795.14.1.300.1.1.12 |
ausChannelRelationship OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.301 |
ausChannelRelationshipTableA list of channel relationships. SEQUENCE OF AusChannelRelationshipEntry .1.3.6.1.4.1.795.14.1.301.1 |
ausChannelRelationshipEntryA channel relationship entry. AusChannelRelationshipEntry .1.3.6.1.4.1.795.14.1.301.1.1 |
ausChannelRelationshipIndexA unique index value for each channel relationship
beginning with 1.ro INTEGER .1.3.6.1.4.1.795.14.1.301.1.1.1 |
ausChannelRelationshipListA list of indices into the channel table specifying the
channels that are related.ro IndexList .1.3.6.1.4.1.795.14.1.301.1.1.2 |
ausChannelRelationshipRelationThe attributes of the relationship among the related
controllers.ro INTEGER -- Note: This is a bit field. Multiple bits may -- be simultaneously set. -- Bit 0 (LSB) = single controller failover -- Bit 1 = single controller load balanced -- Bit 2 = single controller aggregated for bandwidth -- Bit 16 = accessible from multiple controllers -- Note: Bit 16 will never be simultaneously set with -- any other bit. .1.3.6.1.4.1.795.14.1.301.1.1.3 |
ausDevice OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.400 |
ausDeviceTableA list of devices. SEQUENCE OF AusDeviceEntry .1.3.6.1.4.1.795.14.1.400.1 |
ausDeviceEntryA device entry. AusDeviceEntry .1.3.6.1.4.1.795.14.1.400.1.1 |
ausDeviceIndexA unique index value for each device beginning with 1.ro INTEGER .1.3.6.1.4.1.795.14.1.400.1.1.1 |
ausDeviceUniqueIdAn ID for this device that is unique across all
namespaces.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.400.1.1.2 |
ausDeviceAusChannelIndicesA list of indices into the Adaptec Universal Storage
Channel table to which this device is attached. (For
detailed information about connections between the device
and the channel, refer to the ausDevicePort
table.)ro IndexList .1.3.6.1.4.1.795.14.1.400.1.1.3 |
ausDeviceTypeDevice type for this device.ro Enumeration .1.3.6.1.4.1.795.14.1.400.1.1.4 |
ausDeviceTypeGroupSelects which of the subordinate device tables contains
more information about this device.ro Enumeration .1.3.6.1.4.1.795.14.1.400.1.1.5 |
ausDeviceVendorVendor (manufacturer) of this device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.400.1.1.6 |
ausDeviceModelModel of this device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.400.1.1.7 |
ausDeviceRevisionRevision information for this device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.400.1.1.8 |
ausDeviceSerialNumberSerial number of this device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.400.1.1.9 |
ausDeviceNumberOfPortsNumber of entries present in the device port table for
this device (which is the same as the number of ports on
the device).ro INTEGER .1.3.6.1.4.1.795.14.1.400.1.1.10 |
ausDeviceStatusOperational status of this device.ro ObjectStatus .1.3.6.1.4.1.795.14.1.400.1.1.11 |
ausDeviceLocationDescribes the location of this device in a technology-specific
manner. This value usually matches the location string on any
traps involving this device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.400.1.1.12 |
ausDeviceMaxCacheCapable.ro Enumeration .1.3.6.1.4.1.795.14.1.400.1.1.13 |
ausDeviceMaxCacheAssignedro Enumeration .1.3.6.1.4.1.795.14.1.400.1.1.14 |
ausDeviceSataNCQEnabled.ro Enumeration .1.3.6.1.4.1.795.14.1.400.1.1.15 |
ausDevicePort OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.401 |
ausDevicePortTableA list of device ports. SEQUENCE OF AusDevicePortEntry .1.3.6.1.4.1.795.14.1.401.1 |
ausDevicePortEntryA device port entry. AusDevicePortEntry .1.3.6.1.4.1.795.14.1.401.1.1 |
ausDevicePortIndexA unique index value for each device port beginning with
1.ro INTEGER .1.3.6.1.4.1.795.14.1.401.1.1.1 |
ausDevicePortUniqueIdAn ID for this device port that is unique across all
namespaces.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.401.1.1.2 |
ausDevicePortAusDeviceIndexIndex into the Adaptec Universal Storage Device table
locating the device that contains this port.ro INTEGER .1.3.6.1.4.1.795.14.1.401.1.1.3 |
ausDevicePortAusDevicePortNumberPort number within the device referenced by
ausDevicePortAusDeviceIndex. Ports are numbered
sequentially starting with 0.ro INTEGER .1.3.6.1.4.1.795.14.1.401.1.1.4 |
ausDevicePortAusChannelIndexIndex into the Adaptec Universal Storage Channel table
locating the channel to which this device port is
attached.ro INTEGER .1.3.6.1.4.1.795.14.1.401.1.1.5 |
ausDevicePortIdPort ID number used by this device. Meaning is
dependent on channel type. For example, SCSI channels
would report device SCSI ID in this field. The field is
a string to allow for a wide range of addressing
schemes. For non-parallel SCSI this is the virtual SCSI
targetIdro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.401.1.1.6 |
ausDevicePortSubIdPort SubId number used by this device. Meaning is
dependent on channel type. For example, SCSI channels
would report device SCSI LUN in this field. The field is
a string to allow for a wide range of addressing
schemes. For non-parallel SCSI this is the virtual SCSI
LUNro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.401.1.1.7 |
ausDevicePortWidthPort width capability of this device. This may be
narrower than the channel width - for example, an eight
bit SCSI device on a sixteen bit SCSI channel.ro INTEGER .1.3.6.1.4.1.795.14.1.401.1.1.8 |
ausDevicePortMaximumTransferRateMaximum transfer rate of this device in megabytes per
second.ro INTEGER .1.3.6.1.4.1.795.14.1.401.1.1.9 |
ausDevicePortNegotiatedTransferRateNegotiated transfer rate of this device port/ controller
channel pair in megabytes per second.ro Enumeration .1.3.6.1.4.1.795.14.1.401.1.1.10 |
ausDevicePortStatusOperational status of this device port.ro ObjectStatus .1.3.6.1.4.1.795.14.1.401.1.1.11 |
ausStorageDevice OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.410 |
ausStorageDeviceTableA list of storage devices. SEQUENCE OF AusStorageDeviceEntry .1.3.6.1.4.1.795.14.1.410.1 |
ausStorageDeviceEntryA storage device entry. AusStorageDeviceEntry .1.3.6.1.4.1.795.14.1.410.1.1 |
ausStorageDeviceIndexA unique index value for each storage device.ro INTEGER .1.3.6.1.4.1.795.14.1.410.1.1.1 |
ausStorageDeviceDescriptionFree form text for additional description of the storage
device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.410.1.1.2 |
ausStorageDeviceFormattedCapacityFormatted capacity of this storage device in megabytes.ro INTEGER .1.3.6.1.4.1.795.14.1.410.1.1.3 |
ausStorageDeviceBlockSizePhysical block size of this storage device in bytes.ro INTEGER .1.3.6.1.4.1.795.14.1.410.1.1.4 |
ausStorageDeviceNumberOfBlocksLowNumber of physical blocks for this storage device (least
significant 32 bits of 64 bit value).ro INTEGER .1.3.6.1.4.1.795.14.1.410.1.1.5 |
ausStorageDeviceNumberOfBlocksHighNumber of physical blocks for this storage device (most
significant 32 bits of 64 bit value).ro INTEGER .1.3.6.1.4.1.795.14.1.410.1.1.6 |
ausStorageDeviceRemovableMediaStatus of removable media for this storage device.ro Enumeration .1.3.6.1.4.1.795.14.1.410.1.1.7 |
ausStorageDeviceSmartStatusS.M.A.R.T. status of this storage device.ro Enumeration .1.3.6.1.4.1.795.14.1.410.1.1.8 |
ausStorageDeviceMainIndexThis is the index into ausDeviceTable of the row
that is extended by this row of
ausStorageDeviceTable.ro INTEGER .1.3.6.1.4.1.795.14.1.410.1.1.9 |
ausEnclosureDevice OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.411 |
ausEnclosureDeviceTableA list of enclosure devices. SEQUENCE OF AusEnclosureDeviceEntry .1.3.6.1.4.1.795.14.1.411.1 |
ausEnclosureDeviceEntryAn enclosure device entry. AusEnclosureDeviceEntry .1.3.6.1.4.1.795.14.1.411.1.1 |
ausEnclosureDeviceIndexA unique index value for each enclosure device.ro INTEGER .1.3.6.1.4.1.795.14.1.411.1.1.1 |
ausEnclosureDeviceDescriptionFree form text for additional description of the
enclosure.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.411.1.1.2 |
ausEnclosureDeviceProcessorTypeStandard supported by this enclosure.ro Enumeration .1.3.6.1.4.1.795.14.1.411.1.1.3 |
ausEnclosureDeviceNumberOfFansNumber of fans installed in this enclosure.ro INTEGER .1.3.6.1.4.1.795.14.1.411.1.1.4 |
ausEnclosureDeviceNumberOfPowerSuppliesNumber of power supplies installed in this enclosure.ro INTEGER .1.3.6.1.4.1.795.14.1.411.1.1.5 |
ausEnclosureDeviceNumberOfSlotsNumber of slots installed in this enclosure.ro INTEGER .1.3.6.1.4.1.795.14.1.411.1.1.6 |
ausEnclosureDeviceNumberOfTemperatureSensorsNumber of temperature sensors installed in this
enclosure.ro INTEGER .1.3.6.1.4.1.795.14.1.411.1.1.7 |
ausEnclosureDeviceIdLowUnique enclosure ID obtained from inquiry (least
significant 32 bits of 64 bit value).ro INTEGER .1.3.6.1.4.1.795.14.1.411.1.1.8 |
ausEnclosureDeviceIdHighUnique enclosure ID obtained from inquiry (most
significant 32 bits of 64 bit value).ro INTEGER .1.3.6.1.4.1.795.14.1.411.1.1.9 |
ausEnclosureDeviceStandardRevisionRevision of standard adhered to for this enclosure
(obtained from inquiry).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.411.1.1.10 |
ausEnclosureDevicePowerOnTimeTotal number of power on minutes for this enclosure.ro INTEGER .1.3.6.1.4.1.795.14.1.411.1.1.11 |
ausEnclosureDevicePowerCyclesTotal number of power cycles for this enclosure.ro INTEGER .1.3.6.1.4.1.795.14.1.411.1.1.12 |
ausEnclosureDeviceDoorLockPresence and current status of this enclosure's door
lock.ro OptionStatus .1.3.6.1.4.1.795.14.1.411.1.1.13 |
ausEnclosureDeviceSpeakerPresence and current status of this enclosure's
speaker.ro OptionStatus .1.3.6.1.4.1.795.14.1.411.1.1.14 |
ausEnclosureDeviceTemperatureStateIndicates state of internal temperature for this
enclosure.ro Enumeration .1.3.6.1.4.1.795.14.1.411.1.1.15 |
ausEnclosureDeviceMainIndexThis is the index into ausDeviceTable of the row
that is extended by this row of
ausEnclosureDeviceTable.ro INTEGER .1.3.6.1.4.1.795.14.1.411.1.1.16 |
ausExternalRaidDevice OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.412 |
ausExternalRaidDeviceTableA list of external RAID controllers. SEQUENCE OF AusExternalRaidDeviceEntry .1.3.6.1.4.1.795.14.1.412.1 |
ausExternalRaidDeviceEntryAn external RAID controller entry. AusExternalRaidDeviceEntry .1.3.6.1.4.1.795.14.1.412.1.1 |
ausExternalRaidDeviceIndexA unique index value for each external RAID device.ro INTEGER .1.3.6.1.4.1.795.14.1.412.1.1.1 |
ausExternalRaidDeviceDescriptionFree form text for additional description of the
external RAID controller.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.412.1.1.2 |
ausExternalRaidDeviceNumberOfChannelsThe number of back-end channels present on this external
RAID controller.ro INTEGER .1.3.6.1.4.1.795.14.1.412.1.1.3 |
ausExternalRaidDeviceInstalledMemoryInstalled memory in this external RAID controller in
megabytes.ro INTEGER .1.3.6.1.4.1.795.14.1.412.1.1.4 |
ausExternalRaidDeviceAudibleAlarmStatusStatus of audible alarm for this external RAID
controller.ro OptionStatus .1.3.6.1.4.1.795.14.1.412.1.1.5 |
ausExternalRaidDeviceBatteryStatusStatus of battery for this external RAID controller.ro BatteryStatus .1.3.6.1.4.1.795.14.1.412.1.1.6 |
ausExternalRaidDeviceMainIndexThis is the index into ausDeviceTable of the row
that is extended by this row of
ausExternalRaidDeviceTable.ro INTEGER .1.3.6.1.4.1.795.14.1.412.1.1.7 |
ausOtherDevice OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.499 |
ausOtherDeviceTableA list of other devices. SEQUENCE OF AusOtherDeviceEntry .1.3.6.1.4.1.795.14.1.499.1 |
ausOtherDeviceEntryAn other device entry. AusOtherDeviceEntry .1.3.6.1.4.1.795.14.1.499.1.1 |
ausOtherDeviceIndexA unique index value for each other device.ro INTEGER .1.3.6.1.4.1.795.14.1.499.1.1.1 |
ausOtherDeviceDescriptionFree form text for additional description of this
device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.499.1.1.2 |
ausOtherDeviceMainIndexThis is the index into ausDeviceTable of the row
that is extended by this row of
ausOtherDeviceTable.ro INTEGER .1.3.6.1.4.1.795.14.1.499.1.1.3 |
ausEnclosureFan OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.500 |
ausEnclosureFanTableA list of enclosure fans. SEQUENCE OF AusEnclosureFanEntry .1.3.6.1.4.1.795.14.1.500.1 |
ausEnclosureFanEntryAn enclosure fan entry. AusEnclosureFanEntry .1.3.6.1.4.1.795.14.1.500.1.1 |
ausEnclosureFanIndexA unique index value for each fan.ro INTEGER .1.3.6.1.4.1.795.14.1.500.1.1.1 |
ausEnclosureFanAusEnclosureDeviceIndexThe index of the ausEnclosureDeviceTable entry housing
this fan.ro INTEGER .1.3.6.1.4.1.795.14.1.500.1.1.2 |
ausEnclosureFanOrdinalZero-relative fan number within an enclosure.ro INTEGER .1.3.6.1.4.1.795.14.1.500.1.1.3 |
ausEnclosureFanSpeedRotational speed of this fan in RPM.ro INTEGER .1.3.6.1.4.1.795.14.1.500.1.1.4 |
ausEnclosureFanStatusStatus of this fan.ro ObjectStatus .1.3.6.1.4.1.795.14.1.500.1.1.5 |
ausEnclosurePowerSupply OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.501 |
ausEnclosurePowerSupplyTableA list of enclosure power supplies. SEQUENCE OF AusEnclosurePowerSupplyEntry .1.3.6.1.4.1.795.14.1.501.1 |
ausEnclosurePowerSupplyEntryAn enclosure power supply entry. AusEnclosurePowerSupplyEntry .1.3.6.1.4.1.795.14.1.501.1.1 |
ausEnclosurePowerSupplyIndexA unique index value for each power supply.ro INTEGER .1.3.6.1.4.1.795.14.1.501.1.1.1 |
ausEnclosurePowerSupplyAusEnclosureDeviceIndexThe index of the ausEnclosureDeviceTable entry housing
this power supply.ro INTEGER .1.3.6.1.4.1.795.14.1.501.1.1.2 |
ausEnclosurePowerSupplyOrdinalZero-relative power supply number within an enclosure.ro INTEGER .1.3.6.1.4.1.795.14.1.501.1.1.3 |
ausEnclosurePowerSupplyStatusStatus of this power supply.ro Enumeration .1.3.6.1.4.1.795.14.1.501.1.1.4 |
ausEnclosureTemperatureSensor OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.502 |
ausEnclosureTemperatureSensorTableA list of enclosure temperature sensors. SEQUENCE OF AusEnclosureTemperatureSensorEntry .1.3.6.1.4.1.795.14.1.502.1 |
ausEnclosureTemperatureSensorEntryAn enclosure temperature sensor entry. AusEnclosureTemperatureSensorEntry .1.3.6.1.4.1.795.14.1.502.1.1 |
ausEnclosureTemperatureSensorIndexA unique index value for each temperature sensor.ro INTEGER .1.3.6.1.4.1.795.14.1.502.1.1.1 |
ausEnclosureTemperatureSensorAusEnclosureDeviceIndexThe index of the ausEnclosureDeviceTable entry housing
this temperature sensor.ro INTEGER .1.3.6.1.4.1.795.14.1.502.1.1.2 |
ausEnclosureTemperatureSensorOrdinalZero-relative temperature sensor number within an
enclosure.ro INTEGER .1.3.6.1.4.1.795.14.1.502.1.1.3 |
ausEnclosureTemperatureSensorOverTemperatureSpecifies whether this temperature sensor has detected
an over temperature condition.ro ObjectStatus .1.3.6.1.4.1.795.14.1.502.1.1.4 |
ausEnclosureTemperatureSensorDegreesTemperature registered by this sensor in degrees
Fahrenheit.ro INTEGER .1.3.6.1.4.1.795.14.1.502.1.1.5 |
ausEnclosureSlot OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.503 |
ausEnclosureSlotTableA list of enclosure slots. SEQUENCE OF AusEnclosureSlotEntry .1.3.6.1.4.1.795.14.1.503.1 |
ausEnclosureSlotEntryAn enclosure slot entry. AusEnclosureSlotEntry .1.3.6.1.4.1.795.14.1.503.1.1 |
ausEnclosureSlotIndexA unique index value for each slot.ro INTEGER .1.3.6.1.4.1.795.14.1.503.1.1.1 |
ausEnclosureSlotAusEnclosureDeviceIndexThe index of the ausEnclosureDeviceTable entry housing
this slot.ro INTEGER .1.3.6.1.4.1.795.14.1.503.1.1.2 |
ausEnclosureSlotOrdinalZero-relative slot number within an enclosure.ro INTEGER .1.3.6.1.4.1.795.14.1.503.1.1.3 |
ausEnclosureSlotPortIdPort ID number used by the device at this slot. Meaning
is dependent on channel type. For example, SCSI channels
would report device SCSI ID in this field. The field is
a string to allow for a wide range of addressing
schemes.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.503.1.1.4 |
ausEnclosureSlotInsertionsNumber of device insertions for this slot.ro INTEGER .1.3.6.1.4.1.795.14.1.503.1.1.5 |
ausArray OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.1000 |
ausArrayTableA list of arrays. SEQUENCE OF AusArrayEntry .1.3.6.1.4.1.795.14.1.1000.1 |
ausArrayEntryAn array entry. AusArrayEntry .1.3.6.1.4.1.795.14.1.1000.1.1 |
ausArrayIndexA unique index value for each array beginning with 1.ro INTEGER .1.3.6.1.4.1.795.14.1.1000.1.1.1 |
ausArrayNameThe name assigned to this array.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.1000.1.1.2 |
ausArrayCapacityCapacity of this array in megabytes. This is data
(usable) size, not the sum of all extents.ro INTEGER .1.3.6.1.4.1.795.14.1.1000.1.1.3 |
ausArrayTypeRAID level used by this array.ro Enumeration .1.3.6.1.4.1.795.14.1.1000.1.1.4 |
ausArrayStripeSizeStripe size used by this array.ro INTEGER .1.3.6.1.4.1.795.14.1.1000.1.1.5 |
ausArrayTaskStatusTask status of this array.ro Enumeration .1.3.6.1.4.1.795.14.1.1000.1.1.6 |
ausArrayTaskCompletionPercentage completion of running task, if any. Reports
as 100 if no task is active.ro INTEGER .1.3.6.1.4.1.795.14.1.1000.1.1.7 |
ausArrayTaskPriorityPriority of the running task (if any).ro Enumeration .1.3.6.1.4.1.795.14.1.1000.1.1.8 |
ausArrayHostingControllerTypeThis field tells whether the hosting controller for this
array is an actual physical controller, an aggregate
controller (multiple controllers made to look like one
through software), or an external RAID controller. This
field is used to select the meaning of the following
ausArrayControllerIndex field.ro Enumeration .1.3.6.1.4.1.795.14.1.1000.1.1.9 |
ausArrayHostingControllerIndexThis field associates this array with its hosting
controller. if the ausArrayControllerType field equals
physicalController, then this field is an index into the
ausController table. If the ausArrayControllerType
field equals aggregateController, then this field is an
index into the ausAggregateController table. If the
ausArrayControllerType field equal
externalRaidController, then this field is an index into
the ausExternalRaidDevice table.ro INTEGER .1.3.6.1.4.1.795.14.1.1000.1.1.10 |
ausArrayStatusCurrent health of this array.ro ObjectStatus .1.3.6.1.4.1.795.14.1.1000.1.1.11 |
ausArrayStateCurrent health of this array.ro Enumeration .1.3.6.1.4.1.795.14.1.1000.1.1.12 |
ausArrayCacheStatusCurrent write cache status of this array.ro Enumeration .1.3.6.1.4.1.795.14.1.1000.1.1.13 |
ausArrayMembershipFor non-composite arrays (e.g., a straight mirror,
RAID-1, set) this field is always 0. For composite
arrays (e.g. stripe set of mirrors, RAID-10) this field
indicates the position in the array hierarchy. If this
is the topmost array in the hierarchy, this field will be
0. If this is a subordinate array in the hierarchy, this
field is set to a value equal to the index of the entry
in the Array Table locating its parent.ro INTEGER .1.3.6.1.4.1.795.14.1.1000.1.1.14 |
ausArrayIDThe ID of this array on its hosting controller.ro INTEGER .1.3.6.1.4.1.795.14.1.1000.1.1.15 |
ausArrayPMStatusPower Management Status for the Logical Drive.ro Enumeration .1.3.6.1.4.1.795.14.1.1000.1.1.16 |
ausStandByTimerPeriod of inactivity, from 3 minutes to 3 hours,
after which the drives spin rate is lowered.
The default is zero.ro INTEGER .1.3.6.1.4.1.795.14.1.1000.1.1.17 |
ausPowerOffTimerPeriod of inactivity, from 3 minutes to 3 hours,
after which the disk drives are turned off.
The default is zero.ro INTEGER .1.3.6.1.4.1.795.14.1.1000.1.1.18 |
ausVerifyTimerPeriod of inactivity, from 1 hour to 24 hours.
after which an inactive drive (a drive that is already powered down)
is restarted and checked to verify its health. Once the check is
completed, the drive is powered down and returns to its inactive state.
The default is zero.ro INTEGER .1.3.6.1.4.1.795.14.1.1000.1.1.19 |
ausArrayMaxCachePreferredCacheSettingro Enumeration .1.3.6.1.4.1.795.14.1.1000.1.1.20 |
ausArrayMaxCacheSettingro Enumeration .1.3.6.1.4.1.795.14.1.1000.1.1.21 |
ausExtent OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.1001 |
ausExtentTableA list of disk extents. SEQUENCE OF AusExtentEntry .1.3.6.1.4.1.795.14.1.1001.1 |
ausExtentEntryA disk extent entry. AusExtentEntry .1.3.6.1.4.1.795.14.1.1001.1.1 |
ausExtentIndexA unique index value for each disk extent beginning with
1.ro INTEGER .1.3.6.1.4.1.795.14.1.1001.1.1.1 |
ausExtentAusDeviceIndexIndex into the Adaptec Universal Storage device table
that describes the physical disk containing this extent.ro INTEGER .1.3.6.1.4.1.795.14.1.1001.1.1.2 |
ausExtentSizeSize of this extent rounded to nearest megabyte.ro INTEGER .1.3.6.1.4.1.795.14.1.1001.1.1.3 |
ausExtentStartingLBALowStarting disk LBA (logical buffer address) used by this
extent (least significant 32 bits of 64 bit value).ro INTEGER .1.3.6.1.4.1.795.14.1.1001.1.1.4 |
ausExtentStartingLBAHighStarting disk LBA (logical buffer address) used by this
extent (most significant 32 bits of 64 bit value).ro INTEGER .1.3.6.1.4.1.795.14.1.1001.1.1.5 |
ausExtentNumberOfBlocksLowNumber of disk blocks used by this extent (least
significant 32 bits of 64 bit value).ro INTEGER .1.3.6.1.4.1.795.14.1.1001.1.1.6 |
ausExtentNumberOfBlocksHighNumber of disk blocks used by this extent (most
significant 32 bits of 64 bit value).ro INTEGER .1.3.6.1.4.1.795.14.1.1001.1.1.7 |
ausExtentArrayMembershipIndex into the Adaptec Universal Storage array table
selecting the array of which this extent is a member.ro INTEGER .1.3.6.1.4.1.795.14.1.1001.1.1.8 |
ausSpare OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.1002 |
ausSpareTableA list of spares. SEQUENCE OF AusSpareEntry .1.3.6.1.4.1.795.14.1.1002.1 |
ausSpareEntryA spare entry. AusSpareEntry .1.3.6.1.4.1.795.14.1.1002.1.1 |
ausSpareIndexA unique index value for each spare beginning with 1.ro INTEGER .1.3.6.1.4.1.795.14.1.1002.1.1.1 |
ausSpareAusDeviceIndexIndex into the Adaptec Universal Storage device table
that describes the physical disk corresponding to this
spare.ro INTEGER .1.3.6.1.4.1.795.14.1.1002.1.1.2 |
ausSpareTypeSpecifies whether this is a global spare (allocated to a
controller), a dedicated spare (allocated to an array),
an external RAID global spare (allocated to an
external RAID controller), or a standby spare (allocated
to a controller).ro Enumeration .1.3.6.1.4.1.795.14.1.1002.1.1.3 |
ausSpareAusControllerOrArrayIndexIf this is a global spare, this field contains an index
into the Adaptec Universal Storage controller table
selecting the controller for which the spare relationship
exists. If this is a dedicated spare, this field
contains an index into the Adaptec Universal Storage
array table selecting the array for which the spare
relationship exists. If this is an external RAID global
spare, this field contains an index into the Adaptec
Universal Storage external RAID device table selecting
the controller for which the spare relationship exists.ro INTEGER .1.3.6.1.4.1.795.14.1.1002.1.1.4 |
ausEventLogCount OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.2000 |
ausEventLogNumEntriesThe number of entries in the Event Log.ro INTEGER .1.3.6.1.4.1.795.14.1.2000.1 |
ausEventLog OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.2001 |
ausEventLogTableA circular list of event log entries. The number of
entries is given by the value of eventLogCount. Current
maximum event log count is fixed at 256, but could be
programmable (via MIB variable and/or .INI file) in the
future. SEQUENCE OF AusEventLogEntry .1.3.6.1.4.1.795.14.1.2001.1 |
ausEventLogEntryAn event log entry. AusEventLogEntry .1.3.6.1.4.1.795.14.1.2001.1.1 |
ausEventLogTimeStampThe time stamp assigned this event by middleware, in
UNIX time_t format.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.2001.1.1.1 |
ausEventLogStringA text string containing the text of the event as
generated by middleware.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.2001.1.1.2 |
ausEventTypeA text string containing the type of the event as
generated by middleware.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.2001.1.1.3 |
ausEvenCodeA value containing the code of the event as
generated by middleware.ro INTEGER .1.3.6.1.4.1.795.14.1.2001.1.1.4 |
ausTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.795.14.1.9000 |
ausTrapMessageMessage delivered by the trap. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.9000.1 |
ausTrapObjectIndexAn index into a MIB table specifying the object associated
with the trap. If the index is 0, then an index is not
available (for example, for a deleted object). INTEGER .1.3.6.1.4.1.795.14.1.9000.2 |
ausTrapControllerTypeDescribes which type of controller generated this trap, and
therefore which table is indexed. Enumeration .1.3.6.1.4.1.795.14.1.9000.3 |
ausTrapControllerStatusStatus of the controller that generated this trap. Enumeration .1.3.6.1.4.1.795.14.1.9000.4 |
ausTrapDeviceStatusStatus of the device that generated this trap. Enumeration .1.3.6.1.4.1.795.14.1.9000.5 |
ausTrapEnclosureStatusStatus of the enclosure that generated this trap. Enumeration .1.3.6.1.4.1.795.14.1.9000.6 |
ausTrapEnclosureObjectOrdinalZero relative ordinal number of affected fan, temperature sensor, power supply,
slot, etc., in an enclosure. Field will be -1 if not needed (for example,
when the trap refers to the enclosure as a whole rather than a piece
of the enclosure). INTEGER .1.3.6.1.4.1.795.14.1.9000.7 |
ausTrapArrayStatusStatus of the array that generated this trap. Enumeration .1.3.6.1.4.1.795.14.1.9000.8 |
ausTrapArrayTaskStatusStatus of the array task that generated this trap. Enumeration .1.3.6.1.4.1.795.14.1.9000.9 |
ausTrapSpareStatusStatus of the spare that generated this trap. Enumeration .1.3.6.1.4.1.795.14.1.9000.10 |
ausTrapEnumAsTextA string corresponding to a trap enumeration value. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.795.14.1.9000.11 |