ACC-SERVICEPROFILE
AI MIB Summary
Standard SNMP MIB module defining data structures for ACC-SERVICEPROFILE.
37
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
37 total| Object Name |
|---|
accServiceProfile OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.65 |
IMPORTS Unknown .1.3.6.1.4.1.5.1.1.65 |
accServiceProfileTableThe Service Profile Table SEQUENCE OF AccServiceProfileEntry .1.3.6.1.4.1.5.1.1.65.1 |
accServiceProfileEntryAn entry in the Service Profile Table AccServiceProfileEntry .1.3.6.1.4.1.5.1.1.65.1.1 |
accServiceProfileNameThe name of the service profile. This name serves as the
index for accessing information in the Sevice Profile Table.
The service profile name is usually acquired from an entry
in the Called Number Table.ro DisplayString -- .1.3.6.1.4.1.5.1.1.65.1.1.1 |
accServiceProfileTypeThe type of service profile entry. MPBR is normal, multi-
protocol bridge/router service. CDNR is partitioned access
service via called number routing.rw Enumeration .1.3.6.1.4.1.5.1.1.65.1.1.2 |
accServiceProfileAdminStateThe administrative state of this service profile. If the
administrative state is set to disabled, no new connections
will be allowed using this profile, and all existing
connections using the profile will be terminated. If the
administrative state is set to drained, no new connections
will be accepted, but existing connections will be
maintained.rw Enumeration .1.3.6.1.4.1.5.1.1.65.1.1.3 |
accServiceProfileMsgLevelThe current severity level of trap messages that may be
generated regarding events associated with this service
profile. Only trap messages whose serverity level is less
than or equal to the current setting of this object will be
displayed.rw INTEGER .1.3.6.1.4.1.5.1.1.65.1.1.4 |
accServiceProfilePppDefaultThe method used to set default PPP parameters.
FACTORY indicates that factory defaults will be used or
default parameters will be obtained from the usual sources
(e.g., preconfigured dial ports). OVERRIDE indicates that
default parameters should be overriden using values
configured in this service profile.
This object has been obsoleted with release 11.1.rwobsolete Enumeration .1.3.6.1.4.1.5.1.1.65.1.1.5 |
accServiceProfileAuthMethodThe default PPP authentication method for this service
profile.rw Enumeration .1.3.6.1.4.1.5.1.1.65.1.1.6 |
accServiceProfilePortLimitThe maximum port limit for this service profile. A value
of 1 disables PPP multilink. A value greater than 1 enables
multilink negotiation.rw INTEGER .1.3.6.1.4.1.5.1.1.65.1.1.7 |
accServiceProfileAccessPartThe name of the access partition to use for this service. If
the service type is CDNR, an access partition name must be
configured and the corresponding access partition should be
defined in the Access Partition Table. Otherwise, this object
need not be configured.rw DisplayString -- .1.3.6.1.4.1.5.1.1.65.1.1.8 |
accServiceProfileModemPoolThe name of the modem pool to use for providing service
to switched users connecting via modems. If no modem
pool is configured, a default modem pool will be used to
provide service.rw DisplayString -- .1.3.6.1.4.1.5.1.1.65.1.1.9 |
accServiceProfileEntryStatusThe modification status of this service profile entry.
Setting the status to add causes a new entry to be added.
Setting the status to deleete causes an existing entry to be
deleted.rw Enumeration .1.3.6.1.4.1.5.1.1.65.1.1.10 |
accServiceProfileBusyCountThe number of internal resources currently bound to this
service profile. If the busy count is non-zero, the service
profile entry cannot be removed.ro Gauge .1.3.6.1.4.1.5.1.1.65.1.1.11 |
accServiceProfileNumAcceptsThe number of incoming or outgoing connection requests
accepted for this service profile.ro Counter .1.3.6.1.4.1.5.1.1.65.1.1.12 |
accServiceProfileNumRejectsThe number of incoming or outgoing connection requests
rejected for this service profile.ro Counter .1.3.6.1.4.1.5.1.1.65.1.1.13 |
accServiceProfileNumActiveThe current number of connected physical ports using this
service profile. Each physical link in a multilink bundle
counts as one connection.ro Gauge .1.3.6.1.4.1.5.1.1.65.1.1.14 |
accServiceProfileNumberGroupThe calling number group to use for incoming call
screening. The calling number group is defined in the
Calling Number Table. If the calling number group is 0, no
incoming call screening is performed for this service
profile.rw INTEGER .1.3.6.1.4.1.5.1.1.65.1.1.15 |
accServiceProfilePppMruThe default maximum receive unit to negotiate for the PPP
connection using this service profile.rw INTEGER .1.3.6.1.4.1.5.1.1.65.1.1.16 |
accServiceProfileMlpppMrruThe default maximum reassembly receive unit to negotiate
for the Multilink PPP connection using this service profile.rw INTEGER .1.3.6.1.4.1.5.1.1.65.1.1.17 |
accServiceProfileMlxStateThe default MLX administrative state for the Multilink
PPP connection using this service profile.
This object has been obsoleted with release 11.1.rwobsolete Enumeration .1.3.6.1.4.1.5.1.1.65.1.1.18 |
accServiceProfileWelcomeMessageThis is the string that will be displayed when PPP scripting
is enabled (sp LOGIN authentication mode) to welcome the user.
It will appear before the username/login prompt.rw DisplayString -- .1.3.6.1.4.1.5.1.1.65.1.1.19 |
accServiceProfileLoginPromptThis is the string that will be displayed when PPP scripting
is enabled (sp LOGIN authentication mode) to prompt the user
for entry of a username. It will appear after the
Welcome Message.rw DisplayString -- .1.3.6.1.4.1.5.1.1.65.1.1.20 |
accServiceProfilePasswordPromptThis is the string that will be displayed when PPP scripting
is enabled (sp LOGIN authentication mode) to prompt the user
for entry of a password. It will appear after the
Login Prompt.rw DisplayString -- .1.3.6.1.4.1.5.1.1.65.1.1.21 |
accServiceProfileServicePromptThis is the string that will be displayed when PPP scripting
is enabled (sp LOGIN authentication mode) after successful
authentication has occurred. It will appear after the password
prompt.rw DisplayString -- .1.3.6.1.4.1.5.1.1.65.1.1.22 |
accServiceProfileLoginTimeoutThe duration in seconds that the system will wait
for an answer to a login/password prompt. After this
timeout, the system will start normal PPP negotiation.
Zero disables timer (no timeout).rw INTEGER .1.3.6.1.4.1.5.1.1.65.1.1.23 |
accServiceProfileAuthPreferenceThe authentication preference for this service profile. This
This object is useful for altering the behavior of PPP
negotiation when providing service to clietns that cannot be
configured to deny negotiation of the stronger CHAP authentication
method and PAP authentication is required. PAP is the default setting.rw Enumeration .1.3.6.1.4.1.5.1.1.65.1.1.24 |
accServiceProfileAccountingOptnThe Accounting option for this service profile. This is
used to enable or disable RADIUS accounting for PPP sessions
associated with this service profile. RADIUS accounting is
enabled by default.rw Enumeration .1.3.6.1.4.1.5.1.1.65.1.1.25 |
accServiceProfileBandwidthMgmtThe bandwidth management protocols that can be negotiated for PPP
connections associated with this service profile.
BACP enables the negotiation of the Bandwidth Allocation Control
Protocol (BACP) and Bandwidth Allocation Protocol (BAP). This
is the default setting.
MLX enables the Multilink Extended (MLX) protocol. MLX is compatible
with MP+.
DEFAULT disables negotiation of BACP or MLX and uses local mechanisms
for adding bandwidth to PPP multilink connections.
ANY enables the negotiation of any supported management protocol.
This objects supercedes the accServiceProfileMlxState object that
was previously used to enable MLX negotiation.rw Enumeration .1.3.6.1.4.1.5.1.1.65.1.1.26 |
accServiceProfilePppIpCompThe VJ header compression option for this
service profile.rw Enumeration .1.3.6.1.4.1.5.1.1.65.1.1.27 |
accServiceProfilePortTableThe Service Profile Port Table SEQUENCE OF AccServiceProfilePortEntry .1.3.6.1.4.1.5.1.1.65.2 |
accServiceProfilePortEntryAn entry in the Service Profile Port Table AccServiceProfilePortEntry .1.3.6.1.4.1.5.1.1.65.2.1 |
accServiceProfileIfIndexThe interface index of the physical port associated with this
entry.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.5.1.1.65.2.1.1 |
accServiceProfileConfiguredNameThe name of the service profile configured for this physical
port.ro DisplayString -- .1.3.6.1.4.1.5.1.1.65.2.1.2 |
accServiceProfileActiveNameThe name of the service profile currently active for this
physical port. If a service profile has been manually
configured for this port, the active profile will always be the
same as the configured profile. Otherwise, the active
service profile is assigned dynamically when the physical
circuit is connected.ro DisplayString -- .1.3.6.1.4.1.5.1.1.65.2.1.3 |
accServiceProfileActiveTypeThe type of service associated with the active service
profile.ro Enumeration .1.3.6.1.4.1.5.1.1.65.2.1.4 |