ACC-SYSTEM
AI MIB Summary
Standard SNMP MIB module defining data structures for ACC-SYSTEM.
219
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
219 total| Object Name |
|---|
accSystem OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1 |
IMPORTS Unknown .1.3.6.1.4.1.5.1.1.1 |
accSysInfo OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.1 |
accUnitNameA printable ASCII string up to 32 octets long that is
used to refer to a physical unit. This name is used
in the prompt displayed at the maintenance terminal.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.1.1 |
accRomIdA printable ASCII string that contains information about
the hardware and the firmware (NOT the software).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.1.2 |
accSwVersionA printable ASCII string representing the software
version number of the running code.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.1.3 |
accResetA Set command on this object will cause an immediate reset
of the unit.rw INTEGER .1.3.6.1.4.1.5.1.1.1.1.4 |
accMemStatTableInformation about data buffer pools.
Instance is pool number.
1 - 7 is D RAM
8 is M RAM
9 - is C RAM
10 - is H RAM SEQUENCE OF AccMemStatEntry .1.3.6.1.4.1.5.1.1.1.1.5 |
accMemStatEntryA single entry in the Memory stats table AccMemStatEntry .1.3.6.1.4.1.5.1.1.1.1.5.1 |
accMemBlkEntSizeSize (bytes) of these buffersro INTEGER -- .1.3.6.1.4.1.5.1.1.1.1.5.1.1 |
accMemBlkEntTotalTotal number of these buffers in pool, whether
or not they are in usero INTEGER -- .1.3.6.1.4.1.5.1.1.1.1.5.1.2 |
accMemBlkEntMaxHigh water mark of usage of buffersro Gauge -- .1.3.6.1.4.1.5.1.1.1.1.5.1.3 |
accMemBlkEntInUseNumber of buffers currently in use.ro Gauge -- .1.3.6.1.4.1.5.1.1.1.1.5.1.4 |
accMemBlkEntFailsNumber of times requests were made for a buffer
of this size that failed because none were avaliable.ro Counter -- .1.3.6.1.4.1.5.1.1.1.1.5.1.5 |
accMemBlkEntTypeNumeric classification of the buffer.ro Enumeration .1.3.6.1.4.1.5.1.1.1.1.5.1.6 |
accMemBlkEntAllocsNumber of times a request was made for a buffer
of this size.ro Counter -- .1.3.6.1.4.1.5.1.1.1.1.5.1.7 |
accMemBlkEntInitialNumber of buffers of this size allocated at
initialization.ro INTEGER -- .1.3.6.1.4.1.5.1.1.1.1.5.1.8 |
accNvm OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.1.6 |
accNvmTotalBlksTotal number of NVM blocks.ro INTEGER .1.3.6.1.4.1.5.1.1.1.1.6.1 |
accNvmBlkSizeNVM block size in bytes.ro INTEGER .1.3.6.1.4.1.5.1.1.1.1.6.2 |
accNvmDirSizeThe NVM directory size.ro INTEGER .1.3.6.1.4.1.5.1.1.1.1.6.3 |
accNvmFreeBlksThe number of free NVM blocks.ro INTEGER .1.3.6.1.4.1.5.1.1.1.1.6.4 |
accNvmFileNumberThe NVM file number.ro INTEGER .1.3.6.1.4.1.5.1.1.1.1.6.5 |
accNvmFileNameThe NVM file name.ro OCTET STRING .1.3.6.1.4.1.5.1.1.1.1.6.6 |
accNvmFileSizeThe NVM file size in bytes.ro INTEGER .1.3.6.1.4.1.5.1.1.1.1.6.7 |
accSysConfigInfo OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.1.7 |
accConfigurationSet the action to perform on the active configuration.
A set to load or default will immediately reset the unit.
On the restart the new configuration (either a previously
saved one or the default configuration) will be used.rw Enumeration .1.3.6.1.4.1.5.1.1.1.1.7.1 |
accConfigurationStatusThe current state of the active configuration. The value
changed indicates that the active configuration has
changed since the last time it was saved to NVM.ro Enumeration .1.3.6.1.4.1.5.1.1.1.1.7.2 |
accScriptHaltA Set command on this object will cause an immediate
halt to any existing configuration script execution.rw INTEGER .1.3.6.1.4.1.5.1.1.1.1.8 |
accScriptCont OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.1.9 |
accScriptContServerThe IP address of the server holding the
configuration script to be downloaded and executed
following the next reset.rw IpAddress .1.3.6.1.4.1.5.1.1.1.1.9.1 |
accScriptContFileThe filename (with complete pathname) of the
configuration script to be downloaded and executed
following the next reset.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.1.9.2 |
accSysUpgradeCmdOn platforms that execute the application from Flash and
that support the optional Flash SIMM memory for TFTP
upgrades, it indicates the upgrade command (SL or TFTP).
If the optional Flash SIMM is not installed, maintenance
mode SL command is the only way to upgrade.ro OCTET STRING .1.3.6.1.4.1.5.1.1.1.1.10 |
accSysHWTypeThe hardware platform product namero Enumeration .1.3.6.1.4.1.5.1.1.1.1.11 |
accSysProcTypeType of processor on this platformro Enumeration .1.3.6.1.4.1.5.1.1.1.1.12 |
accSysLocalRamThe amount of local RAM installed in the system
in kilobytesro INTEGER .1.3.6.1.4.1.5.1.1.1.1.13 |
accSysGlobalRamThe amount of global RAM installed in the system
in kilobytesro INTEGER .1.3.6.1.4.1.5.1.1.1.1.14 |
accSysPowerSupplyType of processor on this platformro Enumeration .1.3.6.1.4.1.5.1.1.1.1.15 |
accMemPoolTableA table of memory pools supported by this unit.
Each pool describes a physical memory resource. SEQUENCE OF AccMemPoolEntry .1.3.6.1.4.1.5.1.1.1.1.16 |
accMemPoolEntryAn entry of information about a memory pool. AccMemPoolEntry .1.3.6.1.4.1.5.1.1.1.1.16.1 |
accMemPoolNameA printable ASCII string describing this
memory pool.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.1.16.1.1 |
accMemPoolMaximumThe maximum amount of memory in this memory pool.ro Gauge .1.3.6.1.4.1.5.1.1.1.1.16.1.2 |
accMemPoolBytesThe amount of memory currently available
in this memory pool.ro Gauge .1.3.6.1.4.1.5.1.1.1.1.16.1.3 |
accMemPoolFragsThe number of times this memory pool has been
fragmented.ro Gauge .1.3.6.1.4.1.5.1.1.1.1.16.1.4 |
accMemPoolAlignThe alignment this memory pool maintains. For
example, a 4 in this field means memory from this
pool is aligned on 32-bit boundaries.ro INTEGER .1.3.6.1.4.1.5.1.1.1.1.16.1.5 |
accMemPoolAllocsThe number of allocation requests addressed to
this memory pool.ro Counter .1.3.6.1.4.1.5.1.1.1.1.16.1.6 |
accMemPoolFailsThe number of times an allocation request addressed
to this memory could not be satisfied.ro Counter .1.3.6.1.4.1.5.1.1.1.1.16.1.7 |
accMemAddDblkNumber of D blocks added.ro INTEGER .1.3.6.1.4.1.5.1.1.1.1.17 |
accSlvConfTableTable of slave CPU configuration parameters. SEQUENCE OF AccSlvConfEntry .1.3.6.1.4.1.5.1.1.1.1.18 |
accSlvConfEntryA single entry in the slave CPU configuration Table AccSlvConfEntry .1.3.6.1.4.1.5.1.1.1.1.18.1 |
accSlvConfCPUIndexSlave CPU Indexro INTEGER .1.3.6.1.4.1.5.1.1.1.1.18.1.1 |
accSlvConfCPUIDSlave CPU IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.1.18.1.2 |
accSlvConfSysDescSlave CPU System Descriptionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.1.18.1.3 |
accSlvConfSWVersSlave CPU Software Versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.1.18.1.4 |
accSlvConfProcTypeSlave CPU Processor Typero Enumeration .1.3.6.1.4.1.5.1.1.1.1.18.1.5 |
accSlvConfLocalRamSlave CPU Local RAM Size (kb)ro INTEGER .1.3.6.1.4.1.5.1.1.1.1.18.1.6 |
accSlvConfGlobalRamSlave CPU Global RAM Size (kb)ro INTEGER .1.3.6.1.4.1.5.1.1.1.1.18.1.7 |
accSlvMemBlkTableTable of entries in the slave CPU configuration Table. SEQUENCE OF AccSlvMemBlkEntry .1.3.6.1.4.1.5.1.1.1.1.19 |
accSlvMemBlkEntryA single entry in the slave CPU configuration Table AccSlvMemBlkEntry .1.3.6.1.4.1.5.1.1.1.1.19.1 |
accSlvMemCPUIDSlave CPU IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.1.19.1.3 |
accSlvMemBlkEntSizeSize (bytes) of these buffersro INTEGER .1.3.6.1.4.1.5.1.1.1.1.19.1.4 |
accSlvMemBlkEntTotalTotal number of these buffers in pool, whether
or not they are in usero INTEGER .1.3.6.1.4.1.5.1.1.1.1.19.1.5 |
accSlvMemBlkEntMaxHigh water mark of usage of buffersro Gauge .1.3.6.1.4.1.5.1.1.1.1.19.1.6 |
accSlvMemBlkEntInUseNumber of buffers currently in use.ro Gauge .1.3.6.1.4.1.5.1.1.1.1.19.1.7 |
accSlvMemBlkEntFailsNumber of times requests were made for a buffer
of this size that failed because none were avaliable.ro Counter .1.3.6.1.4.1.5.1.1.1.1.19.1.8 |
accSlvMemBlkEntTypeNumeric classification of the buffer.ro Enumeration .1.3.6.1.4.1.5.1.1.1.1.19.1.9 |
accSlvMemBlkEntAllocsNumber of times a request was made for a buffer
of this size.ro Counter .1.3.6.1.4.1.5.1.1.1.1.19.1.10 |
accSlvMemPool OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.1.20 |
accSlvMemPoolTableA table of memory pools supported by this unit.
Each pool describes a physical memory resource. SEQUENCE OF AccSlvMemPoolEntry .1.3.6.1.4.1.5.1.1.1.1.20.1 |
accSlvMemPoolEntryAn entry of information about a memory pool. AccSlvMemPoolEntry .1.3.6.1.4.1.5.1.1.1.1.20.1.1 |
accSlvMemPoolCPUIDSlave CPU IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.1.20.1.1.1 |
accSlvMemPoolNameA printable ASCII string describing this
memory pool.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.1.20.1.1.2 |
accSlvMemPoolMaximumThe maximum amount of memory in this memory pool.ro Gauge .1.3.6.1.4.1.5.1.1.1.1.20.1.1.3 |
accSlvMemPoolBytesThe amount of memory currently available
in this memory pool.ro Gauge .1.3.6.1.4.1.5.1.1.1.1.20.1.1.4 |
accSlvMemPoolFragsThe number of times this memory pool has been
fragmented.ro Gauge .1.3.6.1.4.1.5.1.1.1.1.20.1.1.5 |
accSlvMemPoolAlignThe alignment this memory pool maintains. For
example, a 4 in this field means memory from this
pool is aligned on 32-bit boundaries.ro INTEGER .1.3.6.1.4.1.5.1.1.1.1.20.1.1.6 |
accSlvMemPoolAllocsThe number of allocation requests addressed to
this memory pool.ro Counter .1.3.6.1.4.1.5.1.1.1.1.20.1.1.7 |
accSlvMemPoolFailsThe number of times an allocation request addressed
to this memory could not be satisfied.ro Counter .1.3.6.1.4.1.5.1.1.1.1.20.1.1.8 |
accSlvSysTableInformation about slave CPU system stats. SEQUENCE OF AccSlvSysEntry .1.3.6.1.4.1.5.1.1.1.1.21 |
accSlvSysEntryA single entry in the slave CPU system stats table AccSlvSysEntry .1.3.6.1.4.1.5.1.1.1.1.21.1 |
accSlvSysUpTimeSlave system uptimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.5.1.1.1.1.21.1.1 |
accSlvSysCpuAvgShortSlave system current CPU usage.ro INTEGER .1.3.6.1.4.1.5.1.1.1.1.21.1.2 |
accSlvSysCpuAvgLongSlave system average CPU usage.ro INTEGER .1.3.6.1.4.1.5.1.1.1.1.21.1.3 |
accMem OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.1.22 |
accMemDblkIncTableTable of Memory Dblock Increments SEQUENCE OF AccMemDblkIncEntry .1.3.6.1.4.1.5.1.1.1.1.22.1 |
accMemDblkIncEntryA single entry of the Memory Dblock Increment Table AccMemDblkIncEntry .1.3.6.1.4.1.5.1.1.1.1.22.1.1 |
accMemDblkIndexThe index of this entry in the Memory Dblock Increment Tablero INTEGER .1.3.6.1.4.1.5.1.1.1.1.22.1.1.1 |
accMemDblkSizeThe Size of the Dblock for this entry in the Mem Dblock Inc Tablero INTEGER .1.3.6.1.4.1.5.1.1.1.1.22.1.1.2 |
accMemDblkIncrementThe User specified Increment of this entry Memory Dblock Increment
Tablerw INTEGER .1.3.6.1.4.1.5.1.1.1.1.22.1.1.3 |
accOpt OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.1.22.2 |
accMemEMEStatusThe Global Memory Optimizer (EME) Statusrw Enumeration .1.3.6.1.4.1.5.1.1.1.1.22.2.1 |
accMemEMEMaxReclMemThe Maximum Memory in bytes available for Reclaimation by the
Memory Optimizer (EME)ro INTEGER .1.3.6.1.4.1.5.1.1.1.1.22.2.2 |
accMemEMECurReclMemThe Memory in bytes Reclaimed by the Memory Optimizer (EME)ro INTEGER .1.3.6.1.4.1.5.1.1.1.1.22.2.3 |
accMemOptTableTable of Memory Optimizer SEQUENCE OF AccMemOptEntry .1.3.6.1.4.1.5.1.1.1.1.22.2.4 |
accMemOptEntryA single entry of the Memory Optimizer Table AccMemOptEntry .1.3.6.1.4.1.5.1.1.1.1.22.2.4.1 |
accMemOptimiserFeatureThe Reclaimable Feature in the Memory Optimizer Table for this entryro OCTET STRING .1.3.6.1.4.1.5.1.1.1.1.22.2.4.1.1 |
accMemOptimiserMemoryThe amount of memory (in bytes) associated with the reclaimable
feature under considerationro INTEGER .1.3.6.1.4.1.5.1.1.1.1.22.2.4.1.2 |
accMemOptimiserPrefThe User's preference for this Featurerw Enumeration .1.3.6.1.4.1.5.1.1.1.1.22.2.4.1.3 |
accMemOptimiserStatusThe Current Status for this Featurero Enumeration .1.3.6.1.4.1.5.1.1.1.1.22.2.4.1.4 |
accMacro OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.1.23 |
accMacroExecuteMacro Name to Executerw Enumeration .1.3.6.1.4.1.5.1.1.1.1.23.1 |
accSwRegistrationKeySoftware Registration key to upgrade
software levels.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.1.24 |
accMACAddr OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.1.25 |
accSysMACAddrUserMAC address to be used to override rom MAC address.
A value of 0 means use the value stored in rom. Any
other value, overrides the ROM MAC address.rw OCTET STRING -- .1.3.6.1.4.1.5.1.1.1.1.25.1 |
accSysMessage OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.1.26 |
accSysMsgInfo OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.1.26.1 |
accSysMsgLevelThe severity level of system message
allowed to be generatedrw INTEGER .1.3.6.1.4.1.5.1.1.1.1.26.1.1 |
accWinDefLenNetmanThe session window default length NETMANrw INTEGER .1.3.6.1.4.1.5.1.1.1.1.26.1.2 |
accWinDefLenPublicThe session window default length PUBLICrw INTEGER .1.3.6.1.4.1.5.1.1.1.1.26.1.3 |
accWinDefWidNetmanThe session window default width NETMANrw INTEGER .1.3.6.1.4.1.5.1.1.1.1.26.1.4 |
accWinDefWidPublicThe session window default width PUBLICrw INTEGER .1.3.6.1.4.1.5.1.1.1.1.26.1.5 |
accUserInfo OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.1.26.2 |
accUserTrapMsgEntryA message to be sent through an SNMP trap.rw DisplayString -- .1.3.6.1.4.1.5.1.1.1.1.26.2.1 |
accVirtualPort OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.1.30 |
accVirtualPortGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.1.30.1 |
accVirtualPortCountNumber of Virtual ports available on the platformrw INTEGER .1.3.6.1.4.1.5.1.1.1.1.30.1.1 |
accVirtualPortXotCountNumber of XOT Virtual ports available on the platformrw INTEGER .1.3.6.1.4.1.5.1.1.1.1.30.1.2 |
accSystemGracefulShutdown OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.1.32 |
accSystemGracefulShutdownStateSystem Graceful Shutdown staterw Enumeration .1.3.6.1.4.1.5.1.1.1.1.32.1 |
accSystemGracefulShutdownTOSystem graceful shutdown timeout. When Timeout is exceeded, the system will reset automaticallyrw INTEGER .1.3.6.1.4.1.5.1.1.1.1.32.2 |
accSystemAuthGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.1.33 |
accSystemAuthModeSystem authentication moderw Enumeration .1.3.6.1.4.1.5.1.1.1.1.33.1 |
accSystemAuthAccessPartAccess Partn for RADIUS serversrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.1.33.2 |
accSystemAccess OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.1.34 |
accPscopeEnablePermits or denies use of built-in packet
monitoring functionality (PSCOPE)rw Enumeration .1.3.6.1.4.1.5.1.1.1.1.34.1 |
accDBscopeCntlControls use of built-in debugger
functionality (DBSCOPE).
Currently non-zero permits full functionality.rw INTEGER .1.3.6.1.4.1.5.1.1.1.1.34.2 |
accSessionCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.2 |
accLoginA read attempt of this object is interpreted as a request
for login to the unit. The instance is an ASCII string
with the following (case sensitive) format:
CommunityString:Password
The GetResponse-PDU will return the accUnitName of the unit.
A write attempt is interpreted as a request to change
the password.
A GetNextRequest will not acknowledge the presence
of this object.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.2.1 |
accLogoutA read attempt of this object is interpreted as a request
for logout to the unit. The instance is an ASCII string
with the following format:
CommunityString:Password
A GetNextRequest will not acknowledge the presence
of this object.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.2.2 |
accLoginTimeoutSession inactivity timer.
Zero disables timer (no timeout)
Default value is zero
Range is 0-86400 secondsrw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.5.1.1.1.2.3 |
accTrapTableA table of systems to which Trap Messages generated
by this unit shall be sent.
To delete an entry, a SetRequest-PDU for the specific
instance of accTrapAddr with a NULL value encoding is
used. SEQUENCE OF AccTrapEntry .1.3.6.1.4.1.5.1.1.1.3 |
accTrapEntryA Trap Table entry AccTrapEntry .1.3.6.1.4.1.5.1.1.1.3.1 |
accTrapAddrAn IP address to which SNMP traps generated by the unit
are sent.rw IpAddress .1.3.6.1.4.1.5.1.1.1.3.1.1 |
accTrapSeverityseverity level of the traps to be sent
ACC products generate enterprise specific traps for which
different severity levels from 1 through 7 are assigned.
Level 1 refers to Only SNMP traps. Level 2 are
specific traps of highest urgency, and thus progressively
each level get more verbose. The normal operational level
is expected to be 3 or 4. Higher levels (i.e., 5-7) are
expected to generate many events which may be helpful
in identifying/isolating configuration related problems,
but may affect the performance of the unit.rw INTEGER .1.3.6.1.4.1.5.1.1.1.3.1.2 |
accClock OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.4 |
accDateThe octet string of six bytes representing the date
and time has the following format:
YYMMDDHHMMSS
where the valid range of values for each of the bytes
is as follows:
YY 0..99
MM 1..12
DD 1..31
HH 0..23
MM 0..59
SS 0..59rwdeprecated OCTET STRING .1.3.6.1.4.1.5.1.1.1.4.1 |
accUToffset3-byte date string, HH MM SSrw OCTET STRING .1.3.6.1.4.1.5.1.1.1.4.2 |
accSysBootTime3-byte date string, HH MM SSrodeprecated OCTET STRING .1.3.6.1.4.1.5.1.1.1.4.3 |
accSysCpuAvgShortpercentage CPU used over the last minutero INTEGER .1.3.6.1.4.1.5.1.1.1.4.4 |
accSysCpuAvgLongpercentage CPU used over the last 5 minutesro INTEGER .1.3.6.1.4.1.5.1.1.1.4.5 |
accSysDataSwitchStatusThe status of the hardware switch, to determine
whether Data calls could be initiated/accepted over the
ISDN line. ONLY voice calls will be accepted or initiated
when this h/w switch status is OFF.ro Enumeration .1.3.6.1.4.1.5.1.1.1.4.6 |
accSysLastConfigSystem Last Configuration Timerw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.5.1.1.1.4.8 |
accDateY2KThe seven byte long octet string indicates system date and
time. The octet string represents year 2000 compliant
date and time, and is laid out in the following
structured format:
2 Byte unsigned short value of year
1 Byte value of month
1 Byte value of day of the month
1 Byte value of hour
1 Byte value of minutes
1 Byte value of seconds
The valid range of values for each of the component
is as follows:
year 0..2079
month 1..12
day 1..31
hour 0..23
minutes 0..59
seconds 0..59rw OCTET STRING .1.3.6.1.4.1.5.1.1.1.4.10 |
accSysBootTimeY2KThe seven bytes long octet string indicates system boot
time. The octet string represents year 2000 compliant
date and time, and is laid out in the following
structured format:
2 Byte unsigned short value of year
1 Byte value of month
1 Byte value of day of the month
1 Byte value of hour
1 Byte value of minutes
1 Byte value of secondsro OCTET STRING .1.3.6.1.4.1.5.1.1.1.4.11 |
accDayDay of the week (enumnerated MON-SUN [0-6])rw Enumeration .1.3.6.1.4.1.5.1.1.1.4.12 |
accAccessTableA table of users authorized to log in to this unit.
To delete an entry, a SetRequest-PDU for the specific
instance of accAccessAddr with a NULL value encoding is
used. SEQUENCE OF AccAccessEntry .1.3.6.1.4.1.5.1.1.1.6 |
accAccessEntryAn entry of information about an authorized user. AccAccessEntry .1.3.6.1.4.1.5.1.1.1.6.1 |
accAccessCmtyAccess communityrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.6.1.1 |
accAccessAddrIP address from which a login request is honored.rw IpAddress .1.3.6.1.4.1.5.1.1.1.6.1.2 |
accAccessNetMaskSubnet mask used to validate login requests.rw IpAddress .1.3.6.1.4.1.5.1.1.1.6.1.3 |
accAccessUdpPortUDP port number of the SNMP application.rw INTEGER .1.3.6.1.4.1.5.1.1.1.6.1.4 |
accReloadTime until system reload shall occur.
Upon expiry of the timer, the system will load
and execute a new image of the application code.
The load file will come from diskette, local
EPROM, or over the network, depending on the
configuration of the unit.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.5.1.1.1.7 |
accIfNames OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.8 |
accIfNumNamesNumber of interfaces (physical and logical).
There are this many entries in the Name table.ro INTEGER .1.3.6.1.4.1.5.1.1.1.8.1 |
accIfNameTableA table of of mnemonic 'names' for physical and
logical interfaces SEQUENCE OF AccIfNameEntry .1.3.6.1.4.1.5.1.1.1.8.2 |
accIfNameEntryAn entry in the Interface Name table AccIfNameEntry .1.3.6.1.4.1.5.1.1.1.8.2.1 |
accIfNameIndexInterface numberro INTEGER .1.3.6.1.4.1.5.1.1.1.8.2.1.1 |
accIfNameMnemonic name for this interfacerw DisplayString -- .1.3.6.1.4.1.5.1.1.1.8.2.1.2 |
accIfNameDefaultDefault Mnemonic name for this interface. The
interface may always be referred to by this name.ro DisplayString -- .1.3.6.1.4.1.5.1.1.1.8.2.1.3 |
accIfGroupTableA table of interface group descriptors supported by
this unit. Interface groups may be populated by
physical or logical interfaces, or combinations of
the two. SEQUENCE OF AccIfGroupEntry .1.3.6.1.4.1.5.1.1.1.9 |
accIfGroupEntryAn entry of information about an interface group. AccIfGroupEntry .1.3.6.1.4.1.5.1.1.1.9.1 |
accIFGroupIndexIndex for the accIfGroupTable.ro INTEGER .1.3.6.1.4.1.5.1.1.1.9.1.1 |
accIFGroupNameIf accIFGroupIndexBase and accIFGroupIndexMax
are equal then this object provides the full
name of the port, else this object has the prefix
of the port name. If this is a prefix then the
suffix is a numeric value from 1 to
(accIFGroupIndexMax - accIFGroupIndexBase + 1).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.9.1.2 |
accIFGroupTypeType of port groupro Enumeration .1.3.6.1.4.1.5.1.1.1.9.1.3 |
accIFGroupIndexBaseLowest IFIndex in this IFGroupro INTEGER .1.3.6.1.4.1.5.1.1.1.9.1.4 |
accIFGroupIndexMaxThe number of interfaces supported in this
IFGroupro INTEGER .1.3.6.1.4.1.5.1.1.1.9.1.5 |
accIFGroupNameDefaultIf accIFGroupIndexBase and accIFGroupIndexMax
are equal then this object provides the full
name of the port, else this object has the prefix
of the port name. If this is a prefix then the
suffix is a numeric value from 1 to
(accIFGroupIndexMax - accIFGroupIndexBase + 1).
The interface group may always be referenced by
this name. It cannot be changed by the user.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.9.1.6 |
accTrapLog OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.10 |
accTrapLogLevelThe base severity level at which traps are recorded
in the log. Traps with values greater than this level
will not be recorded in the log.rw INTEGER .1.3.6.1.4.1.5.1.1.1.10.1 |
accTrapLogSaveActionSetting the value to save-now writes the current trap log
to permanent storage.rw Enumeration .1.3.6.1.4.1.5.1.1.1.10.2 |
accTrapLogBufSizeThe trap log buffer size in kilobytes.rw INTEGER .1.3.6.1.4.1.5.1.1.1.10.3 |
accTrapLogTableThe trap logging table. SEQUENCE OF AccTrapLogEntry .1.3.6.1.4.1.5.1.1.1.10.4 |
accTrapLogEntryA single trap log entry. AccTrapLogEntry .1.3.6.1.4.1.5.1.1.1.10.4.1 |
accTrapLogTblTimeSysUpTime when trap occurred.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.5.1.1.1.10.4.1.1 |
accTrapLogTblTypeSysUpTime when trap occurred.ro Enumeration .1.3.6.1.4.1.5.1.1.1.10.4.1.2 |
accTrapLogTblLevelThe severity level associated with this trap.ro INTEGER .1.3.6.1.4.1.5.1.1.1.10.4.1.3 |
accTrapLogTblDataThe text message of the trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.10.4.1.4 |
accTrapLogSeqNumThe Global Sequence Number for all Traps
generated in the Systemro Counter .1.3.6.1.4.1.5.1.1.1.10.4.1.6 |
accTrapLogSeverityTypeSeverity type of the Trap generatedro Enumeration .1.3.6.1.4.1.5.1.1.1.10.4.1.7 |
accTrapLogEnterpriseOIDEnterprise OID for the sent trapro OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.10.4.1.8 |
accSpecificTrapNumSpecific Trap numberro INTEGER .1.3.6.1.4.1.5.1.1.1.10.4.1.9 |
accTrapLogSumTableThe trap logging table. SEQUENCE OF AccTrapLogSumEntry .1.3.6.1.4.1.5.1.1.1.10.5 |
accTrapLogSumEntryA single trap log entry. AccTrapLogSumEntry .1.3.6.1.4.1.5.1.1.1.10.5.1 |
accTrapLogSumTimeSysUpTime when trap occurred.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.5.1.1.1.10.5.1.1 |
accTrapLogSumTypeThe type of trap associated with this entry.ro Enumeration .1.3.6.1.4.1.5.1.1.1.10.5.1.2 |
accTrapLogSumDataThe text message of the trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.10.5.1.3 |
accSeepTableThe SEEP information table. SEQUENCE OF AccSeepEntry .1.3.6.1.4.1.5.1.1.1.13 |
accSeepEntryA single SEEP information table entry. AccSeepEntry .1.3.6.1.4.1.5.1.1.1.13.1 |
accSeepEntrySlotThe slot from which the SEEP information is taken.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.13.1.1 |
accSeepEntryTypeThe type of SEEP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.13.1.2 |
accSeepEntrySerialThe serial number of the SEEP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.13.1.3 |
accSeepEntryAssemblyThe assembly description of the SEEP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.13.1.4 |
accSeepEntryRevThe revision number of the SEEP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.13.1.5 |
accSeepEntryDateThe date contained in the SEEP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.13.1.6 |
accStandbyInfo OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.14 |
accStandbySysDescrSystem description for redundant processor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.14.1 |
accStandbySoftwareVersionSoftware version of redundant processor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.14.2 |
accStandbySysProcTypeSystem description for redundant processor.ro Enumeration .1.3.6.1.4.1.5.1.1.1.14.3 |
accStandbySysLocalRamLocal RAM size for redundant processor in kilobytes.ro INTEGER .1.3.6.1.4.1.5.1.1.1.14.4 |
accStandbySysGlobalRamGlobal RAM size for redundant processor in kilobytes.ro INTEGER .1.3.6.1.4.1.5.1.1.1.14.5 |
accStandbyFsVolStatusFlash volume status for redundant processor.ro Enumeration .1.3.6.1.4.1.5.1.1.1.14.6 |
accStandbyFsCfgStatusConfiguration status for redundant processor.ro Enumeration .1.3.6.1.4.1.5.1.1.1.14.7 |
accStandbyFsLoadFtkFileCurrent flash toolkit file redundant processor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.14.8 |
accStandbyFsLoadAplFileCurrent application file for redundant processor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.14.9 |
accStandbyFsLoadDiaFileCurrent application file for redundant processor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.14.10 |
accStandbySysHwVersHardware versions for redundant processor.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.14.11 |
accSyslogTableA table of systems to which Syslog Messages generated
by this unit shall be sent.
To delete an entry, a SetRequest-PDU for the specific
instance of accSyslogAddr with a NULL value encoding is
used. SEQUENCE OF AccSyslogEntry .1.3.6.1.4.1.5.1.1.1.15 |
accSyslogEntryA Syslog Table entry AccSyslogEntry .1.3.6.1.4.1.5.1.1.1.15.1 |
accSyslogAddrAn IP address to which syslog messages generated by the unit
are sent.rw IpAddress .1.3.6.1.4.1.5.1.1.1.15.1.1 |
accSyslogSeverityseverity level of the messages to be sent.rw INTEGER .1.3.6.1.4.1.5.1.1.1.15.1.2 |
accSyslogFacilityFacility identifier to use in syslog messagesrw INTEGER .1.3.6.1.4.1.5.1.1.1.15.1.3 |
accIcpTraps OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.1.16 |
accIcpInfoTrapIndicates that status data ring full while writing
data passed in status calls into structure used for
passing status data.
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIcpTrapMsg }
PCAUSE-DEFAULT: 32 TRAP-TYPE .1.3.6.1.4.1.5.1.1.1.16.0.1 |
accIcpTrapMsgICP Trap Messagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.1.16.1 |
accTrapSequencingStatusIndicates trap sequencing feature is On or Off. When
set to On, a accTrapLogSeqNum varbind will be
appended to every trap issued by the system, and will
always be the last varbindrw Enumeration .1.3.6.1.4.1.5.1.1.1.18 |
accSystemServiceTableA table of changeable TCP/UDP services. SEQUENCE OF AccSystemServiceEntry .1.3.6.1.4.1.5.1.1.1.26 |
accSystemServiceEntryAn entry of information about System Service. AccSystemServiceEntry .1.3.6.1.4.1.5.1.1.1.26.1 |
accSystemServiceThis object is used to identify the TCP/UDP service
whose port number is being changed.rw Enumeration .1.3.6.1.4.1.5.1.1.1.26.1.1 |
accSystemPortThis object is used to set the TCP/UDP service port
associated with various system services.rw INTEGER .1.3.6.1.4.1.5.1.1.1.26.1.2 |