ACC-RADIUS
AI MIB Summary
Standard SNMP MIB module defining data structures for ACC-RADIUS.
83
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
83 total| Object Name |
|---|
accRadius OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.44 |
IMPORTS Unknown .1.3.6.1.4.1.5.1.1.44 |
accRadiusNASIdentifierThe string used to identify the NAS to a Radius serverrw OCTET STRING .1.3.6.1.4.1.5.1.1.44.1 |
accRadiusInvAttribActionInvalid Attribute Actionrw INTEGER .1.3.6.1.4.1.5.1.1.44.2 |
accRadiusMaxPortThe maximum number of simultaneous calls that can be authenticated
using the Radius protocolrw INTEGER .1.3.6.1.4.1.5.1.1.44.3 |
accRadiusPortRangeStartThe ifIndex for the start of the Radius port range.ro INTEGER .1.3.6.1.4.1.5.1.1.44.4 |
accRadiusPortRangeEndThe ifIndex for the end of the Radius port range.ro INTEGER .1.3.6.1.4.1.5.1.1.44.5 |
accRadiusAuth OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.44.6 |
accRadiusAuthServTableTable of Radius authentication Server Information SEQUENCE OF AccRadiusAuthServEntry .1.3.6.1.4.1.5.1.1.44.6.1 |
accRadiusAuthServEntryA single Radius authentication server configuration and status AccRadiusAuthServEntry .1.3.6.1.4.1.5.1.1.44.6.1.1 |
accRadiusAuthServIndexThe index of this entry in the server tablerw INTEGER .1.3.6.1.4.1.5.1.1.44.6.1.1.1 |
accRadiusAuthServAdStateThe administrative state of the server entry. Enables (and creates
if not present), disables or deletes a server entryrw Enumeration .1.3.6.1.4.1.5.1.1.44.6.1.1.2 |
accRadiusAuthServAddrThe IP address of the authentication serverrw IpAddress .1.3.6.1.4.1.5.1.1.44.6.1.1.3 |
accRadiusAuthServPasswordThe secret shared between the NAS and the authentication serverrw OCTET STRING .1.3.6.1.4.1.5.1.1.44.6.1.1.4 |
accRadiusAuthServRetryIntThe time in seconds to wait for a reply for an access-request from
sent to the authentication serverrw INTEGER .1.3.6.1.4.1.5.1.1.44.6.1.1.5 |
accRadiusAuthServRetryCntsThe number of times to attempt to send an access-request to a serverrw INTEGER .1.3.6.1.4.1.5.1.1.44.6.1.1.6 |
accRadiusAuthServUDPPortThe destination UDP port number on the server to send an
access-request torw INTEGER .1.3.6.1.4.1.5.1.1.44.6.1.1.7 |
accRadiusAuthServOpStateThe operational state of a server entry. UP for a server that
has responded to the last request sent to it. DOWN for a server
that did not respond to the last request sent to it.
UNKNOWN for a server that we have not recently sent a request to.
DISABLED for a server entry whose admin state is DISABLEDro Enumeration .1.3.6.1.4.1.5.1.1.44.6.1.1.8 |
accRadiusAuthServReqCntsThe number of access-requests that have been sent to a serverro Counter .1.3.6.1.4.1.5.1.1.44.6.1.1.9 |
accRadiusAuthServAccCntsThe number of access accepts that have been received from a serverro Counter .1.3.6.1.4.1.5.1.1.44.6.1.1.10 |
accRadiusAuthServRejCntsThe number of access rejects that have ben received from a serverro Counter .1.3.6.1.4.1.5.1.1.44.6.1.1.11 |
accRadiusAuthServAccessPartThe access partition associated with this authentication
server. If an access partition name has been configured, this
authentication server will only by used to process requests
associated with the indicated access partition. This object
may also be used to configure the name of a proxy server.rwobsolete DisplayString -- .1.3.6.1.4.1.5.1.1.44.6.1.1.12 |
accRadiusAuthServSecureCertain attributes are considered secure as the
values set may comprimise access partitions. A server
must have this object set to secure to support sending
these secure attributes to the NAS.rw Enumeration .1.3.6.1.4.1.5.1.1.44.6.1.1.13 |
accRadiusAuthMsgLvlThe diagnostic message level for Radius authentication.rw INTEGER .1.3.6.1.4.1.5.1.1.44.6.2 |
accRadiusAuthRecoverTOThe time a server entry will remain in the DOWN
state before transitioning to UNKNOWNrw INTEGER .1.3.6.1.4.1.5.1.1.44.6.3 |
accRadiusAuthReqDiscsthe number of authentication server requests discardedrw Counter .1.3.6.1.4.1.5.1.1.44.6.4 |
accRadiusAuthRespDiscsthe number of authentication server responses discardedrw Counter .1.3.6.1.4.1.5.1.1.44.6.5 |
accRadiusAuthLastUserThe user name of the last caller we performed Radius authentication forro OCTET STRING .1.3.6.1.4.1.5.1.1.44.6.6 |
accRadiusAuthLastTypeThe type of the last Radius authentication frame received/transmittedrw Enumeration .1.3.6.1.4.1.5.1.1.44.6.7 |
accRadiusAuthCallsRejsThe number of calls rejected due to no replies being received from
configured serversrw Counter .1.3.6.1.4.1.5.1.1.44.6.8 |
accRadiusAuthConfigErrsthe number of dynamic configuration errorsrw Counter .1.3.6.1.4.1.5.1.1.44.6.9 |
accRadiusAuthDebugTableTable of Radius User Debug Sessions SEQUENCE OF AccRadiusAuthDebugEntry .1.3.6.1.4.1.5.1.1.44.6.10 |
accRadiusAuthDebugEntryA single Radius authentication user debug session AccRadiusAuthDebugEntry .1.3.6.1.4.1.5.1.1.44.6.10.1 |
accRadiusAuthDebugNameThe name of the user to run a debug session forrw OCTET STRING .1.3.6.1.4.1.5.1.1.44.6.10.1.1 |
accRadiusAuthDebugMaskThe debug mask to use for the users debug sessionrw INTEGER .1.3.6.1.4.1.5.1.1.44.6.10.1.2 |
accRadiusAcct OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.44.7 |
accRadiusAcctServTableTable of Radius accounting Server Information SEQUENCE OF AccRadiusAcctServEntry .1.3.6.1.4.1.5.1.1.44.7.1 |
accRadiusAcctServEntryA single Radius accounting server configuration and status AccRadiusAcctServEntry .1.3.6.1.4.1.5.1.1.44.7.1.1 |
accRadiusAcctServIndexThe index of this entry in the server tablerw INTEGER .1.3.6.1.4.1.5.1.1.44.7.1.1.1 |
accRadiusAcctServAdStateThe administrative state of the server entry. Enables (and creates
if not present), disables or deletes a server entryrw Enumeration .1.3.6.1.4.1.5.1.1.44.7.1.1.2 |
accRadiusAcctServAddrThe IP address of the accounting serverrw IpAddress .1.3.6.1.4.1.5.1.1.44.7.1.1.3 |
accRadiusAcctServPasswordThe secret shared between the NAS and the accounting serverrw OCTET STRING .1.3.6.1.4.1.5.1.1.44.7.1.1.4 |
accRadiusAcctServRetryIntThe time in seconds to wait for a reply for an accounting-request from
sent to the accounting serverrw INTEGER .1.3.6.1.4.1.5.1.1.44.7.1.1.5 |
accRadiusAcctServRetryCntsThe number of times to attempt to send an accounting-request to
a serverrw INTEGER .1.3.6.1.4.1.5.1.1.44.7.1.1.6 |
accRadiusAcctServUDPPortThe destination UDP port number on the server to send an
accounting-request torw INTEGER .1.3.6.1.4.1.5.1.1.44.7.1.1.7 |
accRadiusAcctServOpStateThe operational state of a server entry. UP for a server that has
responded to the last request sent to it.
DOWN for a server that did not respond to the last request sent to it. UNKNOWN for a server that we have not recently sent a request to.
DISABLED for a server entry whose admin state is DISABLEDro Enumeration .1.3.6.1.4.1.5.1.1.44.7.1.1.8 |
accRadiusAcctServReqCntsThe number of accounting-requests that have been sent to a serverro Counter .1.3.6.1.4.1.5.1.1.44.7.1.1.9 |
accRadiusAcctServAccCntsThe number of accounting responses that have been received from a
serverro Counter .1.3.6.1.4.1.5.1.1.44.7.1.1.10 |
accRadiusAcctServAccessPartThe access partition associated with this authentication
server. If an access partition name has been configured, this
authentication server will only by used to process requests
associated with the indicated access partition. This object
may also be used to configure the name of a proxy server.rwobsolete DisplayString -- .1.3.6.1.4.1.5.1.1.44.7.1.1.11 |
accRadiusAcctServIBCAttrSuppValidity of the Internet Billing support feature.rw Enumeration .1.3.6.1.4.1.5.1.1.44.7.1.1.13 |
accRadiusAcctMsgLvlThe diagnostic message level for Radius accounting.rw INTEGER .1.3.6.1.4.1.5.1.1.44.7.2 |
accRadiusAcctRecoverTOThe time a server entry will remain in the DOWN state before
transitioning to UNKNOWNrw INTEGER .1.3.6.1.4.1.5.1.1.44.7.3 |
accRadiusAcctReqDiscsThe number of accounting requests discarded due to no responses being
received from configured serversro Counter .1.3.6.1.4.1.5.1.1.44.7.4 |
accRadiusAcctRespDiscsThe number of accounting responses discarded.ro Counter .1.3.6.1.4.1.5.1.1.44.7.5 |
accRadiusAcctLastUserThe user name of the last caller we performed Radius accounting forro OCTET STRING .1.3.6.1.4.1.5.1.1.44.7.6 |
accRadiusAcctLastTypeThe type of the last Radius accounting frame received/transmittedro Enumeration .1.3.6.1.4.1.5.1.1.44.7.7 |
accRadiusDebugMaskMask for turning on debugging messagesrw INTEGER .1.3.6.1.4.1.5.1.1.44.8 |
accRadiusGroupRangeStartGroup range startrw INTEGER .1.3.6.1.4.1.5.1.1.44.9 |
accRadiusGroupRangeEndGroup range endrw INTEGER .1.3.6.1.4.1.5.1.1.44.10 |
accRadiusNASIpAddressThe IP address used to identify the NAS to a Radius serverrw IpAddress .1.3.6.1.4.1.5.1.1.44.11 |
accRadiusTraps OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.44.12 |
accRadiusServerDnTrapWhen the operation state of the server goes down
this trap is generated.
SEVERITY-DEFAULT: Major
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.1 |
accRadiusUsrNameTrapIf the user name length too high which is not
supported by the RADIUS server then this trap is
generated.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 4 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.2 |
accRadiusInOpportuneEvntTrapIndicates that the event is not found in the list of
events supported.
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.3 |
accRadiusEvntCfgAddNakTrapConfiguration of entity <param1> failed (<param2>)
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.4 |
accRadiusEvntMutexAttribTrapIndicates that both the framed attributes and tunnel
attributes are present. It means RADIUS need to
configure both framed PPP session and tunnel session
which is not possible.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.5 |
accRadiusEvntReqTrapThis trap indicates that there is a mismatch
between the PPP attributes and one in requested type.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.6 |
accRadiusEvntSPTrapThis trap indicates that there is a incompatibility
between the Framed PPP service and the service profile.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.7 |
accRadiusEvntCfgTrapProxy mode tunneling not enabled
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.8 |
accRadiusEvntAttribTrapIndicates that the kind of session is not valid.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.9 |
accRadiusRedundantReqTrapIndicates that the request is duplicate open-request;
and the session is already open.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 5 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.10 |
accRadiusBindApTrapIndicates that cant bind to access partition which has
been configured from the service profile of the user.
The service type is no longer checked and any service
profile with a configured access partition will cause
RADIUS to bind to the access partition; the trap
indicates that it may not be a physical port.
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 2
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 56 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.11 |
accRadiusAllocUsrSessionBlkTrapcannot allocate user session block due to
memory shortage.
SEVERITY-DEFAULT: Major
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 32 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.12 |
accRadiusPktUnknwnServTrapPacket from unknown server - Addr %s, Port %d
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 2
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 5 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.13 |
accRadiusUDPBindFaildTrapUDP bind failed on port %u
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 2
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.14 |
accRadiusAccPartnBindTrapCan't bind to access partition
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.15 |
accRadiusInvldLenAttrTrapInvalid length in access-accept attribute
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 253 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.16 |
accRadiusInvldLenHdrTrapInvalid length in access-accept header
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 253 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.17 |
accRadiusInvldAccChallPaktTrapInvalid access-challenge packet received
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 2
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 4 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.18 |
accRadiusNoChalMsgTrapNo challenge message in access-challenge packet
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 2
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 5 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.19 |
accRadiusInvldAuthActResTrapInvalid authenticator in account-response
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 2
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 4 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.20 |
accRadiusInvldAuthAccResTrapInvalid authenticator in access-response
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 2
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }
PCAUSE-DEFAULT: 4 TRAP-TYPE .1.3.6.1.4.1.5.1.1.44.12.0.21 |
accRadiusTrapMsgRADIUS trap message.ro INTEGER .1.3.6.1.4.1.5.1.1.44.12.1 |