ACC-MULTILINK
AI MIB Summary
Standard SNMP MIB module defining data structures for ACC-MULTILINK.
65
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
65 total| Object Name |
|---|
accMultilink OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.9 |
IMPORTS Unknown .1.3.6.1.4.1.5.1.1.9 |
mlStateChangeThis trap indicates that the indicated
Multilink Group has changed state. It has
either been created or invalidated, or
has toggled between the active and
inactive states.
This is a level 1 trap.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.9.0.1 |
mlInErrorThis trap indicates that the indicated
Multilink Group has received a inbound
packet that contained one or more errors
preventing it from being deliverable
to an upper-layer protocol. An example
of such an error would be if the
multilink port received a packet not
bearing a multilink header.
This is a level 5 trap.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 2
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum }
PCAUSE-DEFAULT: 5 TRAP-TYPE .1.3.6.1.4.1.5.1.1.9.0.2 |
mlOutErrorThis trap indicates that the indicated
Multilink Group has encountered one or
more errors preventing an outbound
packet from being deliverable to a
lower-layer protocol. An example of
such an error would be if memory were
not available in which to store the
multilink header.
This is a level 5 trap.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 2
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum }
PCAUSE-DEFAULT: 5 TRAP-TYPE .1.3.6.1.4.1.5.1.1.9.0.3 |
mlDiscardThis trap indicates that the indicated
Multilink Group has discarded an incoming
or outgoing packet.
This is a level 7 trap.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 2
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum }
PCAUSE-DEFAULT: 106 TRAP-TYPE .1.3.6.1.4.1.5.1.1.9.0.4 |
accMultilinkParameterTable SEQUENCE OF AccMultilinkParameterEntry .1.3.6.1.4.1.5.1.1.9.1 |
accMultilinkParameterEntry AccMultilinkParameterEntry .1.3.6.1.4.1.5.1.1.9.1.1 |
accMultilinkParameterIndexAn integer that uniquely identifies this multilink
group.rw INTEGER .1.3.6.1.4.1.5.1.1.9.1.1.1 |
accMultilinkParameterIfIndexAn integer that identifies the row of the
systemwide interfaces table associated with this
multilink group.rw INTEGER .1.3.6.1.4.1.5.1.1.9.1.1.2 |
accMultilinkParameterMessageLevelHow verbose the multilink port will be
when reporting state changes, errors, and
warnings. Level 1 is the least verbose,
level 7 the most. The message levels
are broken down as follows:
1 - Error messages.
2 - Unused + 1.
3 - Warning messages + 2.
4 - Unused + 3.
5 - Multilink activity + 4.
6 - Unused + 5.
7 - Multilink port state changes + 6.rw INTEGER .1.3.6.1.4.1.5.1.1.9.1.1.3 |
accMultilinkParameterAdminStateAn integer that specifies the administrative enabling or
disabling of this multilink group.rw Enumeration .1.3.6.1.4.1.5.1.1.9.1.1.5 |
accMultilinkParameterOperStateAn integer that specifies the operational state
of this multilink group.ro Enumeration .1.3.6.1.4.1.5.1.1.9.1.1.6 |
accMultilinkParameterEncapsulationIf set to ietf-ppp, a multilink group of PPP links will
follow the standard PPP multilink operations methods.
The value acc-new is reserved for future use. The value
acc is reserved for compatibility with past offerings.rw Enumeration .1.3.6.1.4.1.5.1.1.9.1.1.7 |
accMultilinkParameterContentsSet to valid when adding a row to the Multilink
parameter table. Set to invalid to delete a row.rw Enumeration .1.3.6.1.4.1.5.1.1.9.1.1.8 |
accMultilinkParameterPhysicalPortA text string listing all physical ports
associated with this multilink port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.9.1.1.9 |
accMultilinkParameterCongeToCallMultilink Congestion to Call Thresholdrw INTEGER .1.3.6.1.4.1.5.1.1.9.1.1.10 |
accMultilinkParameterCongeToClearMultilink Congestion to Call Thresholdrw INTEGER .1.3.6.1.4.1.5.1.1.9.1.1.11 |
accMultilinkParameterDampingFactorMultilink Congestion Calculation Damping Factorrw INTEGER .1.3.6.1.4.1.5.1.1.9.1.1.12 |
accMultilinkParameterFragmentSizeMultilink Fragment Sizerw INTEGER .1.3.6.1.4.1.5.1.1.9.1.1.13 |
accMultilinkParameterMppAdminStateMultilink MLX Admin State
It's default enabled for standard mlinkrwdeprecated Enumeration .1.3.6.1.4.1.5.1.1.9.1.1.14 |
accMultilinkParameterBWprotocolBandwidth management protocol
DEFAULT(0),
MLX(1),
BACP/BAP(2),rw INTEGER .1.3.6.1.4.1.5.1.1.9.1.1.15 |
accMultilinkParameterBWprotocolOpStBandwidth management protocol
down(0),
up(1),rw INTEGER .1.3.6.1.4.1.5.1.1.9.1.1.16 |
accMlTableA table of Multilink (load-sharing) groups. SEQUENCE OF AccMlEntry .1.3.6.1.4.1.5.1.1.9.2 |
accMlEntryInfo on specific multilink group AccMlEntry .1.3.6.1.4.1.5.1.1.9.2.1 |
accMlAdminStatusStatus of load sharing capability. In those systems
which support the accSlotProtocol object, the protocol
must be set to HDLC for both ports.rw Enumeration .1.3.6.1.4.1.5.1.1.9.2.1.7 |
accMultilinkStatTable SEQUENCE OF AccMultilinkStatEntry .1.3.6.1.4.1.5.1.1.9.3 |
accMultilinkStatEntry AccMultilinkStatEntry .1.3.6.1.4.1.5.1.1.9.3.1 |
accMultilinkStatIndexAn integer that uniquely identifies this
multilink group.ro INTEGER .1.3.6.1.4.1.5.1.1.9.3.1.1 |
accMultilinkStatRcvInSeqsThe number of messages received over all
physical ports associated with this multilink
group whose multilink sequence number matched
what the receiver expected.ro Counter .1.3.6.1.4.1.5.1.1.9.3.1.2 |
accMultilinkStatRcvOutSeqsThe number of messages received over all
physical ports associated with this multilink
group whose multilink sequence number did not
match what the receiver expected.ro Counter .1.3.6.1.4.1.5.1.1.9.3.1.3 |
accMultilinkStatRcvOutWindowsThe number of messages received over all
physical ports associated with this multilink
group whose multilink sequence number did not
fall within the receiver's window of acceptable
sequence numbers.ro Counter .1.3.6.1.4.1.5.1.1.9.3.1.4 |
accMultilinkStatRcvSeqBreaksThe number of times the receiver has declared
that a break in sequence numbers has occurred.ro Counter .1.3.6.1.4.1.5.1.1.9.3.1.5 |
accMultilinkStatRcvWrongEncapsThe number of messages received over all
physical ports associated with this multilink
group that did not bear the expected multilink
header.ro Counter .1.3.6.1.4.1.5.1.1.9.3.1.6 |
accMultilinkStatRcvPendingsThe number of messages received over all
physical ports associated with this multilink
group that are currently being held pending the
arrival of a message with an earlier sequence
number.ro Gauge .1.3.6.1.4.1.5.1.1.9.3.1.7 |
accMultilinkStatRcvRingCollsThe number of messages received over all
physical ports associated with this multilink
group that would have occupied the same storage
as another message being held pending the
arrival of a message with an earlier sequence
number.ro Counter .1.3.6.1.4.1.5.1.1.9.3.1.8 |
accMultilinkStatSendEncapFailsThe number of times the multilink group was
unable to encapsulate an outgoing message.ro Counter .1.3.6.1.4.1.5.1.1.9.3.1.9 |
accMultilinkStatRcvMessagesNumber of messages received over the bundle.ro Counter .1.3.6.1.4.1.5.1.1.9.3.1.10 |
accMultilinkStatRcvUnSeqsNumber of unsequenced messages received.ro Counter .1.3.6.1.4.1.5.1.1.9.3.1.11 |
accMultilinkStatRcvSeqsNumber of sequenced messages received.ro Counter .1.3.6.1.4.1.5.1.1.9.3.1.12 |
accMultilinkStatSendMessagesNumber of messages sent over the bundle.ro Counter .1.3.6.1.4.1.5.1.1.9.3.1.13 |
accMultilinkStatSendUnSeqsNumber of unsequenced messages sent.ro Counter .1.3.6.1.4.1.5.1.1.9.3.1.14 |
accMultilinkStatSendSeqsNumber of sequenced messages sent.ro Counter .1.3.6.1.4.1.5.1.1.9.3.1.15 |
accMultilinkStatRcvSeqNumSequence number of last message received.ro INTEGER .1.3.6.1.4.1.5.1.1.9.3.1.16 |
accMultilinkStatSendSeqNumSequence number of last message sent.ro INTEGER .1.3.6.1.4.1.5.1.1.9.3.1.17 |
accMultilinkStatSendCongSeqNumSequence number of last message queued because of
congestion on the send side.ro INTEGER .1.3.6.1.4.1.5.1.1.9.3.1.18 |
accMultilinkStatRcvSeqWrapsNumber of times the receive sequence number has wrapped.ro Counter .1.3.6.1.4.1.5.1.1.9.3.1.19 |
accMultilinkStatSendSeqWrapsNumber of times the send sequence number has wrapped.ro Counter .1.3.6.1.4.1.5.1.1.9.3.1.20 |
accMultilinkStatTotalLinksTotal Number of Substrates Configured for a Bundlero Gauge .1.3.6.1.4.1.5.1.1.9.3.1.21 |
accMultilinkStatActiveLinksTotal Number of Active Substrates in a Bundlero Gauge .1.3.6.1.4.1.5.1.1.9.3.1.22 |
accMultilinkStatTotalBandwidthTotal Bandwidth of the Active Substratesro Gauge .1.3.6.1.4.1.5.1.1.9.3.1.23 |
accMultilinkStatUsedBandwidthTotal Bandwidth Used for Output Trafficro Gauge .1.3.6.1.4.1.5.1.1.9.3.1.24 |
accMultilinkStatCallThresholdMultilink Congestion to Call in Bit per Secondro Gauge .1.3.6.1.4.1.5.1.1.9.3.1.25 |
accMultilinkStatClearThresholdMultilink Congestion to Clear in Bit per Secondro Gauge .1.3.6.1.4.1.5.1.1.9.3.1.26 |
accMultilinkStackTable SEQUENCE OF AccMultilinkStackEntry .1.3.6.1.4.1.5.1.1.9.4 |
accMultilinkStackEntry AccMultilinkStackEntry .1.3.6.1.4.1.5.1.1.9.4.1 |
accMultilinkStackGroupAn integer identifying the row of the ifTable
containing information about a multilink group.rw INTEGER .1.3.6.1.4.1.5.1.1.9.4.1.1 |
accMultilinkStackInterfaceAn integer identifying the row of the systemwide
interfaces table containing information about a
physical port or dial port associated with a
multilink group.rw INTEGER .1.3.6.1.4.1.5.1.1.9.4.1.2 |
accMlPppProtocolTableThis table gives the status of forwarders
over MLPPP. SEQUENCE OF AccMlPppProtocolEntry .1.3.6.1.4.1.5.1.1.9.5 |
accMlPppProtocolEntry AccMlPppProtocolEntry .1.3.6.1.4.1.5.1.1.9.5.1 |
accMlPppIndexThe multilink group indexro INTEGER .1.3.6.1.4.1.5.1.1.9.5.1.1 |
accMlPppProtocolProtocol client to the multilink groupro INTEGER .1.3.6.1.4.1.5.1.1.9.5.1.2 |
accMlPppAdminStatusThe administrative state of the MLPPP protocol clientro Enumeration .1.3.6.1.4.1.5.1.1.9.5.1.3 |
accMlPppOperStatusThe PPP operational state of the MLPPP clentro INTEGER .1.3.6.1.4.1.5.1.1.9.5.1.4 |
accMultilinkParameterMaxLinkCountMaximum Multilink Group Can Be Configuredrw INTEGER .1.3.6.1.4.1.5.1.1.9.6 |