ACC-L2TP
AI MIB Summary
Standard SNMP MIB module defining data structures for ACC-L2TP.
168
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
168 total| Object Name |
|---|
accL2tp OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.71 |
IMPORTS Unknown .1.3.6.1.4.1.5.1.1.71 |
accL2tpGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.71.1 |
accL2tpGeneralScalars OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.71.1.1 |
accL2tpVendorNameVendor Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.1.1.1 |
accL2tpFirmwareRevFirmware Revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.1.1.2 |
accL2pAdminStateL2TP Adminstrative state.rw Enumeration .1.3.6.1.4.1.5.1.1.71.1.1.3 |
accL2tpProtocolVersionL2TP Protocol Versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.1.1.4 |
accL2tpControlRWSDefault Control Window Size adopted by Dynamically created L2TP Tunnelsrw INTEGER .1.3.6.1.4.1.5.1.1.71.1.1.5 |
accL2tpPayloadSeqIf set to ON, the remote peer will wait for an acknowledgement after sending
Payload RWS messagesrw Enumeration .1.3.6.1.4.1.5.1.1.71.1.1.6 |
accL2tpPayloadRWSWhen Payload Sequencing is set to YES, the remote peer will
wait for an acknowledgement after sending this many messagesrw INTEGER .1.3.6.1.4.1.5.1.1.71.1.1.7 |
accL2tpKeepAliveDefault Hello control message intervalrw INTEGER .1.3.6.1.4.1.5.1.1.71.1.1.8 |
accL2tpMaxAckTimeoutTimeout interval for both Control and Payload acknowledgementsrw INTEGER .1.3.6.1.4.1.5.1.1.71.1.1.9 |
accL2tpMaxRetransMaximum number of Retransmissions before assuming a peer is not responding.rw INTEGER .1.3.6.1.4.1.5.1.1.71.1.1.10 |
accL2tpIdleDisconnectInterval in which to wait after the last payload session within
the tunnel disconnects before tearing down the tunnel itselfrw INTEGER .1.3.6.1.4.1.5.1.1.71.1.1.11 |
accL2tpTunnelAuthenticationDefault sevurity method for dynamically created L2TP Tunnelsrw Enumeration .1.3.6.1.4.1.5.1.1.71.1.1.12 |
accL2tpKeyDistributionMethod to obtain it's secrets for the specified security methodrw Enumeration .1.3.6.1.4.1.5.1.1.71.1.1.13 |
accL2tpProxyAuthenticationCauses the L2TP protocol to ignore the proxy authentication
information obtained by the L2TP access concentrator (LAC)
if the proxy authentication method is CHAP. When L2TP ignores
the proxy authentication, the PPP protocol is forced to
challenge the remote client again.rw Enumeration .1.3.6.1.4.1.5.1.1.71.1.1.14 |
accL2tpServerStateEnables or disables L2TP UDP Transport Server.rw Enumeration .1.3.6.1.4.1.5.1.1.71.1.1.15 |
accL2tpMessageLevelL2TP Message Levelrw INTEGER .1.3.6.1.4.1.5.1.1.71.1.1.16 |
accL2tpDebugMaskSet in conjunction with L2TP Message Level to filter out messagesrw INTEGER .1.3.6.1.4.1.5.1.1.71.1.1.17 |
accL2tpPayLoadLengthUsed to configure the L2TP default action regarding payload lengthsrw Enumeration .1.3.6.1.4.1.5.1.1.71.1.1.18 |
accL2tpAttributeHidingConfigures the way that L2TP handles attribute value pairs (AVPs).
Enabling this option causes L2TP to 'hide' AVPs typically considered
sensitive.rw Enumeration .1.3.6.1.4.1.5.1.1.71.1.1.19 |
accL2tpCallConfirmConfigures the Call Confirm operation on L2TP LAC. When enabled it
causes the LAC to verify that the LNS will proceed with a particular
call.rw Enumeration .1.3.6.1.4.1.5.1.1.71.1.1.20 |
accL2tpTunnelConfigTableDisplays all L2TP Tunnel entries configured on the system SEQUENCE OF AccL2tpTunnelConfigEntry .1.3.6.1.4.1.5.1.1.71.1.2 |
accL2tpTunnelConfigEntry AccL2tpTunnelConfigEntry .1.3.6.1.4.1.5.1.1.71.1.2.1 |
accL2tpTunnelConfigTunnelIfIndexInterface index for a tunnel portro INTEGER .1.3.6.1.4.1.5.1.1.71.1.2.1.1 |
accL2tpTunnelConfigControlRWSDefault Control Window Size adopted by Dynamically created L2TP Tunnelsrw INTEGER .1.3.6.1.4.1.5.1.1.71.1.2.1.2 |
accL2tpTunnelConfigPayloadSeqIf set to ON, the remote peer will wait for an acknowledgement after sending
Payload RWS messagesrw Enumeration .1.3.6.1.4.1.5.1.1.71.1.2.1.3 |
accL2tpTunnelConfigPayloadRWSWhen Payload Sequencing is set to YES, the remote peer
will wait for an acknowledgement after sending this many
messagesrw INTEGER .1.3.6.1.4.1.5.1.1.71.1.2.1.4 |
accL2tpTunnelConfigKeepAliveDefault Hello control message intervalrw INTEGER .1.3.6.1.4.1.5.1.1.71.1.2.1.5 |
accL2tpTunnelConfigMaxAckTimeoutTimeout interval for both Control and Payload acknowledgementsrw INTEGER .1.3.6.1.4.1.5.1.1.71.1.2.1.6 |
accL2tpTunnelConfigMaxRetransMaximum number of Retransmissions before assuming a peer is not
responding.rw INTEGER .1.3.6.1.4.1.5.1.1.71.1.2.1.7 |
accL2tpTunnelConfigIdleDisconnectInterval in which to wait after the last payload session within the
tunnel disconnects before tearing down the tunnel itselfrw INTEGER .1.3.6.1.4.1.5.1.1.71.1.2.1.8 |
accL2tpTunnelConfigTransportMechType of Transport layer protocol that L2TP should use for this tunnelrw Enumeration .1.3.6.1.4.1.5.1.1.71.1.2.1.9 |
accL2tpTunnelConfigTunnelAuthenticationConfigures the tunnel peer authentication method used for
dynamically created L2TP tunnels.rw Enumeration .1.3.6.1.4.1.5.1.1.71.1.2.1.10 |
accL2tpTunnelConfigProxyAuthenticationCauses the L2TP protocol to ignore the proxy authentication information
obtained by the access concentrator if the proxy authentication method
is CHAP.rw Enumeration .1.3.6.1.4.1.5.1.1.71.1.2.1.11 |
accL2tpTunnelConfigMessageLevelL2TP Message Levelrw INTEGER .1.3.6.1.4.1.5.1.1.71.1.2.1.12 |
accL2tpTunnelConfigDebugMaskSet in conjunction with L2TP Message Level to filter out messagesrw INTEGER .1.3.6.1.4.1.5.1.1.71.1.2.1.13 |
accL2tpTunnelConfigPayLoadLengthUsed to configure the L2TP default action regarding payload
lengths. Including the payload length in the L2TP payload
L2TP header enables some vendors to avoid recalculating the
payload length. Disabling this option informs L2TP not to
include the payload length in the L2TP packet header, reducing
the overall L2TP packet size by two bytes. Entering this
command without specifying a setting causes the L2TP tunnel
payload length to return to its default setting.rw Enumeration .1.3.6.1.4.1.5.1.1.71.1.2.1.14 |
accL2tpTunnelConfigAttributeHidingConfigures the way that L2TP handles attribute value pairs
(AVP's). Disabling this parameter causes all AVPs to be sent
without encryption; this might be necessary when tunneling
to a peer that does not support attribute hiding. If this
command is entered without specifying a setting, attribute
hiding returns to its default setting.rw Enumeration .1.3.6.1.4.1.5.1.1.71.1.2.1.15 |
accL2tpTunnelConfigCallConfirmConfigures the Call Confirm operation on L2TP LAC. When
enabled it causes the LAC to verify that the LNS will
proceed with a particular call. If the LNS is not able to
proceed with the call because of missing information in the
call setup message or resource limitations, the LNS rejects
the call. This, in turn, causes the LAC to disconnect the
remote user. If the LAC is configured to perform called number
tunneling, or the called number authorization mode is 'VPSM,'
the incoming call will not be answered until the LAC has
confirmed the call with the LNS. Enabling this option can
lessen needless call charges. The LAC confirms the call with
the LNS when the LAC sends an initial session setup message,
including called and calling number information, to the LNS.rw Enumeration .1.3.6.1.4.1.5.1.1.71.1.2.1.16 |
accL2tpTunnelConfigEventsThis object is used to generate events into the tunnel
state machine. For example a 'open' will cause the
tunnel to be forced open if it is idle. A 'close' will
cause a disconnect of a established tunnelrw Enumeration .1.3.6.1.4.1.5.1.1.71.1.2.1.17 |
accL2tpTunnelConfigCreateThe current status of this entry. It can be used to
create and delete tunnel entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.1.2.1.18 |
accL2tpTunnelConfigStatusThe current status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.1.2.1.19 |
accL2tpTunnelStatusTableDisplays status of all L2TP Tunnel entries Configured on the system SEQUENCE OF AccL2tpTunnelStatusEntry .1.3.6.1.4.1.5.1.1.71.1.3 |
accL2tpTunnelStatusEntry AccL2tpTunnelStatusEntry .1.3.6.1.4.1.5.1.1.71.1.3.1 |
accL2tpTunnelStatusTunnelIfIndexInterface index for a tunnel portro INTEGER .1.3.6.1.4.1.5.1.1.71.1.3.1.1 |
accL2tpTunnelStatusLocalTunnelIdLocal Tunnel port Idro INTEGER .1.3.6.1.4.1.5.1.1.71.1.3.1.2 |
accL2tpTunnelStatusRemTunnelIdRemote Tunnel port Idro INTEGER .1.3.6.1.4.1.5.1.1.71.1.3.1.3 |
accL2tpTunnelStatusRemFramingRemote Framingro Enumeration .1.3.6.1.4.1.5.1.1.71.1.3.1.4 |
accL2tpTunnelStatusRemBearerCapRemote Bearer Capabilitiesro Enumeration .1.3.6.1.4.1.5.1.1.71.1.3.1.5 |
accL2tpTunnelStatusRemControlRWSControl Window Size adopted by Remote end of L2TP Tunnelsro INTEGER .1.3.6.1.4.1.5.1.1.71.1.3.1.6 |
accL2tpTunnelStatusRemKeepAliveRemote Hello control message intervalro INTEGER .1.3.6.1.4.1.5.1.1.71.1.3.1.7 |
accL2tpTunnelStatusRemVendorNameRemote Vendor Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.1.3.1.8 |
accL2tpTunnelStatusRemFirmRevRemote Firmware Revisionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.1.3.1.9 |
accL2tpTunnelStatusRemHostNameRemote Host Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.1.3.1.10 |
accL2tpTunnelStatusRemProtocolVerRemote Protocol Versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.1.3.1.11 |
accL2tpTunnelStatusTunnelStateIndicates the current state of the L2TP Tunnelro Enumeration .1.3.6.1.4.1.5.1.1.71.1.3.1.12 |
accL2tpTunnelStatusKeepAliveDefault Hello control message intervalrw INTEGER .1.3.6.1.4.1.5.1.1.71.1.3.1.13 |
accL2tpTunnelStatusCalcRemRWSCalculated Remote RWSro Gauge -- .1.3.6.1.4.1.5.1.1.71.1.3.1.14 |
accL2tpTunnelStatusCalcRemRetransTimeoutCalculated Remote Retransmit Timeoutro Gauge -- .1.3.6.1.4.1.5.1.1.71.1.3.1.15 |
accL2tpTunnelStatusQueueLengthQueue Lengthro Gauge -- .1.3.6.1.4.1.5.1.1.71.1.3.1.16 |
accL2tpTunnelStatusTxOctetsOctets Transmittedro Counter .1.3.6.1.4.1.5.1.1.71.1.3.1.17 |
accL2tpTunnelStatusTxPacketsPackets Transmittedro Counter .1.3.6.1.4.1.5.1.1.71.1.3.1.18 |
accL2tpTunnelStatusRxOctetsOctets Receivedro Counter .1.3.6.1.4.1.5.1.1.71.1.3.1.19 |
accL2tpTunnelStatusRxPacketsPackets Receivedro Counter .1.3.6.1.4.1.5.1.1.71.1.3.1.20 |
accL2tpTunnelStatusTotalSessionsTotal Sessionsro Counter .1.3.6.1.4.1.5.1.1.71.1.3.1.21 |
accL2tpTunnelStatusActiveSessionsActive Sessionsro Gauge .1.3.6.1.4.1.5.1.1.71.1.3.1.22 |
accL2tpTunnelStatusAttemptFailsFailed Attemptsro Counter .1.3.6.1.4.1.5.1.1.71.1.3.1.23 |
accL2tpTunnelStatusRetransTimeoutsRetransmit timeoutsro Counter .1.3.6.1.4.1.5.1.1.71.1.3.1.24 |
accL2tpTunnelStatusBackwardTransitionsNumber of Backward transmissionsro Counter .1.3.6.1.4.1.5.1.1.71.1.3.1.25 |
accL2tpTunnelStatusLastTransitionsTime since Last Transitionro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.5.1.1.71.1.3.1.26 |
accL2tpTunnelStatusLastCauseCause for Last Transitionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.1.3.1.27 |
accL2tpTunnelStatusNextSendSeqShows the next sequence number to be sent in the
next control packet.ro INTEGER .1.3.6.1.4.1.5.1.1.71.1.3.1.28 |
accL2tpTunnelStatusNextSendSeqAckShows the sequence number acknowledged by the terminal
peer.ro INTEGER .1.3.6.1.4.1.5.1.1.71.1.3.1.29 |
accL2tpTunnelStatusRecvSeqShows the last sequence number received in a control
packet.ro INTEGER .1.3.6.1.4.1.5.1.1.71.1.3.1.30 |
accL2tpTunnelStatusRecvSeqAckShows the last sequence number this L2TP entity has
acknowledged to the remote peer as received.ro INTEGER .1.3.6.1.4.1.5.1.1.71.1.3.1.31 |
accL2tpTunnelStatusOutOfSeqsIndicates the number of control packets that were
received out of sequence.ro Counter .1.3.6.1.4.1.5.1.1.71.1.3.1.32 |
accL2tpTunnelStatusOutOfSeqQLenIndicates the number of control packets that were
received out of sequence. These control packets wait
for a specified time in the out of sequence queue
for the packet with the missing sequence number.ro Gauge .1.3.6.1.4.1.5.1.1.71.1.3.1.33 |
accL2tpTunnelStatusOutOfWindowsThe number of control packets that were received
outside of the offered sequence window size.ro Counter .1.3.6.1.4.1.5.1.1.71.1.3.1.34 |
accL2tpTunnelStatusInDiscardsThe number of packets that are discarded coming in.ro Counter .1.3.6.1.4.1.5.1.1.71.1.3.1.35 |
accL2tpTunnelStatusOutDiscardsThe number of packets that are discarded going out.ro Counter .1.3.6.1.4.1.5.1.1.71.1.3.1.36 |
accL2tpSessionTableDisplays all L2TP Tunnel entries configured on the system SEQUENCE OF AccL2tpSessionEntry .1.3.6.1.4.1.5.1.1.71.1.5 |
accL2tpSessionEntry AccL2tpSessionEntry .1.3.6.1.4.1.5.1.1.71.1.5.1 |
accL2tpSessionTunnelIfIndexInterface index for tunnel portro INTEGER .1.3.6.1.4.1.5.1.1.71.1.5.1.1 |
accL2tpSessionCallTypeCall Directionro Enumeration .1.3.6.1.4.1.5.1.1.71.1.5.1.2 |
accL2tpSessionLocalCallIdSession Identifier used by Local Tunnel Endpoint for this sessionro INTEGER .1.3.6.1.4.1.5.1.1.71.1.5.1.3 |
accL2tpSessionRemoteCallIdSession Identifier used by Remote Tunnel Endpoint for this sessionro INTEGER .1.3.6.1.4.1.5.1.1.71.1.5.1.4 |
accL2tpSessionCallSerialIdSerial ID for this sessionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.1.5.1.5 |
accL2tpSessionRemoteHostNameRemote Host Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.1.5.1.6 |
accL2tpSessionPhysChanIdPort Identifier of the Physical Port being tunneled at the other
end of this tunnelro INTEGER .1.3.6.1.4.1.5.1.1.71.1.5.1.7 |
accL2tpSessionBearerCapType of call that has been physically terminated at the LACro Enumeration .1.3.6.1.4.1.5.1.1.71.1.5.1.8 |
accL2tpSessionFramingCapType of call that has been physically terminated at the LACro Enumeration .1.3.6.1.4.1.5.1.1.71.1.5.1.9 |
accL2tpSessionConnectSpeedLAC's Negotiated Modem Speedro INTEGER .1.3.6.1.4.1.5.1.1.71.1.5.1.10 |
accL2tpSessionDNISPhone number dialed by the Remote Userro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.1.5.1.11 |
accL2tpSessionCLIDPhone number that the Remote User is dialing fromro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.1.5.1.12 |
accL2tpSessionSubAddressAdditional Addressing Informationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.1.5.1.13 |
accL2tpSessionRemoteRWSPayload Receive Window Size that the remote endpoint has requested
for this sessionro INTEGER .1.3.6.1.4.1.5.1.1.71.1.5.1.14 |
accL2tpSessionRemotePPDPacket Processing Delay that the remote endpoint expects to incur
for processing a window full of packets received (in 0.1 second units)ro INTEGER .1.3.6.1.4.1.5.1.1.71.1.5.1.15 |
accL2tpSessionProxyPppA value of YES indicates that the LAC initiated a PPP session with
the remote client before tunneling was performedro Enumeration .1.3.6.1.4.1.5.1.1.71.1.5.1.16 |
accL2tpSessionAuthMethodIf Proxy PPP was performed, then this field may indicate the type
of authentication that was initiatedro Enumeration .1.3.6.1.4.1.5.1.1.71.1.5.1.17 |
accL2tpSessionStateCurrent state of the sessionro Enumeration .1.3.6.1.4.1.5.1.1.71.1.5.1.18 |
accL2tpSessionLocalPortLocal interface that this tunnel has connected toro INTEGER .1.3.6.1.4.1.5.1.1.71.1.5.1.19 |
accL2tpSessionStatusTableDisplays all L2TP Tunnel entries configured on the system SEQUENCE OF AccL2tpSessionStatusEntry .1.3.6.1.4.1.5.1.1.71.1.6 |
accL2tpSessionStatusEntry AccL2tpSessionStatusEntry .1.3.6.1.4.1.5.1.1.71.1.6.1 |
accL2tpSessionStatusTunnelIfIndexInterface index for tunnel portro INTEGER .1.3.6.1.4.1.5.1.1.71.1.6.1.1 |
accL2tpSessionStatusLocalCallIdSession Identifier used by Local Tunnel Endpoint for this sessionro INTEGER .1.3.6.1.4.1.5.1.1.71.1.6.1.2 |
accL2tpSessionStatusInDiscardsNumber of Payload packets discarded because transmit queue was fullro Counter .1.3.6.1.4.1.5.1.1.71.1.6.1.3 |
accL2tpSessionStatusTxSequenceResetsShows the number of packets that were sent with the
Reset bit (R-bit) set.ro Counter .1.3.6.1.4.1.5.1.1.71.1.6.1.4 |
accL2tpSessionStatusCalcRWSCalculated Remote RWSro Gauge .1.3.6.1.4.1.5.1.1.71.1.6.1.5 |
accL2tpSessionStatusTxQueueLengthQueue Lengthro Gauge .1.3.6.1.4.1.5.1.1.71.1.6.1.6 |
accL2tpSessionStatusNextSendSeqShows the number of sequenced packets sent from this RAC
at the time the display command was performed. This value
increments sequentially from 0 to 65535. After the maximum
value of 65535 is reached, the sequence restarts at 0.ro INTEGER .1.3.6.1.4.1.5.1.1.71.1.6.1.7 |
accL2tpSessionStatusNextSendSeqAckShows the number of sequenced packets sent from this RAC
that have been acknowledged by the remote peer since the
tunnel was established. This value increments sequentially
from 0 to 65535. After the maximum value of 65535 is
reached, the sequence restarts at 0.ro INTEGER .1.3.6.1.4.1.5.1.1.71.1.6.1.8 |
accL2tpSessionStatusNextRecvSeqShows the number of sequenced packets that this RAC
has received and acknowledged back to its tunnel peer
since the tunnel was established. This value increments
sequentially from 0 to 65535. After the maximum value of
65535 is reached, the sequence restarts at 0.ro INTEGER .1.3.6.1.4.1.5.1.1.71.1.6.1.9 |
accL2tpSessionStatusNextRecvSeqAckShows the number of sequenced packets received by this RAC
that have been acknowledged to the remote peer since the
tunnel was established. This value increments sequentially
from 0 to 65535. After the maximum value of 65535 is
reached, the sequence restarts at 0.ro INTEGER .1.3.6.1.4.1.5.1.1.71.1.6.1.10 |
accL2tpSessionStatusOutOfSeqsShows the number of payload packets waiting in the
out-of-sequence queue. Packets in this queue are waiting
for the delivery of packets that may be delayed in the
network.ro Counter .1.3.6.1.4.1.5.1.1.71.1.6.1.11 |
accL2tpSessionStatusOutOfSeqQLenShows the number of payload packets waiting in the
out-of-sequence queue. Packets in this queue are waiting
for the delivery of packets that may be delayed in the
network.ro Gauge .1.3.6.1.4.1.5.1.1.71.1.6.1.12 |
accL2tpSessionStatusTxOctetsThe number of octets that are being transmitted.ro Counter .1.3.6.1.4.1.5.1.1.71.1.6.1.13 |
accL2tpSessionStatusTxPacketsThe number of packets that are being transmitted.ro Counter .1.3.6.1.4.1.5.1.1.71.1.6.1.14 |
accL2tpSessionStatusRxOctetsThe number of octets that are being received.ro Counter .1.3.6.1.4.1.5.1.1.71.1.6.1.15 |
accL2tpSessionStatusRxPacketsThe number of packets that are being received.ro Counter .1.3.6.1.4.1.5.1.1.71.1.6.1.16 |
accL2tpSessionStatusOutDiscardsShows the number of received packets that have
been discarded during this session.ro Counter .1.3.6.1.4.1.5.1.1.71.1.6.1.17 |
accL2tpSessionStatusOutOfWindowsThe number of payload packets that were received
outside of the offered sequence window size.ro Counter .1.3.6.1.4.1.5.1.1.71.1.6.1.18 |
accL2tpSessionStatusRxSequenceResetsThe number of payload packets that were received
that had the R-bit set.ro INTEGER .1.3.6.1.4.1.5.1.1.71.1.6.1.19 |
accL2tpEndpointDomainTableDisplays all L2TP Tunnel entries configured on the system SEQUENCE OF AccL2tpEndpointDomainEntry .1.3.6.1.4.1.5.1.1.71.1.7 |
accL2tpEndpointDomainEntry AccL2tpEndpointDomainEntry .1.3.6.1.4.1.5.1.1.71.1.7.1 |
accL2tpEndpointDomainA domain typically consist of L2TP tunnel peers. Each of which can
serve as an endpoint for a tunnel originating at the local router.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.1.7.1.1 |
accL2tpEndpointDomainSecretShared password used by tunnel peers to authenticate each other.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.1.7.1.2 |
accL2tpEndpointDomainNumberGroupThis object identifies the Called Number Group that
is to be associated with this Endpoint Domain.rw INTEGER .1.3.6.1.4.1.5.1.1.71.1.7.1.3 |
accL2tpEndpointDomainStatusThe current status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.1.7.1.4 |
accL2tpTransport OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.71.2 |
accL2tpTransportUdp OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.71.2.1 |
accL2tpTransportUdpScalars OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.71.2.1.1 |
accL2tpUdpServerPortDefault UDP Port number L2TP will connect to when passively waiting for
incoming connectionsrw INTEGER .1.3.6.1.4.1.5.1.1.71.2.1.1.1 |
accL2tpUdpPayloadCksumsWhen set to YES, L2TP will inform UDP to checksum L2TP Payload messages.
L2TP Control messages are always checksummedrw Enumeration .1.3.6.1.4.1.5.1.1.71.2.1.1.2 |
accL2tpUdpFixedAddressConfigures the default behavior of the transport driver to support
multihomed or roaming endpoints.rw Enumeration .1.3.6.1.4.1.5.1.1.71.2.1.1.3 |
accL2tpUdpSrcIpAddressconfigures the L2TP UDP transport driver to assign the
given address to all L2TP packets trans mitted. Configuring
a fixed interface by assigning an IP address to all L2TP
packets is done to improve L2TP performance; however, limiting
this value to a single interface may cause the address to
become unreachable if the network goes down.rw IpAddress .1.3.6.1.4.1.5.1.1.71.2.1.1.4 |
accL2tpUdpStatsRsrcFailsShows the number of times that a request for memory has
failed.rw Counter .1.3.6.1.4.1.5.1.1.71.2.1.1.5 |
accL2tpUdpStatsInDiscardsShows the number of received L2TP packets that were discarded.rw Counter .1.3.6.1.4.1.5.1.1.71.2.1.1.6 |
accL2tpUdpStatsUnknownTIDsShows the number of packets received from unknown tunnels.rw Counter .1.3.6.1.4.1.5.1.1.71.2.1.1.7 |
accL2tpUdpTransportTableDisplays all L2TP Tunnel entries configured on the system SEQUENCE OF AccL2tpUdpTransportEntry .1.3.6.1.4.1.5.1.1.71.2.1.2 |
accL2tpUdpTransportEntry AccL2tpUdpTransportEntry .1.3.6.1.4.1.5.1.1.71.2.1.2.1 |
accL2tpUdpTransportTunnelIfIndexInterface index for tunnel portro INTEGER .1.3.6.1.4.1.5.1.1.71.2.1.2.1.1 |
accL2tpUdpTransportEndpointIpAddressTunnel Remote Endpoint Ip Addressro IpAddress .1.3.6.1.4.1.5.1.1.71.2.1.2.1.2 |
accL2tpUdpTransportPortValue of UDP Port that will be used when establishing a
connectionrw INTEGER .1.3.6.1.4.1.5.1.1.71.2.1.2.1.3 |
accL2tpUdpTransportPayloadCksumWhen this is set to YES, UDP will calculate the Payload checksumrw Enumeration .1.3.6.1.4.1.5.1.1.71.2.1.2.1.4 |
accL2tpUdpTransportFixedAddressConfigures the L2tp UDP transport layer to support
multihomed or roaming remote clients.Supporting multihomed
remote clients enables the tunnel peer to change its IP
address; this typically occurs if the remote client is
multihomed or has a co-located LAC and roams out of a zone.rw Enumeration .1.3.6.1.4.1.5.1.1.71.2.1.2.1.5 |
accL2tpUdpTransportStatusThe current status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.2.1.2.1.6 |
accL2tpUdpConnectionTableDisplays all L2TP Tunnel entries configured on the system SEQUENCE OF AccL2tpUdpConnectionEntry .1.3.6.1.4.1.5.1.1.71.2.1.3 |
accL2tpUdpConnectionEntry AccL2tpUdpConnectionEntry .1.3.6.1.4.1.5.1.1.71.2.1.3.1 |
accL2tpUdpConnectionTunnelIfIndexInterface index for tunnel portro INTEGER .1.3.6.1.4.1.5.1.1.71.2.1.3.1.1 |
accL2tpUdpConnectionEndpointIpAddressTunnel Remote Endpoint Ip Addressro IpAddress .1.3.6.1.4.1.5.1.1.71.2.1.3.1.2 |
accL2tpUdpConnectionRxPortReceive Portro INTEGER .1.3.6.1.4.1.5.1.1.71.2.1.3.1.3 |
accL2tpUdpConnectionTxPortTransmit Portro INTEGER .1.3.6.1.4.1.5.1.1.71.2.1.3.1.4 |
accL2tpUdpConnectionAddressChangesNumber of times User changed his Ip Addressro Counter .1.3.6.1.4.1.5.1.1.71.2.1.3.1.5 |
accL2tpTraps OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.71.2.1.4 |
accL2tpTunnelDelTrapWhen L2TP resources associated with a tunnel port are
released and removing any references, if any sessions
are left., delete action fails. This trap message
carries this information.
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.71.2.1.4.0.1 |
accL2tpTrap2While searching the UDP endpoint database to see if
the EP exists., transport entry can exist without l2tp
tunnel ports and so tries to create one and generates
this trap if this creation fails.
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.71.2.1.4.0.2 |
accL2tpUdpEpTrapIn the ad hoc L2tp testing, all the tunnels are created
and brought up. In the process if the L25 UDP end point
is not found, then this trap is generated.
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.71.2.1.4.0.3 |
accL2tpUdpEpCreateTrapIn the ad hoc L2tp testing, all the tunnels are
created and brought up. In the process if the
creation of end point fails then this trap is generated
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.71.2.1.4.0.4 |
accL2tpTunnelCreateTrapIn the ad hoc L2tp testing, all the tunnels are
created and brought up. In the process if the
creation of a tunnel fails then this trap is
generated
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.71.2.1.4.0.5 |
accL2tpInvIntfAddrTrapThis trap message indicates that the IP address
specified in the 'set L2TP UDP source IP address' is
invalid. An address associated with one of the IP
network entries must be specified. In the process of
Updating the L2tp MIB structure if the invalid interface
is referenced with the UDP, this trap is generated
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.71.2.1.4.0.6 |
accL2tpTunnelAbortCleanUpTrapWhile doing the tunnel clean up if the tunnel state
is not Idle then this trap indicating the abort on
tunnel clean up is generated
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.71.2.1.4.0.7 |
accL2tpTrap8SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.71.2.1.4.0.8 |
accL2tpUdpServTrapDuring Demultiplexing, If the appropriate tunnel
is not found, attempt is made to establish a new
tunnel. In such a situation, if the promiscous
server is not enabled then this trap is generated
indicating the same
SEVERITY-DEFAULT: Major
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.71.2.1.4.0.9 |
accL2tpTrap10During Demultiplexing, If the appropriate tunnel is
not found, attempt is made to establish a new tunnel.
In such a situation, if the udpt creation fails,
then this trap is generated indicating the same.
and increments the failure count
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accL2tpTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.71.2.1.4.0.10 |
accL2tpTrapMsgEnterprise Trap Message for L2tpro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.71.2.1.4.1 |