ACC-ISDN
AI MIB Summary
Standard SNMP MIB module defining data structures for ACC-ISDN.
169
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
169 total| Object Name |
|---|
accIsdn OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.36 |
IMPORTS Unknown .1.3.6.1.4.1.5.1.1.36 |
accIsdnDsl OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.36.1 |
accIsdnDslIndexAn index instantiating a particular digital subscriber
loop interface on this bridge/router terminal.rodeprecated INTEGER .1.3.6.1.4.1.5.1.1.36.1.1 |
accIsdnSubTableISDN subscriber table containing configuration and
operational parameters for all ISDN subscriber
interfaces on this bridge/router terminal.deprecated SEQUENCE OF AccIsdnSubEntry .1.3.6.1.4.1.5.1.1.36.2 |
accIsdnSubEntryConfiguration and operational parameters for a
particular ISDN subscriber interface.deprecated AccIsdnSubEntry .1.3.6.1.4.1.5.1.1.36.2.1 |
accIsdnSubSwitchTypeThe particular type of central-office switch
providing access to the ISDN network and to
which this subscriber interface is connected.rwdeprecated Enumeration .1.3.6.1.4.1.5.1.1.36.2.1.1 |
accIsdnSubChannelModeThe ISDN channel configuration mode.rwdeprecated Enumeration .1.3.6.1.4.1.5.1.1.36.2.1.2 |
accIsdnSubAdminStatusThe administrative status of this subscriber
interface.rwdeprecated Enumeration .1.3.6.1.4.1.5.1.1.36.2.1.3 |
accIsdnSubDiagLevelThe current diagnostic message level for this
subscriber interface.rwdeprecated INTEGER .1.3.6.1.4.1.5.1.1.36.2.1.4 |
accIsdnSubManualTeiThe TEI (terminal endpoint identifier) when manual
TEI assignment is required. Setting this value
between 0 and 63 (inclusive) specifies manual TEI
assignment using the indicated value. Setting
this value to 127 (the broadcast TEI) specifies
automatic TEI assignment.rwdeprecated INTEGER .1.3.6.1.4.1.5.1.1.36.2.1.5 |
accIsdnStatTableStatistics and operational status maintained for all
ISDN subscriber interfaces on this bridge/router
terminal.deprecated SEQUENCE OF AccIsdnStatEntry .1.3.6.1.4.1.5.1.1.36.3 |
accIsdnStatEntryStatistics and operational status for a particular
ISDN subscriber interface.deprecated AccIsdnStatEntry .1.3.6.1.4.1.5.1.1.36.3.1 |
accIsdnStatHdlcInPacketsThe number of packets received on the D-channel
of this subscriber interface.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.1 |
accIsdnStatHdlcInOctetsThe number of octets received on the D-channel
of this subscriber interface.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.2 |
accIsdnStatHdlcInErrorsThe number of input hardware errors counted by
the D-channel input/output driver.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.3 |
accIsdnStatHdlcInDiscsThe number of input packets discarded by the
D-channel input/output driver.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.4 |
accIsdnStatHdlcOutPacketsThe number of packets transmitted on the D-channel
of this subscriber interface.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.5 |
accIsdnStatHdlcOutOctetsThe number of octets transmitted on the D-channel
of this subscriber interface.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.6 |
accIsdnStatHdlcOutErrorsThe number of output hardware errors counted by
the D-channel input/output driver.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.7 |
accIsdnStatHdlcOutDiscsThe number of output packets discarded by the
D-channel input/output driver.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.8 |
accIsdnStatLapdUnsolicRespsThe number of unsolicited LAPD response frames
received on all data links associated with the
D-channel of this subscriber interface.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.9 |
accIsdnStatLapdPeerSabmesThe number of peer SABME frames received on all
data links associated with the D-channel of this
subscriber interface.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.10 |
accIsdnStatLapdN200ErrorsThe number of unsuccessful T200 timer recoveries
after a frame has been retransmitted N200 times.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.11 |
accIsdnStatLapdNrSeqErrorsThe number of N(R) sequence errors.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.12 |
accIsdnStatLapdRecvdFrmrsThe number of LAPD FRMR response frames received.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.13 |
accIsdnStatLapdCntlErrorsThe number of LAPD frames received with an invalid
or non-implemented control field.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.14 |
accIsdnStatLapdInfoErrorsThe number of LAPD frames received with a
non-permitted information (I) field.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.15 |
accIsdnStatLapdWrongSizesThe number of LAPD frames received which were the
wrong size.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.16 |
accIsdnStatLapdN201ErrorsThe number of LAPD frames received which contained
and information field which exceeded N201.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.17 |
accIsdnStatCallsOriginatedsThe number of outgoing calls originated on this
subscriber interface.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.18 |
accIsdnStatCallsOfferredsThe number of incoming calls offerred on this
subscriber interface.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.19 |
accIsdnStatCallsAnsweredsThe number of outgoing calls originated on this
subscriber interface which were answered by the
destination.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.20 |
accIsdnStatCallsAcceptedsThe number of incoming calls offerred on this
subscriber interface which were accepted for
connection.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.21 |
accIsdnStatCallsCompletedsThe number of outgoing and incoming calls
completed (that is, the number of calls which
were successfully connected).rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.22 |
accIsdnStatCallsClearedsThe number of outgoing and incoming calls
cleared.rodeprecated Counter .1.3.6.1.4.1.5.1.1.36.3.1.23 |
accIsdnStatDslOperStatusThe operation status of this interface.rodeprecated Enumeration .1.3.6.1.4.1.5.1.1.36.3.1.24 |
accIsdnStatLastCausesThe last cause value sent or received on this
subscriber interface.rodeprecated INTEGER .1.3.6.1.4.1.5.1.1.36.3.1.25 |
accIsdnCallTableParameters and operational status for ISDN calls
active on this bridge/router terminal.deprecated SEQUENCE OF AccIsdnCallEntry .1.3.6.1.4.1.5.1.1.36.4 |
accIsdnCallEntryParameters and operational status for a particular
ISDN call which is presently active or is in the
process of being established or cleared.deprecated AccIsdnCallEntry .1.3.6.1.4.1.5.1.1.36.4.1 |
accIsdnCallIdentifierThe internal call control identifier for this call.rodeprecated INTEGER .1.3.6.1.4.1.5.1.1.36.4.1.1 |
accIsdnCallReferenceThe Q.931 call reference value for this call.rodeprecated INTEGER .1.3.6.1.4.1.5.1.1.36.4.1.2 |
accIsdnCallChannelIdThe bearer channel interface ID allocated for this
call.rodeprecated Enumeration .1.3.6.1.4.1.5.1.1.36.4.1.3 |
accIsdnCallIfIndexThe interface index of the physical port connected
by the bearer channel.rodeprecated Enumeration .1.3.6.1.4.1.5.1.1.36.4.1.4 |
accIsdnCallInfoRateThe information transfer rate.rodeprecated Enumeration .1.3.6.1.4.1.5.1.1.36.4.1.5 |
accIsdnCallStateThe current call control state (not Q.931).rodeprecated Enumeration .1.3.6.1.4.1.5.1.1.36.4.1.6 |
accIsdnCallCauseThe last cause value associated with this call.rodeprecated INTEGER .1.3.6.1.4.1.5.1.1.36.4.1.7 |
accIsdnCallOriginThe originator of the call.rodeprecated Enumeration .1.3.6.1.4.1.5.1.1.36.4.1.8 |
accIsdnCallAddressThe remote call address associated with this call.
For incoming calls, this is the calling ISDN address.
For outgoing calls, this is the called ISDN address.rodeprecated OCTET STRING .1.3.6.1.4.1.5.1.1.36.4.1.9 |
accIsdnCallDslIndexThe interface index for the digital subscriber loop.rodeprecated INTEGER .1.3.6.1.4.1.5.1.1.36.4.1.10 |
accIsdnTest OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.36.5 |
accIsdnTestIfIndexThe interface index for the physical port from
which a call will be made.rw Enumeration .1.3.6.1.4.1.5.1.1.36.5.1 |
accIsdnTestAddressThe ISDN destination call address.rw OCTET STRING .1.3.6.1.4.1.5.1.1.36.5.2 |
accIsdnTestCommandThe action to be performed.rw Enumeration .1.3.6.1.4.1.5.1.1.36.5.3 |
accIsdnTestRoutingThe action to be performed for incoming calls.ro Enumeration .1.3.6.1.4.1.5.1.1.36.5.4 |
accIsdnTestRegNameThe name of the MC145474 register to write.rw Enumeration .1.3.6.1.4.1.5.1.1.36.5.5 |
accIsdnTestRegValueThe value to write to the MC145474 register.rw INTEGER .1.3.6.1.4.1.5.1.1.36.5.6 |
accwIsdnTestBChanModeThe action to be performed on the B-channel.rw Enumeration .1.3.6.1.4.1.5.1.1.36.5.7 |
accwIsdnTestOptionsTest options in hex.rw INTEGER .1.3.6.1.4.1.5.1.1.36.5.8 |
accIsdnxSubTableISDN subscriber table containing configuration and
operational parameters for all ISDN subscriber
interfaces on this bridge/router terminal. SEQUENCE OF AccIsdnxSubEntry .1.3.6.1.4.1.5.1.1.36.6 |
accIsdnxSubEntryAn entry in the ISDN Subscriber Table AccIsdnxSubEntry .1.3.6.1.4.1.5.1.1.36.6.1 |
accIsdnxSubDslIndexThe ifIndex of an ISDN BRI, DBRI, PRI/T1 or PRI/E1
interface on this managed device.ro INTEGER -- (1..'7fffffff'h) .1.3.6.1.4.1.5.1.1.36.6.1.1 |
accIsdnxSubSwitchTypeThe particular type of central-office switch
providing access to the ISDN network and to which
this subscriber interface is connected.rw Enumeration .1.3.6.1.4.1.5.1.1.36.6.1.2 |
accIsdnxSubChanConfigThe ISDN channel configuration mode. Beginning with
release 8.0, this is the number of bearer channels
managed by the D channel. This object is normally
read-only. It can be written only when changing the
channel configuration from 2B+D to 1B+D on a Nile
configured with a BRI in J1.rw INTEGER .1.3.6.1.4.1.5.1.1.36.6.1.3 |
accIsdnxSubAdminStatusThe administrative status of this subscriber interface.rw Enumeration .1.3.6.1.4.1.5.1.1.36.6.1.4 |
accIsdnxSubDiagLevelThe current diagnostic message level for this
subscriber interface.rw INTEGER .1.3.6.1.4.1.5.1.1.36.6.1.5 |
accIsdnxSubManualTeiThe TEI (terminal endpoint identifier) when manual
TEI assignment is required. Setting this value
between 0 and 63 (inclusive) specifies manual TEI
assignment using the indicated value. Setting this
value to 127 (the broadcast TEI) specifies automatic
TEI assignment. This object is writable only for BRI
subscribers. For PRI subscribers, the value read is
always 0rw INTEGER .1.3.6.1.4.1.5.1.1.36.6.1.6 |
accIsdnxSubOperStatusThe operational status of this subscriber interface.rw Enumeration .1.3.6.1.4.1.5.1.1.36.6.1.7 |
accIsdnxSubNumNfasIndicates the number of NFAS trunks managed by this D
channel.ro INTEGER .1.3.6.1.4.1.5.1.1.36.6.1.8 |
accIsdnxSubLastCauseThe last clearing cause for a call associated with
this interface.ro INTEGER .1.3.6.1.4.1.5.1.1.36.6.1.9 |
accIsdnxSubSubaddrTypeIndicates the subaddress type for the ISDN interface.rw Enumeration .1.3.6.1.4.1.5.1.1.36.6.1.10 |
accIsdnxSubVoiceOptionIndicates whether the user is able to receive circuit mode voice callsrw Enumeration .1.3.6.1.4.1.5.1.1.36.6.1.11 |
accIsdnxSubCliOptionIndicates whether a callers identifaction will be checked with
known entries before accepting the call.rw Enumeration .1.3.6.1.4.1.5.1.1.36.6.1.12 |
accIsdnxSubEncodingMethodCompanding algorithm to be used when initiating
or answering voice calls over this interface. This
is configured during initialization based on the
user configured switch type.ro Enumeration .1.3.6.1.4.1.5.1.1.36.6.1.13 |
accIsdnxSubDialingMethodDialing method to be used when initiating
voice calls over the ISDN line. This
is configured during initialization based on the
user configured switch type.ro Enumeration .1.3.6.1.4.1.5.1.1.36.6.1.14 |
accIsdnxSubAutoSpidSR-3888 Automatic SPID detection enabled or
disabled for a BRI subscriber interface.rw Enumeration .1.3.6.1.4.1.5.1.1.36.6.1.19 |
accIsdnxSubAutoSwitchThe central-office switch type detected by the Automatic
Switch detection function.ro Enumeration .1.3.6.1.4.1.5.1.1.36.6.1.20 |
accIsdnxStatTableStatistics and operational status maintained for all
ISDN subscriber interfaces on this bridge/router
terminal. SEQUENCE OF AccIsdnxStatEntry .1.3.6.1.4.1.5.1.1.36.7 |
accIsdnxStatEntryAn entry in the ISDN Statistics Table. AccIsdnxStatEntry .1.3.6.1.4.1.5.1.1.36.7.1 |
accIsdnxStatDslIndexThe ifIndex of an ISDN BRI, DBRI, PRI/T1 or PRI/E1
interface on this managed device.ro INTEGER -- (1..'7fffffff'h) .1.3.6.1.4.1.5.1.1.36.7.1.1 |
accIsdnxStatHdlcInPacketsThe number of packets received on the D-channel of
this ISDN interface.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.2 |
accIsdnxStatHdlcInOctetsThe number of octets received on the D-channel of
this ISDN interface.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.3 |
accIsdnxStatHdlcInErrorsThe number of input hardware errors counted by the
D-channel HDLC driver.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.4 |
accIsdnxStatHdlcInDiscardsThe number of input packets discarded by the
D-channel HDLC driver.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.5 |
accIsdnxStatHdlcOutPacketsThe number of packets transmitted on the D-channel of
this ISDN interface.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.6 |
accIsdnxStatHdlcOutOctetsThe number of octets transmitted on the D-channel of
this ISDN interface.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.7 |
accIsdnxStatHdlcOutErrorsThe number of output hardware errors counted by the
D-channel HDLC driver.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.8 |
accIsdnxStatHdlcOutDiscardsThe number of output packets discarded by the
D-channel HDLC driver.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.9 |
accIsdnxStatLapdUnsolicRespsThe number of unsolicited LAPD response frames
received on all data links associated with the
D-channel of this ISDN interface.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.10 |
accIsdnxStatLapdPeerSabmesThe number of peer SABME frames received on all data
links associated with the D-channel of this ISDN
interface.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.11 |
accIsdnxStatLapdN200ErrorsThe number of unsuccessful T200 timer recoveries
after a frame has been retransmitted N200 times.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.12 |
accIsdnxStatLapdNrSeqErrorsThe number of N(R) sequence errors.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.13 |
accIsdnxStatLapdRecvdFrmrsThe number of LAPD FRMR response frames received.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.14 |
accIsdnxStatLapdCntlErrorsThe number of LAPD frames received with an invalid or
non-implemented control field.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.15 |
accIsdnxStatLapdInfoErrorsThe number of LAPD frames received with a
non-permitted information (I) field.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.16 |
accIsdnxStatLapdWrongSizesThe number of LAPD frames received which were the
wrong size.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.17 |
accIsdnxStatLapdN201ErrorsThe number of LAPD frames received which contained
and information field which exceeded N201.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.18 |
accIsdnxStatCallOriginatedsThe number of outgoing calls originated on this ISDN
interface.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.19 |
accIsdnxStatCallOfferredsThe number of incoming calls offered on this ISDN
interface.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.20 |
accIsdnxStatCallRoutedsThe number of outgoing calls originated on this ISDN
interface which were routed by the network.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.21 |
accIsdnxStatCallAcceptedsThe number of incoming calls offered on this ISDN
interface which were accepted for connection.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.22 |
accIsdnxStatCallCompletedsThe number of outgoing and incoming calls completed
(that is, the number of calls which were successfully
connected).ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.23 |
accIsdnxStatCallClearedsThe number of outgoing and incoming calls cleared.ro Counter .1.3.6.1.4.1.5.1.1.36.7.1.24 |
accIsdnxCallTableParameters and operational status for ISDN calls in
progress on this bridge/router terminal. SEQUENCE OF AccIsdnxCallEntry .1.3.6.1.4.1.5.1.1.36.8 |
accIsdnxCallEntryAn entry in the ISDN Call Table. AccIsdnxCallEntry .1.3.6.1.4.1.5.1.1.36.8.1 |
accIsdnxCallDslIndexThe ifIndex of an ISDN BRI, DBRI, PRI/T1 or PRI/E1
interface on this managed device.ro INTEGER -- (1..'7fffffff'h) .1.3.6.1.4.1.5.1.1.36.8.1.1 |
accIsdnxCallReferenceThe Q.931 call reference value for this call.ro INTEGER .1.3.6.1.4.1.5.1.1.36.8.1.2 |
accIsdnxCallOriginThe originator of the call.ro Enumeration .1.3.6.1.4.1.5.1.1.36.8.1.3 |
accIsdnxCallCircuitIndexThe ifIndex for the circuit associated with this call.ro INTEGER -- (1..'7fffffff'h) .1.3.6.1.4.1.5.1.1.36.8.1.4 |
accIsdnxCallInfoRateThe information transfer rate.ro Enumeration .1.3.6.1.4.1.5.1.1.36.8.1.5 |
accIsdnxCallStateThe Q.931 call control state.ro Enumeration .1.3.6.1.4.1.5.1.1.36.8.1.6 |
accIsdnxCallCauseThe last cause value associated with this call.ro INTEGER .1.3.6.1.4.1.5.1.1.36.8.1.7 |
accIsdnxCallAddressThe remote call address associated with this call.
For incoming calls, this is the calling ISDN
address. For outgoing calls, this is the called ISDN
address.ro OCTET STRING .1.3.6.1.4.1.5.1.1.36.8.1.8 |
accIsdnxCallInfoTypeThe information transfer type:
info-type-cmd circuit mode data, clear channel
64 kbits/s
info-type-cm56 circuit mode data, rate-adapted
to 56 kbits/s
info-type-cmv circuit mode data over voice circuitro Enumeration .1.3.6.1.4.1.5.1.1.36.8.1.9 |
accIsdnxCallSlotMapA 31-bit mask which identifies the time-slots forming
a hyperchannel.ro INTEGER .1.3.6.1.4.1.5.1.1.36.8.1.10 |
accIsdnSpidTableValid SPIDs currently Registered with the
CO, required for placing/accepting calls. SEQUENCE OF AccIsdnSpidEntry .1.3.6.1.4.1.5.1.1.36.9 |
accIsdnSpidEntrySPID information entry in the SPID Table. AccIsdnSpidEntry .1.3.6.1.4.1.5.1.1.36.9.1 |
accIsdnSpidIndexAn Index to Ports of B-channels.ro INTEGER .1.3.6.1.4.1.5.1.1.36.9.1.1 |
accIsdnSpidValueValue of SPID,Required for the terminal to be
active on the S/T bus.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.36.9.1.2 |
accIsdnTerm OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.36.10 |
accIsdnxTerminationISDN Bus Termination statusrw Enumeration .1.3.6.1.4.1.5.1.1.36.10.1 |
accIsdnxCurrCallsNumber of active ISDN callsro INTEGER .1.3.6.1.4.1.5.1.1.36.11 |
accIsdnTraps OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.36.12 |
accIsdnOutGoingCallTrapWhile initializing the call control block.
When the call was first originated to establish
the correct connection endpoint specifier to use,
there is a check on failing which this trap is
generated
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.1 |
accIsdnCallResetTrapWhen a catestrophic event occurs, if there is
no recovery because of less cblks, then the call
is simply forced to clear, which is cause for this
call reset trap
SEVERITY-DEFAULT: Major
EVENTTYPE-DEFAULT: 2
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 6 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.2 |
accIsdnConnectTrapIndication thruough this trap is a failure of
Connect if the ICCB channel is present. Else deicdes
there is no bearer channel and sends this trap.
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 2
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.3 |
accIsdnStaleDialCntxtTrapThis trap is triggered when there is a mismatch in
the Magicnumber. Treating it as a stale dial.
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.4 |
accIsdnIncomingCallTrapThis is generated during identifying the calling
party, if the call has to be refused based on the
validity of the calling number. The reason is also
stated in the trap.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 102 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.5 |
accIsdnCallTrapThis is generated during identifying the called party,
if the call has to be refused based on the validity
of the called number. The reason is also stated in
the trap.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 102 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.6 |
accIsdnApplTmrExpTrapIf the application timer expires during the call
setup, then the call is aborted. This trap is sent
to convey the same.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 102 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.7 |
accIsdnApplTmrExpInClearTrapIf the application timer expires during the call
clearing, then the call is aborted. This trap is
sent to convey the same.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 102 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.8 |
accIsdnChannelRestrtTrapWhile determining valid the channel stat, if the
action is to restart the channel, then the
appropriate B-Channel is restarted. This trap indicates
such a situation.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 2
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 6 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.9 |
accIsdnDataLnkRelTrapIf the D-channel Data Link is is to be released
making Datalink down, then this trap is triggered.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 2
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 108 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.10 |
accIsdnDataLnkEstTrapIf the D-Channel Data Link is established making
Datalink UP, then this trap is triggered.
SEVERITY-DEFAULT: Clear
EVENTTYPE-DEFAULT: 2
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 108 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.11 |
accIsdnConfigStackTrapIf the ISDN stack cannot be configured because of
reasons like unspecified switch type, or not
supporting DCBU etc., then this trap is generated
which is conveying that a configuration error has
occured.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.12 |
accIsdnSubscriberLoopTrapWhen a catestorphic error like low cblk conditions
occur, then it tries to recover by restting the
subscriber's loop. That is when this trap is generated.
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.13 |
accIsdnRegisterTrapIf the registration name is not identified and found
in the list, then it sends this trap.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.14 |
accIsdnTrmnlRegErrTrapIf there is a error in getting the SPID indicates
that the it is a unknown CES or may be a inoppurtune
event has occured and hence the terminal registration
error is sent.
SEVERITY-DEFAULT: Major
EVENTTYPE-DEFAULT: 2
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 6 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.15 |
accIsdnTrmnlRegTrapIn the event SPID state being pending indicates that
the the terminal registration failed. This trap
indicates the same.
SEVERITY-DEFAULT: Major
EVENTTYPE-DEFAULT: 2
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 6 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.16 |
accIsdnAwaitDatalnkEstTrapIf the SME_TERM_REGISTER request is apparently stuck,
most likely because a datalink cannot be established,
then this trap is generated.
SEVERITY-DEFAULT: Major
EVENTTYPE-DEFAULT: 2
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 6 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.17 |
accIsdnDisconnectTrapIf the CCB state is proceeding and the ISDN CHANNEL
ID is none then this trap can be triggered after
which the call is abort.
SEVERITY-DEFAULT: Major
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 6 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.18 |
accIsdnOutGoingCallFailTrapIn the process of disconnect request from the RM
Manager if there isn't any active call, then this
trap is generated.
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.19 |
accIsdnTrap20If the RM Dial manger sends the request to set up
and if it fails for various reason, then this trap
is generated.
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.20 |
accIsdnModuleErrTrapIf the application timer expires during the call
setup, then the call is aborted. This trap is sent
to convey the same.
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.21 |
accIsdnTrap22If the application timer expires during the call
clrearing, then the call is aborted. This trap is
sent to convey the same.
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.22 |
accIsdnNfasIntfTrapIf there is a application-dependent error then this
trap displays the module function and the error
message.
SEVERITY-DEFAULT: Minor
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 46 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.23 |
accIsdnNoSpidTrapWhile initialsing the layer1 task, if the interface
is configured for NT mode, then this trap is generated.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.24 |
accIsdnSpidConflictTrapIf the trial to get the internal interface id
fails it means the NFAS interface is not properly
defined.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.25 |
accIsdnInvSpidTrapWhile getting the SPID tries to find the port. In
the process if the port is not found and a corresponding
PP index is not found then this trap is generated.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.26 |
accIsdnSwBldTrapWhile getting the SPID, it comapres the interface flag
and if there is a match, it triggers a config error,
and hence the trap saying conflicting SPIDs.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.27 |
accIsdnParametersTrapIf the SPID is too lengthy which is not supported
then this trap is generated.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.28 |
accIsdnSwitchTypeTrapDetermines whether or not operating as the network
side (NT) or user side (TE) and records this in the
DSL entry. And generates a trap if the hardware
configuration is not consistent with the software
system build (Telenetworks requires USER vs. NETWORK
to be bound at compile-time).
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.29 |
accIsdnManyIntfTrapWhile initialzing the ISDN parameters, it validates
from the NVM. While doing so if a error is encountered
this config error trap is sent.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.30 |
accIsdnPriGroupRangeTrapTries to make sure the switch type configured for
the subscriber entry has been included in the system
build. If not, generates this trap and proceeds as
if the entry had been disabled. Also, makes sure the
switch type is consistent with the installed interface.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.31 |
accIsdnNfasIntfPriTrapThe maximum number of DSL entries is limited at
compile time by the Telenetworks code. When it
exceeds this this trap is generated.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.32 |
accIsdnManyNFASIntfTrapIf during initialization a invalid group is encountered
as it is out of the range, then this trap is generated.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.33 |
accIsdnPriGroupTrapLooks for interfaces in PRI group 0. If the interface
has a signaling channel, it is assumed to be a
stand-alone interface. Otherwise, it is a
orphan (i.e., misconfigured) NFAS interface, hence
generates the trap.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.34 |
accIsdnTrap35In the event of making sure the PRI group has a
primary signaling interface and that the group can
accommodate an additional NFAS interface, if the
new pri id or secondary new id exceed the maximum
interface id, this trap is generated.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.35 |
accIsdnNoSrvcProIFTrapNo service profile identifier
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.36 |
accIsdnNTBldIncmptblHWTrapSoftware NT build is incompatible with harware TE mode
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.37 |
accIsdnRcvdSpidTrapReceived one spid
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.38 |
accIsdnRcvdSpidsNWTrapReceived spids from network
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.39 |
accIsdnAutoSpidFldTrapAuto spid failed (found %d suitable SPID(s))
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.40 |
accIsdnAutoSpidSccdTrapAuto spid succeeded
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.41 |
accIsdnAutoSpidFld1TrapAuto spid failed (cause = %d)
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.42 |
accIsdnAutoSwtchSccdTrapAuto switch detection succeeded
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.43 |
accIsdnAutoSwtchFldTrapAuto switch detection failed (unspecified switch type)
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.44 |
accIsdnAutoSwtchFld1TrapAuto switch detection failed
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.36.12.0.45 |
accIsdnTrapMsgISDN Trap Messagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.36.12.1 |