ACC-DS3
AI MIB Summary
Standard SNMP MIB module defining data structures for ACC-DS3.
24
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
24 total| Object Name |
|---|
IMPORTSThe DS3 interface table. SEQUENCE OF AccDs3InfcEntry .1.3.6.1.4.1.5.1.1.79 |
accDs3InfcEntryAn entry in the DS3 interface table. AccDs3InfcEntry .accDs3InfcTable.1 |
accDs3InfcServiceStateIndicates DS3 interface service state.
Certain attributes require that the service
state be in a certain state before they can
be altered.rw Enumeration .accDs3InfcTable.1.1 |
accDs3InfcLoopbackOpThe local loopback mode of a DS3 interface.
The entire DS3 line can be set or each individual
DS1 line within the DS3 can be set separately.rw Enumeration .accDs3InfcTable.1.2 |
accDs3InfcLoopbackCOThe loopback state of a DS3 interface when
loopback is initiated remotely. A DS3 line
can be set, or individual DS1 lines within
the DS3 can be set separately.ro Enumeration .accDs3InfcTable.1.3 |
accDs3InfcLineLengthThe approximate line length. The default is
short.rw Enumeration .accDs3InfcTable.1.4 |
accDs3InfcMdlProtocolThe terminal to terminal path maintenance
data link protocol of the DS3 interface.rw Enumeration .accDs3InfcTable.1.5 |
accDs3InfcTxMdlEicThe local MDL equipment identification
code for the DS3 interface. Describes the
equipment.rw DisplayString (SNMPv2-TC) .accDs3InfcTable.1.6 |
accDs3InfcTxMdlLicThe local MDL location identification
code for the DS3 interface. Describes
specific location of the equipment.rw DisplayString (SNMPv2-TC) .accDs3InfcTable.1.7 |
accDs3InfcTxMdlFicThe local MDL frame identification
code for the DS3 interface. Identifies
where the specific piece of equipment
is located in a buildingrw DisplayString (SNMPv2-TC) .accDs3InfcTable.1.8 |
accDs3InfcTxMdlUnitThe local MDL unit identification
for the DS3 interface. It identifies where
the specific piece of equipment is located
within a bay.rw DisplayString (SNMPv2-TC) .accDs3InfcTable.1.9 |
accDs3InfcTxMdlFacThe local MDL facility identification
code for the DS3 interface. Describes
a specific DS3 path.rw DisplayString (SNMPv2-TC) .accDs3InfcTable.1.10 |
accDs3InfcTxMdlPortThe local MDL port identification
code for the DS3 interface. Describes
port on the equipment that will initiate
the idle signal.rw DisplayString (SNMPv2-TC) .accDs3InfcTable.1.11 |
accDs3InfcTxMdlGenThe local MDL generator number
for the DS3 interface. Describes
the signal generator that will
initiate the test signal.rw DisplayString (SNMPv2-TC) .accDs3InfcTable.1.12 |
accDs3InfcRxMdlEicThe remote MDL equipment identification
code for the DS3 interface. Describes the
equipment.ro DisplayString (SNMPv2-TC) .accDs3InfcTable.1.13 |
accDs3InfcRxMdlLicThe remote MDL location identification
code for the DS3 interface. Describes
specific location of the equipment.ro DisplayString (SNMPv2-TC) .accDs3InfcTable.1.14 |
accDs3InfcRxMdlFicThe remote MDL frame identification
code for the DS3 interface. Identifies
where the specific piece of equipment
is located in a buildingro DisplayString (SNMPv2-TC) .accDs3InfcTable.1.15 |
accDs3InfcRxMdlUnitThe remote MDL unit identification
for the DS3 interface. It identifies where
the specific piece of equipment is located
within a bay.ro DisplayString (SNMPv2-TC) .accDs3InfcTable.1.16 |
accDs3InfcRxMdlFacThe remote MDL unit identification
for the DS3 interface. It identifies where
the specific piece of equipment is located
within a bay.ro DisplayString (SNMPv2-TC) .accDs3InfcTable.1.17 |
accDs3InfcRxMdlPortThe remote MDL port identification
code for the DS3 interface. Describes
port on the equipment that will initiate
the idle signal.ro DisplayString (SNMPv2-TC) .accDs3InfcTable.1.18 |
accDs3InfcRxMdlGenThe remote MDL generator number
for the DS3 interface. Describes
the signal generator that will
initiate the test signal.ro DisplayString (SNMPv2-TC) .accDs3InfcTable.1.19 |
accDs3InfcRxMdlPathAgesro Counter .accDs3InfcTable.1.20 |
accDs3InfcRxMdlIdleAgesro Counter .accDs3InfcTable.1.21 |
accDs3InfcRxMdlTestAgesro Counter .accDs3InfcTable.1.22 |