ACC-DN
AI MIB Summary
Standard SNMP MIB module defining data structures for ACC-DN.
79
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
79 total| Object Name |
|---|
accDn OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.19 |
IMPORTS Unknown .1.3.6.1.4.1.5.1.1.19 |
accDnNumberNumber of DECNET circuitsro INTEGER .1.3.6.1.4.1.5.1.1.19.1 |
accDnIDNode ID; Least 10 bits identify the node,
six bits above that identify the area.rw INTEGER .1.3.6.1.4.1.5.1.1.19.2 |
accDnMaxNodeMaximum node number permitted in the local arearw INTEGER .1.3.6.1.4.1.5.1.1.19.3 |
accDnMaxAreaMaximum area number permittedrw INTEGER .1.3.6.1.4.1.5.1.1.19.4 |
accDnMaxAdjRtrMaximum number of adjacent routersrw INTEGER .1.3.6.1.4.1.5.1.1.19.5 |
accDnMaxEndNodeMaximum number of broadcast endnode adjacenciesrw INTEGER .1.3.6.1.4.1.5.1.1.19.6 |
accDnMaxLocHopMaximum number of hops allowed within this arearw INTEGER .1.3.6.1.4.1.5.1.1.19.7 |
accDnMaxLocCostMaximum cost allowed on a path within this arearw INTEGER .1.3.6.1.4.1.5.1.1.19.8 |
accDnMaxVisitMaximum number of node visits allowed for a packetrw INTEGER .1.3.6.1.4.1.5.1.1.19.9 |
accDnMaxForHopMaximum number of hops allowed to another arearw INTEGER .1.3.6.1.4.1.5.1.1.19.10 |
accDnMaxForCostMaximum cost allowed on a path to another arearw INTEGER .1.3.6.1.4.1.5.1.1.19.11 |
accDnBCT1Interval between retranmissions of routing
database updates on Broadcast Addressrw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.5.1.1.19.12 |
accDnT1Interval between retranmissions of routing
database updates non-broadcastrw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.5.1.1.19.13 |
accDnMsgLevMessage level for generation of trap messages
describing DECNET operational phenonomena
See Trap level for descriptionrw INTEGER .1.3.6.1.4.1.5.1.1.19.14 |
accDnNodeStateOperational state of the noderw Enumeration .1.3.6.1.4.1.5.1.1.19.15 |
accDnUnreachsPackets dropped due to node unreachablero Counter .1.3.6.1.4.1.5.1.1.19.16 |
accDnVisitXcdsPackets dropped due to visits exceededro Counter .1.3.6.1.4.1.5.1.1.19.17 |
accDnBadNodesPackets dropped due to illegal node numberro Counter .1.3.6.1.4.1.5.1.1.19.18 |
accDnPktOsizesPackets dropped due to oversize packetro Counter .1.3.6.1.4.1.5.1.1.19.19 |
accDnFmtErrsPackets dropped due to packet format errorro Counter .1.3.6.1.4.1.5.1.1.19.20 |
accDnCktTableDECnet circuit table
Entries are added/deleted via management action. SEQUENCE OF AccDnCktEntry .1.3.6.1.4.1.5.1.1.19.21 |
accDnCktEntryThe instance of an entry is the circuit number.
Existing entries can be modified. AccDnCktEntry .1.3.6.1.4.1.5.1.1.19.21.1 |
accDnCktIndexCircuit numberrw INTEGER .1.3.6.1.4.1.5.1.1.19.21.1.1 |
accDnCktStatusAdministrative DECNET state of this circuitrw Enumeration .1.3.6.1.4.1.5.1.1.19.21.1.2 |
accDnCktStateOperational DECNET state of this circuitro Enumeration .1.3.6.1.4.1.5.1.1.19.21.1.3 |
accDnCktCostAdministrative circuit cost
Object will be set to a circuit-type
dependent value if not present
in entry-adding SET PDU.rw INTEGER .1.3.6.1.4.1.5.1.1.19.21.1.4 |
accDnMaxRtrMaximum number of routers that can be
communicated with over this circuitrw INTEGER .1.3.6.1.4.1.5.1.1.19.21.1.5 |
accDnHelloIntInterval between transmission of Router Hello
messages to other DECNET routers on this circuitrw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.5.1.1.19.21.1.6 |
accDnRtrPriorityPriority of this Decnet router to become
designated router on this circuit.rw INTEGER .1.3.6.1.4.1.5.1.1.19.21.1.7 |
accDnDesRtrIdID of router which is designated router on
this circuit. Lower 10 bits is node number,
six bits above that are area number.ro OCTET STRING -- .1.3.6.1.4.1.5.1.1.19.21.1.8 |
accDnDesRtrPrioPriority of router which is designated router on
this circuit.ro INTEGER .1.3.6.1.4.1.5.1.1.19.21.1.9 |
accDnTrnPktRecsNumber of transit packets received on
this circuit.ro Counter .1.3.6.1.4.1.5.1.1.19.21.1.10 |
accDnTrnPktSndsNumber of transit packets sent on
this circuit.ro Counter .1.3.6.1.4.1.5.1.1.19.21.1.11 |
accDnEndNodePktRecsNumber of end-node packets received on
this circuit.ro Counter .1.3.6.1.4.1.5.1.1.19.21.1.12 |
accDnEndNodePktSndsNumber of end-node packets sent on
this circuit.ro Counter .1.3.6.1.4.1.5.1.1.19.21.1.13 |
accDnCktDownsNumber of circuit down events noted on
this circuit.ro Counter .1.3.6.1.4.1.5.1.1.19.21.1.14 |
accDnCktTypeCircuit type
Object required in entry-adding SET PDU.rw Enumeration .1.3.6.1.4.1.5.1.1.19.21.1.15 |
accDnCktPortPhysical port that this circuit is on
Object required in entry-adding SET PDU.rw Enumeration .1.3.6.1.4.1.5.1.1.19.21.1.16 |
accDnX25InOutAddrX25 address for other end of circuit; we'll
send to this address and will accept packets from
this address for this circuit.
Object required in entry-adding SET PDU if
circuit type is X.25rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.19.21.1.17 |
accDnX25InAddrPackets from this address are accepted
on this circuit.
Object will be set to default value if not present
in entry-adding SET PDU.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.19.21.1.18 |
accDnX25IdleMaximum idle time before this circuit is
considered unused.
Object will be set to default value if not present
in entry-adding SET PDU.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.5.1.1.19.21.1.19 |
accDnX25PktValMaximum X25 packet size
Object will be set to default value if not present
in entry-adding SET PDU.rw INTEGER .1.3.6.1.4.1.5.1.1.19.21.1.20 |
accDnX25PktWinX25 packet window
Object will be set to default value if not present
in entry-adding SET PDU.rw INTEGER .1.3.6.1.4.1.5.1.1.19.21.1.21 |
accDnEntryStatusSetting this object to invalid deletes entryrw Enumeration .1.3.6.1.4.1.5.1.1.19.21.1.22 |
accDnX25FacIndexIndex of optional facility string or 0.rw INTEGER .1.3.6.1.4.1.5.1.1.19.21.1.23 |
accDnRtTableDECnet routing table SEQUENCE OF AccDnRtEntry .1.3.6.1.4.1.5.1.1.19.22 |
accDnRtEntryDetail on specific route AccDnRtEntry .1.3.6.1.4.1.5.1.1.19.22.1 |
accDnRtNodeDestination nodero INTEGER .1.3.6.1.4.1.5.1.1.19.22.1.1 |
accDnRtHopsNumber of hops to destinationro INTEGER .1.3.6.1.4.1.5.1.1.19.22.1.2 |
accDnRtCostCost to destinationro INTEGER .1.3.6.1.4.1.5.1.1.19.22.1.3 |
accDnRtCktCircuit number to use to get to destinationro INTEGER .1.3.6.1.4.1.5.1.1.19.22.1.4 |
accDnRtNextHopNext router along the way to destinationro INTEGER .1.3.6.1.4.1.5.1.1.19.22.1.5 |
accDnAreaTableDECnet area table. SEQUENCE OF AccDnAreaEntry .1.3.6.1.4.1.5.1.1.19.23 |
accDnAreaEntryDetails on specific area AccDnAreaEntry .1.3.6.1.4.1.5.1.1.19.23.1 |
accDnAreaAreaRemote arearo INTEGER .1.3.6.1.4.1.5.1.1.19.23.1.1 |
accDnAreaHopsHops to Remote arearo INTEGER .1.3.6.1.4.1.5.1.1.19.23.1.2 |
accDnAreaCostCost to Remote arearo INTEGER .1.3.6.1.4.1.5.1.1.19.23.1.3 |
accDnAreaCktCircuit over which remote area can be reached.ro INTEGER .1.3.6.1.4.1.5.1.1.19.23.1.4 |
accDnAreaNextHopNext hop to remote area.ro INTEGER .1.3.6.1.4.1.5.1.1.19.23.1.5 |
accDnRouteFilterTableThe DECNET IV Routes that the Network Manager wants to
be careful about. SEQUENCE OF AccDnRouteFilterEntry .1.3.6.1.4.1.5.1.1.19.24 |
accDnRouteFilterEntryA single controlled DECNET Route. AccDnRouteFilterEntry .1.3.6.1.4.1.5.1.1.19.24.1 |
accDnRouteFilterAdjIf 0, all adjacent systems.
If a DECNET Area with host id 0, all adjacent
systems in that area.
If a DECNET Host ID, that adjacent system.rw INTEGER .1.3.6.1.4.1.5.1.1.19.24.1.1 |
accDnRouteFilterNodeIf 0, all routing information.
If a DECNET Area with Host ID 0, relevant level
2 routing information.
If a DECNET Host ID, level 1 routing informa-
tion for that host.rw INTEGER .1.3.6.1.4.1.5.1.1.19.24.1.2 |
accDnRouteFilterDispositionThis variable indicates what to do with the
indicated routing information. Where overlaps
occur ('accept no routing information from area
3.0 except from router 3.27'), the most specif-
ic match applies.rw Enumeration .1.3.6.1.4.1.5.1.1.19.24.1.3 |
accDnRouteFilterEntStatsetting this variable to 'invalid' has the ef-
fect of invalidating it as of the next system
reset.rw Enumeration .1.3.6.1.4.1.5.1.1.19.24.1.4 |
accDnForwardFilterTableThe DECNET traffic that the Network Manager wants
selectively treated. SEQUENCE OF AccDnForwardFilterEntry .1.3.6.1.4.1.5.1.1.19.25 |
accDnForwardFilterEntryA single set of messages that the Network Manager
wants selectively treated. AccDnForwardFilterEntry .1.3.6.1.4.1.5.1.1.19.25.1 |
accDnForwardFilterDestIf 0, all DECNET Addresses.
If an Area with Host Part 0, all traffic to
that Area.
If a DECNET Host ID, all traffic to that Host.rw INTEGER .1.3.6.1.4.1.5.1.1.19.25.1.1 |
accDnForwardFilterSourceIf 0, all DECNET Traffic.
If an Area with Host Part 0, all traffic from
that Area.
If a DECNET Host ID, all traffic from that
Host.rw INTEGER .1.3.6.1.4.1.5.1.1.19.25.1.2 |
accDnForwardFilterDispositionThis variable indicates what is to be done
with traffic from accDnForwardFilterSource to
accDnForwardFilterDest. When overlaps occur
('discard all traffic from Area 4.0 to Anywhere
except traffic from Host 4.123'), the most
specific match applies.rw Enumeration .1.3.6.1.4.1.5.1.1.19.25.1.3 |
accDnForwardFilterEntStatsetting accDnForwardFilterEntStat to invalid
has the effect of removing the filter on the
next system reset.rw Enumeration .1.3.6.1.4.1.5.1.1.19.25.1.4 |
accDnAdjTableThe set of systems adjacent to this router. SEQUENCE OF AccDnAdjEntry .1.3.6.1.4.1.5.1.1.19.26 |
accDnAdjEntryOne of the systems adjacent to this router. AccDnAdjEntry .1.3.6.1.4.1.5.1.1.19.26.1 |
accDnAdjNodeThe Host Identifier of the adjacent node.ro INTEGER .1.3.6.1.4.1.5.1.1.19.26.1.1 |
accDnAdjTypeThe type of DECNET adjacency being sustained.ro Enumeration .1.3.6.1.4.1.5.1.1.19.26.1.2 |
accDnAdjCircuitThe DECNET Circuit Number.ro INTEGER .1.3.6.1.4.1.5.1.1.19.26.1.3 |
accDnAdjStateThe state of the adjacency.ro Enumeration .1.3.6.1.4.1.5.1.1.19.26.1.4 |