ACC-COMPRESS
AI MIB Summary
Standard SNMP MIB module defining data structures for ACC-COMPRESS.
113
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
113 total| Object Name |
|---|
accCompress OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.6 |
IMPORTS Unknown .1.3.6.1.4.1.5.1.1.6 |
accCompressDialNeighborTableData compression neighbor exception table
for dial ports containing data compression
parameters for selected neighbors. SEQUENCE OF AccCompressDialNeighborEntry .1.3.6.1.4.1.5.1.1.6.1 |
accCompressDialNeighborEntryData compression neighbor exception table
entry containing data compression parameters
for a particular dial port neighbor. AccCompressDialNeighborEntry .1.3.6.1.4.1.5.1.1.6.1.1 |
accCompressDialNeighborIfIndexThe ifindex of the dial port via which the
neighbor is accessed or connected.ro INTEGER .1.3.6.1.4.1.5.1.1.6.1.1.1 |
accCompressDialNeighborCallAddressThe call address of the neighbor to which
the dial port is accessed or connected.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.6.1.1.2 |
accCompressDialNeighborStatusThe administrative status of data
compression for this dial neighbor. ON
enables data compression and OFF disables it.
Setting the status to INVALID permanently
removes the entry from the table.rw Enumeration .1.3.6.1.4.1.5.1.1.6.1.1.3 |
accCompressFfrNeighborTableData compression neighbor exception table
for frame relay circuits containing data
compression parameters for selected
neighbors. SEQUENCE OF AccCompressFfrNeighborEntry .1.3.6.1.4.1.5.1.1.6.2 |
accCompressFfrNeighborEntryData compression neighbor exception table
entry containing data compression parameters
for a particular frame relay neighbor. AccCompressFfrNeighborEntry .1.3.6.1.4.1.5.1.1.6.2.1 |
accCompressFfrNeighborIfIndexThe physical port index via which the
neighbor is accessed or connected.ro INTEGER .1.3.6.1.4.1.5.1.1.6.2.1.1 |
accCompressFfrNeighborDlciA unique identifier for the neighbor. In
this case it is the local DLCI.ro INTEGER .1.3.6.1.4.1.5.1.1.6.2.1.2 |
accCompressFfrNeighborStatusThe administrative status of data
compression for this neighbor. ON enables
data compression and OFF disables it.
Setting the status to INVALID permanently
removes the entry from the table.rw Enumeration .1.3.6.1.4.1.5.1.1.6.2.1.3 |
accCompressX25NeighborTableData compression neighbor exception table
for X25 circuits containing data compression
parameters for selected neighbors. SEQUENCE OF AccCompressX25NeighborEntry .1.3.6.1.4.1.5.1.1.6.3 |
accCompressX25NeighborEntryData compression neighbor exception table
entry containing data compression parameters
for a particular X.25 neighbor. AccCompressX25NeighborEntry .1.3.6.1.4.1.5.1.1.6.3.1 |
accCompressX25NeighborIfIndexThe physical port index via which the
neighbor is accessed or connected.ro INTEGER .1.3.6.1.4.1.5.1.1.6.3.1.1 |
accCompressX25NeighborAddressA unique identifier for the neighbor. This
is the neighbor's DTE addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.6.3.1.2 |
accCompressX25NeighborStatusThe administrative status of data
compression for this neighbor. ON enables
data compression and OFF disables it.
Setting the status to INVALID permanently
removes the entry from the table.rw Enumeration .1.3.6.1.4.1.5.1.1.6.3.1.3 |
accCompressDialStatTableData compression statistics table for dial
ports containing data compression statistics
for all active dial port neighbors. SEQUENCE OF AccCompressDialStatEntry .1.3.6.1.4.1.5.1.1.6.4 |
accCompressDialStatEntryData compression dial port statistics table
entry containing data compression statistics
for a particular dial port neighbor. AccCompressDialStatEntry .1.3.6.1.4.1.5.1.1.6.4.1 |
accCompressDialStatIfIndexThe interface index of the dial port via
which the neighbor is accessed or connected.ro INTEGER .1.3.6.1.4.1.5.1.1.6.4.1.1 |
accCompressDialStatCallAddressThe call address of the neighbor to which
the dial port is currently connected.ro OCTET STRING .1.3.6.1.4.1.5.1.1.6.4.1.2 |
accCompressDialStatStatusThe operational status of the neighbor.ro Enumeration .1.3.6.1.4.1.5.1.1.6.4.1.3 |
accCompressDialStatOctetsInsThe total number of compressed octets
presented for decompression.ro Counter .1.3.6.1.4.1.5.1.1.6.4.1.4 |
accCompressDialStatOctetsOutsThe total number of compressed octets
generated after compression.ro Counter .1.3.6.1.4.1.5.1.1.6.4.1.5 |
accCompressDialStatPacketsInsThe total number of uncompressed packets
generated by decompression.ro Counter .1.3.6.1.4.1.5.1.1.6.4.1.6 |
accCompressDialStatPacketsOutsThe total number of uncompressed packets
presented for compression.ro Counter .1.3.6.1.4.1.5.1.1.6.4.1.7 |
accCompressDialStatUnCompInsThe total number of uncompressed packets
presented for decompression (i.e., packets
which could not be compressed and were
therefore received in their uncompressed
form).ro Counter .1.3.6.1.4.1.5.1.1.6.4.1.8 |
accCompressDialStatUnCompOutsThe total number of uncompressed packets
presented for compression which could not be
compressed (i.e., the packet expanded).
These packets are transmitted in their
uncompressed form.ro Counter .1.3.6.1.4.1.5.1.1.6.4.1.9 |
accCompressDialStatAvgCompInThe average compression rate of packets
presented for decompression expressed as a
percentage between 0 and 100. 100% is the
unattainable rate which could only be
achieved by compressing all packets to zero
bits.ro Gauge .1.3.6.1.4.1.5.1.1.6.4.1.10 |
accCompressDialStatAvgCompOutThe average compression rate of packets
presented for compression expressed as a
percentage between 0 and 100. 100% is the
unattainable rate which could only be
achieved by compressing all packets to zero
bits.ro Gauge .1.3.6.1.4.1.5.1.1.6.4.1.11 |
accCompressDialStatHdrErrorsThe number of packets received with invalid
compression headers. A header error requires
a resynchronization of the history buffers at
each end of the link.ro Counter .1.3.6.1.4.1.5.1.1.6.4.1.12 |
accCompressDialStatResyncsThe number of resynchronizations.ro Counter .1.3.6.1.4.1.5.1.1.6.4.1.13 |
accCompressDialStatNoEndMarksThe number of packets received with no end
marker. Missing end markers require a
resynchronization of the history buffers at
each end of the link.ro Counter .1.3.6.1.4.1.5.1.1.6.4.1.14 |
accCompressDialStatNoBufAvailsThe number of times the neighbor was
connected and no history buffer could be
allocated.ro Counter .1.3.6.1.4.1.5.1.1.6.4.1.15 |
accCompressFfrStatTableData compression statistics table containing
data compression statistics for all active
frame relay neighbors. SEQUENCE OF AccCompressFfrStatEntry .1.3.6.1.4.1.5.1.1.6.5 |
accCompressFfrStatEntryData compression statistics table entry
containing data compression statistics for a
particular frame relay neighbor. AccCompressFfrStatEntry .1.3.6.1.4.1.5.1.1.6.5.1 |
accCompressFfrStatIfIndexThe physical port index of the port via
which the neighbor is accessed or connected.ro INTEGER .1.3.6.1.4.1.5.1.1.6.5.1.1 |
accCompressFfrStatDlciThis is the local DLCI for the frame relay
neighbor.ro INTEGER .1.3.6.1.4.1.5.1.1.6.5.1.2 |
accCompressFfrStatStatusThe operational status of the neighbor.ro Enumeration .1.3.6.1.4.1.5.1.1.6.5.1.3 |
accCompressFfrStatOctetsInsThe total number of compressed octets
presented for decompression.ro Counter .1.3.6.1.4.1.5.1.1.6.5.1.4 |
accCompressFfrStatOctetsOutsThe total number of compressed octets
generated after compression.ro Counter .1.3.6.1.4.1.5.1.1.6.5.1.5 |
accCompressFfrStatPacketsInsThe total number of uncompressed packets
generated by decompression.ro Counter .1.3.6.1.4.1.5.1.1.6.5.1.6 |
accCompressFfrStatPacketsOutsThe total number of uncompressed packets
presented for compression.ro Counter .1.3.6.1.4.1.5.1.1.6.5.1.7 |
accCompressFfrStatUnCompInsThe total number of uncompressed packets
presented for decompression (i.e., packets
which could not be compressed and were
therefore received in their uncompressed
form).ro Counter .1.3.6.1.4.1.5.1.1.6.5.1.8 |
accCompressFfrStatUnCompOutsThe total number of uncompressed packets
presented for compression which could not be
compressed (i.e., the packet expanded).
These packets are transmitted in their
uncompressed form.ro Counter .1.3.6.1.4.1.5.1.1.6.5.1.9 |
accCompressFfrStatAvgCompInThe average compression rate of packets
presented for decompression expressed as a
percentage between 0 and 100. 100% is the
unattainable rate which could only be
achieved by compressing all packets to zero
bits.ro Gauge .1.3.6.1.4.1.5.1.1.6.5.1.10 |
accCompressFfrStatAvgCompOutThe average compression rate of packets
presented for compression expressed as a
percentage between 0 and 100. 100% is the
unattainable rate which could only be
achieved by compressing all packets to zero
bits.ro Gauge .1.3.6.1.4.1.5.1.1.6.5.1.11 |
accCompressFfrStatHdrErrorsThe number of packets received with invalid
compression headers. A header error requires
a resynchronization of the history buffers at
each end of the link.ro Counter .1.3.6.1.4.1.5.1.1.6.5.1.12 |
accCompressFfrStatResyncsThe number of resynchronizations.ro Counter .1.3.6.1.4.1.5.1.1.6.5.1.13 |
accCompressFfrStatNoEndMarksThe number of packets received with no end
marker. Missing end markers require a
resynchronization of the history buffers at
each end of the link.ro Counter .1.3.6.1.4.1.5.1.1.6.5.1.14 |
accCompressFfrStatNoBufAvailsThe number of times the neighbor was
connected and no history buffer could be
allocated.ro Counter .1.3.6.1.4.1.5.1.1.6.5.1.15 |
accCompressX25StatTableData compression statistics table containing
data compression statistics for all active
X.25 neighbors. SEQUENCE OF AccCompressX25StatEntry .1.3.6.1.4.1.5.1.1.6.6 |
accCompressX25StatEntryData compression statistics table entry
containing data compression statistics for a
particular X.25 neighbor. AccCompressX25StatEntry .1.3.6.1.4.1.5.1.1.6.6.1 |
accCompressX25StatIfIndexThe physical port index of the port via
which the neighbor is accessed or connected.ro INTEGER .1.3.6.1.4.1.5.1.1.6.6.1.1 |
accCompressX25StatAddressDTE address for the X.25 neighbor.ro OCTET STRING .1.3.6.1.4.1.5.1.1.6.6.1.2 |
accCompressX25StatStatusThe operational status of the neighbor.ro Enumeration .1.3.6.1.4.1.5.1.1.6.6.1.3 |
accCompressX25StatOctetsInsThe total number of compressed octets
presented for decompression.ro Counter .1.3.6.1.4.1.5.1.1.6.6.1.4 |
accCompressX25StatOctetsOutsThe total number of compressed octets
generated after compression.ro Counter .1.3.6.1.4.1.5.1.1.6.6.1.5 |
accCompressX25StatPacketsInsThe total number of uncompressed packets
generated by decompression.ro Counter .1.3.6.1.4.1.5.1.1.6.6.1.6 |
accCompressX25StatPacketsOutsThe total number of uncompressed packets
presented for compression.ro Counter .1.3.6.1.4.1.5.1.1.6.6.1.7 |
accCompressX25StatUnCompInsThe total number of uncompressed packets
presented for decompression (i.e., packets
which could not be compressed and were
therefore received in their uncompressed
form).ro Counter .1.3.6.1.4.1.5.1.1.6.6.1.8 |
accCompressX25StatUnCompOutsThe total number of uncompressed packets
presented for compression which could not be
compressed (i.e., the packet expanded).
These packets are transmitted in their
uncompressed form.ro Counter .1.3.6.1.4.1.5.1.1.6.6.1.9 |
accCompressX25StatAvgCompInThe average compression rate of packets
presented for decompression expressed as a
percentage between 0 and 100. 100% is the
unattainable rate which could only be
achieved by compressing all packets to zero
bits.ro Gauge .1.3.6.1.4.1.5.1.1.6.6.1.10 |
accCompressX25StatAvgCompOutThe average compression rate of packets
presented for compression expressed as a
percentage between 0 and 100. 100% is the
unattainable rate which could only be
achieved by compressing all packets to zero
bits.ro Gauge .1.3.6.1.4.1.5.1.1.6.6.1.11 |
accCompressX25StatHdrErrorsThe number of packets received with invalid
compression headers. A header error requires
a resynchronization of the history buffers at
each end of the link.ro Counter .1.3.6.1.4.1.5.1.1.6.6.1.12 |
accCompressX25StatResyncsThe number of resynchronizations.ro Counter .1.3.6.1.4.1.5.1.1.6.6.1.13 |
accCompressX25StatNoEndMarksThe number of packets received with no end
marker. Missing end markers require a
resynchronization of the history buffers at
each end of the link.ro Counter .1.3.6.1.4.1.5.1.1.6.6.1.14 |
accCompressX25StatNoBufAvailsThe number of times the neighbor was
connected and no history buffer could be
allocated.ro Counter .1.3.6.1.4.1.5.1.1.6.6.1.15 |
accCompressPhysStatTableData compression statistics table for
physical ports containing aggregate data
compression statistics for all active and
inactive neighbors. SEQUENCE OF AccCompressPhysStatEntry .1.3.6.1.4.1.5.1.1.6.7 |
accCompressPhysStatEntryData compression statistics table entry
containing aggregate data compression
statistics for all neighbors through a
particular physical port. AccCompressPhysStatEntry .1.3.6.1.4.1.5.1.1.6.7.1 |
accCompressPhysStatIfIndexThe index of the physical port via which the
neighbor(s) is(are) accessed or connected.ro INTEGER .1.3.6.1.4.1.5.1.1.6.7.1.1 |
accCompressPhysStatStatusThe operational status of the neighbor. For
X.25 and Frame Relay ports, as there can be
more than one neighbor, this is the superior
status.ro Enumeration .1.3.6.1.4.1.5.1.1.6.7.1.2 |
accCompressPhysStatOctetsInsThe total number of compressed octets
presented for decompression.ro Counter .1.3.6.1.4.1.5.1.1.6.7.1.3 |
accCompressPhysStatOctetsOutsThe total number of compressed octets
generated after compression.ro Counter .1.3.6.1.4.1.5.1.1.6.7.1.4 |
accCompressPhysStatPacketsInsThe total number of uncompressed packets
generated by decompression.ro Counter .1.3.6.1.4.1.5.1.1.6.7.1.5 |
accCompressPhysStatPacketsOutsThe total number of uncompressed packets
presented for compression.ro Counter .1.3.6.1.4.1.5.1.1.6.7.1.6 |
accCompressPhysStatUnCompInsThe total number of uncompressed packets
presented for decompression (i.e., packets
which could not be compressed and were
therefore received in their uncompressed
form).ro Counter .1.3.6.1.4.1.5.1.1.6.7.1.7 |
accCompressPhysStatUnCompOutsThe total number of uncompressed packets
presented for compression which could not be
compressed (i.e., the packet expanded).
These packets are transmitted in their
uncompressed form.ro Counter .1.3.6.1.4.1.5.1.1.6.7.1.8 |
accCompressPhysStatAvgCompInThe average compression rate of packets
presented for decompression expressed as a
percentage between 0 and 100. 100% is the
unattainable rate which could only be
achieved by compressing all packets to zero
bits.ro Gauge .1.3.6.1.4.1.5.1.1.6.7.1.9 |
accCompressPhysStatAvgCompOutThe average compression rate of packets
presented for compression expressed as a
percentage between 0 and 100. 100% is the
unattainable rate which could only be
achieved by compressing all packets to zero
bits.ro Gauge .1.3.6.1.4.1.5.1.1.6.7.1.10 |
accCompressPhysStatHdrErrorsThe number of packets received with invalid
compression headers. A header error requires
a resynchronization of the history buffers at
each end of the link.ro Counter .1.3.6.1.4.1.5.1.1.6.7.1.11 |
accCompressPhysStatResyncsThe number of resynchronizations.ro Counter .1.3.6.1.4.1.5.1.1.6.7.1.12 |
accCompressPhysStatNoEndMarksThe number of packets received with no end
marker. Missing end markers require a
resynchronization of the history buffers at
each end of the link.ro Counter .1.3.6.1.4.1.5.1.1.6.7.1.13 |
accCompressPhysStatNoBufAvailsThe number of times the neighbor was
connected and no history buffer could be
allocated.ro Counter .1.3.6.1.4.1.5.1.1.6.7.1.14 |
accCompressPhysStatusInStatsThe current status of the incoming packet
port compression connection.ro Enumeration .1.3.6.1.4.1.5.1.1.6.7.1.15 |
accCompressPhysStatusOutStatsThe current status of the outgoing packet
port compression connection.ro Enumeration .1.3.6.1.4.1.5.1.1.6.7.1.16 |
accCompressPhysExpandInStatsThe number of incoming packets that have
been uncompressed.ro Counter .1.3.6.1.4.1.5.1.1.6.7.1.17 |
accCompressPhysExpandOutStatsThe number of outgoing packets that have
been uncompressed.ro Counter .1.3.6.1.4.1.5.1.1.6.7.1.18 |
accCompressPhysDiscardInStatsThe number of incoming packets that have
been discarded.ro Counter .1.3.6.1.4.1.5.1.1.6.7.1.19 |
accCompressPhysDiscardOutStatsThe number outgoing packets that have
been discarded.ro Counter .1.3.6.1.4.1.5.1.1.6.7.1.20 |
accCompressSmdsNeighborTableData compression neighbor table
for Smds connections containing data
compression parameters for selected
neighbors. SEQUENCE OF AccCompressSmdsNeighborEntry .1.3.6.1.4.1.5.1.1.6.8 |
accCompressSmdsNeighborEntryData compression neighbor table
entry containing data compression parameters
for a particular Smds neighbor. AccCompressSmdsNeighborEntry .1.3.6.1.4.1.5.1.1.6.8.1 |
accCompressSmdsNeighborIfIndexThe physical port index via which the
neighbor is accessed or connected.ro INTEGER .1.3.6.1.4.1.5.1.1.6.8.1.1 |
accCompressSmdsNeighborSNIA unique identifier for the neighbor. In
this case it is the remote SNI address.
This is the unicast Subscriber Network Interface
address of the remote side in E.164 address
format (e.g., 0xC18005551212FFFF)ro SmdsAddress (ACC-MIB) .1.3.6.1.4.1.5.1.1.6.8.1.2 |
accCompressSmdsNeighborStatusThe administrative status of data
compression for this neighbor. ON enables
data compression and OFF disables it.
Setting the status to INVALID permanently
removes the entry from the table.rw Enumeration .1.3.6.1.4.1.5.1.1.6.8.1.3 |
accCompressSmdsNeighborRowStatusThe current status of this neighbor entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.6.8.1.4 |
accCompressSmdsStatTableData compression statistics table containing
data compression statistics for all active
Smds neighbors. SEQUENCE OF AccCompressSmdsStatEntry .1.3.6.1.4.1.5.1.1.6.9 |
accCompressSmdsStatEntryData compression statistics table entry
containing data compression statistics for a
particular Smds neighbor. AccCompressSmdsStatEntry .1.3.6.1.4.1.5.1.1.6.9.1 |
accCompressSmdsStatIfIndexThe physical port index of the port via
which the neighbor is accessed or connected.ro INTEGER .1.3.6.1.4.1.5.1.1.6.9.1.1 |
accCompressSmdsStatSNIA unique identifier for the neighbor. In
this case it is the remote SNI address.
This is the unicast Subscriber Network Interface
address of the remote side in E.164 address
format (e.g., 0xC18005551212FFFF)rw SmdsAddress (ACC-MIB) .1.3.6.1.4.1.5.1.1.6.9.1.2 |
accCompressSmdsStatStatusThe operational status of the neighbor.ro Enumeration .1.3.6.1.4.1.5.1.1.6.9.1.3 |
accCompressSmdsStatOctetsInsThe total number of compressed octets
presented for decompression.ro Counter .1.3.6.1.4.1.5.1.1.6.9.1.4 |
accCompressSmdsStatOctetsOutsThe total number of compressed octets
generated after compression.ro Counter .1.3.6.1.4.1.5.1.1.6.9.1.5 |
accCompressSmdsStatPacketsInsThe total number of uncompressed packets
generated by decompression.ro Counter .1.3.6.1.4.1.5.1.1.6.9.1.6 |
accCompressSmdsStatPacketsOutsThe total number of uncompressed packets
presented for compression.ro Counter .1.3.6.1.4.1.5.1.1.6.9.1.7 |
accCompressSmdsStatUnCompInsThe total number of uncompressed packets
presented for decompression (i.e., packets
which could not be compressed and were
therefore received in their uncompressed
form).ro Counter .1.3.6.1.4.1.5.1.1.6.9.1.8 |
accCompressSmdsStatUnCompOutsThe total number of uncompressed packets
presented for compression which could not be
compressed (i.e., the packet expanded).
These packets are transmitted in their
uncompressed form.ro Counter .1.3.6.1.4.1.5.1.1.6.9.1.9 |
accCompressSmdsStatAvgCompInThe average compression rate of packets
presented for decompression expressed as a
percentage between 0 and 100. 100% is the
unattainable rate which could only be
achieved by compressing all packets to zero
bits.ro Gauge .1.3.6.1.4.1.5.1.1.6.9.1.10 |
accCompressSmdsStatAvgCompOutThe average compression rate of packets
presented for compression expressed as a
percentage between 0 and 100. 100% is the
unattainable rate which could only be
achieved by compressing all packets to zero
bits.ro Gauge .1.3.6.1.4.1.5.1.1.6.9.1.11 |
accCompressSmdsStatHdrErrorsThe number of packets received with invalid
compression headers. A header error requires
a resynchronization of the history buffers at
each end of the link.ro Counter .1.3.6.1.4.1.5.1.1.6.9.1.12 |
accCompressSmdsStatResyncsThe number of resynchronizations.ro Counter .1.3.6.1.4.1.5.1.1.6.9.1.13 |
accCompressSmdsStatNoEndMarksThe number of packets received with no end
marker. Missing end markers require a
resynchronization of the history buffers at
each end of the link.ro Counter .1.3.6.1.4.1.5.1.1.6.9.1.14 |
accCompressSmdsStatNoBufAvailsThe number of times the neighbor was
connected and no history buffer could be
allocated.ro Counter .1.3.6.1.4.1.5.1.1.6.9.1.15 |