ACC-ATMVP
AI MIB Summary
Standard SNMP MIB module defining data structures for ACC-ATMVP.
82
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
82 total| Object Name |
|---|
accAtmVp OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.73 |
IMPORTS Unknown .1.3.6.1.4.1.5.1.1.73 |
accVpTableThe Virtual port table. SEQUENCE OF AccVpEntry .1.3.6.1.4.1.5.1.1.73.1 |
accVpEntryAn entry in the virtual port table. AccVpEntry .1.3.6.1.4.1.5.1.1.73.1.1 |
oVirtualPortNameIfIndex for virtual port.ro IfIndex (ACC-MIB) .1.3.6.1.4.1.5.1.1.73.1.1.1 |
oVirtualPortAdminStateThe Admin state of a virtual port.rw Enumeration .1.3.6.1.4.1.5.1.1.73.1.1.2 |
oVirtualPortOperStateThe operational state of a virtual port.ro Enumeration .1.3.6.1.4.1.5.1.1.73.1.1.3 |
oVirtualPortProtocolThe protocol used over a virtual port.ro Enumeration .1.3.6.1.4.1.5.1.1.73.1.1.4 |
oVirtualPortQueueModeQueuing mode used. Currently only EXPRESS queueing.ro Enumeration .1.3.6.1.4.1.5.1.1.73.1.1.5 |
oVirtualPortCongestionThe congestion percent.ro INTEGER .1.3.6.1.4.1.5.1.1.73.1.1.6 |
oVirtualPortPhysicalPortThe physical port associated with a virtual port.ro INTEGER .1.3.6.1.4.1.5.1.1.73.1.1.7 |
accAtmVpScalarGrp OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.73.2 |
oVirtualPortCount1483BrThe RFC1483 virtual port count.rw INTEGER .1.3.6.1.4.1.5.1.1.73.2.1 |
oVirtualPortCountCIPThe CIP virtual port count.rw INTEGER .1.3.6.1.4.1.5.1.1.73.2.2 |
oVirtualPortCountTunnelThe Tunnel virtual port count.rw INTEGER .1.3.6.1.4.1.5.1.1.73.2.3 |
oVirtualPortCountFrfThe FRF virtual port count.rw INTEGER .1.3.6.1.4.1.5.1.1.73.2.4 |
oVirtualPortCountPppThe PPP over ATM virtual port count.rw INTEGER .1.3.6.1.4.1.5.1.1.73.2.6 |
oVirtualPortCountVFRThe Virtual Frame Relay virtual port count.rw INTEGER .1.3.6.1.4.1.5.1.1.73.2.7 |
oVirtualPortCountXOTThe XOT virtual port count.rw INTEGER .1.3.6.1.4.1.5.1.1.73.2.8 |
accAtmVpStatsGrp OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.73.3 |
accVpStatTableThe virtual port statistics table. SEQUENCE OF AccVpStatEntry .1.3.6.1.4.1.5.1.1.73.3.1 |
accVpStatEntryAn entry in the virtual port statistics table. AccVpStatEntry .1.3.6.1.4.1.5.1.1.73.3.1.1 |
oVpStatNameifIndex of the Virtual port.ro IfIndex (ACC-MIB) .1.3.6.1.4.1.5.1.1.73.3.1.1.1 |
oVpStatInPacketsReceived packets.ro Counter .1.3.6.1.4.1.5.1.1.73.3.1.1.2 |
oVpStatOutPacketsPackets sent out.ro Counter .1.3.6.1.4.1.5.1.1.73.3.1.1.3 |
oVpStatInOctetsOctets received.ro Counter .1.3.6.1.4.1.5.1.1.73.3.1.1.4 |
oVpStatOutOctetsOctets sent out.ro Counter .1.3.6.1.4.1.5.1.1.73.3.1.1.5 |
oVpStatInDiscardsNumber of receive discards.ro Counter .1.3.6.1.4.1.5.1.1.73.3.1.1.6 |
oVpStatOutDiscardsNumber of transmit discards.ro Counter .1.3.6.1.4.1.5.1.1.73.3.1.1.7 |
oVpStatNumChangedsNumber of changes.ro Counter .1.3.6.1.4.1.5.1.1.73.3.1.1.8 |
oVpStatInErrsNumber of received packets in error.ro Counter .1.3.6.1.4.1.5.1.1.73.3.1.1.9 |
oVpStatOutErrsNumber of packets attempted to transmit that were in error.ro Counter .1.3.6.1.4.1.5.1.1.73.3.1.1.10 |
accAtmVpFrfGrp OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.73.4 |
vpAtmFrfTableThe FRF (Frame relay network interworking over ATM) table. SEQUENCE OF VpAtmFrfEntry .1.3.6.1.4.1.5.1.1.73.4.1 |
vpAtmFrfEntryAn entry in the FRF table. VpAtmFrfEntry .1.3.6.1.4.1.5.1.1.73.4.1.1 |
oVpAtmFrfNameThe internal name for this portro IfIndex (ACC-MIB) .1.3.6.1.4.1.5.1.1.73.4.1.1.1 |
oVpAtmFrfRetryTimerThe amount of time before retrying to reconnect the circuitrw INTEGER .1.3.6.1.4.1.5.1.1.73.4.1.1.2 |
oVpAtmFrfRetryCountThe number of times to retry the connection before declaring that
the circuit is downrw INTEGER .1.3.6.1.4.1.5.1.1.73.4.1.1.3 |
oVpAtmFrfDlciLimitThe number of DLCI that can be active on this portrw INTEGER .1.3.6.1.4.1.5.1.1.73.4.1.1.4 |
oVpAtmFrfAddrLengthThe Frame Relay address length for this portrw INTEGER .1.3.6.1.4.1.5.1.1.73.4.1.1.5 |
oVpAtmFrfPvcDlciStartThe starting DLCI number for this portrw INTEGER .1.3.6.1.4.1.5.1.1.73.4.1.1.6 |
oVpAtmFrfPvcDlciEndThe ending DLCI number for this portrw INTEGER .1.3.6.1.4.1.5.1.1.73.4.1.1.7 |
oVpAtmFrfPvcVpiThe VPI for the circuit that needs to be created over this portrw INTEGER .1.3.6.1.4.1.5.1.1.73.4.1.1.8 |
oVpAtmFrfPvcVciThe VCI for the circuit that needs to be created overt his portrw INTEGER .1.3.6.1.4.1.5.1.1.73.4.1.1.9 |
oVpAtmFrfCongTimeOutThe amount of time that needs to elapse in seconds before declaring
that the circuit is down due to congestionrw INTEGER .1.3.6.1.4.1.5.1.1.73.4.1.1.10 |
oVpAtmFrfCellLossPrioInThe CLP for incoming cellsrw INTEGER .1.3.6.1.4.1.5.1.1.73.4.1.1.11 |
oVpAtmFrfCellLossPrioOutThe CLP for outgoing cellsrw INTEGER .1.3.6.1.4.1.5.1.1.73.4.1.1.12 |
oVpAtmFrfClpModeThe CLP mode for mapping from the DE bitrw INTEGER .1.3.6.1.4.1.5.1.1.73.4.1.1.13 |
accAtmVpPppGrp OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.73.5 |
vpAtmPppTableThe PPP over ATM configuration table. SEQUENCE OF VpAtmPppEntry .1.3.6.1.4.1.5.1.1.73.5.1 |
vpAtmPppEntryAn entry in the PPP over ATM configuration table. VpAtmPppEntry .1.3.6.1.4.1.5.1.1.73.5.1.1 |
oVpAtmPppNameThe internal name for this portro IfIndex (ACC-MIB) .1.3.6.1.4.1.5.1.1.73.5.1.1.1 |
oVpAtmPppRetryTimerThe amount of time to wait before retrying the connectionrw INTEGER .1.3.6.1.4.1.5.1.1.73.5.1.1.2 |
oVpAtmPppRetryCountThe number of time to retry for the connection if it not uprw INTEGER .1.3.6.1.4.1.5.1.1.73.5.1.1.3 |
oVpAtmPppVpiThe VPI for the circuit that needs to be created over this portrw INTEGER .1.3.6.1.4.1.5.1.1.73.5.1.1.4 |
oVpAtmPppVciThe VCI for the circuit that needs to be created over this portrw INTEGER .1.3.6.1.4.1.5.1.1.73.5.1.1.5 |
oVpAtmPppCongTimeOutThe amount of time to wait for the congestion to clear out before
declaring the circuit to be downrw INTEGER .1.3.6.1.4.1.5.1.1.73.5.1.1.6 |
oVpAtmPppMuxTypeThe multiplexing that needs to be done over this portrw INTEGER .1.3.6.1.4.1.5.1.1.73.5.1.1.7 |
accAtmVp1483Grp OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.73.6 |
vpAtm1483TableThe RFC1483 configuration table. SEQUENCE OF VpAtm1483Entry .1.3.6.1.4.1.5.1.1.73.6.1 |
vpAtm1483EntryAn entry in the RFC1483 configuration table. VpAtm1483Entry .1.3.6.1.4.1.5.1.1.73.6.1.1 |
oVpAtm1483NameThe internal name for this portro IfIndex (ACC-MIB) .1.3.6.1.4.1.5.1.1.73.6.1.1.1 |
oVpAtm1483RetryTimerThe amount of time to wait before retrying the connectionrw INTEGER .1.3.6.1.4.1.5.1.1.73.6.1.1.2 |
oVpAtm1483RetryCountThe number of time to retry for the connection if it not uprw INTEGER .1.3.6.1.4.1.5.1.1.73.6.1.1.3 |
oVpAtm1483VpiThe VPI for the circuit that needs to be created over this portrw INTEGER .1.3.6.1.4.1.5.1.1.73.6.1.1.4 |
oVpAtm1483VciThe VCI for the circuit that needs to be created over this portrw INTEGER .1.3.6.1.4.1.5.1.1.73.6.1.1.5 |
oVpAtm1483CongTimeOutThe amount of time to wait for the congestion to clear out before
declaring the circuit to be downrw INTEGER .1.3.6.1.4.1.5.1.1.73.6.1.1.6 |
oVpAtm1483MuxTypeThe multiplexing that needs to be done over this portrw INTEGER .1.3.6.1.4.1.5.1.1.73.6.1.1.7 |
accAtmVpCipGrp OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.73.7 |
vpAtmCipTableThe Classical IP over ATM configuration table. SEQUENCE OF VpAtmCipEntry .1.3.6.1.4.1.5.1.1.73.7.1 |
vpAtmCipEntryAn entry in the CIP table. VpAtmCipEntry .1.3.6.1.4.1.5.1.1.73.7.1.1 |
oVpAtmCipNameThe internal name for this portro IfIndex (ACC-MIB) .1.3.6.1.4.1.5.1.1.73.7.1.1.1 |
oVpAtmCipRetryTimerThe amount of time to wait before retrying the connectionrw INTEGER .1.3.6.1.4.1.5.1.1.73.7.1.1.2 |
oVpAtmCipRetryCountThe number of time to retry for the connection if it not uprw INTEGER .1.3.6.1.4.1.5.1.1.73.7.1.1.3 |
oVpAtmCipModeThe operation mode for this CIP portrw INTEGER .1.3.6.1.4.1.5.1.1.73.7.1.1.4 |
oVpAtmCipAgingThe time that needs to elapse in seconds before aging this circuitrw INTEGER .1.3.6.1.4.1.5.1.1.73.7.1.1.5 |
oVpAtmCipAddrTypeThe type of address supported ovwer this portrw INTEGER .1.3.6.1.4.1.5.1.1.73.7.1.1.6 |
oVpAtmCipLocalAddressThe local address for this port that is used in identifying this
instance on the atm networkrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.73.7.1.1.7 |
oVpAtmCipServerAddressThe address at which the server is reachablerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.73.7.1.1.8 |
oVpAtmCipServerVccTypeThe curcuit types the server will be able to acceptrw INTEGER .1.3.6.1.4.1.5.1.1.73.7.1.1.9 |
oVpAtmCipMtuThe MTU for this portrw INTEGER .1.3.6.1.4.1.5.1.1.73.7.1.1.10 |
oVpAtmCipPcrThe PCR to be used for the circuts over this portrw INTEGER .1.3.6.1.4.1.5.1.1.73.7.1.1.11 |