ACC-ATM
AI MIB Summary
Standard SNMP MIB module defining data structures for ACC-ATM.
62
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
62 total| Object Name |
|---|
accAtm OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.77 |
IMPORTS Unknown .1.3.6.1.4.1.5.1.1.77 |
atmStatsGrp OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.77.1 |
atmStatsAtmLayerTableThe ATM Layer Statistics Table. SEQUENCE OF AtmStatsAtmLayerEntry .1.3.6.1.4.1.5.1.1.77.1.1 |
atmStatsAtmLayerEntryAn entry in the ATM Layer Statistics Table AtmStatsAtmLayerEntry .1.3.6.1.4.1.5.1.1.77.1.1.1 |
atmStatsAtmLayerRxCellsTotal number of received cells.ro Counter .1.3.6.1.4.1.5.1.1.77.1.1.1.1 |
atmStatsAtmLayerTxCellsTotal number of transmitted cells.ro Counter .1.3.6.1.4.1.5.1.1.77.1.1.1.2 |
atmStatsAtmLayerDiscCellsTotal number of discarded cells.ro Counter .1.3.6.1.4.1.5.1.1.77.1.1.1.3 |
atmStatsAtmLayerDropCellsTotal number of dropped cells.ro Counter .1.3.6.1.4.1.5.1.1.77.1.1.1.4 |
atmStatsCallTableThe Call Statistics Table. SEQUENCE OF AtmStatsCallEntry .1.3.6.1.4.1.5.1.1.77.1.2 |
atmStatsCallEntryAn entry in the Call Statistics Table AtmStatsCallEntry .1.3.6.1.4.1.5.1.1.77.1.2.1 |
atmStatsCallOrigCallsNumber of calls originated from this interfacero Counter .1.3.6.1.4.1.5.1.1.77.1.2.1.1 |
atmStatsCallOffCallsNumber of calls offered to this interface.ro Counter .1.3.6.1.4.1.5.1.1.77.1.2.1.2 |
atmStatsCallAccCallsNumber of calls accepted.ro Counter .1.3.6.1.4.1.5.1.1.77.1.2.1.3 |
atmStatsCallCompCallsNumber of successfull/completed calls.ro Counter .1.3.6.1.4.1.5.1.1.77.1.2.1.4 |
atmStatsCallClrCallsNumber of calls cleared.ro Counter .1.3.6.1.4.1.5.1.1.77.1.2.1.5 |
atmOamGrp OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.77.5 |
atmOamConfTableThe OAM configuration table. SEQUENCE OF AtmOamConfEntry .1.3.6.1.4.1.5.1.1.77.5.1 |
atmOamConfEntryAn entry in the OAM configuration table. AtmOamConfEntry .1.3.6.1.4.1.5.1.1.77.5.1.1 |
atmOamIndexIndex into this table; must have same value as ifIndex.ro IfIndex (ACC-MIB) .1.3.6.1.4.1.5.1.1.77.5.1.1.1 |
atmOamPhyFlowTypeThe PHY level flows - f1, f2, or f3.rw Enumeration .1.3.6.1.4.1.5.1.1.77.5.1.1.2 |
atmOamFlowStateflow state on or off.rw Enumeration .1.3.6.1.4.1.5.1.1.77.5.1.1.3 |
atmOamVpcTableThe OAM VPC table. SEQUENCE OF AtmOamVpcEntry .1.3.6.1.4.1.5.1.1.77.5.2 |
atmOamVpcEntryAn entry in the OAM VPC Table. AtmOamVpcEntry .1.3.6.1.4.1.5.1.1.77.5.2.1 |
atmOamVpcIndexThe index into the OAM VPC table. Must have same value as ifIndex.ro IfIndex (ACC-MIB) .1.3.6.1.4.1.5.1.1.77.5.2.1.1 |
atmOamVpcVpiThe VPI of the VPC.ro INTEGER .1.3.6.1.4.1.5.1.1.77.5.2.1.2 |
atmOamVpcFlowTypeThe VPC flow type: end2end or segment.rw Enumeration .1.3.6.1.4.1.5.1.1.77.5.2.1.3 |
atmOamVpcRowStatusRowstatus for an entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.77.5.2.1.4 |
atmOamVccTableThe OAM VCC table. SEQUENCE OF AtmOamVccEntry .1.3.6.1.4.1.5.1.1.77.5.3 |
atmOamVccEntryAn entry in the OAM VCC Table. AtmOamVccEntry .1.3.6.1.4.1.5.1.1.77.5.3.1 |
atmOamVccIndexThe index into the OAM VCC table. Must have same value as ifIndex.ro IfIndex (ACC-MIB) .1.3.6.1.4.1.5.1.1.77.5.3.1.1 |
atmOamVccVpiThe VPI of the VCC.ro INTEGER .1.3.6.1.4.1.5.1.1.77.5.3.1.2 |
atmOamVccVciThe VCI of the VCC.ro INTEGER .1.3.6.1.4.1.5.1.1.77.5.3.1.3 |
atmOamVccFlowTypeThe VCC flow type: end2end or segment.rw Enumeration .1.3.6.1.4.1.5.1.1.77.5.3.1.4 |
atmOamVccRowStatusRowstatus for an entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.77.5.3.1.5 |
atmIlmiGrp OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.77.6 |
atmIlmiConfTableThe Ilmi Configuration Table. SEQUENCE OF AtmIlmiConfEntry .1.3.6.1.4.1.5.1.1.77.6.1 |
atmIlmiConfEntryAn entry in the Ilmi Configuration Table AtmIlmiConfEntry .1.3.6.1.4.1.5.1.1.77.6.1.1 |
atmIlmiImeTypeIME type: user/network/symmetric. In user mode, the
ILMI will be configured to initiate the connection. In
network mode, the ILMI listens for an ILMI connection. In
symmetric mode, it decides on whether to act as network or
user by talking to the peer. The default is user.rw Enumeration .1.3.6.1.4.1.5.1.1.77.6.1.1.1 |
atmIlmiUniTypeThe UNI type. This object maps to atmfAtmLayerUniType. If
private, then autoconfiguration procedures may be used to
automatically determine the interface type as described in
the ILMI4.0 specification. Procedures for interface type
determination for public devices is unspecified.rw Enumeration .1.3.6.1.4.1.5.1.1.77.6.1.1.2 |
atmIlmiCommStrTableThe community string table for an interface. SEQUENCE OF AtmIlmiCommStrEntry .1.3.6.1.4.1.5.1.1.77.6.2 |
atmIlmiCommStrEntryAn entry in the atmIlmiCommStrTable. AtmIlmiCommStrEntry .1.3.6.1.4.1.5.1.1.77.6.2.1 |
atmIlmiCommStrIndexifIndex of an ATM interface to which a set of community
strings is associated.ro IfIndex (ACC-MIB) .1.3.6.1.4.1.5.1.1.77.6.2.1.1 |
atmIlmiCommStrA community string for an interface.rw OCTET STRING .1.3.6.1.4.1.5.1.1.77.6.2.1.2 |
atmIlmiCommStrStatusModification status of this entry; setting the
status to add causes a new entry to be added. Setting it
to delete causes an existing entry to be deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.77.6.2.1.3 |
atmInstGrp OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.77.9 |
accAtmIfTableAtm interface table, holds just the ifIndex to get around
ifIndex not being specifically included in rfc1695. Any
place that ifIndex (pertaining to ATM is desired), this
object should be used. SEQUENCE OF AccAtmIfEntry .1.3.6.1.4.1.5.1.1.77.9.1 |
accAtmIfEntryAn entry in the atm interface tbl. Holds just ifIndex. AccAtmIfEntry .1.3.6.1.4.1.5.1.1.77.9.1.1 |
accAtmIfIndexIfindex for ATM interfaces. Must have the same value as
the SNMP ifIndex object for this interface.ro IfIndex (ACC-MIB) .1.3.6.1.4.1.5.1.1.77.9.1.1.1 |
accAtmVplTableThe ACC atm vpl table; provides ifIndex and vpi to be used
as instance ids. SEQUENCE OF AccAtmVplEntry .1.3.6.1.4.1.5.1.1.77.9.2 |
accAtmVplEntryAn entry in the accAtmVplTable. AccAtmVplEntry .1.3.6.1.4.1.5.1.1.77.9.2.1 |
accAtmVplIndexIfIndex of the VPL table. Must have same value as the
ifIndex object.ro IfIndex (ACC-MIB) .1.3.6.1.4.1.5.1.1.77.9.2.1.1 |
accAtmVplVpiThe VPI value of the VPL. Note that the VPI=0 is not used
VPL not associated with a VCL. The maximum VPI value cannot
exceed the value allowable by the atmInterfaceMaxVpiBits.ro INTEGER .1.3.6.1.4.1.5.1.1.77.9.2.1.2 |
accAtmVclTableThe ACC atm VCL table; provides ifIndex, vpi and vci to be used
as instance ids. SEQUENCE OF AccAtmVclEntry .1.3.6.1.4.1.5.1.1.77.9.3 |
accAtmVclEntryAn entry in the accAtmVclTable. AccAtmVclEntry .1.3.6.1.4.1.5.1.1.77.9.3.1 |
accAtmVclIndexIfIndex of the VCL table. Must have same value as the
ifIndex object.ro IfIndex (ACC-MIB) .1.3.6.1.4.1.5.1.1.77.9.3.1.1 |
accAtmVclVpiThe VPI value of the VCL.
The maximum VPI value cannot
exceed the value allowable by the
atmInterfaceMaxVpiBits.ro INTEGER .1.3.6.1.4.1.5.1.1.77.9.3.1.2 |
accAtmVclVciThe VCI value of the VCL.
The maximum VCI value cannot
exceed the value allowable by the
atmInterfaceMaxVciBits.ro INTEGER .1.3.6.1.4.1.5.1.1.77.9.3.1.3 |
accAtmClockTableThe ACC atm CLOCK table; provides ifIndex and clockType to be used
as instance ids. SEQUENCE OF AccAtmClockEntry .1.3.6.1.4.1.5.1.1.77.9.4 |
accAtmClockEntryAn entry in the accAtmClockTable. AccAtmClockEntry .1.3.6.1.4.1.5.1.1.77.9.4.1 |
accAtmClockIndexIfIndex of the CLOCK table. Must have same value as the
ifIndex object.ro IfIndex (ACC-MIB) .1.3.6.1.4.1.5.1.1.77.9.4.1.1 |
accAtmClockTypeThe clock type of the Interface.
The clock type is either external
or internal.rw Enumeration .1.3.6.1.4.1.5.1.1.77.9.4.1.2 |