ACC-ACCESSPARTITION
AI MIB Summary
Standard SNMP MIB module defining data structures for ACC-ACCESSPARTITION.
44
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
44 total| Object Name |
|---|
accAccessPartition OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.63 |
IMPORTS Unknown .1.3.6.1.4.1.5.1.1.63 |
accAccessPartitionTableThe Access Partition Table SEQUENCE OF AccAccessPartitionEntry .1.3.6.1.4.1.5.1.1.63.1 |
accAccessPartitionEntryAn entry in the Access Partition Table AccAccessPartitionEntry .1.3.6.1.4.1.5.1.1.63.1.1 |
accAccessPartitionNameThe name of the access partition. This name serves as the
handle for accessing information in the Access Partition
Table.ro DisplayString -- .1.3.6.1.4.1.5.1.1.63.1.1.1 |
accAccessPartitionCustomerIdAn arbitrary string describing the customer to whom this
access partition is assigned.rw DisplayString -- .1.3.6.1.4.1.5.1.1.63.1.1.2 |
accAccessPartitionAdminStateThe administrative state of this partition. If the
administrative state is set to disabled, no new connections
will be allowed using this access partition, and all existing
connections using the partition will be terminated. If the
administrative state is set to drained, no new connections
will be accepted, but existing connections will be
maintained.rw Enumeration .1.3.6.1.4.1.5.1.1.63.1.1.3 |
accAccessPartitionMsgLevelThe current severity level of trap messages that may be
generated regarding events associated with this access
partition. Only trap messages whose serverity level is less
than or equal to the current setting of this object will be
displayed.rw INTEGER .1.3.6.1.4.1.5.1.1.63.1.1.4 |
accAccessPartitionPortLimitThe maximum number of physical port connections that
may be simultaneously served by this access partition. Each
physical link in a multilink bundle counts as one connection.
A value of zero indicates there is no limit to the number of
simultaneous connections.rw INTEGER .1.3.6.1.4.1.5.1.1.63.1.1.5 |
accAccessPartitionIpAddrPriThe IP address of the primary home gateway into the
customer's network. All incoming packets from user
connections belonging to this partition will be routed to the
IP home gateway address instead of the destination address
in the IP packet header.rw IpAddress .1.3.6.1.4.1.5.1.1.63.1.1.6 |
accAccessPartitionIpAddrSecThe IP address of the secondary home gateway into the
customer's network. If the primary home gateway is not
reachable, the secondary home gateway will be used in its
place.rw IpAddress .1.3.6.1.4.1.5.1.1.63.1.1.7 |
accAccessPartitionRoutePolicyThe route policy for this access partition. If the route
policy is 'funnel' (the default), then all incoming user
packets will be routed (i.e., funneled) to the IP home
gateway. If the route policy is 'route', then destinations that
are reachable via another port belonging to the same access
partition will be routed to directly.rw Enumeration .1.3.6.1.4.1.5.1.1.63.1.1.8 |
accAccessPartitionBusyCountThe number of internal resources currently bound to this
access partition. If the busy count is non-zero, the access
partition entry cannot be removed.ro Gauge .1.3.6.1.4.1.5.1.1.63.1.1.9 |
accAccessPartitionNumAcceptsThe number of incoming or outgoing connection requests
accepted for this access partition.ro Counter .1.3.6.1.4.1.5.1.1.63.1.1.10 |
accAccessPartitionNumRejectsThe number of incoming or outgoing connection requests
rejected for this access partition.ro Counter .1.3.6.1.4.1.5.1.1.63.1.1.11 |
accAccessPartitionNumActiveThe current number of connected physical ports belonging
to this access partition. Each physical link in a multilink
bundle counts as one connection.ro Gauge .1.3.6.1.4.1.5.1.1.63.1.1.12 |
accAccessPartitionAuthFailsThe number of connection requests rejected due to an
authentication failure.ro Counter .1.3.6.1.4.1.5.1.1.63.1.1.13 |
accAccessPartitionConnectTimeThe total amount of connect time accumulated for this
access partition.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.5.1.1.63.1.1.14 |
accAccessPartitionInOctetsThe total number octets input from connections belonging
to this access partition.ro Counter .1.3.6.1.4.1.5.1.1.63.1.1.15 |
accAccessPartitionOutOctetsThe total number octets output to connections belonging to
this access partition.ro Counter .1.3.6.1.4.1.5.1.1.63.1.1.16 |
accAccessPartitionInPacketsThe total number packets input from connections belonging
to this access partition.ro Counter .1.3.6.1.4.1.5.1.1.63.1.1.17 |
accAccessPartitionOutPacketsThe total number packets output to connections belonging
to this access partition.ro Counter .1.3.6.1.4.1.5.1.1.63.1.1.18 |
accAccessPartitionEntryStatusThe modification status of this access partition entry.
Setting the status to add causes a new entry to be added.
Setting the status to deleete causes an existing entry to be
deleted.rw Enumeration .1.3.6.1.4.1.5.1.1.63.1.1.19 |
accAccessPartitionNumDiscardsThe total number of packets discarded because of an
unreachable destination or IP home gateway.ro Counter .1.3.6.1.4.1.5.1.1.63.1.1.20 |
accAccessPartitionNumDirectsThe total number packets routed directly to the normal IP
destination address.ro Counter .1.3.6.1.4.1.5.1.1.63.1.1.21 |
accAccessPartitionNumFunnelsThe total number packets funneled to the primary or
secondary IP home gateway address.ro Counter .1.3.6.1.4.1.5.1.1.63.1.1.22 |
accAccessPartitionProxyServerThe name of an access partition that will provide the
Radius authenticationand accounting feature on behalf
of this partition.
If no proxy server is configured, only Radius
accounting and authentication servers associated with this
access partition will be used.rw DisplayString -- .1.3.6.1.4.1.5.1.1.63.1.1.23 |
accAccessPartitionIngrFiltStateThe administrative status of ingress filtering on this
partitionrwobsolete Enumeration .1.3.6.1.4.1.5.1.1.63.1.1.24 |
accAccessPartitionDnsServPriThe IP address of the primary DNS server of the
customer's network.rwobsolete IpAddress .1.3.6.1.4.1.5.1.1.63.1.1.25 |
accAccessPartitionDnsServSecThe IP address of the secondary DNS server of the
customer's network.rwobsolete IpAddress .1.3.6.1.4.1.5.1.1.63.1.1.26 |
accAccessPartitionNbnsServPriThe IP address of the primary NBNS server of the
customer's network.rwobsolete IpAddress .1.3.6.1.4.1.5.1.1.63.1.1.27 |
accAccessPartitionNbnsServSecThe IP address of the secondary NBNS server of the
customer's network.rwobsolete IpAddress .1.3.6.1.4.1.5.1.1.63.1.1.28 |
accAccessPartitionIpPoolThe access partition name to which the ip address pool
is assigned.rwobsolete DisplayString -- .1.3.6.1.4.1.5.1.1.63.1.1.29 |
accAccessPartitionProxyIpPoolThe name of an access partition that will provide the Ip
pool management on behalf of this partition.
If no proxy ip pool is configured, only the ip pools
associated with this access partition will be used.rw DisplayString -- .1.3.6.1.4.1.5.1.1.63.1.1.30 |
accAccessPartitionProxyIpRouterThe name of an access partition that will provide the Ip
routing on behalf of this partition.
If no proxy ip router is configured, only the ip routes
associated with this access partition will be used.rw DisplayString -- .1.3.6.1.4.1.5.1.1.63.1.1.31 |
accAccessPartitionPortTableThe Access Partition Port Table SEQUENCE OF AccAccessPartitionPortEntry .1.3.6.1.4.1.5.1.1.63.2 |
accAccessPartitionPortEntryAn entry in the Access Partition Port Table AccAccessPartitionPortEntry .1.3.6.1.4.1.5.1.1.63.2.1 |
accAccessPartitionIfIndexThe interface index of the physical port associated with this
entry.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.5.1.1.63.2.1.1 |
accAccessPartitionConfiguredNameThe name of the access partition configured for this
physical port. The access partition name is acquired from
the service profile manually configured for the same
physical port.ro DisplayString -- .1.3.6.1.4.1.5.1.1.63.2.1.2 |
accAccessPartitionActiveNameThe name of the access partition currently active for this
physical port. The access partition name is acquired from
the service profile dynamically assigned to the physical
port.ro DisplayString -- .1.3.6.1.4.1.5.1.1.63.2.1.3 |
accAccessPartitionActiveCustomerThe customer identifier string obtained from the active
access partition.ro DisplayString -- .1.3.6.1.4.1.5.1.1.63.2.1.4 |
accAccessPartitionTraps OBJECT IDENTIFIER .1.3.6.1.4.1.5.1.1.63.3 |
accAPDelApTrapThis trap indicates that the access partition to be
deleted is still in use. Probably, some users are
still connected and the access partition is active.
SEVERITY-DEFAULT: Warning
EVENTTYPE-DEFAULT: 10
ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accAccessPartitionTrapMsg }
PCAUSE-DEFAULT: 7 TRAP-TYPE .1.3.6.1.4.1.5.1.1.63.3.0.1 |
accAccessPartitionTrapMsgAccess Partition Trap Messagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5.1.1.63.3.1 |