A3COM-SWITCHING-SYSTEMS-FDDI-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-FDDI-MIB.
69
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
69 total| Object Name |
|---|
a3Com OBJECT IDENTIFIER .1.3.6.1.4.1.43 |
RFC1155-SMI Unknown .1.3.6.1.4.1.43 |
switchingSystemsMibs OBJECT IDENTIFIER .1.3.6.1.4.1.43.29 |
a3ComSwitchingSystemsFddiMib OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.10 |
a3ComFddiSMTHoldConditionGenerated when fddiSMTHoldState (fddimibSMTHoldState)
assumes the state holding-prm or holding-sec. This
notification is a Condition in the Status Report
Protocol (see 7.2.7 and 8.3). TRAP-TYPE .1.3.6.1.4.1.43.29.10.0.1 |
a3ComFddiSMTPeerWrapConditionThis condition is active when fddiSMTPeerWrapFlag
(fddimibSMTPeerWrapFlag) is set. This notification is
a Condition in the Status Report Protocol (see 7.2.7
and 8.3). TRAP-TYPE .1.3.6.1.4.1.43.29.10.0.2 |
a3ComFddiMACDuplicateAddressConditionThis condition is active when either fddiMACDA-Flag
(fddimibMACDaFlag) or fddiMACUNDA-Flag
(fddimibMACUnaDaFlag) is set. This event is handled
as a Condition in the Status Report Protocol (see 7.2.7
and 8.3). TRAP-TYPE .1.3.6.1.4.1.43.29.10.0.3 |
a3ComFddiMACFrameErrorConditionGenerated when the fddiMACFrameErrorRatio
(fddimibMACFrameErrorRatio) is greater than or equal
to fddiMACFrameErrorThreshold
(fddimibMACFrameErrorThreshold). This event is handled
as a Condition in the Status Report Protocol (see 7.2.7
and 8.3). TRAP-TYPE .1.3.6.1.4.1.43.29.10.0.4 |
a3ComFddiMACNotCopiedConditionGenerated when the fddiMACNotCopiedRatio
(fddimibMACNotCopiedRatio) is greater than or equal to
the fddiMACNotCopiedThreshold (a3ComFddiMACNotCopiedThreshold).
This event is handled as a Condition in the Status Report
Protocol (see 7.2.7 and 8.3). TRAP-TYPE .1.3.6.1.4.1.43.29.10.0.5 |
a3ComFddiMACNeighborChangeEventGenerated when a change in a MAC's upstream neighbor
address or downstream neighbor address is detected.
(see 7.2.7 and 8.3). TRAP-TYPE .1.3.6.1.4.1.43.29.10.0.6 |
a3ComFddiMACPathChangeEventThis event is generated when the value of the
fddiMACCurrentPath (fddimibMACCurrentPath) changes.
This event shall be supressed if the value changes
from isolated to local or local to isolated (see
7.2.7 and 8.3). TRAP-TYPE .1.3.6.1.4.1.43.29.10.0.7 |
a3ComFddiPORTLerConditionThis condition becomes active when the value of
fddiPORTLer-Estimate (fddimibPORTLerEstimate)
is less than or equal to fddiPORTLer-Alarm
(fddimibPORTLerAlarm). This will be reported
with the Status Report Frames (SRF) (see 7.2.7
and 8.3). TRAP-TYPE .1.3.6.1.4.1.43.29.10.0.8 |
a3ComFddiPORTUndesiredConnAttemptEventGenerated when an undesired connection attempt has
been made (see 5.2.4, 7.2.7, and 8.3). TRAP-TYPE .1.3.6.1.4.1.43.29.10.0.9 |
a3ComFddiPORTEBErrorConditionGenerated when the Elasticity Buffer Error-Ct
(a3ComFddiPORTEBErrorCt) increments. This is handled
as a condition in the Status Report Protocol. It
is generated when an increment occurs in the
station's sampling period (see 7.2.7 and 8.3). TRAP-TYPE .1.3.6.1.4.1.43.29.10.0.10 |
a3ComFddiPORTPathChangeEventThis event is generated when the value of the
fddiPORTCurrentPath (a3ComFddiPORTCurrentPath)
changes. This event shall be surpressed if the
value changes from isolated to local or local
to isolated (see 7.2.7 and 8.3). TRAP-TYPE .1.3.6.1.4.1.43.29.10.0.11 |
a3ComFddiSMT OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.10.1 |
a3ComFddiSMTTableA list of optional SMT entries. The number of entries
shall not exceed the value of snmpFddiSMTNumber. SEQUENCE OF A3ComFddiSMTEntry .1.3.6.1.4.1.43.29.10.1.1 |
a3ComFddiSMTEntryAn optional SMT entry containing information common to
a given optional SMT. A3ComFddiSMTEntry .1.3.6.1.4.1.43.29.10.1.1.1 |
a3ComFddiSMTIndexA unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization.ro INTEGER .1.3.6.1.4.1.43.29.10.1.1.1.1 |
a3ComFddiSMTManufacturerOUIThe three octets of manufacturer data which make
up the manufacturerOUI component.ro OCTET STRING .1.3.6.1.4.1.43.29.10.1.1.1.2 |
a3ComFddiSMTManufacturerDataThe 29 octets of manufacturer data which make up the
manufacturerData component.ro OCTET STRING .1.3.6.1.4.1.43.29.10.1.1.1.3 |
a3ComFddiSMTHoldStateThis variable indicates the current state of the
Hold function. The value 'not-holding' is the
default and initial value. The value must be set
to 'not-holding' as part of Active-Actions and
when the conditions causing 'holding-prm' or
'holding-sec' are no longer true. The value
'holding-prm' must be set when the condition
(notTR-Flag & not RE-Flag & (PC-LS=QLS | LEM-Fail
TNE>NS-Max | (not LS-Flag & TPC > T-Out))) is
satisfied in state PC8:ACTIVE for the A Port. The
value 'holding-sec' must be set when the condition
(notTR-Flag & not RE-Flag & (PC-LS=QLS | LEM-Fail
TNE>NS-Max | (not LS-Flag & TPC > T-Out))) is
satisfied in state PC8:ACTIVE for the B Port.ro Enumeration .1.3.6.1.4.1.43.29.10.1.1.1.4 |
a3ComFddiSMTSetCountThis variable is composed of a count incremented
in response to a Set operation on the MIB, and the
time of the change, however only the count is
reported here (refer to ANSI SMT 8.4.1).ro INTEGER .1.3.6.1.4.1.43.29.10.1.1.1.5 |
a3ComFddiSMTLastSetStationIdThe Station ID of the station that effected the last
change in the FDDI MIB.ro FddiSMTStationIdType .1.3.6.1.4.1.43.29.10.1.1.1.6 |
a3ComFddiMAC OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.10.2 |
a3ComFddiMACBridgeFunctionTableA list of MAC bridge function entries. SEQUENCE OF A3ComFddiMACBridgeFunctionEntry .1.3.6.1.4.1.43.29.10.2.1 |
a3ComFddiMACBridgeFunctionEntryBridge function information for a given MAC
within a given SMT. A3ComFddiMACBridgeFunctionEntry .1.3.6.1.4.1.43.29.10.2.1.1 |
a3ComFddiMACBridgeFunctionSMTIndexA unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization.ro INTEGER .1.3.6.1.4.1.43.29.10.2.1.1.1 |
a3ComFddiMACBridgeFunctionMACIndexIndex variable for uniquely identifying the MAC
object instances.ro INTEGER .1.3.6.1.4.1.43.29.10.2.1.1.2 |
a3ComFddiMACBridgeFunctionsIndicates the MAC's optional bridging functions.
The Value -1 is used to indicate that bridging is
not supported by this MAC.
The value is a sum. This value initially takes
the value zero, then for each function present, 2
raised to a power is added to the sum. The powers
are according to the following table:
Function Power
tb 0
sr 1
srt 2ro INTEGER (-1..7) .1.3.6.1.4.1.43.29.10.2.1.1.3 |
a3ComFddiMACTPriTableA list of MAC T-Pri entries. SEQUENCE OF A3ComFddiMACTPriEntry .1.3.6.1.4.1.43.29.10.2.2 |
a3ComFddiMACTPriEntryA collection of T-Pri information for a given MAC within
a given SMT. A3ComFddiMACTPriEntry .1.3.6.1.4.1.43.29.10.2.2.1 |
a3ComFddiMACTPriSMTIndexA unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization.ro INTEGER .1.3.6.1.4.1.43.29.10.2.2.1.1 |
a3ComFddiMACTPriMACIndexIndex variable for uniquely identifying the MAC
object instances.ro INTEGER .1.3.6.1.4.1.43.29.10.2.2.1.2 |
a3ComFddiMACTPri0This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.ro FddiTimeNano .1.3.6.1.4.1.43.29.10.2.2.1.3 |
a3ComFddiMACTPri1This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.ro FddiTimeNano .1.3.6.1.4.1.43.29.10.2.2.1.4 |
a3ComFddiMACTPri2This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.ro FddiTimeNano .1.3.6.1.4.1.43.29.10.2.2.1.5 |
a3ComFddiMACTPri3This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.ro FddiTimeNano .1.3.6.1.4.1.43.29.10.2.2.1.6 |
a3ComFddiMACTPri4This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.ro FddiTimeNano .1.3.6.1.4.1.43.29.10.2.2.1.7 |
a3ComFddiMACTPri5This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.ro FddiTimeNano .1.3.6.1.4.1.43.29.10.2.2.1.8 |
a3ComFddiMACTPri6This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.ro FddiTimeNano .1.3.6.1.4.1.43.29.10.2.2.1.9 |
a3ComFddiPATH OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.10.3 |
a3ComFddiPATHRingTableA list of PATH ring entries. SEQUENCE OF A3ComFddiPATHRingEntry .1.3.6.1.4.1.43.29.10.3.1 |
a3ComFddiPATHRingEntryRing latency, trace status, and T-Rmode information for a
given PATH within a given SMT. A3ComFddiPATHRingEntry .1.3.6.1.4.1.43.29.10.3.1.1 |
a3ComFddiPATHRingSMTIndexA unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization.ro INTEGER .1.3.6.1.4.1.43.29.10.3.1.1.1 |
a3ComFddiPATHRingPATHIndexIndex variable for uniquely identifying the
primary, secondary and local PATH object
instances. Local PATH object instances are
represented with integer values 3 to 255.ro INTEGER .1.3.6.1.4.1.43.29.10.3.1.1.2 |
a3ComFddiPATHRingLatencyGives the total accumulated latency of the ring
associated with this path. May be measured directly
by the station or calculated by a management station.
Values of this object are reported in 1 ns units.rw FddiTimeNano .1.3.6.1.4.1.43.29.10.3.1.1.3 |
a3ComFddiPATHTraceStatusThis attribute indicates the current trace status of
the path.
The value is a sum which represents all of the trace
status information which applies. This value initially
takes the value zero, then for each condition which
applies, 2 raised to a power is added to the sum. the
powers are according to the following table:
TraceStatus Power
traceinitiated 0
tracepropragated 1
traceterminated 2
tracetimeout 3ro INTEGER .1.3.6.1.4.1.43.29.10.3.1.1.4 |
a3ComFddiPATHT-RmodeUsed by RMT to limit the duration of restricted dialogs
on a path. This object is reported in 1 ns units.rw FddiTimeNano .1.3.6.1.4.1.43.29.10.3.1.1.5 |
a3ComFddiPATHSbaTableA list of PATH Sba entries. SEQUENCE OF A3ComFddiPATHSbaEntry .1.3.6.1.4.1.43.29.10.3.2 |
a3ComFddiPATHSbaEntrySba information for a given PATH within a given SMT. A3ComFddiPATHSbaEntry .1.3.6.1.4.1.43.29.10.3.2.1 |
a3ComFddiPATHSbaSMTIndexA unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization.ro INTEGER .1.3.6.1.4.1.43.29.10.3.2.1.1 |
a3ComFddiPATHSbaPATHIndexIndex variable for uniquely identifying the
primary, secondary and local PATH object
instances. Local PATH object instances are
represented with integer values 3 to 255.ro INTEGER .1.3.6.1.4.1.43.29.10.3.2.1.2 |
a3ComFddiPATHSbaPayloadThe payload portion of the Synchronous Bandwidth
Allocation for thi path. This value represents the
maximum number of bytes of data allocated for
transmission per 125 microseconds.rw INTEGER .1.3.6.1.4.1.43.29.10.3.2.1.3 |
a3ComFddiPATHSbaOverheadThe overhead portion of the Synchronous Bandwith
Allocation for this path. This value repersents the
maximum number of bytes overhead (token capture, frame
header, etc.) used pre negotiated Target Token Rotation
Time (T-neg).rw INTEGER .1.3.6.1.4.1.43.29.10.3.2.1.4 |
a3ComFddiPATHSbaAvailableThis value is the maximum Synchronous Bandwith available
for a path in bytes per second.rw INTEGER .1.3.6.1.4.1.43.29.10.3.2.1.5 |
a3ComFddiPORT OBJECT IDENTIFIER .1.3.6.1.4.1.43.29.10.4 |
a3ComFddiPORTTableA list of optional PORT entries. SEQUENCE OF A3ComFddiPORTEntry .1.3.6.1.4.1.43.29.10.4.1 |
a3ComFddiPORTEntryMAC loop time and EB error count information for a
given PORT within a given SMT. A3ComFddiPORTEntry .1.3.6.1.4.1.43.29.10.4.1.1 |
a3ComFddiPORTSMTIndexA unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization.ro INTEGER .1.3.6.1.4.1.43.29.10.4.1.1.1 |
a3ComFddiPORTIndexIndex variable for uniquely identifying the PORT
object instances.ro INTEGER .1.3.6.1.4.1.43.29.10.4.1.1.2 |
a3ComFddiPORTMACLoopTimeThis attribute controls the value used for T-Next(9)
(see 9.4.4.2.3). This object is reported in 1 ns
units.rw FddiTimeNano .1.3.6.1.4.1.43.29.10.4.1.1.3 |
a3ComFddiPORTEBErrorCtA count that should as closely as possible match the
times an Elasticity Buffer Error has occurred while in
active line state.ro Counter .1.3.6.1.4.1.43.29.10.4.1.1.4 |
a3ComFddiPORTLSTableA list of optional PORT line state entries. SEQUENCE OF A3ComFddiPORTLSEntry .1.3.6.1.4.1.43.29.10.4.2 |
a3ComFddiPORTLSEntryMaintenance line state and PC line state information
for a given PORT within a given SMT. A3ComFddiPORTLSEntry .1.3.6.1.4.1.43.29.10.4.2.1 |
a3ComFddiPORTLSSMTIndexA unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization.ro INTEGER .1.3.6.1.4.1.43.29.10.4.2.1.1 |
a3ComFddiPORTLSPORTIndexIndex variable for uniquely identifying the PORT
object instances.ro INTEGER .1.3.6.1.4.1.43.29.10.4.2.1.2 |
a3ComFddiPORTMaintLSThe PORT Maintenance Line State specifies the line state
(Maint-LS) to be transmitted when the PCM state machine
for the port is in state PC9 Maint.rw Enumeration .1.3.6.1.4.1.43.29.10.4.2.1.3 |
a3ComFddiPORTPCLSThis attribute indicates the line state (PC-LS) received
by the port.ro Enumeration .1.3.6.1.4.1.43.29.10.4.2.1.4 |