A3COM-HUAWEI-LswRSTP-MIB
Standard SNMP MIB module defining data structures for A3COM-HUAWEI-LswRSTP-MIB.
Imported Objects
Objects
40 total| Object Name |
|---|
hwLswRstpMib MODULE-IDENTITY .1.3.6.1.4.1.43.45.1.2.23.1.6 |
hwLswRstpMibObject OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.2.23.1.6.1 |
hwRstpEventsV2Definition point for RSTP notifications. OBJECT IDENTIFIER .1.3.6.1.4.1.43.45.1.2.23.1.6.1.0 |
hwRstpBpduGuardedThe SNMP trap that is generated when an edged port of the BPDU-guard switch recevies BPDU packets. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.6.1.0.1 |
hwRstpRootGuardedThe SNMP trap that is generated when a root-guard port receives a superior bpdu. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.6.1.0.2 |
hwRstpBridgeLostRootPrimaryThe SNMP trap that is generated when the bridge is no longer the root bridge of the spanning tree. Another switch with higher priority has already been the root bridge. NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.6.1.0.3 |
hwRstpLoopGuardedThe SNMP trap that is generated when a loop-guard port is aged out . NOTIFICATION-TYPE .1.3.6.1.4.1.43.45.1.2.23.1.6.1.0.4 |
hwdot1dStpStatusBridge STP enabled/disabled staterw EnabledStatus .1.3.6.1.4.1.43.45.1.2.23.1.6.1.1 |
hwdot1dStpForceVersionRunning mode of the bridge RSTP state machinerw Enumeration .1.3.6.1.4.1.43.45.1.2.23.1.6.1.2 |
hwdot1dStpDiameterPermitted amount of bridges between any two ends on the network.rw INTEGER .1.3.6.1.4.1.43.45.1.2.23.1.6.1.3 |
hwdot1dStpRootBridgeAddressMAC address of the root bridgero MacAddress (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.2.23.1.6.1.4 |
hwdot1dStpPortXTableRSTP extended information of the port SEQUENCE OF HwDot1dStpPortXEntry .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5 |
hwdot1dStpPortXEntryRSTP extended information of the port HwDot1dStpPortXEntry .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1 |
hwdot1dStpPortStatusRSTP status of the portrw EnabledStatus .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1.1 |
hwdot1dStpPortEdgeportWhether the port can be an edge portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1.2 |
hwdot1dStpPortPointToPointIt is the administrative value indicates whether the port can be connected to a point-to-point link or not. If the value is 'auto', the operative value of a point-to-point link state is determined by device itself, and can be read from hwdot1dStpOperPortPointToPoint.rw Enumeration .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1.3 |
hwdot1dStpMcheckCheck if the port transfer state machine entersrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1.4 |
hwdot1dStpTransLimitPacket transmission limit of the bridge in a duration of Hello Time.rw INTEGER .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1.5 |
hwdot1dStpRXStpBPDUNumber of STP BPDU receivedro Counter32 .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1.6 |
hwdot1dStpTXStpBPDUNumber of STP BPDU transmittedro Counter32 .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1.7 |
hwdot1dStpRXTCNBPDUNumber of TCN BPDU receivedro Counter32 .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1.8 |
hwdot1dStpTXTCNBPDUNumber of TCN BPDU transmittedro Counter32 .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1.9 |
hwdot1dStpRXRSTPBPDUNumber of RSTP BPDU receivedro Counter32 .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1.10 |
hwdot1dStpTXRSTPBPDUNumber of RSTP BPDU transmittedro Counter32 .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1.11 |
hwdot1dStpClearStatisticsClear RSTP statistics. Read operation not supported.rw Enumeration .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1.12 |
hwdot1dSetStpDefaultPortCostSet PathCost back to the default setting. Read operation not supported.rw Enumeration .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1.13 |
hwdot1dStpRootGuardIf the port guard root bridge. Other bridge which want to be root can not become root through this port if enabled.rw EnabledStatus .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1.14 |
hwdot1dStpLoopGuardLoop guard function that keep a root port or an alternate port in discarding state while the information on the port is aged out.rw EnabledStatus .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1.15 |
hwdot1dStpPortBlockedReasonRecord the block reason of the port. notBlock (1) means that the port is not in block state,. blockForProtocol (2) means that the port is blocked by stp protocol to avoid loop. blockForRootGuard(3) means that the root guard flag of bridge is set and a better message received from the port,and the port is blocked. blockForBPDUGuard(4) means that the port has been configured as an edge port and receive a BPDU and thus blocked. blockForLoopGuard(5) means that the port is blocked for loopguarded.ro Enumeration .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1.16 |
hwdot1dStpRXTCBPDUThe number of received TC BPDUsro Counter32 .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1.17 |
hwdot1dStpPortSendingBPDUTypeType of BPDU which the port is sending.ro Enumeration .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1.18 |
hwdot1dStpOperPortPointToPointThis object indicates whether the port has connected to a point-to-point link or not. The administrative value should be read from hwdot1dStpPortPointToPoint.ro Enumeration .1.3.6.1.4.1.43.45.1.2.23.1.6.1.5.1.19 |
hwDot1dStpBpduGuardIf BPDU guard enabled. The edge port will discard illegal BPDU when enabledrw EnabledStatus .1.3.6.1.4.1.43.45.1.2.23.1.6.1.6 |
hwDot1dStpRootTypeRoot type of the bridgerw Enumeration .1.3.6.1.4.1.43.45.1.2.23.1.6.1.7 |
hwDot1dTimeOutFactorTime Out Factor of the bridge.rw INTEGER .1.3.6.1.4.1.43.45.1.2.23.1.6.1.8 |
hwDot1dStpPathCostStandardPath Cost Standard of the bridge. Value 'dot1d-1998' is IEEE 802.1d standard in 1998, value 'dot1t' is IEEE 802.1t standard, and value 'legacy' is a private legacy standard.rw Enumeration .1.3.6.1.4.1.43.45.1.2.23.1.6.1.9 |
hwdot1dStpIgnoredVlanTableRSTP extended information of vlan SEQUENCE OF HwDot1dStpIgnoredVlanEntry .1.3.6.1.4.1.43.45.1.2.23.1.6.1.10 |
hwdot1dStpIgnoredVlanEntryRSTP extended information of the vlan HwDot1dStpIgnoredVlanEntry .1.3.6.1.4.1.43.45.1.2.23.1.6.1.10.1 |
hwdot1dVlanVlan id supportedro INTEGER .1.3.6.1.4.1.43.45.1.2.23.1.6.1.10.1.1 |
hwdot1dStpIgnoreWhether the vlan is stp Ignoredrw Enumeration .1.3.6.1.4.1.43.45.1.2.23.1.6.1.10.1.2 |
More MIBs from 3Com
Browse all 3ComMIBs →Standard SNMP MIB module defining data structures for A3Com-products-MIB.
The A3COM-HUAWEI-ENTITY-VENDORTYPE-OID-MIB defines vendor-specific object identifiers for H3C (Huawei) hardware to map physical components within the ENTITY-MIB's entPhysicalTable, enabling precise differentiation of device types and sub-components during SNMP-based inventory and topology discovery.
The A3COM-HUAWEI-CBQOS2-MIB enables configuration and runtime monitoring of Class-Based QoS (CBQoS) policies on H3C and Huawei network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (CAR, GTS, WRED, remarking), and policy application status across interfaces, VLANs, ATM PVCs, and Frame Relay PVCs.
The A3COM-HUAWEI-DOT11-APMT-MIB module monitors and manages A3COM and Huawei wireless Access Points (APs) by exposing real-time operational objects and statistical counters for 802.11 radio interfaces, association states, and BSS metrics. This MIB facilitates the collection of performance data and device status required for monitoring AP health, client association counts, and traffic statistics in both Fat and Fit AP deployment architectures.
Standard SNMP MIB module defining data structures for A3COM-SWITCHING-SYSTEMS-MIB.
The A3COM-HUAWEI-EPON-MIB module enables monitoring and configuration of Ethernet Passive Optical Network (EPON) ports on A3COM and Huawei devices, specifically tracking EFM PON parameters defined in IEEE Draft P802.3ah clauses 60, 64, and 65. This includes managing optical line terminal (OLT) and optical network unit (ONU) session states, port configurations, and physical layer statistics for fiber access networks.