XEDIA-VLAN-MIB
The XEDIA-VLAN-MIB enables monitoring and configuration of Xedia hardware VLAN interfaces, specifically tracking 802.1q tagged frame parameters and 802.1p priority queue assignments. This module provides access to counters and status objects required to manage Ethernet traffic segregation and Quality of Service (QoS) marking on Xedia network devices.
Imported Objects
Objects
17 total| Object Name |
|---|
xediaVlanMIBThis module defines objects for management of Xedia's support for VLANs and 802.1p and 802.1q Ethernet tagged frames. MODULE-IDENTITY .1.3.6.1.4.1.838.3.34 |
xVlanObjects OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.34.1 |
xVlanIDTableA table of VLAN IDs configured on Ethernet subinterfaces. SEQUENCE OF XVlanIDEntry .1.3.6.1.4.1.838.3.34.1.1 |
xVlanIDEntryAn association between an Ethernet subinterface and a VLAN ID. XVlanIDEntry .1.3.6.1.4.1.838.3.34.1.1.1 |
xVlanIDThe 12-bit VLAN ID used in the VLAN Tag header.rw Unsigned32 .1.3.6.1.4.1.838.3.34.1.1.1.1 |
xVlanConfigTableA table of configuration information applicable to VLANs indexed by Ethernet physical (integral) interface. SEQUENCE OF XVlanConfigEntry .1.3.6.1.4.1.838.3.34.1.2 |
xVlanConfigEntryVLAN configuration information for a particular Ethernet physical (integral) interface. XVlanConfigEntry .1.3.6.1.4.1.838.3.34.1.2.1 |
xVlanConfigAdmitTaggedFramesWhether 802.1q/802.1p tagged frames will be received by the box. If this value is false, the frames will be dropped.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.838.3.34.1.2.1.1 |
xVlanConfigAdmitConfiguredVlansOnlyWhether only those 802.1q tagged frames that contain a VLAN ID that has been configured on the box will be received. If this value is true, frames from VLANs with other VLAN IDs will be dropped. This variable does not apply to bridged traffic.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.838.3.34.1.2.1.2 |
xVlanConfigStripBridgedTagsWhether 802.1q/802.1p tagged frames that are being bridged will have the tag stripped out of the packet before it is forwarded. This variable does not apply to routed traffic.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.838.3.34.1.2.1.3 |
xVlanConfigGVRPWhether the GVRP protocol for dynamically informing the network of the VLAN IDs configured in the box is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.838.3.34.1.2.1.4 |
xVlanConfigGARPJoinTimeThe GARP Join time, in centiseconds. This variable is a component of the GVRP protocol.rw INTEGER .1.3.6.1.4.1.838.3.34.1.2.1.5 |
xVlanConformance OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.34.2 |
xVlanCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.34.2.1 |
xVlanComplianceThe compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB. Unknown .1.3.6.1.4.1.838.3.34.2.1.1 |
xVlanGroups OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.34.2.2 |
xVlanGroupThe set of all accessible objects in this MIB. Unknown .1.3.6.1.4.1.838.3.34.2.2.1 |
More MIBs from Xedia
Browse all XediaMIBs →The XEDIA-SYSTEM-MIB provides SNMP objects to monitor and manage system-level parameters, including hardware status, resource utilization, and operational state, specifically for Xedia embedded networking devices.
The XEDIA-NETWORK-ADDRESS-TRANSLATOR-MIB provides management objects for monitoring and configuring Xedia's proprietary Network Address Translator (NAT) devices, enabling the tracking of translation sessions, address pool utilization, and packet flow statistics between RFC1918 private networks and the public Internet.
The XEDIA-POLICY-MIB enables SNMP-based configuration and monitoring of routing policy definitions, including match conditions, action sets, and policy application states, specifically within Xedia networking hardware. This module provides granular visibility into the operational status and parameter values of traffic steering rules to facilitate automated policy enforcement and troubleshooting.
The XEDIA-IPSEC-MIB enables monitoring and configuration of Xedia IPsec VPN tunnel states, security associations, and cryptographic parameters on Xedia networking hardware. It provides specific objects for tracking tunnel establishment status, packet counters, and IPsec policy enforcement metrics to ensure secure data transmission integrity.
The XEDIA-IP-MIB extends standard IETF IP-MIB functionality to monitor and manage IP-layer parameters, interfaces, and routing statistics specifically within Xedia hardware platforms. This module provides vendor-specific object identifiers for tracking IP traffic counters, interface states, and protocol configurations on Xedia network devices.
The XEDIA-NETWORK-TIME-PROTOCOL-MIB enables monitoring of Xedia's RFC 1305-compliant Network Time Protocol (NTP) implementation to manage UTC synchronization states, server association parameters, and time offset metrics across network hosts.