XEDIA-SMDS-MIB
The XEDIA-SMDS-MIB extends standard RFC 1694 definitions to monitor and manage Switched Multimegabit Data Service (SMDS) interface statistics, error counters, and configuration parameters on Xedia network devices. This module enables granular visibility into SMDS virtual circuit states and performance metrics specific to Xedia hardware implementations.
Imported Objects
Objects
12 total| Object Name |
|---|
xediaSmdsMIBThis module defines additional objects for management of SMDS
in Xedia devices, above and beyond what is defined in the
standard rfc1694, and proposed drafts. MODULE-IDENTITY .1.3.6.1.4.1.838.3.22 |
xsmdsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.22.1 |
xipOverSMDSTableA list of SMDS ip subnets. SEQUENCE OF XipOverSMDSEntry .1.3.6.1.4.1.838.3.22.1.1 |
xipOverSMDSEntryAn entry containing additional management information
applicable to a particular SMDS IP subnet. XipOverSMDSEntry .1.3.6.1.4.1.838.3.22.1.1.1 |
xipOverSMDSRowStatusThis variable displays the status of the entry.
Setting it to 'destroy' or 'notInService' removes
the entry from the table. Setting it to either
'create', or 'active' will add a row
to the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.838.3.22.1.1.1.1 |
xsipDxiTableThe DXI table. SEQUENCE OF XsipDxiEntry .1.3.6.1.4.1.838.3.22.1.2 |
xsipDxiEntryAn entry in the DXI table. XsipDxiEntry .1.3.6.1.4.1.838.3.22.1.2.1 |
xsipDxiHeartbeatIntervalThe number of seconds between succesive
heartbeat poll messages. ) means no
hearbetat polls will be sent.rw INTEGER .1.3.6.1.4.1.838.3.22.1.2.1.1 |
xsipDxiHeartbeatFailureCountThe number of unanswered heartbeat poll
messages before the link will be declared
down. 0 means the link wil never be declared
down due to unanswered heartbeats.rw INTEGER .1.3.6.1.4.1.838.3.22.1.2.1.2 |
xsmdsConformance OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.22.2 |
xipOverSMDSCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.22.2.1 |
xipOverSMDSGroups OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.22.2.2 |
More MIBs from Xedia
Browse all XediaMIBs →The XEDIA-SYSTEM-MIB provides SNMP objects to monitor and manage system-level parameters, including hardware status, resource utilization, and operational state, specifically for Xedia embedded networking devices.
The XEDIA-NETWORK-ADDRESS-TRANSLATOR-MIB provides management objects for monitoring and configuring Xedia's proprietary Network Address Translator (NAT) devices, enabling the tracking of translation sessions, address pool utilization, and packet flow statistics between RFC1918 private networks and the public Internet.
The XEDIA-POLICY-MIB enables SNMP-based configuration and monitoring of routing policy definitions, including match conditions, action sets, and policy application states, specifically within Xedia networking hardware. This module provides granular visibility into the operational status and parameter values of traffic steering rules to facilitate automated policy enforcement and troubleshooting.
The XEDIA-IPSEC-MIB enables monitoring and configuration of Xedia IPsec VPN tunnel states, security associations, and cryptographic parameters on Xedia networking hardware. It provides specific objects for tracking tunnel establishment status, packet counters, and IPsec policy enforcement metrics to ensure secure data transmission integrity.
The XEDIA-IP-MIB extends standard IETF IP-MIB functionality to monitor and manage IP-layer parameters, interfaces, and routing statistics specifically within Xedia hardware platforms. This module provides vendor-specific object identifiers for tracking IP traffic counters, interface states, and protocol configurations on Xedia network devices.
The XEDIA-NETWORK-TIME-PROTOCOL-MIB enables monitoring of Xedia's RFC 1305-compliant Network Time Protocol (NTP) implementation to manage UTC synchronization states, server association parameters, and time offset metrics across network hosts.