XEDIA-RADIUS-MIB
AI MIB Summary
The XEDIA-RADIUS-MIB extends standard RADIUS monitoring capabilities on Xedia hardware to track session states, authentication failures, and accounting metrics beyond the scope of generic protocol drafts. It enables granular visibility into RADIUS server interactions, including user session counts, response times, and specific vendor-attribute counters for troubleshooting authentication and authorization processes.
This module defines additional objects for management of Radius in Xedia devices, above and beyond what is defined in the proposed drafts.
Main OID:
xediaRadiusMIB.1.3.6.1.4.1.838.3.16
78
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
78 total| Object Name |
|---|
xediaRadiusMIBThis module defines additional objects for management of Radius in Xedia devices, above and beyond what is defined in the proposed drafts. MODULE-IDENTITY .1.3.6.1.4.1.838.3.16 |
xRadiusObjects OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.16.1 |
xRadiuscObjects OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.16.1.1 |
xRadiuscGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.16.1.1.1 |
xRadiuscGlobalCfg OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.16.1.1.1.1 |
xradiuscAdminAuthStatusThe administrative status of Radius Authentication in the router. Changing this parameter may require a node boot to take affect.rw Enumeration .1.3.6.1.4.1.838.3.16.1.1.1.1.1 |
xradiuscAdminActgStatusThe administrative status of Radius Accounting in the router. Changing this parameter may require a node boot to take affect.rw Enumeration .1.3.6.1.4.1.838.3.16.1.1.1.1.2 |
xradiuscDebugCmdThe control for dumping in/out radius packets, and error/trace messages to the console. Although the summary of commands is displayed when read, command modifications must be done one at a time.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.838.3.16.1.1.1.1.3 |
xradiuscNasIdThe NAS ID assigned to this node.rw DisplayString .1.3.6.1.4.1.838.3.16.1.1.1.1.4 |
xradiuscNasIPThe NAS IP Address assigned to this node.rw IpAddress .1.3.6.1.4.1.838.3.16.1.1.1.1.5 |
xradiuscBackgroundTimerThe number of seconds inwhich the background task will perform cleanup.rw INTEGER .1.3.6.1.4.1.838.3.16.1.1.1.1.6 |
xradiuscMaxOutstandingThe maximum number of outstanding resquests.rw INTEGER .1.3.6.1.4.1.838.3.16.1.1.1.1.7 |
xRadiuscGlobalStat OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.16.1.1.1.2 |
xradiuscOperAuthStatusThe ccurrent operational state of Radius Authentication on the router.ro Enumeration .1.3.6.1.4.1.838.3.16.1.1.1.2.1 |
xradiuscOperActgStatusThe ccurrent operational state of Radius Accounting on the router.ro Enumeration .1.3.6.1.4.1.838.3.16.1.1.1.2.2 |
xradiuscOperNasIdThe NAS ID assigned to this node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.838.3.16.1.1.1.2.3 |
xradiuscOperNasIPThe NAS IP Address currently being used.ro IpAddress .1.3.6.1.4.1.838.3.16.1.1.1.2.4 |
xradiuscOperGenErrorsThe number of general errors encounted by the Radius Client Task.ro Counter32 .1.3.6.1.4.1.838.3.16.1.1.1.2.5 |
xradiuscOperAuthQCurrThe current number of elements in the Authentication queue.ro Integer32 .1.3.6.1.4.1.838.3.16.1.1.1.2.6 |
xradiuscOperAuthQMaxThe maximum number of elements in the Authentication queue at one time.ro Gauge32 .1.3.6.1.4.1.838.3.16.1.1.1.2.7 |
xradiuscOperAuthExpectedThe expected number of elements in the Authentication queue by monitoring the enqueue/dequeue operations.ro Integer32 .1.3.6.1.4.1.838.3.16.1.1.1.2.8 |
xradiuscOperAuthEnqueuedThe number of requested posted to the Authentication queue.ro Counter32 .1.3.6.1.4.1.838.3.16.1.1.1.2.9 |
xradiuscOperAuthDequeuedThe number of requested removed from the Authentication queue.ro Counter32 .1.3.6.1.4.1.838.3.16.1.1.1.2.10 |
xradiuscOperActgQCurrThe current number of elements in the Accounting queue.ro Integer32 .1.3.6.1.4.1.838.3.16.1.1.1.2.11 |
xradiuscOperActgQMaxThe maximum number of elements in the Accounting queue at one time.ro Gauge32 .1.3.6.1.4.1.838.3.16.1.1.1.2.12 |
xradiuscOperActgExpectedThe expected number of elements in the Accounting queue by monitoring the enqueue/dequeue operations.ro Integer32 .1.3.6.1.4.1.838.3.16.1.1.1.2.13 |
xradiuscOperActgEnqueuedThe number of requested posted to the Accounting queue.ro Counter32 .1.3.6.1.4.1.838.3.16.1.1.1.2.14 |
xradiuscOperActgDequeuedThe number of requested removed from the Accounting queue.ro Counter32 .1.3.6.1.4.1.838.3.16.1.1.1.2.15 |
xradiuscOperPendingListCurrThe current number of Authentication and Accounting requests Pending.ro Integer32 .1.3.6.1.4.1.838.3.16.1.1.1.2.16 |
xradiuscOperPendingListMaxThe maximum number of Authentication and Accounting requests Pending at one time.ro Gauge32 .1.3.6.1.4.1.838.3.16.1.1.1.2.17 |
xradiuscOperPendingExpectedThe expected number of elements in the Pending list by monitoring the enqueue/dequeue operations.ro Integer32 .1.3.6.1.4.1.838.3.16.1.1.1.2.18 |
xradiuscOperPendingEnqueuedThe number of requested posted to the Pending list.ro Counter32 .1.3.6.1.4.1.838.3.16.1.1.1.2.19 |
xradiuscOperPendingDequeuedThe number of requested removed from the Pending list.ro Counter32 .1.3.6.1.4.1.838.3.16.1.1.1.2.20 |
xradiuscOperLastPktIDThe last Packet ID that was used.ro Integer32 .1.3.6.1.4.1.838.3.16.1.1.1.2.21 |
xradiuscOperNextPktIDThe next Packet ID that will most likely be used.ro Integer32 .1.3.6.1.4.1.838.3.16.1.1.1.2.22 |
xradiuscOperLastAuthIndexThe index of the last authentication server used.ro Integer32 .1.3.6.1.4.1.838.3.16.1.1.1.2.23 |
xradiuscOperLastActgIndexThe index of the last accounting server used.ro Integer32 .1.3.6.1.4.1.838.3.16.1.1.1.2.24 |
xRadiuscAuthentication OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.16.1.1.2 |
xRadiuscAuthSvrTableA list of Radius Client Authentication Server entries. SEQUENCE OF XRadiuscAuthSvrEntry .1.3.6.1.4.1.838.3.16.1.1.2.1 |
xRadiuscAuthSvrEntryAn entry containing additional management information applicable to a particular Radius Client Authentication Server. XRadiuscAuthSvrEntry .1.3.6.1.4.1.838.3.16.1.1.2.1.1 |
xradiuscAuthSvrIpAddressThe IP Address of the specified Authentication Server. If this address is configured, it is used exclusively to communicate with this server.rw IpAddress .1.3.6.1.4.1.838.3.16.1.1.2.1.1.1 |
xradiuscAuthSvrNameThe name identifying the specified Authentication Server. If no IP Address is configured, then this name MAY be used during a DNS lookup.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.838.3.16.1.1.2.1.1.2 |
xradiuscAuthSvrPortThe udp port number that the specified Authentication Server is listening for requests.rw INTEGER .1.3.6.1.4.1.838.3.16.1.1.2.1.1.3 |
xradiuscAuthSvrTimeoutThe number of seconds to wait for a response to a resquests.rw INTEGER .1.3.6.1.4.1.838.3.16.1.1.2.1.1.4 |
xradiuscAuthSvrRetriesThe number of times to resend the server a requests when no response has been received.rw INTEGER .1.3.6.1.4.1.838.3.16.1.1.2.1.1.5 |
xradiuscAuthSvrPriorityThe priority assigned to this server. Lowest priority servers are used first. In the case of multiple servers having the same priority, they will be used in a round- robin fashion when their priority is the highest of the available servers.rw INTEGER .1.3.6.1.4.1.838.3.16.1.1.2.1.1.6 |
xradiuscAuthSvrSecretKeyThe shared secret key associated with the specified server. It is used to 'hide' user passwords and authenticate requests and responses. When this object is read from a non-superuser, '--------' is returned in order to maintain security.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.838.3.16.1.1.2.1.1.7 |
xradiuscAuthSvrVendorOffsetThe offset used to assign Vendor Specific attribute IDs to the standard attribute number space. Setting this value to 0, forces the encoding of Vendor Specific attributes within the Vendor's number space, using the standard 'Vendor-Specific' attribute. Setting this to a non-zero value uses standard attribute encoding, with the Vendor Specific Base for the attributes beginning with this offset.rw INTEGER .1.3.6.1.4.1.838.3.16.1.1.2.1.1.8 |
xradiuscAuthSvrOperIpAddressThe IP Address currently being used to communicate the specified Authentication server.ro IpAddress .1.3.6.1.4.1.838.3.16.1.1.2.1.1.9 |
xradiuscAuthSvrOperStateThe operational state of the specified Authentication server. The 'unknown' state will be set periodically to allow 'notResponding' servers to be retried after a period of time.ro Enumeration .1.3.6.1.4.1.838.3.16.1.1.2.1.1.10 |
xradiuscAuthSvrOperStateChangeThe value of sysUpTime when the Authentication server last changed state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.838.3.16.1.1.2.1.1.11 |
xradiuscAuthSvrOperBadPktIdsThe count of unexpected Packet IDs received on this port.ro Counter32 .1.3.6.1.4.1.838.3.16.1.1.2.1.1.12 |
xradiuscAuthSvrOperRxErrorsThe count of general Receive errors encountered by this serverro Counter32 .1.3.6.1.4.1.838.3.16.1.1.2.1.1.13 |
xradiuscAuthSvrOperTxErrorsThe count of general Transmit errors encountered by this serverro Counter32 .1.3.6.1.4.1.838.3.16.1.1.2.1.1.14 |
xradiuscAuthSvrRowStatusThis variable displays the status of the entry. Setting it to 'destroy' marks the entry as removed. Eventually, when no other applications depend on that particular resource, it will be completely removed from the table. Setting it to either 'create', or 'active' will add a row to the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.838.3.16.1.1.2.1.1.15 |
xRadiuscAccounting OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.16.1.1.3 |
xRadiuscActgSvrTableA list of Radius Client Accounting Server entries. SEQUENCE OF XRadiuscActgSvrEntry .1.3.6.1.4.1.838.3.16.1.1.3.1 |
xRadiuscActgSvrEntryAn entry containing additional management information applicable to a particular Radius Client Accounting Server. XRadiuscActgSvrEntry .1.3.6.1.4.1.838.3.16.1.1.3.1.1 |
xradiuscActgSvrIpAddressThe IP Address of the specified Accounting Server. If this address is configured, it is used exclusively to communicate with this server.rw IpAddress .1.3.6.1.4.1.838.3.16.1.1.3.1.1.1 |
xradiuscActgSvrNameThe name identifying the specified Accounting Server. If no IP Address is configured, then this name MAY be used during a DNS lookup.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.838.3.16.1.1.3.1.1.2 |
xradiuscActgSvrPortThe udp port number that the specified Accounting Server is listening for requests.rw INTEGER .1.3.6.1.4.1.838.3.16.1.1.3.1.1.3 |
xradiuscActgSvrTimeoutThe number of seconds to wait for a response to a resquests.rw INTEGER .1.3.6.1.4.1.838.3.16.1.1.3.1.1.4 |
xradiuscActgSvrRetriesThe number of times to resend the server a requests when no response has been received.rw INTEGER .1.3.6.1.4.1.838.3.16.1.1.3.1.1.5 |
xradiuscActgSvrPriorityThe priority assigned to this server. Lowest priority servers are used first. In the case of multiple servers having the same priority, they will be used in a round- robin fashion when their priority is the highest of the available servers.rw INTEGER .1.3.6.1.4.1.838.3.16.1.1.3.1.1.6 |
xradiuscActgSvrSecretKeyThe shared secret key associated with the specified server. It is used to authenticate requests and responses. When this object is read from a non-superuser, '--------' is returned in order to maintain security.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.838.3.16.1.1.3.1.1.7 |
xradiuscActgSvrVendorOffsetThe offset used to assign Vendor Specific attribute IDs to the standard attribute number space. Setting this value to 0, forces the encoding of Vendor Specific attributes within the Vendor's number space, using the standard 'Vendor-Specific' attribute. Setting this to a non-zero value uses standard attribute encoding, with the Vendor Specific Base for the attributes beginning with this offset.rw INTEGER .1.3.6.1.4.1.838.3.16.1.1.3.1.1.8 |
xradiuscActgSvrOperIpAddressThe IP Address currently being used to communicate the specified Accounting server.ro IpAddress .1.3.6.1.4.1.838.3.16.1.1.3.1.1.9 |
xradiuscActgSvrOperStateThe operational state of the specified Accounting server. The 'unknown' state will be set periodically to allow 'notResponding' servers to be retried after a period of time.ro Enumeration .1.3.6.1.4.1.838.3.16.1.1.3.1.1.10 |
xradiuscActgSvrOperStateChangeThe value of sysUpTime when the Accounting server last changed state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.838.3.16.1.1.3.1.1.11 |
xradiuscActgSvrOperBadPktIdsThe count of unexpected Packet IDs received on this port.ro Counter32 .1.3.6.1.4.1.838.3.16.1.1.3.1.1.12 |
xradiuscActgSvrOperRxErrorsThe count of general Receive errors encountered by this serverro Counter32 .1.3.6.1.4.1.838.3.16.1.1.3.1.1.13 |
xradiuscActgSvrOperTxErrorsThe count of general Transmit errors encountered by this serverro Counter32 .1.3.6.1.4.1.838.3.16.1.1.3.1.1.14 |
xradiuscActgSvrRowStatusThis variable displays the status of the entry. Setting it to 'destroy' marks the entry as removed. Eventually, when no other applications depend on that particular resource, it will be completely removed from the table. Setting it to either 'create', or 'active' will add a row to the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.838.3.16.1.1.3.1.1.15 |
xRadiusConformance OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.16.2 |
xradiusCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.16.2.1 |
xradiusComplianceThe compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB. Unknown .1.3.6.1.4.1.838.3.16.2.1.1 |
xradiusGroups OBJECT IDENTIFIER .1.3.6.1.4.1.838.3.16.2.2 |
xradiusAllGroupThe set of all accessible objects in this MIB. Unknown .1.3.6.1.4.1.838.3.16.2.2.1 |
More MIBs from Xedia
Browse all XediaMIBs →XEDIA-SYSTEM-MIB
The XEDIA-SYSTEM-MIB provides SNMP objects to monitor and manage system-level parameters, including hardware status, resource utilization, and operational state, specifically for Xedia embedded networking devices.
211 objects→
XEDIA-NETWORK-ADDRESS-TRANSLATOR-MIB
The XEDIA-NETWORK-ADDRESS-TRANSLATOR-MIB provides management objects for monitoring and configuring Xedia's proprietary Network Address Translator (NAT) devices, enabling the tracking of translation sessions, address pool utilization, and packet flow statistics between RFC1918 private networks and the public Internet.
124 objects→
XEDIA-POLICY-MIB
The XEDIA-POLICY-MIB enables SNMP-based configuration and monitoring of routing policy definitions, including match conditions, action sets, and policy application states, specifically within Xedia networking hardware. This module provides granular visibility into the operational status and parameter values of traffic steering rules to facilitate automated policy enforcement and troubleshooting.
117 objects→
XEDIA-IPSEC-MIB
The XEDIA-IPSEC-MIB enables monitoring and configuration of Xedia IPsec VPN tunnel states, security associations, and cryptographic parameters on Xedia networking hardware. It provides specific objects for tracking tunnel establishment status, packet counters, and IPsec policy enforcement metrics to ensure secure data transmission integrity.
96 objects→
XEDIA-IP-MIB
The XEDIA-IP-MIB extends standard IETF IP-MIB functionality to monitor and manage IP-layer parameters, interfaces, and routing statistics specifically within Xedia hardware platforms. This module provides vendor-specific object identifiers for tracking IP traffic counters, interface states, and protocol configurations on Xedia network devices.
88 objects→
XEDIA-NETWORK-TIME-PROTOCOL-MIB
The XEDIA-NETWORK-TIME-PROTOCOL-MIB enables monitoring of Xedia's RFC 1305-compliant Network Time Protocol (NTP) implementation to manage UTC synchronization states, server association parameters, and time offset metrics across network hosts.
83 objects→